1310 with integrated antenna for 100M client conneciton

I would like to use as a AP to connect from my laptop which 100M away. Is it possible to use aironet 1310 with integrated antenna for this approach? Any experience?

Yes, You can use the 1310 device and configure it as a AP and connect it to your Wireless laptop. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge is a flexible platform with the capability of access point, bridge, and workgroup bridge functionality.

Similar Messages

Aironet 1310 with integrated antenna outdoor placement

Hi Guys.
One of our offices may be moving in the future to a building facing ours. Im thinking of buying 2 1310 outdoor AP/bridge devices intergrated antennas along with the roof mount kits. The buildings are in perfect line of site and our approx 33 meters apart.
The issue is that both buildings are metal clad. Will this have any bearing to the radio connection between the devices ?

Hi Jason,
You are most welcome my friend! Set the Non-Root with this config ***Non-Root Bridge with Wireless clients***;
Q. What devices can associate with a bridge?
A. Root Bridge:
Accepts associations and communications with non-root bridge devices and clients.
Does not communicate with other root bridge devices.
Communicates with multiple non-root bridge devices.
Non-Root Bridge:
Can associate and communicate with root devices or clients.
Does not communicate with other non-root devices, unless the other non-root devices communicates with the root bridge.
Note: Both the root bridge and the non-root bridge will service clients only if the role in the radio network Root Bridge with Wireless Clients or ***Non-Root Bridge with Wireless clients*** is supported by the bridge and is enabled.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_q_and_a_item09186a008015502c.shtml#q10
Nice Step by Step;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml#new1
Hope this helps!
Rob

Qosmio F60-L10 - How to configure tv tuner with integrated antenna?

good evening,
i have a notebook toshiba qosmio f60 ,i had read your answer about tv tuner.
my question is : how to configure tv tuner with integrated antenna? thanks

Hi 3171954,
I think Paolo30 is right. Qosmio F60 is equipped with internal DVB-T but in some cases you need an external antenna to pick up the low signal. In most cases only in large citys you dont need an external antenna. If you live on the fringe of the city, normally a cable is needed.
Anyway, do you mean an external antenna or external DVB-T receiver (USB stick)?
Normally Windows media center should recognize the internal DVB-T tuner. Is it listed in device manager? Did you update the driver?

How to Force mac Thunderbolt External Display with Integrated GPU for Macbook Pro 2012?

