1394 Net Adapter problem in XP

I have tried e-mailing this issue to MSI tech support, but unfortunately they did not have the answer I was looking for. Below is the main issue.
I am using Windows XP with this motherboard (model# MS-6704-030). Everything within Device Manager is working except for the 1394 Net Adapter. It has a yellow "!" next to it, and the description is: "This device cannot start. (Code 10)".
Everything else in XP comes up perfectly fine, even the 1394 controller (VIA OHCI compliant). I have successfully connected my Creative Labs Nomad 3 Jukebox through the firewire port and it works great. I have removed the 1394 net adapter and restarted the system several times. Each time XP recognizes the net adapter again but still has the same problem as above. I have no idea why this is happening.
I'm actually one of the few people that wants to use networking through the firewire port. If anyone has any clues, I would appreciate it! Thanks!

I just took a look at the thread you mentioned and it's interesting. I'll have to check those settings:
1. -Is ACPI enabled in the bios ? (probably)
-Is APIC enabled in the bios, and what MPS table ver ? (not sure what that is)
-Is PNP OS disabled in the bios ? (I'm pretty sure it's enabled, but why would this cause an issue?)
-Are all resources controlled by "auto" in the bios ? (probably)
I'll know more when I check tonight.

Similar Messages

K8T Neo FIS2R "1394 Net Adapter" in XP's Device Manager

I can't get my firewire port to work or recognize devices attached to it!
I just built a system with the K8T Neo FIS2R and an Athlon 64 3400+ running at stock speeds. It also has GeiL Golden Dragon (matched pair) PC-3200 DDR which is running 1 trcd increment higher than rated to ensure stability. I have a lot of devices installed and have reinstalled windows fresh twice now with the same problem.
In device manager, the "VIA OHCI Compliant IEEE 1394 Host Controller" seems to be fine, but in the "Network adapters" category, I see my D-Link Wireless NIC (fine) and "1394 Net Adapter" with a big yellow exclamation mark next to it.
This computer is for a music studio and I absolutely have to use the firewire port because DigiDesign's Digi002 needs to be attached to the computer and communicating properly in order for ProTools 6.1 (our main studio software) to install and run.
I also have the BIOS set to enable the on-board sound, but I also have a pro-audio card installed (the M-audio Delta 1010) and the computer doesn't even see the on-board sound device whether enabled or disabled, when the M-audio card is installed (but this isn't my main concern, getting the firewire working is).

Quote
Originally posted by Jocko
version 1.3 should be soon. v1.3B2 the beta is available it may help
Where? Nobody seems to be able to provide a valid location to acquire this mysterious "1.3 beta BIOS". Someone mentioned it is on the german MSI website. If it is, it's hidden, because I scoured it and found nothing.

W510 w/WinXP, device manager reports issue w/1394 Net Adapter (error code=10)

I recently reimaged a brand new W510 w/WinXP w/SP3 & installed Lenovo Toolbox utility. Which immediately identified an issue w/the 1394 Net Adapter in Device Manager. Looking at the Device Status (details) it states "The Device Cannot Start (code 10)" and suggests reloading the drivers. I've tried updating them using the UPDATE DRIVER button and searching the web but it states Windows cannot find a better match then the one I have. I've copied the driver from a 2nd WinXP machine (nic1394.sys). I've installed all of the Microsoft updates (for Critical Software and Hardware). Installed the Lenovo Driver Update utility & installed all available driver updates and flashed the BIOS and nothing has resolved it. I've run the full Lenovo toolbox diags and everything passes (including the 1394 adapters) I've also sent the PC into Lenovo for repair and they indicate everything tests fine as well..
Question, does anyone one know if this device is compatible w/WinXP ? Any other suggestions ?
Thanks,

hey acekc77,
the Lenovo Toolbox, is it version :6.0.5802.24 ? If it isn't, could yo go here and install the latest version >>
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73783
At the same do go here and ensure all driver/software is updated
>> http://www-307.ibm.com/pc/support/site.wss/MIGR-74582.html
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

