13" MacBook Pro - Screen Flicker / Windows 7 Bootcamp

I have a 13" MackBook Pro with Retina display that I purchased last December (8 months old).  I am running Windows 7 in Bootcamp and the last few months the screen flickers on occasion (becoming more frequent).  I launched the Mac OS to ensure I have the latest updates and I believe I do (nothing new to install within the Mac OS).  Majority of the time I'm hooked up to an external monitor / lid is closed, but obviously that is a challenge when traveling. 
I did do some searches and see other posts around screen flicker issues, but those appear to be on the Mac OS side.  What is odd about my scenario is that it only seems to appear on the Windows 7 side.  I can't seem to find a fix for this / really would hate to have to reload the machine.

Running Windows 7 Ultimate x64 on my brand new 15" MBP right now.
The only problem I'm having is the USB controller issue that is reported in the following thread:
http://discussions.apple.com/thread.jspa?threadID=2411685&start=30&tstart=0
I ran the Boot Camp assistant, made the partition, rebooted with my 7 DVD, formatted the partition, performed a clean installation, & then installed the drivers from the OSX DVD when Windows booted the first time.
Replaced the NVIDIA drivers with the latest Verde release. 258.96notebook_winvista_win7_64bit_internationalwhql.exe
Everything seems to be running just fine at this point.
Message was edited by: jdamien75

Similar Messages

  • Mid-2010 Macbook Pro Screen Flicker Pixel Seizure

    Not sure how else to describe the problem, but I hope the title helps!
    I have a mid-2010 15" MacBook Pro. I noticed in the last month or so, my screen would flicker. But not the entire screen. Just certain areas, like the pixels would jump/lag, as if it it would jump to the correct position. I don't know what's the word for it: glitter, pixel, flicker, seizure. I mean, that what it looks like. It actually hurts my eyes.
    I don't know what could be the problem or if anyone knows what's going on. It's just certain pixels (random on the screen, but usually right in the middle) that get "stuck" and half a second later, jump. Not sure what the proper word is, but if anyone could identify it, that'll be great.
    Safari, Chrome, and Word are the applications I use, and I've seen it all three programs. It's becoming a lot more noticeable and frequent now, especially if I switch programs or if I'm loading a new page.
    The MBP is a tank, but I've been considering buying a new MacBook, preferably the Air, until this MBP kicks it, so if anyone has estimation on its shelf life, that'll be great (My 2005 Powerbook G4 barely made it through 4 years!). The warranty on the MBP just expired last year.
    Thanks in advance, I appreciate any insight on the issue.

    Curiously, I don't have that option. It only gives me the option to disable Automatic graphics switching where it should give the better battery life or higher performance options. Do I have something disabled that gets rid of that option? It's the same under the Battery or Power Adapter options.
    I'm going to take it to a genius but I'm wondering from reading other forums that maybe one of my RAM slots is bad. I want to have a play but will the genius know if I've opened it up and then possibly refuse it? If it is bad RAM then I can fix that myself without having to travel 70 miles to my nearest Apple Store. Is there a seal that I would break that would give away the fact that I've opened it up?
    Thanks for the advice so far.

  • Macbook pro screen flicker

    I have a mid 2010 macbook pro that after about 10-20 minutes of use the screen backlight will start to dim out and have no brightness control then comes imeditly back on still with no brightness control and will go bright and dim repetedly.  but when the computer is doing this you can shut the screen and open it back up and it is back to normal for about 10-20 more minutes.  sounds to me like it is a software issue because the computer is running 10.6.3,  what do you guys think this could be.  is it something major or minor because the keyboard backlight works fine.  thanks for the help

    Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
    If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
    Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
    Kernel Extensions in backtrace (with dependencies):         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
    Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceeded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all.
    So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. They should be more than willing to install a new logic board at no cost. I have no idea why this faulty GPU is making the headline here on the MacBook Pro forum so often now - could it be because Mountain Lion is just bring the issue to a head more readily? I don't know - I only know that we're seeing more and more of these kernel panics of late.
    Good luck,
    Clinton

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • MacBook Pro Core i7 + Windows 7 Bootcamp issues