I have been getting GPU Panic whenever I use external Thunderbolt Display.
Not sure whether this is software after(Mavericks) or hardware, if anybody could shed some light I would appreciate it.
The Current Discrete GPU will only work for few seconds 10 sec max before it became blank and require you to force shutdown. This also happened even without external display Blank and GPU Panic upon restart. So I suspected either the discrete GPU failure or software in Mavericks.
But at the moment I'm looking for workaround so I can use the intel intergrated GPU to use my Mac Thunderbolt External Display.
Thank you in advance for any input.
Anonymous UUID:       08E3F48E-64B8-B380-1B7A-A676656BE0A6
Fri Nov 1 21:55:27 2013
panic(cpu 0 caller 0xffffff7f8876bfac): "GPU Panic: [<None>] 4 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x102c00000 0xffffff80fe1b8000 0x0e7150a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80fd8b3540 : 0xffffff8006422f69
0xffffff80fd8b35c0 : 0xffffff7f8876bfac
0xffffff80fd8b3690 : 0xffffff7f87020cf8
0xffffff80fd8b3750 : 0xffffff7f870ede26
0xffffff80fd8b3790 : 0xffffff7f870ede84
0xffffff80fd8b3800 : 0xffffff7f87318f31
0xffffff80fd8b3870 : 0xffffff7f87111011
0xffffff80fd8b3890 : 0xffffff7f87027841
0xffffff80fd8b3940 : 0xffffff7f87025362
0xffffff80fd8b3b40 : 0xffffff7f870263cd
0xffffff80fd8b3c20 : 0xffffff7f86fd365a
0xffffff80fd8b3db0 : 0xffffff7f86fd23e4
0xffffff80fd8b3dd0 : 0xffffff7f8873e812
0xffffff80fd8b3eb0 : 0xffffff7f8873e6ee
0xffffff80fd8b3f00 : 0xffffff7f8873d55e
0xffffff80fd8b3f20 : 0xffffff800644a15a
0xffffff80fd8b3fb0 : 0xffffff80064d6aa7
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8875e000->0xffffff7f88770fff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f88756000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8772a000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f88759000
         com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f86fd0000->0xffffff7f8723afff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f86fc0000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
         com.apple.nvidia.driver.NVDAGK100Hal(8.1.8)[3CF8C2FA-83E6-39E3-A5B7-C7CC839B8C7 5]@0xffffff7f87245000->0xffffff7f873f4fff
            dependency: com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f86fd0000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
         com.apple.driver.AGPM(100.14.11)[087FCB18-55FA-300E-9D22-DDE636C74BE1]@0xffffff 7f8873c000->0xffffff7f8874dfff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
            dependency: com.apple.driver.IOPlatformPluginFamily(5.5.1d27)[C86803C1-60BC-386D-9C54-2E6D7 4CCEA74]@0xffffff7f87733000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f86fc0000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
            dependency: com.apple.AppleGraphicsDeviceControl(3.4.12)[C171C5AF-1BB6-385A-A4DB-3ED5626711 1E]@0xffffff7f8841c000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000006200000
Kernel text base: 0xffffff8006400000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 88932950458
last loaded kext at 12260883008: com.intego.Family-Protector.extension     1770 (addr 0xffffff7f8888a000, size 53248)
loaded kexts:
com.intego.Family-Protector.extension     1770
com.intego.virusbarrier.kext.realtime     775
com.intego.netbarrier.kext.network     653
com.intego.netbarrier.kext.process     653
com.intego.netbarrier.kext.monitor     653
com.rim.driver.BlackBerryVirtualPrivateNetwork     1.0.15
com.parallels.virtualsound     1.0 22731.929773
com.Cycling74.driver.Soundflower     1.6.6
com.veldom.driver.EM_Usb     1.0.48
com.cyberic.SmoothMouse     7
com.intego.Family-Protector.safe-boot     1770
com.rim.driver.BlackBerryUSBDriverInt     0.0.97
com.apple.filesystems.autofs     3.0
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.iokit.IOBluetoothSerialManager     4.2.0f6
com.apple.driver.AGPM     100.14.11
com.apple.driver.ApplePlatformEnabler     2.0.9d1
com.apple.driver.X86PlatformShim     1.0.0
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AudioAUUC     1.60
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.driver.AppleHDAHardwareConfigDriver     2.5.2fc2
com.apple.driver.AppleUpstreamUserClient     3.5.13
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AppleHDA     2.5.2fc2
com.apple.driver.AppleHWAccess     1
com.apple.iokit.IOBluetoothUSBDFU     4.2.0f6
com.apple.driver.AppleIntelHD4000Graphics     8.1.8
com.apple.driver.AppleMikeyDriver     2.5.2fc2
