1300 suddenly stops printing multiple copies

My Laserjet 1300 suddenly stopped printing multiple copies. I am using the driver supplied with win7 and it has been working for the last year. I have tried installing PCL6 driver instead of PCL5 and I can print multiple copies for one job only and then the computer does not recognize the printer. Has HP sent an update that has changed the way win7 works with the printer? Any one with a solution or idea?  Thanks, John

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

     HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop until you shut off.  It resumes printing when you turn the 1022nw  back on
    Have renistalled Driver
    It worked fine with Vista and XP

    Hello @Astronav,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the issue of  multiple pages continuously printing from your Windows 7 computer to your HP LaserJet 1022nw Printer. However, in order for me to provide you with accurate support I do need to know how your printer is connected to your Windows 7 computer.
    Normally the continuous printing issues are caused by your router. When you send the print command to your printer from your computer than the print command goes from your computer to your router and finally to the printer. If there is a conflict with your router it may constantly send the signal to the printer to 'print' a job. Or, if the printed text is garbled information and weird symbols that your printer is printing it could be commands from the router to your computer that are improperly being sent to your printer and resulting in a page of weird symbols printing.
    Therefore, it is very important for me to know how your printer is connected to your computer as that will guide us in the what direction we need to be troubleshooting.
    Once I find out how your printer is connected to your computer I will be able to provide you with step-by-step instructions on how to resolve this continuous print issue. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Laserjet 5000 with windows 7 driver cannot print multiple copies unless disabling mopier

    Customer has Laserjet 5000 that they have been using for approx 5 years. It is connected to one computer with the standard parallel cable and the driver is using lpt1. It is used mainly to print word documents and a multi page publisher document. The computer used to be a windows xp computer and all  worked  well with the PCL6 driver and that is the only driver that was used
     They just bought a new Windows 7 32 bit computer and now it has lost some of the functionality.
    The first driver that was loaded was the driver that Windows 7 used after you use the windows update button that you get during the add printer wizard. I think it was the pcl 5 driver as that is the driver that the computer will install if you remove the printer and then restart the computer. Using this driver, when you choose to print more than one page or multiple copies, it will just print the first page or copy and there will not be any errors displayed.
    I have since downloaded the PCL6 driver, PS driver and PCL5 driver from HP's website and tried all of them.
    The PS driver will print more than one page, but when it gets to about the 4th page the printer prints out an error page. The error is PCL XL error, Subsystem: Kernel, Error: Unsupported protocol, Operator 0x0, Position:0
    The PCl 6 driver will print the same error page and not print any print jobs, even if it is just a single page, single copy job.
    The pcl 5 driver prints one page and then stops printing, no errors.
    When I disable the mopier under device settings, the pcl5 driver will print everything just fine. Only problem is, it will not collate. The collate checkbox is available and checked when we try the multiple page multiple copy publisher document, but it just prints out as if we do not have collate checked. If we could get collation to work, than we are good to go.
    I have not tried the PS driver with the mopier disabled.
    The PCL6 driver stills returns the pcl xl error with the mopier disabled.
    The printer does not have any extra memory, just the 4 mb standard that came with the printer. I am wondering if this is a memory issue triggered by Windows 7and I just need to get more memory for the printer. (Computer has 4 gb of memory)
    Anybody else have a similar issue and got theirs fixed?
    Thanks in advance.

    Hi jnickelsen,
    I understand the printer won't print multiple copies.
    Thank you for your reply.
    I will be happy to help you with this.
    This printer doesn't have the Mopier settings.
    What drivers are you using?
    Did you download the drivers or are you using the Windows preinstalled drivers?
    If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
    I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
    Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Problem with 4250dtn printing multiple copies Windows 7 64 bit

    We can't print multiple copies from within some, but not all, applications to a Laserjet 4250dtn from Windows 7 64-bit workstaitons.  Windows 7 32-bit ones work fine.  The printer is served from a Server 2003 printer queue, but even when we print direclty to the port we only get one copy. Setting copy count from the printer dialog works fine, but we need to have the applications invoke multiple copies. We are using the UPD 64-bit driver;  could not find a legacy driver for this printer for Win 7 64 bit. I've tried various tricks found elsewhere on this forum, including turning off mopier mode, printing directly to the printer, disabling advanced features, etc. to no avail. Help, anyone! Thanks. Jerry TurnbowUSBO

    Thanks very much for the feedback. I was getting worried!
    The command window opens when I double-click on the Developer Day VM and I get a few lines that scroll off the window about loading Linux .... These lines never come back and I can't scroll in the command window.
    As soon as the above messages come into the command window the whole process stops. The window stays open but I get no response from it. I get no login prompt or anything.
    Do you think it could be a VirtualBox setup issue? I downloaded and installed the product along with the extension pack with no apparent problems and when I start VirtualBox I see the Developer Day VM listed in the left panel. All I do at that point is double-click it like the download web site said but I don't get the same results, i.e. no chance to login. It seems all I can do at that point is close the window by clicking the 'X' and it asks me 3 things about what to do with the VM and I usually say to shut it down. None of the other options look any better either.
    Any other suggestions are most welcome!!
    Thanks again!
    -gary

  • HP printer will not print multiple copies of docs using new HP Pavilion HPE Series PC.