    I recently bought a brand new MacBook Pro Core i7 2.66Ghz with 8GB Ram and 500GB 7200rpm HD and Hi-Res display.
    When I received it, I updated all Mac OS X software via software update.
    I then created a 70GB Bootcamp partition to install a new full copy of Window 7 Ultimate.
    I started with the 64bit version of Win 7, but as has been noted here there are some issues with the driver packages and even after managing to get the 64bit version of the Bootcamp 3.1 driver package update to install in Windows (having first installed Bootcamp 3.0 drivers), the wireless driver would not install or work, nor would the NVidia driver, so I had a very odd display aspect and low res support. There may well have been other drivers not working either, but these two really stood out.
    Despite the Bootcamp 3.1 driver package apparently being installed (as reported by "About Bootcamp", the 3.1 package was still being offered to me in Apple Software Update. I tried to install again, and again it still showed as being available to install. Obviously some issue's here.
    So I decided to try the Windows 7 32bit edition instead, as I don't necessarily need the 64bit version to run the Windows apps I need.
    I deleted the Bootcamp partition and started again. I ended up in the exact same situation with Windows 7 32bit as I had done with Windows 7 64bit - wireless device without a driver, NVidia drivers not installed. This time I had used the Bootcamp 32bit driver packages.
    In the end I've opted to just install it via VMware as a pure virtual machine. This works fine, but for what I do in Windows, I prefer to have a Bootcamp setup.
    Is there a general issue with the new MacBook Pro's and Windows 7 despite Apple releasing updated driver packages? Do these new driver packages handle the dual GPU setup properly?
    I have read a number of "How to's..." for installing Windows 7 on the a MacBook Pro, but none have been successful for me. Am I wasting my time for now and need to wait for Apple to update Bootcamp for the 2010 MacBook Pro's, or am I just missing something in the way I'm doing this? I can't believe it shouldn't be this hard?

    Running Windows 7 Ultimate x64 on my brand new 15" MBP right now.
    The only problem I'm having is the USB controller issue that is reported in the following thread:
    http://discussions.apple.com/thread.jspa?threadID=2411685&start=30&tstart=0
    I ran the Boot Camp assistant, made the partition, rebooted with my 7 DVD, formatted the partition, performed a clean installation, & then installed the drivers from the OSX DVD when Windows booted the first time.
    Replaced the NVIDIA drivers with the latest Verde release. 258.96notebook_winvista_win7_64bit_internationalwhql.exe
    Everything seems to be running just fine at this point.
    Message was edited by: jdamien75

  • Can I run a windows software program taht is on a CD on my macbook pro after I install bootcamp and windows xp home?

    Can I run a windows software program that is on a CD on my macbook pro after I install bootcamp and windows xp home?

    genepaquin,
    the last MacBook Pros that supported installing Windows XP in a Boot Camp partition are the Mid 2010 models. If your MacBook Pro is newer than that, and you don’t have a newer version of Windows to install into a Boot Camp partition on your MacBook Pro, then you might consider an alternative such as running Windows with the help of programs such as VirtualBox or Parallels Desktop rather than through Boot Camp.

  • MacBook Pro crashes on Windows 7 Boot

    Hey,
    I just bought a new 2010 13 inch macbook pro, and installed Windows 7 on it. When I boot Windows 7 I can use it for like 20 seconds and then later the mouse cursor gets stuck and nothing works. Both the keyboard and the mouse both dont respond to anything I do.
    Just worth mentioning: I installed all the updates before installing Windows 7 and installed the windows 7 drivers after the installation finished.

    So just to be sure, you have the Apple BootCamp control panel and other devices.
    You checked device manager.
    Might want to run msconig and for me, I disable and uninstall what I don't want running and don't use (Bonjour, MobileMe, etc).
    Your OEM DVD is newer than the Boot Camp 3.1, so if you did install 3.1 I would suspect it is at fault.
    Mouse and keyboard seem to (again) be common complaints. Also graphic drivers.
    Make sure you have room for and using System Restore points and can "roll back" and driver update you made.

  • Retina Macbook Pro 13" on Windows 8 Wifi Stops Receiving Data

    Hello!
    I am running a Retina Macbook Pro 13" with Windows 8 Bootcamp. Recently I have discovered that my laptop internet stops working. When I boot it up in windows I will be able to use the internet for an average of around 30 seconds before it stops loading pages but it is still connected to the network. The only way I can actually use the internet is if I keep reconnnecting to my WiFi network every minute or so.
    Can anyone help me with this issue?

