1394 adapter from analog VHS-C to Premiere

I've got a job to copy video from some old VHS-C tapes to DVD.
I hope that I can use the 1394 ports (FireWire) on my motherboard or USB 3 for receive analog signal from the camcorder.
Which adapter should I buy to be sure that it can be used to Premiere?
VIA 6308 1394 controller supports 2 x 1394a ports
What adapter can I buy for this purpose

Alternately, use BMD Video Encoder for $149 - slightly cheaper than ADVC-110 (~ $220), and much smaller. Doesn't have S-Video, but then you may not need one if your VHS player doesn't have it.
For the record, none of the Grass Valley (or any analog-to-DV) converters encodes into MPEG2 VBR - which is the standard format for DVDs. There used to be inexpensive analog-to-MPEG2 USB encoders but I don't see them around any more.

Similar Messages

Importing from analog VHS-C camcorder to iMovie

I'm using a Panasonic PV-L552DH analog VHS-C camcorder (it's several years old) plugged into a Pinnacle Studio Movie Box. The sales person at the store said that iMovie on my iMac G5 would recognize the camera without loading any additional software (the Pinnacle device only has Windows software). Is there any way to import analog videos from my Panasonic PV-L552DH analog VHS-C camcorder?
I followed all of the instructions on the various help pages but it won't work with my iMac G5.
iMac G5 Mac OS X (10.4.8)

Joe, it looks like maybe you could kill 2 birds with one stone here. I had the same problem a year ago or so. I decided to buy a new Canon ZR200 camcorder that uses MiniDV tapes. But, the beauty here is that along with the camera being, well, a camera, it also can be used as a pass-through to convert old analog tapes from either an 8mm, VHS, or VHS-C camera. Just take the a/v cables out from the older camcorder, send them to the a/v port on the ZR200, and take the firewire cable from the ZR200 and send it to the firewire port on your mac. I do it all of the time, works flawlessly. Very simple. Costs about $250 for the camera, would probably cost you about $150-$200 for a converter only.
Powerbook G4 1Ghz Mac OS X (10.4.8)

Mon futur iMac Retina 5K est-il adapté pour le montage video sur Premiere Pro CC ?

Bonjour,
Je souhaite acquérir un iMac Retina 5K pour le montage vidéo et je veux vérifier qu'il sera adapté et performant pour Premiere Pro CC (2014)
Ci-dessous les spécifications. techniques de l'iMac. Faut il booster la version de base, par exemple avec un processeur i7, 16 Gb de RAM, Fusion Drive de 3 Tb ?
Mon budget n'est pas extensible à l'infini donc je dois faire des choix...
Merci.
Bernard
réalisateur documentaire www.bruxelles-sauvage.be
http://store.apple.com/be-fr/buy-mac/imac-retina?product=MF886FN/A&step=config

Merci pour les tuyaux !
Bernard Crutzen
Le 30 déc. 2014 à 11:22, torero13 a écrit :
Mon futur iMac Retina 5K est-il adapté pour le montage video sur Premiere Pro CC ?
created by torero13 in Creative Cloud Download & Install - View the full discussion
Bonjour,
Je suis photographe pro, et je réalise également des videos pour mes clients. En ce qui concerne la configuration de votre imac, je vous conseille de prendre deux options : Intel Core i7 quadricœur à 4 GHz et AMD Radeon R9 M295X avec 4 Go de mémoire GDDR5. Pour ce qui est de la RAM, il faut aussi booster la machine mais on en trouve sur d'autres sites pour beaucoup moins cher. Pour ma part je sauve mes images et mes videos sur des disques externes, et toujours en plusieurs exemplaires.
Bonne journée
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7052764#7052764 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7052764#7052764
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creative Cloud Download & Install by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

How to Set Polling Options of a DB adapter From EnterpriseManager/AdminCons

HI All,
We all know after Dragging a DB adapeter we can manually set the polling Options in J developer
However,
My query is how to Set Polling Options of a DB adapter From EnterpriseManager/AdminCons so that we dun hav to change our code and redeploy if any change is asked for.
My DB adapter is deployed to EM.(SOA Server).
Polling Options are like:
From the Polling Frequency list, select how frequently to poll for new records or events.
In the Database Rows per XML Document field, specify the number of rows per XML document when sending events to Oracle BPEL PM or Mediator. This is the batch setting between the database adapter and its consumer: Oracle BPEL PM or Mediator.
In the Database Rows per Transaction field, select Unlimited or enter a value to indicate the number of table rows to process during a single transaction.
When polling the database for events, you can order the returned rows by the selected column by using the Order By list. The best practice is to choose <No Ordering>, as message ordering regardless is not guaranteed without extra configuration.