com.apple.GeForce     8.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
com.apple.driver.AppleLPC     1.7.0
com.apple.driver.AppleSMCLMU     2.0.4d1
com.apple.driver.AppleMuxControl     3.4.12
com.apple.driver.AppleBacklight     170.3.5
com.apple.driver.AppleMCCSControl     1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.2.0f6
com.apple.driver.AppleSMCPDRC     1.0.0
com.apple.driver.AppleIntelFramebufferCapri     8.1.8
com.apple.nvidia.NVDAStartup     8.1.8
com.apple.driver.AppleThunderboltIP     1.0.10
com.apple.driver.AppleUSBTCButtons     240.2
com.apple.driver.AppleUSBTCKeyEventDriver     240.2
com.apple.driver.AppleUSBTCKeyboard     240.2
com.apple.driver.AppleFileSystemDriver     3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     35
com.apple.driver.XsanFilter     404
com.apple.iokit.IOAHCIBlockStorage     2.4.0
com.apple.driver.AppleUSBHub     650.4.4
com.apple.driver.AppleSDXC     1.4.0
com.apple.iokit.AppleBCM5701Ethernet     3.6.9b9
com.apple.driver.AirPort.Brcm4331     700.20.22
com.apple.driver.AppleAHCIPort     2.9.5
com.apple.driver.AppleUSBEHCI     650.4.1
com.apple.driver.AppleUSBXHCI     650.4.3
com.apple.driver.AppleSmartBatteryManager     161.0.0
com.apple.driver.AppleRTC     2.0
com.apple.driver.AppleACPIButtons     2.0
com.apple.driver.AppleHPET     1.8
com.apple.driver.AppleSMBIOS     2.0
com.apple.driver.AppleACPIEC     2.0
com.apple.driver.AppleAPIC     1.7
com.apple.driver.AppleIntelCPUPowerManagementClient     216.0.0
com.apple.driver.AppleIntelCPUPowerManagement     216.0.0
com.apple.nke.applicationfirewall     153
com.apple.security.quarantine     3
com.apple.kext.triggers     1.0
com.apple.iokit.IOSerialFamily     10.0.7
com.apple.iokit.IOBluetoothFamily     4.2.0f6
com.apple.driver.DspFuncLib     2.5.2fc2
com.apple.vecLib.kext     1.0.0
com.apple.iokit.IOAudioFamily     1.9.4fc11
com.apple.kext.OSvKernDSPLib     1.14
com.apple.iokit.IOSurface     91
com.apple.iokit.IOAcceleratorFamily     98.7.1
com.apple.nvidia.driver.NVDAGK100Hal     8.1.8
com.apple.nvidia.driver.NVDAResman     8.1.8
com.apple.driver.IOPlatformPluginLegacy     1.0.0
com.apple.driver.X86PlatformPlugin     1.0.0
com.apple.driver.AppleGraphicsControl     3.4.12
com.apple.driver.AppleBacklightExpert     1.0.4
com.apple.driver.AppleSMBusController     1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.2.0f6
com.apple.driver.AppleSMBusPCI     1.0.12d1
com.apple.driver.IOPlatformPluginFamily     5.5.1d27
com.apple.iokit.IOAcceleratorFamily2     98.7.1
com.apple.AppleGraphicsDeviceControl     3.4.12
com.apple.driver.AppleSMC     3.1.6d1
com.apple.iokit.IONDRVSupport     2.3.6
com.apple.driver.AppleHDAController     2.5.2fc2
com.apple.iokit.IOGraphicsFamily     2.3.6
com.apple.iokit.IOHDAFamily     2.5.2fc2
com.apple.driver.AppleThunderboltEDMSink     1.2.1
com.apple.driver.AppleThunderboltDPOutAdapter     2.5.0
com.apple.driver.AppleUSBMultitouch     240.6
com.apple.iokit.IOUSBHIDDriver     650.4.4
com.apple.driver.AppleThunderboltDPInAdapter     2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily     2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter     1.4.0
com.apple.driver.AppleUSBMergeNub     650.4.0
com.apple.driver.AppleThunderboltNHI     1.9.2
com.apple.iokit.IOThunderboltFamily     2.8.5
com.apple.iokit.IOEthernetAVBController     1.0.3b3
com.apple.driver.mDNSOffloadUserClient     1.0.1b4
com.apple.iokit.IO80211Family     600.34
com.apple.iokit.IONetworkingFamily     3.2
com.apple.iokit.IOUSBUserClient     650.4.4
com.apple.iokit.IOAHCIFamily     2.6.0
com.apple.driver.AppleEFINVRAM     2.0
com.apple.driver.AppleEFIRuntime     2.0
com.apple.iokit.IOHIDFamily     2.0.0
com.apple.iokit.IOSMBusFamily     1.1
com.apple.driver.AppleKeyStore     2
com.apple.driver.DiskImages     371.1
com.apple.iokit.IOReportFamily     21
com.apple.iokit.IOUSBMassStorageClass     3.6.0
com.apple.driver.AppleUSBComposite     650.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice     3.6.0
com.apple.iokit.IOStorageFamily     1.9
com.apple.iokit.IOSCSIArchitectureModelFamily     3.6.0
com.apple.iokit.IOUSBFamily     650.4.4
com.apple.driver.AppleFDEKeyStore     28.30
com.apple.security.sandbox     278.10
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.AppleACPIPlatform     2.0
com.apple.iokit.IOPCIFamily     2.8
com.apple.iokit.IOACPIFamily     1.4
com.apple.kec.pthread     1
com.apple.kec.corecrypto     1.0
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM512E, 500.28 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4