1394 net adapter not working in device manager

I,m running the KT4 Ultra with fire wire on board with XP prof. Every thing is working fine except in device manager I have two listings for the 1394 net adapter.The first has the yellow explantion mark, Code ten."this device won't start. And the second is working but listed as 1394 net adapter #2. On the adapter it has two bhig ports and one small port.I quess the small port is for cam corders. Can I disablr the first 1394 in device manager and just keep the second one. I don't have and fire wire cables so I don't know if the adapter is working on all ports. Thanks Bruce
KT4 Ultra/Lan
2800 Barton/333
ATI 9700pro
Creative augll plat.
512 Kingston 2700 DDR

BIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag). Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF)

Firewire: no IEEE 1394 network adapter

I have a Lenovo 3000 N200 (vista) laptop with firewire port.
Whenever I plug in any device through this port, nothing happens. No drive, nothing.
I noticed that the OHCI driver is active, but there is no "IEEE Network" adapter. It used to be when I had XP at least. I cannot make it a way to install that thing in vista. I think that's the problem,
Can anyone suggest me a way of installing the 1394 Network adapter?
I want to connect my miniDV cam..
thanks
Message Edited by khrisztian on 04-11-2009 12:15 PM

http://wiki.archlinux.org/index.php/Xor … server_1.5

Mini display to hdmi adapter problem

Hi,
When I connected my mini display to hdmi adapter to hdmi, and hdmi cable to my ASUS PA238QR monitor, my early 2011 MBP 13" detects the monitor, but the monitor shows "hdmi no signal".
I tried unplugging everything, including the adapter and hdmi, but to no avail. I tried putting my computer to sleep, and waking it up, still, nothing seemed to be the cause of the problem.
I read through some old discussion on this issue, and nobody seems to have a solid solution besides purchasing another adapter.
I tried booting into win7 and still, the monitor shows "hdmi no signal".
I am 100% sure my monitor and hdmi works becuase when I used other laptops it's fine.
Thus, I'm suspecting it's the mini display to hdmi adapter's problem.
Is there a way I can make sure that my macbook pro is outputting the signal?
Any recommendation or advises are welcomed. Thanks for reading.

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

HT4241 HDMI adapter problem

i have an HDMI cable connected to my late 2011 macbook pro using a Rocketfish RF-AP305 mini display port adapter i plugged it all in to my 47 inch LG lcd tv but its not working i have searched all over the web but ihavnt found anything that helps so please help me

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

Hdmi adapter problem

I own Phillips 32pfl9604h TV. Recently I bought HDMI adapter. When I set up the iPad with HDMI to TV , TV is recognizing the iPad but the format is constantly switching between 2 different formats. I tried to connect it to a different model of TV and it does work normally. I've tried to change the format but I can't stop the changing of formats.
Is there any solutions for this?
Thank you in advance.
Jure

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

Hi, I'm having a macbook pro here and it spoiled after a year of using, i though it was the power adapter problem because when i try to charge my mac battery that is depleted it shows a very dim light and my mac won't start up

Hi, I'm a macbook pro user but recently my macbook just spoiled, i though was my power adapter problem because when i charge my mac battery that is depleted, it shows a very dim light and my mac just won't start up, even i bought a brand new 80 euro power adapter it still give out the same result.

when I switch it on, the little led light it up and u can hear the fun running and after 5 to 10 seconds switched off again / ive got all my recordings in there
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
in really disappointed with apple,
Serge... you are aware that you are responsible for backing up your importanta data correct ?