    I'm having a similar issue on my brand new MacBook Pro Retina 15". Internet seems to run fine on my windows side, but when I bootcamp into Windows 7, using my ethernet adapter, downloads seem to only get between 80mb-200mb done before it just stops, and I have to restart. I can browse the internet completely fine (and quickly) but downloading large files seems to cause an issue.
    I had to download a Broadcom NetXtreme Gigabit Ethernet driver to get the adapter to work, and I'm wondering if perhaps I have the wrong driver? It's weird that it works though....I also downloaded 7.5GB of Team Fortress 2 seemingly fine the first night, but I think thats because Steam is able to force a reconnect even if it stops working.
    Anyway, any help would be appreciated.

  • How do I resize Photoshop - it's too large for my Macbook Pro screen and I can't get to the resize corners?

    Photoshop is too large for my Macbook Pro screen.  I cannot access the resize handles - they're off the screen and I can't drag it.  Any solution?

    Do you see the red, yellow, and red window buttons? If so click on the green one.
    If you don't see them then you are possibly in full screen mode, and pressing the "F" key once or twice allow you to get back to normal mode.

  • The very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices

    the very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices, any ideas?

    Back up all data.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    defaults delete -g NSFullScreenDarkMenu
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V.
    Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Log out and log back in.

  • I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    Hi LamboMong,
    just try this:
    http://refit.sourceforge.net
    install, reboot twice and choose the Windows-Partition on next startup.
    (The apple-bootloader doesn't display all bootable harddisks.
    With rEFIt you can boot from all partitions/harddisks on your computer.)
    I hope that will solve your problem.
    Daniel Fernau

  • How to access my macbook pro from a windows pc?

    how to access my macbook pro from a windows pc?

    Depending on what you mean by "access" the following may help:
    File sharing: How to connect with File Sharing on your Mac - Apple Support
    One way (and there are others) for remote control and remote access between Mac and Windows: http://www.teamviewer.com/en/index.aspx

  • I am trying to connect my macbook pro to a windows 7 server pc.

    I am trying to connect my macbook pro to a windows 7 server pc. I keep getting a connection failed message  saying "The server is available on your computer. Access the volumes and files locally". Any ideas on how to resolve this? I cannot find the the volumes or know where to look for this volume

    Depends on your model TV.   Read your TV user manual.  The newer models have "how to hookup" instructions for computer & games.
    You can also do a forum search as well as a Google search.

  • TS1367 My MacBook Pro screen won't turn on makes a repeating 3 beep sound

    The screen to my MacBook Pro screen wont turn on and when I push the power button it just makes a 3 beep sound repeatedly. Is there any way t. Fix this or should I go to the store?

    Take it in for service.
    Apple Store appointments: http://apple.com/retail/geniusbar.

  • Using Migration Assistant to move files from old PC laptop to new MacBook Pro that has Windows 8 installed containing Outlook

    When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?

    I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
    For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
    Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
    A better place to ask this question would be on the MS Office for Mac forums.
    Hope it all works out for you.

Maybe you are looking for

  • Writing to file and GUI

    Hi all, I am developing an application that attempts to write text, a bank account record detailing 4 fields, to a file, the user interface is a GUI with 3 buttons. On pressing one of these buttons the user is presented with another GUI application,

  • Conditional Formula in Customer Statements

    Hi Experts, I would like to be able to show various different office addresses in the header of my customer statements. The addresses are dependent on GroupCode of the BP.  ALL the statements are printed by the same user, so I cannot use different st

  • Problem while sending RTP stream to QuickTime player

    Hello, I am trying to send a RTP video stream from a local file to a Quicktime player. The player is waiting for the stream in its default ports (6970/6971). I archieve this by using my own RTSP server. I start the transmission by using a processor a

  • C++ data plug-in for DIAdem

    Hello, I need to developp a C++ data plug-in for DIADem, I read it's possible, but I don't find any information about how to do this. I downloaded the labview_dataplugin_sdk_2011.exe because I'm using DIAdem 2011. Does someone now how to do this in C

  • CRM Survey Analysis

    HI Experts Please advise standard extractor for CRM Survey analysis. 0SVY_DATA_1 is not sufficing the requirement. KPI Number of  Effective visits Number of Planned Visits Number of executed surveys Number of planned surveys Number of effective visit