Hi,
Inside your composite (in the EM), you can see there is a category table call 'Services and References'.
Under it, find the name of your JCA Adapter, where you've define the polling from the DB. Click on it and go to the property tab.
There you can find all the parameters you've set and more.
After you finish update it, click on Apply (this will automatically poll the data).
Arik

How to invoke a custom adapter from a BPEL process

Hi guys,
I've implemented a custom outbound adapter and deployed successfully on Weblogic V.10.3.4.
My current installation also consists of Oracle SOA Suite 11g / JDeveloper 11g (11.1.1.4.0)
In the Weblogic administrator's console,
*1.* I navigated to:
Summary of Deployments -> AdapterName -> Configuration -> Outbound Connection Pools
*2.* Selected: javax.resource.cci.ConnectionFactory and added new JNDI name for Outbound Connection Instance: "*eis/HelloWorld*"
My task is to invoke the custom adapter from a BPEL process.
I altered the customAdapter-config.xml so as to be able to use custom adapter wizard from JDeveloper's "Service Adapters" palette,
and fullfilled the custom adapter wizard's fields accordingly. The 3rd step of the wizard requires Connection Information.
I added: "*eis/HelloWorld*" in the "*Connection Factory Location*" field.
Deployed BPEL process successfully, but testing failed due to binding.jca-12510 error:
"The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/HelloWorld'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/HelloWorld. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server "I tried to apply (just for testing) "eis/FileAdapter" in the "Connection Factory Location" field of the custom adapter wizard,
and BPEL successfully invoked the adapter.
Any ideas ?
Thanks,
George

George, What deployment do you have this associated with?
- D.J.

Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?

Hi. My question is pretty much as the heading says :
Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?
As far as I can tell from googling and searching around, it does appear that it is safe to do so.
Specifically this page
http://support.apple.com/kb/HT2346
But I just wanted to double-check for confirmation that it is indeed safe to use the adapter from such an old mbook pro in a newer one.
The wattage is the same.
I wish to do so as I prefer the T-connector, and my older adapter has a much longer extension cord on it.
If not I may order another one from ebay.
Any idea how to check that an adapter from ebay is a true / legitimate / authentic apple adapter?
Thanks for your help.

Benway1 wrote:
Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?
Yes.
I recommend you buy one directly from Apple. There are many counterfeit power adapters on the market that could damage your MacBook Pro or potentially cause a fire.
Any idea how to check that an adapter from ebay is a true / legitimate / authentic apple adapter?
Nearly all of them are, even if the seller insists it is "genuine OEM". Legitimate adapters from eBay are likely to be used, not new. There is nothing wrong with used, as long as you know what you're getting.
Identifying a counterfeit is possible only through close examination.

Is there a way to import videos from old VHS tapes so that they can be later accessible to processing with imovie?

Is there any way to import videos from old VHS tapes so that thry can later be processed by imovie?

I recently got a new iPhone, and after restoring all my stuff from my old iPhone via the iTunes restore thing, I had to put all my music on manually, instead of it being restored.
iTunes content is not included with your iPhone's backup - no music, movies, tv shows, podcasts, audio and print books, tones, and apps. All iTunes content must be transferred back to your iPhone when restoring. If you sync music with Sync Music selected under the Music tab for your iPhone sync preferences with iTunes, music is transferred back to your iPhone from your iTunes library when syncing - syncing is followed after the iPhone is restored. If you manually manage music and videos with this selected under the Summary tab for your iPhone sync preferences with iTunes, you must manually drag all music from your iTunes library back to your iPhone. Manually manage music means manually all the way.

How can I view DVD's that I dubbed from old vhs tapes? I finalized them and can play on other DVD players but not my IMac. Is there a specific program?

I dubbed DVD's from old VHS tapes. I finalized them and can play tehm on differant DVD players, but on my IMac I can't play them. Ultimately I want to create home movies with pics, but how can I play the DVD's?

A DVD is a DVD, unless it's been authored in a non-standard way. When you insert it in your Mac, do you at least see the disk appear on the desktop? Does it have a VIDEO_TS folder in it, containing various files?
If you open DVD Player manually (from the Applications folder), does it see it and start playing? If not, try downloading VLC (free) and see if that works.

Need help with watching DVD-R from dubbed VHS

For some reason when I try to play a DVD-r that I recorded from a VHS tape, it will not play. I get the message that the disc is empty and yet I know it is not because it will play in the DVD player

Hi @Rod64,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I would be happy to assist if needed, as there are many models of HP Pavilion Notebooks. I would need the Model number.
How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to get signal from analog input and send it to analog output (real-time)

Hi everyone,
I am doing simple task in Visual C++ and I am using PCI-6221(37 pin).
Basically, I want to send same signal from 'analog input' to 'analog output'
at the same time (almost), to make it real-time application.
Can someone please provide me sample program.
I would appreciate if you could provide me with the good tutorial which explains
step by step everything about programing NI-DAQmx for C/C++.
Best Regards,
Khassan
Solved!
Go to Solution.