Sender Mail Adapter problem

Hi,
I am having problems to get my sender mail adapter running.
I configured it with the following parameters:
<i>Transport protocol: POP3
Message Protocol: XIALL
Adapter Engine: Integration Server
URL: pop://server
username + pw
poll intervall: 1 Min.</i>
The adapter is active and if I look into the adapter monitoring everything seems to be fine (green light).
But the adapter doesn't poll the messages from the mail account and I cannot see any activity in the message monitoring.
If I try the same configuration with Thunderbird everthing works fine. Also my receiving mail adapter works without any problems for the same account.
Do you have any idea what the problem could be or how I could find out what my mail adapter is doing?
Thanks,
Andreas

Hi all, hi Andreas,
have you solved you problem? Could you please describe how you did it.
I have the same situation and I haven't any ideas how can I manage it.
I checked all parameters and compared they with documentation. Everything seems to be ok.
I didn't see any messages in the message monitoring, but in the chanel monitoring I found follows:
exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
I tried the same configuration with email client and it worked. I tried change POP on IMAP with URL imap://server/folder. It didn't work also.
Could you please help me?
Thank you in advance,
Anna

SP13 : SOAP Adapter Problem

Hi All,
Recently we upgraded from SP9 to SP13. Every since we upgraded to SP13 we are experiencing weird problem with Outbound SOAP adapter.
We have exposed an outbound interface as a webservice, which is consumed by a .Net application. When the .Net application try's to call the webservice, we get soap exception "Server Error".
To make sure the call is reaching XI, we put in wrong credentials and we got authorization error. So the call is getting to XI.
Has anyone encountered this weird problem? Any thoughts or suggestions will be very much appreciated.
Thanks,
naveen

Hi,
There is a tool called SOAPScope from www.Mindreef.com
Its a webservices diagnostic tool. Use this to troubleshoot.you can get a evaluation for 4 days i guess.
Regards,
Sridhar

Interconnect JCA Adapter Problem

Im getting the following error when i use the jca adapter.
the DBAdapter.jar is in the library path in adapter.ini.
It seems strange as it throws bpel errors. do i need to install bpel?
<MSG_TEXT>There was a problem in starting the bridge.</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the following reason: ORABPEL-12529
ManagedConnectionFactory problem.
Could not instantiate ManagedConnectionFactory oracle.tip.adapter.db.DBManagedConnectionFactory due to: oracle.tip.adapter.db.DBManagedConnectionFactory
Please make sure the corresponding JCA Resource Adapter has been deployed.
Please correct the reported issue and redeploy the BPEL process.
at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:522)
at oracle.oai.agent.adapter.service.ServiceBridge.start(ServiceBridge.java:237)
at oracle.oai.agent.proxy.AgentProxy.go(AgentProxy.java:672)
at oracle.oai.agent.proxy.AgentProxy.start(AgentProxy.java:706)
at oracle.oai.agent.proxy.AgentProxy.><init>(AgentProxy.java:415)
at oracle.oai.agent.service.AgentService.run(AgentService.java:43)
at java.lang.Thread.run(Thread.java:534)
Caused by: ORABPEL-12529
ManagedConnectionFactory problem.
Could not instantiate ManagedConnectionFactory oracle.tip.adapter.db.DBManagedConnectionFactory due to: oracle.tip.adapter.db.DBManagedConnectionFactory
Please make sure the corresponding JCA Resource Adapter has been deployed.
at oracle.tip.adapter.fw.wsdl.WSDLUtils.setupManagedConnectionFactory(WSDLUtils.java:426)
at oracle.tip.adapter.fw.jca.AdapterLocator.findResourceAdapter(AdapterLocator.java:182)
at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:321)
... 6 more
Caused by: java.lang.ClassNotFoundException: oracle.tip.adapter.db.DBManagedConnectionFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at oracle.tip.adapter.fw.wsdl.WSDLUtils.setupManagedConnectionFactory(WSDLUtils.java:419)
... 8 more
]]></SUPPL_DETAIL>

Edit opmn.xml and add toplink.jar and DBAdapter.jar in the environment section.
Example:
<ias-component id="InterConnect" status="enabled">
<environment>
<variable id="CLASSPATH" value="$ORACLE_HOME/integration/interconnect/lib/DBAdapter.jar" append="true"/>
<variable id="CLASSPATH" value="$ORACLE_HOME/integration/interconnect/lib/toplink.jar" append="true"/>
</environment>