I have the same problem with an early 2013 macbook pro. gfxCardStatus ( http://gfx.io/ ) will allow you to force integrated and not do dynamic switching, however the external display still doesn't work.

IDOC with different hardware for both clients

Hi All,
I am creating a MATMAS IDOC and I have receiver client on different hardware.
I have performed distribute model view(BD64) at sender client and got at receiver client also.
Now when I generate partner profile at receiver client end. It is not working.
It gives message ' No messages have been defined for the selection conditions in the model'
Can anyone help me..
-Maharshi

Closing the Thread as found the solution.
"As both clients are on diffrent servers so we need to create logical systems on both clients(with same name) and need to perform SM59 also at both ends."

Create Operation with Integration Gateway for SOAP Webservices

Dear All,
Has anyone used the create operation for Soap Webservices for SMP 3.0 to invoke a POST into the system using OData and Integration Gateway.
Can you please help with the steps.
Thanks,
Best Regards,
Rakshit Doshi

I tried the same sometime back but faced some issues. Then i came to know about one known issue.
Reference
Rgrds,
JK

Basic 21.5" iMac With Integrated Graphics For FCE 4 Editing?

A PC friend of mine is toying with the idea of trying an iMac but is appalled by the high prices!
I suggested he could use the base model with the integrated graphics with FCE 4.
I realise that integrated graphics may pose a problem with certain high end apps such as Final Cut Studio 3, but for his basic editing with FCE 4 I would imagine it would be perfectly fine.
To my knowledge, the only thing that might be adversely affected are the FXPlug effects, which to him would be no great deal as his editing will be undemanding.
Any comments welcome, particularly from anyone who has used such a machine. Do the FXPLugs work, all or some or none?
Incidentally, there is no way he would fork out the extra cash for the next model up. It's the base model or no Mac at all.

Ian R. Brown wrote:
A PC friend of mine is toying with the idea of trying an iMac but is appalled by the high prices!
I suggested he could use the base model with the integrated graphics with FCE 4.
I realise that integrated graphics may pose a problem with certain high end apps such as Final Cut Studio 3, but for his basic editing with FCE 4 I would imagine it would be perfectly fine.
To my knowledge, the only thing that might be adversely affected are the FXPlug effects, which to him would be no great deal as his editing will be undemanding.
Any comments welcome, particularly from anyone who has used such a machine. Do the FXPLugs work, all or some or none?
Incidentally, there is no way he would fork out the extra cash for the next model up. It's the base model or no Mac at all.
Thanks Ian for asking because before I bought my 24" iMac with 256 dedicated graphics card, I was considering buying the Mac Mini which comes with the same integrated graphics card as the 21.5" base model that you mentioned.
But at that time, I didn't really got an answer because the Mac Mini was new. So, in order not to take risk, I bought the 24" iMac.
Now that you asked, I am thinking of getting the Mac Mini if everyone here confirms that the integrated graphics card in the Mac Mini is not an issue. Since your friend is on a tight budget, why not buy a Mac Mini especially if he/she already has a monitor ?
Besides, if he/she buys a Mac Mini, he/she can hook it up with a 27" monitor !
Cheers

Keyboard with integrated trackpad for Mac

Can anyone recommend a keyboard (preferably wireless) with an integrated trackpad? I have been using KeySonic ACK-540MAC-RF (UK) but the model has been discontinued.

