1300 series psc, I wish to uninstall

My print function has stopped working. I am advised to uninstall the program and then reinstall. I have 14 hp programs on my computer which one is for the printer?

awade1941 wrote:
My print function has stopped working. I am advised to uninstall the program and then reinstall.
Hi,
My guessing: most likely the driver, you can download driver from the following site, you need to select the OS on your machine.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Sorry I don't know what you already have with14 programs.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Hp psc 1300 series all in one driver

my hp 1300 series printer is not having drivers, i have tried in many ways. but useless effort. At last i came here for all of our friends support, those who are using these above hp 1300 series all-in-one printers. friends please help me in this issue to get a driver for my printer. Thanking you all.

Hi talamala,
if you go to the link below, and under "detect MY Product" on the right, click find now, this should hopefully identify the driver you need
http://www8.hp.com/ie/en/drivers.html
if that doesn;t work, please let me know what OS you are using and the exact model number of your printer I think psc 1300 is the series number not the model number.
regards,
Na-Vi
I am an HP employee, I am speaking for myself and not on behalf of HP.
Click the thumbs up to say "Thanks." Mark Accepted Solution on the post that solves your problem

HP PSC 1300 Series printer does not print the entire last line on page

Using an HP PSC 1310 series printer (1315xi I think). Just changed computers and OS from winXP to Win7 Professional. Now the very bottom line on my checks only shows the top 10% of that last line. There is a 1-inch margin at the bottom of 11.5" LETTER paper. There is no problem if I use another printer (HP PSC 1210xi). Is there an updated 1310 series driver that wasn't automatically selected by Win7Prof when I switched computers?

I see no way to adjust the margins on the printer. When I click 'Printer Properties - Effects' the Margins area has nothing I can change and even though there is a box to Minimize Margins, it cannot be clicked. Using the Resizing Option to reduce page to 95% does not pull the last line into the printable area. I can print the file to PDF using doPDF v7 and then see the printable white area that goes just under the last line when I choose the 1210xi printer, but when I select the 1300 series printer the white area moves slightly upward just above most of the last line to be printed. I can't choose the pdf selection to fit or shrink to printer because that distorts the page on my pre-printed checks, so I must choose Page Scaling as 'None'. My checks printed fine on the old computer with XP and using the same PSC 1300 printer. I've also tried to print to another printer that prints the last line with no problem.

Conection 1300 series Aironet As Access Point

I´m thinking to install a 1300 series Cisco aironet on my network, i wish this network can offers remote access to my network as a Access point to Laptop or pc than works with a 54MB/s and 11 MB/s. I should configured my AP as a Repeater of my network. well all you can help. i really glad you.

Hi Luis,
Here are some docs for the 1300 to get you started:
Cisco Aironet 1300 Series
Read Me First
http://www.cisco.com/en/US/products/ps5861/products_quick_start09186a00804fbd81.html
Configuring the Access Point/Bridge as an Access Point
http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a008021e5e4.html#wp1043091
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Software Configuration Guide, 12.3(4) JA
http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_book09186a008041369a.html
Hope this helps!
Rob
Please remember to rate helpful posts......

I have a new computer. I wish to uninstall Lightroom5 and photoshopCC on old computer and re-install on new computer. How do I do this. Also, Lightroom catalog is currently on external drive. Will Lightroom recognize it on new computer

I have a new computer. I wish to uninstall Lightroom5 and photoshopCC on old computer and re-install on new computer. How do I do this. Also, Lightroom catalog is currently on external drive. Will Lightroom recognize it on new computer

Hello Francinera,
please have a first look here: Activation & deactivation help >>> http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.
Please come back if necessary.
Good luck!
Hans-Günter

Cisco Aironet 1300 series

Hello,
i have 2 cisco aironet 1300 series configured as root bridge and non root bridge, i managed to configure them and they are associating only when they adjacent , when i separate them them communication fail , could you please help me to solve this . thx

Those are very old bridges. So if they are still functioning okay, do they require external antennas or not and do you have external antennas if they do?
Antenna Interface
• AIR-BR1310G-x-K9 or AIR-LAP1310G-x-K9: Air interface (integrated directional antenna)
• AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R: Two RP-TNC type connectors for external antennas
-Scott

Trouble with Aironet 1300 series

I have a cisco aironet 1300 series and i need to reset it back to factory default. the directions say push the mode button while the access point is off and then turn it on while the mode button is down...
i don't see one button on this thing anywhere.
help needed

Hi Jim,
The 1310 bridge/injector do not have a mode button for configuration reset. However, you can reset the configuration if you use the console port on the injector:
1) Connect console port and power-cycle unit
2) When IOS starts loading, hit ESC key twice to get to the boot-loader prompt
3) At the boot-loader prompt show a directory of the flash filesystem (dir flash:)
4) Delete or rename the files "config.txt" and "env_vars", then boot the system ("delete flash:/config.txt" "delete flash:/env_vars")
(The default user/pass should be Cisco/Cisco)
-Patrick Croak
Wireless TAC

Aironet 1300 series as wireless client ?