This is my code in C++, you can optimize it if it looks too messy. This code reads signal from analog input and outputs it through analog output.
To make this code work additional include directories and library directories must be added from NI.
I hope it helps someone.
#include <stdio.h>
#include <conio.h>
#include "NIDAQmx.h"
#include <math.h>
#define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
int main(int argc, char *argv[])
int32 error=0;
TaskHandle taskHandleRead=0,taskHandleWrite=0;
int32 read=0;
float64 dataRead[1000];
char errBuffRead[2048]={'\0'};
char errBuffWrite[2048]={'\0'};
bool32 done=0;
int32 written;
DAQmxErrChk (DAQmxCreateTask("",&taskHandleRead));
DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandleRead,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandleRead,"",100.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,0));
DAQmxErrChk (DAQmxCreateTask("",&taskHandleWrite));
DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandleWrite,"Dev1/ao0","",-10.0,10.0,DAQmx_Val_Volts,NULL));
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandleWrite,"ai/SampleClock",100.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,1000));
DAQmxErrChk (DAQmxStartTask(taskHandleRead));
DAQmxErrChk (DAQmxStartTask(taskHandleWrite));
while( !done && !_kbhit() )
DAQmxErrChk (DAQmxReadAnalogF64(taskHandleRead,1,10,DAQmx_Val_GroupByScanNumber,dataRead,1000,&read,NULL));
DAQmxErrChk (DAQmxWriteAnalogF64(taskHandleWrite,read,0,10.0,DAQmx_Val_GroupByChannel,dataRead,&written,NULL));
_getch();
Error:
if( DAQmxFailed(error) )
DAQmxGetExtendedErrorInfo(errBuffRead,2048);
DAQmxGetExtendedErrorInfo(errBuffWrite,2048);
if( taskHandleRead!=0 )
DAQmxStopTask(taskHandleRead);
DAQmxClearTask(taskHandleRead);
if( taskHandleWrite!=0 )
DAQmxStopTask(taskHandleWrite);
DAQmxClearTask(taskHandleWrite);
if( DAQmxFailed(error) ){
printf("DAQmx Error: %s\n",errBuffRead);
printf("DAQmx Error: %s\n",errBuffWrite);
printf("End of program, press Enter key to quit\n");
getchar();
return 0;

Call rfc sender adapter from non-sap systems

Hi,
is ist possible to connect to an rfc sender adapter from non-sap systems? I want to use the the RFC-Connector from http://rfcconnector.com, but in the client connect options there is no way to specify the program id.
Best regards,
Daniel

hi,
you don't need to use RFC type T (with program ID) - you can use whole connection string - just like in the example:
http://www.rfcconnector.com/documentation/examples/client/#functioncall
so just specify: host system number etc.
it should work like that - but let me know as I don't know this RFC connector
Regards,
Michal Krawczyk

How to initiate the call JDBC_Sender adapter from BPM?

Hello,
I have a periodicall proccess in BPM. After receiving some message in BPM I check some fileds of the message.If condition is true I need to initiate SQL request to external DB, to receive the message and send it after transformating to SAP.
How to initiate the call JDBC_Sender adapter from BPM? As I understand I need to use JDBC Sender adapter and once.
How to construct the correct BPM?
Thank You

the message comes into BPM. You check for some conditions and if true use a send step (Sync) that would query into DB table and as a reponse retrieve the related data. After the send sync step have the transformation step and another send step to SAP.
U would not configure sender jdbc but u wud need to config for recv jdbc. this wuld service the request and in response return the set of data from the table
Message was edited by:
Prabhu S

Webservice call to XI Interface through SOAP Adapter from a Web application

I am getting the following error, when I try to call the XI Interface using soap adapter from a web application.
ERROR :
SystemError:
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException
at some time i am getting the following error.
faultCode: HTTP
faultSubcode:
faultString: (500)Internal Server Error
faultActor:
faultNode:
faultDetail:
     {}:return code: 500
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>RCVR_DETERMINATION.NO_RECEIVER_CASE_BE</SAP:Code><SAP:Stack>No receiver could be determined</SAP:Stack></SAP:Error>
     HttpErrorCode:500
(500)Internal Server Error
can any of one help to resolve this.
Thanks in advance

Ganie
You are getting the exception at very first point of Pipeline Service i.e Receiver Determination, do compare the namespace, Sender Interface Name & Sender Service name with the payload you are sending from web-application, they must be exactly same.
The best way to get the test payload is suggested in above reply.

1394 adapter from analog VHS-C to Premiere

Similar Messages

Maybe you are looking for