The repeating function you want has been off by default since 10.7 was released 3 years ago. That terminal command should normally do the trick. Did you logout and login again?

CISCO aironet 1310 integrated antenna poor range

Hi
I am in Canada
I am trying to configure an AIRONET 1310 with INTEGRATED antenna
to work as an access point for clients on a campground
The range I get is awfull (50 feet and I loose the signal completly)
the aironet is outside and no tree are blocking it.
I configured it all by default exept :
-- in network interfaces : Radio0-802.11G Setting
-- I changed DATA RATES from Default to Best Range

Hi,
1300 Integrated antenna model comes with a Vertically polarized 13dBi gain antenna. The beam width is 36Â° E-plane by 38Â° H-plane.
Following is the range -
Americas
â¢ 865 feet (260 meters) at 54 Mbps
â¢ 3465 feet (1055 meters) at 11 Mbps
ETSI
â¢ 150 feet (45 meters) at 54 Mbps
â¢ 775 feet (235 meters) at 11 Mbps
TELEC
â¢ 485 feet (145 meters) at 54 Mbps
â¢ 1095 feet (330 meters) at 11 Mbps
So the range what you are getting is way too low.
Please check the orientation of the AP, the antenna is Vertically Polarized.
So the AP should be mounted vertically.
Second make a note at the beamwidth 36Â° E-plane by 38Â° H-plane. Make sure that all your clients are only in this coverage area. If its an open area and you want coverage for client overall the area probably I won't go with this AP being a sector antenna not providing coverage in all 360Â° H-Plane.
HTH
-> Sushil

Antenna for 3700 series

Hi all,
I have done a lot of research regarding the best antennas for the warehouse but would like to hear your views on what I have chosen.
We are deploying in the warehouse and the ceiling is 10m high. We will be installing the 3700e and am eyeing the low profile omnidirectional antenna AIR-ANT2535SDW-R.
Well, one is because I read this: Choice of antenna as recommended by Cisco for the warehouse is that when configuring coverage for aisles, try to use directional (Patch) antennas on the wall and shoot down the aisles; or use low-gain Omni-directional antennas on the ceiling (such as dipoles) or units with integrated antennas because high gain omni-directional antennas tend to have more nulls.
And also there was a thread where Scott mentioned that he almost always goes for the omnidirectional. The guy there was deploying in a warehouse that is 12 m high.
Yes, I know that survey is best option. and no, I do not have an antenna or a 3700 to test. So basically, am looking for ideal figures. If the AP is to be mounted 10 m high, will this antenna handle it or otherwise? If not, what antenna is best?
Oh yer, also saw this from CCNP guide...
Antennas should not be too high (20 feet = 6m or higher ), otherwise, the client signal is seen as weak even below the antenna, and there is no clear difference in the client signal when close or far from the AP.
How confusing! Please assist me.

Hey Scott,
Thank you for taking your time to reply.
1) What is the safe distance for the small profile omnis? Like up to 6 m up ?
2) Read an earlier comment where you mentioned that best to use patches if you have a height of about 50" due to the signal bouncing back. Does that comment refer to only ceiling mounted patches or also wall mounted ones? If it refers to ceiling mounted ones, then doesnt that mean that we should not prefer it in this case?
3) I am looking for a ceiling mounted option to cover from 12 m high...Due to cost, what would be your second option? The antenna you in the link is good but it basically radiates omni directional, meaning that the signal is also radiated above the ceiling, where I do not need it...
4) Do you think the 2524 ones would be able to radiate from that high up?