Hi there.
I would like to install a device on a yacht so that when the yacht enters a marina, it can connect to the marina wifi and then make that connection available to the yacht network. I am looking for a cisco device that will do similar to the Smartbridge Nexus (http://www.smartbridges.com/products/accesspoints.asp), which have done the job adequately in the past.
I was thinking of using a 1300 series outdoor unit, does anyone know if I can use it in the way I plan, or if there is an alternative.
Many thanks,
Neil

There are couple of options for you.
1. Cisco 350 series workgroup bridge - this will connect to the marina wi-fi and provide wired access to the yacht. If you connect a hub to the WGB's output, you can spread the connection among multiple laptops.
2. Also explore an option of using any Cisco AP as a repeater. A repeater will connect to the marina wi-fi wirelessly and extend the network to the yacht. But please note that the data rate may not be that good because of an extra hop in the middle.
For both these options to work, the marina wi-fi must be autonomous AP deployment based. If it is a lightweight-based wi-fi with a controller none of these options will work.
HTH

Cisco Aironet 1300 Series Power

Can the 1310ap receive it's power from a POE switch?

Hi Edward,
Sadly the 1310 cannot be powered by PoE ,but, the Power Injector can be up to 100 meters away from the unit.
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob

Multiple VLANs over 1300 series bridges

Hi
I am looking to connect a small external building to a main campus building by wireless bridge. The building i want to connect currently has two vlans, can the 1300 series bridges carry multiple vlans over the wireless bridge link? If so can anyone point me towards s document that explains it?
Many thanks
Simon

Hi Simon,
Yes they can, here is a link, i hope it helps you, look at the "Bridge configuration" title.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml
Regards,
Milton Tizoc.

1300 Series Access Point/Bridge Power Injector - Using power over ethernet

Can I use power over ethernet to supply the Injector with power?

Hi Mikael,
Sorry, this will not work. Have a look at these specs;
1300 Series Power
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
The power injector is available in two models:
Cisco Aironet Power Injector LR2 standard version (included with the access point/bridge)
48-VDC input power
Uses the 48-VDC power module (included with the access point/bridge)
Cisco Aironet Power Injector LR2T optional transportation version
12- to 40-VDC input power
Note The power injector and the power module must not be placed in an outdoor unprotected environment. The power module must not be placed in a building's environmental air space, such as above a suspended ceiling.
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_chapter09186a008079b93b.html#wp1051840
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_book09186a00804d3095.html
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob

1300 series antenna

Dear All,
I wanted to ask whether AIRANT-24120 or other high gain bridge antennas can be used to provide Access point capabilities with 1300 series AP.
My scenario is that, that i wanted to give roaming services to my WIFI clients in approx 15km range. But the data sheets suggests that these antennas can be used for point to point or point to mulipoint bridge scenarios not with the Access point role. In short i was hoping to use AIRANT-24120 with one 1300 series AP to provide AP capabilities with long range.
Please guide me in this regard or suggest me any other solution.

Hi Tahirali,
In bridge environment this antenna (AIR-ANT24120 can operate up to 15.8 miles (approx ) at 2Mbps data rates. ie when two bridge are talking.
But what look like you are looking 15 km coverage for client. And its not possible because in AP enviroment we have client (wireless laptop and phone ) talking to AP.
Even though these bridge are powerful and can transmit up to 15 km using this antenna but we donot need to forget that these client operate with very lower power radio in it. ie less than 1 milli watt voltage.
So even though 1310 signal will reach client client will not able to send it signal so far ie 15 km or so . And hence its not possible until you have local tower set to all over this 15 km radius so to allow client to send back signal to server .
Its very similar as mobile phone as small cell that is phone connect to server through local tower.
thanks
kunal

1300 series AP antennas

Dear All,
I wanted to ask whether AIRANT-24120 or other high gain bridge antennas can be used to provide Access point capabilities with 1300 series AP.
My scenario is that, that i wanted to give roaming services to my WIFI clients in approx 15km range. But the data sheets suggests that these antennas can be used for point to point or point to mulipoint bridge scenarios not with the Access point role. In short i was hoping to use AIRANT-24120 with one 1300 series AP to provide AP capabilities with long range.
Please guide me in this regard or suggest me any other solution.

Thanks for clearing the concept, but one more question :)...so what can be the solution to connect a distant client several kilometeres away from my root ( any cisco product u can suggest ?) What i have in my mind is that i connect, two 1300s through omnis and use a bridge mode. and since bridge mode supports clients association this could solve my problem? correct me if i am wrong..

1300 Series at 100 mW

Kindly advise what part number of 1300 Series bridge should I order to have maximum 100 mW power output in .11b mode. I intend to use external antennas.

Hi Alexei,
All power levels are subject to country standards. The "E" model access points are set to European standards, which I believe restrict 802.11b to 17dB (50mW).
I apologize for assuming you were in the Americas. Assuming now that you're in Europe, you won't be able to order an "A" access point. Or at least, you can order it, but you can't legally use it at full power :)

1300 series as Bridge and AP both

Any idea if 1300 series is bridging with another 1300 with integrated antennas on both the end, how would be the performance of it if used for AP mode as well as it works both ways.

Configuring access points and bridges to treat a workgroup bridge as a client device allows more workgroup bridges to associate to the same access point, or to associate using an SSID that is not an infrastructure SSID. The performance cost of reliable multicast deliveryduplication of each multicast packet sent to each workgroup bridge limits the number of infrastructure devices, including workgroup bridges, that can associate to an access point or bridge. To increase beyond 20 the number of workgroup bridges that can associate to the access point, the access point must reduce the delivery reliability of multicast packets to workgroup bridges. With reduced reliability, the access point cannot confirm whether multicast packets reach the intended workgroup bridge, so workgroup bridges at the edge of the access point's coverage area might lose IP connectivity.
When you treat workgroup bridges as client devices, you increase performance but reduce reliability. You use the no infrastructure client configuration interface command to configure access points and bridges to treat workgroup bridges as simple client devices. This is the default setting.

1300 series psc, I wish to uninstall

Similar Messages

Maybe you are looking for