Display adapter problems after updating to Windows 10

Hello,
recently I updated to Windows 10 and I have an issue with my graphics card. In BIOS I have enabled the "Fixed Mode" that will allow me to have the graphics card always on. For some strange reason I cannot switch to my AMD Radeon HD 6700M gpu.Please help ! Thank you,
MIchael

Hi,
How about your network problem recently? if problem persists, you can follow the steps below to collect the scenario tracing and the WLAN logs.
1) Enable RAS Tracing on the client.
Over an Administrative command prompt.
C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
Over an Administrative command prompt.
C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
Over an Administrative command prompt.
C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
Over an Administrative command prompt.
C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Roger Lu
TechNet Community Support

Possible Realtek Ethernet Adapter Problem

When using Outlook Express (OE) over the last couple of months, I have noticed that when I bring the program up, it usually hangs with "Checking Mail" in the lower right hand corner. There is no activity showing on ZoneAlarm. It will never connect and I am never prompted for my password(I'm using OE to check hotmail and my cox.net mail). When I close OE, I'm left with a Window showing that it's still checking my hotmail account. I have a broadband cable Internet connection and I'm using a Linksys WRT54G Router. I have the router set up to act as a DHCP server, but because there is only one computer attached, I always have the same IP address.
I have found that if I bring up a command window and run ipconfig /release | ipconfig /renew, then OE loads up fine and I am immediately prompted for my password. Why does refreshing my IP address make it work? Is there some setting I should change to the Ethernet adapter? I did not have this problem until a couple of months ago and I can't narrow down any specific change that could have caused this. I have tried making a generic shortcut that will run ipconfig for me, but the best I can do is make it bring up a command window. Any advice?

Hey Jocko, good to hear from you. I finally read up on Folding at Home and decided to join the team. I'll have to keep my computer running more, but I don't think it's humanly possible to catch up to you! I see you've upgraded since last year. When you say Freedom AV, what are you referring to? I have the firewall on my WRT54G enabled and I have the Windows firewall enabled. Personally, I really think that the firewall at the router level should be sufficient, but everyone preaches the importance of having a software one as well. I definitely trusted ZoneAlarm more than I trust Windows, but I just got tired of the annoying timeouts with OE and I feel that 1.5 levels of protection is probably OK. What do you recommend as a good freeware firewall? By the way, I'm running NOD32 antivirus. As for fishing, my fishing buddy and I caught quite a few striped bass the Saturday before Christmas. It was a nice surprise. It's been pretty mild here for the last week and will be this week too. Highs in the 60s, farenheit that is of course. Have a good one.

Apple Mini-DVI to VGA Adapter Problems in Boot Camp / Windows

I currently run Windows XP SP2 on my MacBook and recently purchased the Mini-DVI to VGA adapter so I could hook up the MacBook to an external projector, monitor, or TV to display what's on my Windows screen on the external device. However, when I connect it to any external device, it just goes nuts and sporadically continues to make the hardware connect and hardware disconnect sounds and doesn't allow for external output of the screen. Any suggestions...? Thanks!
Marc

I think I solved this problem.
It was in issue for me. My second monitor would only display the Windows XP screen when it was loading, then it would black out. I couldn't even move my mouse arrow to the other side. Then I fixed it, here's how (running Windows XP SP3):
1. Start > Control Panel > Appearance and Themes
2. Display
3. Go to tab "settings"
4. Double click the blue image with the "2" inside it. This is the second monitor, adjacent to your first, or primary, monitor. The blue box may be a desaturated, greyish blue, meaning that the monitor is disabled. Click it and it a box will pop up asking if you want to enable the monitor. Click OK, and then like magic, your monitor is resurected in it's Windows Glory! From there, adjust the resolution, and it should work perfectly.
This isn't a Boot Camp compatability issue, it's just a problem with the lack of familiarity that users of OS X have with using XP.
Have a nice day!
Message was edited by: BlakeTron
Message was edited by: BlakeTron

1394 Net Adapter problem in XP

Similar Messages

Maybe you are looking for