Looking for a client appointment app

I'm looking for an application for a friend who is a personal trainer. And if such an application doesn't exist, I'm considering writing one (I'm a software engineer)
The application would maintain a database of clients, and a schedule of appointments with them.
For each client, the following data needs to be maintained: contact information, current statistics (weight, body fat percentage, strength) as well as a history of statistics. Clients pay for a package of sessions in advance, and the app would keep track of how many prepaid sessions remain, updating that number with each scheduled appointment and each payment. Every client has recurring appointments, several per week, but rescheduling is common, and needs to be easy. And the app should be able to print out a year report for taxes.
I was thinking that it should interface with Address Book for contact information, and Calendar for appointments.
The main app should run on Snow Leopard, but mobile access through an iOS 4 sister app would be great. (Although if it works with Address Book and Calendar, their synchronization through MobileMe might be sufficient)
Is there any such thing? There must be other trainers, and other professionals with similar needs.
-Ron.

Hi Ron,
was there a template for bento that met all of the requirements that you detailed? My wife is a personal trainer and we've been looking for similar functionality in an app. Currently she's using the calendar app and contact book, but as you say, rescheduling is frequent and tracking remaining sessions would be very helpful. Let me know,
Paul

What are the possible approches for hosting a product(custom SP application) for multiple clients on a single SharePoint farm?

We have a product which is a custom application based on SharePoint Foundation 2010. Right now, for each of our client we create a dedicated server and host the application in the standalone deployment. Now, the requirement is to host multiple clients in a
farm deployment.
Challenges are: 1. The product has same name for the wsp that is deployed on different client servers as of now. How to distinguish for different clients on same farm
Currently the product specific css and jquery is in 14 hive. These files will be of difefrent versions for different client. How to segregate that?
How many web applications is recommend to be created in a single SPF 2010 farm? What are the challenges?
There are a couple of DBs created in SQL for the application. What is the best way to separate those for the client?
Essentially its the same product but with different versions for each client that we want to deploy in a single farm. What is the best practice to tackle this?

For the most part, these are not SharePoint questions per se, but product-specific questions you'd better ask the vendor about. To get in some more detail:
1. It totally depends on the scope of the solution. If its global, then you're out of luck and any changes you make affect all instances that use it. Better ask the vendor about it.
2. Not that many, let's say < 10, assuming you're web applications have separate application pools. Check out http://technet.microsoft.com/en-us/library/cc262787(v=office.14).aspx#WebApplication for
more info.
3. This is very application specific and really should be answered by the vendor. Not related to SharePoint at all.
4. Again, really depends on the product so better ask the vendor.
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Wireless keyboard with integrated trackball

I'm looking for a wireless keyboard with integrated trackball (for the mouse function) to be used with a mac mini (leopard).
Any suggestion?
The apple wireless keyboard looks very nice, but would require a separate mouse and mousepad. That would not work very well with the intended setup (mac mini connected to the TV and keyboard/trackball used from the couch).
Paolo

This trackball looks pretty good according to its reviews and specs:
http://www.amazon.com/Kensington-Wireless-Optical-Trackball-64329/dp/B0000YDGSO

Profile for Production Client in production server.

Dear Tech Masters,
I have installed SAP ECC 6.0 (Production server). Now I want to create client ( First client after installation), which would be the production client. I am not sure about the profile for client copy from 000. After a lot googling ...I am confuse whether SAP_ALL or SAP_CUST which one I use for client copy from 000 for production client.
Please help me asap.
Edited by: RABI PAL on Jan 2, 2009 7:44 PM

go with SAP_ALL
you are using 000 client and ur going to create new client XXX for XXX client you try to use SAP_ALL then you can you DDIC with full authorizations for XXX Client.

Basis: No service for system , client in Integration Directory??

Hi All,
IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client in Integration Directory. Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
Because I have checked
1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
4) Did SLDCHECK from PI QA, works fine, no problems here
Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
Thank You,
Indrasena Janga

*I have trobleshooted a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
Thanks,
Varada Reddy

1310 with integrated antenna for 100M client conneciton

Similar Messages

Maybe you are looking for