13g 110dx

Hello All of You,
my Hp splitx2 13g-110dx (Best Buy ) win 8.1 operating system, the on screen keyboard does not appears automatically if i tap the screen. Has anybody a solution? I see that it is a common problem at these model.
Thank you and have a nice day.
VZs

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are facing difficulties with respect to the On-Screen Keyboard on your HP Unit.
We will surely assist you with this.
Please perform these steps to enable or disable On-Screen Keyboard on your HP Unit.
Step 01. Open PC settings under Control Panel, and click/tap on Ease of Access on the left side.
Step 02. Click/tap on Keyboard on the left side
Now, To Turn On the On-Screen Keyboard
A) Under On-Screen Keyboard on the right side, move the slider to the right to turn it ON.
B) The On-Screen Keyboard will now open
When finished, you can close PC settings if you like
To Turn Off the On-Screen Keyboard
A) Under On-Screen Keyboard on the right side, move the slider to the left to turn it OFF.
B) The On-Screen Keyboard will now close.
When finished, you can close PC settings if you like
NOTE: You could also just close the On-Screen Keyboard normally to turn it off here as well.
Hope this helps, for any further queries reply to the post and feel free to join us again
"I work for Hewlett-Packard"
* * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * *
* * * * * Please mark Accept As Solution if it solves your problem * * * * *
Regards,
K N R K

Similar Messages

Qosmio X300-13G - Cannot connect to WLan router using N draft

Hi
I've bought a Qosmio X300-13g (the only one availabe on Portugal :/ ) and i've tried to connect it to a wirelles N network, but I always receive an error:
windows couldn't connect 'cause the defenitions of the router are different from yours...
Well do you know why? I've tried with several routers and it's always the same..
Tks
Regards

Hi
Yes, i've tried with a SMC WBR14S-N2 and now I'm using a Sitecom 300N (wl-183 / wl-541), I only receive the error when I choose the N mode, when I try the Mixed (G-N) it works (the computer connect with the G mode)
Thanks

Qosmio X770-13G - Slow WLan internet connection

Dear all,
I just bought a Qosmio X770-13G with Windows 7.
WIFI data transfer is very slow, even when using a high speed AP (tried it on more than one location) and after disabling the anti-virus program.
Using the Config Free program shows 6Mbps second download speed but even downloading a 4 Mb PDF file takes several minutes.
Updating the BIOS software and the WLAN driver did not help.
Does anybody have the same experience?
Thanks in advance,
John

Yes, it does. And a new development yesterday evening shed new light on this problem: In addition to using a couple of known AP's I tried connecting to new AP's. Result: a data transfer speed as expected. So it seems I dont have to look into faulty hardware but into connection problems with certain AP's. I guess my original problem (suspicion of faulty hardware) is no longer an issue. Thanks for the reply.
John

Satellite C50D-A-13G affects Wi-Fi connection of other devices

Hi all, first post and a problem, like most I guess !!
Bought my first W8 Laptop Tosh Satellite C50D-A-13G
The wifi is driving me mad
When it does connect to my BT wifi,, all other devises in the house loss their wifi connection,,
Seams this new laptop , "hog's" the connection,
Only way to get out of it, is to pull the power from the BT box,, and wait 5 mins !!
I am guessing its a window 8 setting somewhere,, but regret I am somewhat of a IT dummy !!
Any help would be appreciated please,,
TIA
Tim

To be honest you are the first who reported something like that in this forum community.
From my point of few there must be a configuration problem with your WLan router.
I would recommend you to reset the settings and to reconfigure the router again.
Check also the router user manual and maybe support website of router manufacturer page for possible issues and workarounds.
Fact is that if DHCP is enabled in your router settings, the notebook and all other devices will get the IP address automatically from an IP address pool. This should not affect other devices since each device would get an separate IP address.
I would also recommend you to check in router settings the different WLan standards like 802.11 A, B, G or N and different frequency modes 2.4Ghz and 5Ghz and channels.

Re: Where can I find XP drivers for Satellite L40-13G PSL40E

Please help me, Where can i find drivers for L40-13G (PSL40E) for winXP?
In service http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU
i found only "Installation Instructions" with filter by WinXP.

It seems the XP drivers for L40 PSL40E are not released at this time.
It looks like you have to wait for till the XP drivers will be published
Anyway if you want, you could try some singles XP drivers from another L40 series many notebook series are equipped with the same devices and sometimes the same drivers for example WLan, LAN, sound driver could run on many different notebooks series
Greetings

Im trying to download a movie from itunes and it says i dont have enough memory. I can see that I have 13G in icloud but i dont know how to add the movie to that memory

Hi,
Im trying to download a movie from itunes to my ipad 2 but it says i dont have enough memory. I have 13G of space on icloud but cant figure out how to down load it to icloud. Can anyone advise please.