    I purchased a new HP desktop computer with Windows 7.  I connected my existing HP laser jet printer to the new PC and the drivers installed successfully.  When I want to print multiple copies of a document the printer only prints one copy and stops.  I can print multiple copies on my Kodak color printer from the new PC.  I did not have this problem with my old PC.  The issue only exists between the new PC and the existing HP laserjet printer.  I have checked all printer preferences and settings to no avail.  Any suggestions for further trouble-shooting?    

    printer model? is your win 7, 32 bit or 64 bit?
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • How do I print multiple copies of a page in a PDF File?

    How do I print multiple copies of a page in a PDF File?  For some reason I tell it to print, for example, 3 or 4 copies of a certain page and it will only print one copy!!!

    OS X 10.9.5Adobe Reader 11.0.10
    I increase the number of copies to 3, 4, or 5 (etc.) but it would still only print one copy of the designated page/pages.
          From: pwillener <[email protected]>
    To: Caren Harris <[email protected]>
    Sent: Friday, March 6, 2015 9:17 PM
    Subject:  How do I print multiple copies of a page in a PDF File?
    How do I print multiple copies of a page in a PDF File?
    created by pwillener in Adobe Reader - View the full discussionOperating system?  Reader version? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7262032#7262032 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7262032#7262032 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I am unable to print multiple copies on 1 page

    I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

    Hi,
    In order to print multiple documents on one page, you may follow the steps mentioned below:-
    Press Command+p- Select multiple pages or booklet
    If you are not getting these options, please send us a screenshot to better understand the issue.
    Regards,
    Nakul

  • Printing multiple copies of 3 page BOL in Duplex mode-

    Hi Gurus!
    I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
    At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then  again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
    Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
    Please suggest.

    Hi!
    Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
    My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
    Please suggest as to what to do next to make it print in proper sets.
    Thanks and Regards
    Aarav

  • Print Multiple copies of report, and resetting Page number for each copy.

    Dear frnds!
    i am using developer 6i reports i have a problem.
    i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
    1 - for user copy
    2- gate copy
    3- accounts office
    4- office copy
    any body please tell me the solution "i am using oracle 9i and developer 6i"
    Thanx
    Ibrar

    Hi,
    I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
    <?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
    HEADER
    PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
    PSN Detail: <?$G1/PickSlipNumber_ID260?>
    Page 1 of 3
    <?start:body?>
    BODY
    <?$G1/LineNumber_ID6?>
    <?end body?>
    FOOTER
    <?end for-each?>
    <?end for-each-group?>
    XML:
    <R5542520>
    <Pick_Slips_Detail_Lines_S24>
    <Header_Custom_Section_S24>
    <Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
    <PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

  • Printing Multiple Copies of Same Image on Multiple Pages

    I have Photoshop Elements 11 on a Windows 8 platform.  I can NOT get it to print multiple copies of the same file on multiple pages.  I need one file printed on one page multiple times.  I have tried the CTRL-ALT-SHIFT and nothing changes.  It still just prints one and is done.
    I use this for label printing, so I need it to print more than one copy at a time.  It also is not saving the settings, so everytime I hit print, I have to readjust the print requirements.  This just is not going to work when you need to print a few hundred copies at a time.

    You can create your own picture package, if none of the options in the PSE print window>Type of Print work for you. Just make a blank file, copy/paste your image and alt drag it to make multiple copies. You can use the move tool to position things as you want them.
    Generally speaking, though, for something like label printing, it's simplest to use PSE to create the image, then use your word processing/desktop publishing program to print the actual labels.

  • How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

    How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

    Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy &amp; paste.

  • How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    no - you simply have to select the option to print mucliples of a photo on a page
    select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
    LN

  • Suddenly there are multiple copies of the same ibook on my bookshelf. How do I get rid of the extra copies?

    I have purchased several ibooks from the bookstore over the last several months. Suddenly there are multiple copies of several titles. Not coincidentally I am have trouble downloading newly purchased titles. I am receiving a message that there is insufficient space when there is, in fact, 6GB+ available. How to proceed?

    Quit iBooks completely and reboot the iPad.
    From your home screen -Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the iBooks app icon. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Go back to iBooks and see if the duplicates have disappeared.

  • How to print multiple copies on one page ?

    How to print multiple copies of one document on one page ?
    in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
    how do I make the same operation in Indesign.
    thanks

    Hi, Peter S.
    >I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
    * It's just an alternative to copy/paste and step/repeat.
    * For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
    Regards,
    Peter Gold
    KnowHow ProServices

  • How to print multiple copies of same image (with specific fixed dimensions) on single page

    I am using Photoshop Elements 10 on Win 7 PC.  I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images.  When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected.  Neither is acceptable.  How can I repeat the same image on a single piece of paper without having the system re-size the image?  I know that I can manually create a new PSE file and manually insert the images into this file.  This is what I have been doing as a work-around.   But I would hope there is a better/faster way.
    Thank-you!

    A variation of hatstead's method where the pictures are precisely aligned:
    1. Add the picture to the blank file as hatstead described. Use the Move tool to position the picture in the upper left corner.
    2. Duplicate the layer. Use the arrow keys (NOT the mouse) to move the new layer to the right.
    3. Repeat step 2 until the row is filled:
    4. Merge Down the 3 layers into one. Alternatively, link the 3 layers and do a Merge Linked as in this example. The end result is the pictures in the row are on one layer:
    5. Duplicate the layer and use the arrow keys to move this down to the 2nd row.
    6. Repeat step 5 to create additional rows.
    7. Finally, to center the whole thing on the sheet, link all the row layers and position with the arrow keys.
    Note that you can also custom-make your own Picture Package. Instructions for this should be somewhere in Help.

Maybe you are looking for