Hi back,
Icloud cannot be used to increase internal memory of ipads, otherwise nobody would buy more expensive 32, 64, 128 gigabyte versions. Hype with "movies in the cloud" is more of itunes store, keeping movies available for you in order to download on any device. That does not go against your storage in the cloud, though.
So if you go to your computer and you purchased movie ( not rented ) you can download and watch.
There is something else to pay attention to, your ipad (if I am not mistaken) is not capable to run HD movies, make sure you do buy Standard Definition, and they will take less space on ipad.

Satellite L40-13G: Bios not updating on Vista SP1

I have a Satellite L40 13G and the latest Bios update refuses to update.
I'm trying to update my BIOS because the laptop freezes randomly at times and I have "graphics" issues where games lag where there's any form of an explosion such as gunfire or a bomb.
There are no instructions, not in the exe and definitely not on screen. If I didn't know how to flash a BIOS I would definitely not know to choose the .bin BIOS file in the directory between all the DLL files.
Thank you
Yahweh.

The reason why your laptop keeps frozen is because there is a bug in the current graphic driver on your computer. If I am not wrong, you may have blue screen of death at the start up occasionally.
There is one way to solve the problem is to update the bios and I hope bios for L40 already updated the graphic bios (VBIOS) (I dont have L40 so I am not sure about this). However, be careful when you update the bios as it is quite dangerous and may kill your laptop.
If you have problems with the graphic/game, please follow the instruction given in: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=33432&tstart=15 (both first and second post). Try this one before you try to update your bios.
When you download the graphic driver from intel, you may receive the message that the driver is not suitable for your system. Don't worry. Just extract the driver package you download from Intel somewhere on the harddrive, Go to Device manager, browse to the extracted folder to update the driver manually. After it finishes, run the Intel Package again to complete the process
Good luck.
Message was edited by: anhchuong

Satellite L855-13G - cannot use the Webclaim service

Hello,
I bought a Toshiba Satellite L855-13G (PSKACE-04Y00CFR) in France last year but this computer is already causing me troubles!
The graphic card is making noise, one of the USB port is not working and now, without any software change, the computer shut down after displaying a blue screen with "KERNEL_DATA_INPAGE_ERROR".
This blue screen comes randomly (let us say about two or three times per day).
I would like to send this computer for reparation but now I discover something very weird: Toshiba has done all the possible to hide L855-13G!
First of all no result on the website:
https://www.google.co.uk/#q=%22l855+13g%22+site:toshiba.com
Second, the model is not listed in the support center:
https://www.toshiba.fr/innovation/generic/SUPPORT_PORTAL/
When I enter the serial number: no result. Also using the "Ou slectionnez votre produit" the model is not listed.
Third, and best, I cannot access the Warranty claim service for a Toshiba product for this computer: when I go on https://weblord.toshiba-tro.de/Webclaim/ and I fill the serial number, the computer is identified (alleluia), I have a green tick for Warranty status and "Your product is still in the warranty period."
But then, I cannot click on next and a mention "Product not available: Unfortunately your product is currently not available" is displayed instead.
So... apparently Toshiba is doing is best in order to forget about the Toshiba Satellite L855-13G but for the persons unlucky enough to have buy one what are the next steps?
I would like to be contacted by someone from Toshiba in order to get an answer, or a proposal to change my computer or at least to repair it!
Many thanks in advance,
Best regards.

> I would like to be contacted by someone from Toshiba in order to get an answer, or a proposal to change my computer or at least to repair it!
First of all I would like to provide you some inforamtions about this community.
This is an user to user community where you could meant Toshiba enthusiasts. You will not find any Toshiba people here
Now some details regarding the notebook fix:
In case your notebooks hardware started to malfunction, you could contact the Toshiba authorized service provider in your country in order to fix the hardware problems.
Here on this Toshiba ASP page you could find all ASPs available worldwide:
http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
Last but not least you should know that warranty covers only the hardware problems.
So in case the notebook does not work properly due to some software issues, the warranty would not cover the costs. Therefore I would recommend you to recover the notebook back to factory settings BEFORE you would contact the ASP.
I hope this info helps a little bit.

Satellite L855 - 13G - can not adjust the brightness after update to Win8

Hello
After update to windows 8 , and installed the latest AMD driver on Toshiba site, I can not adjust the screen brightness using the Fn F2 or F3.
In this thread : http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69752&tstart=45
He say he solved her problem but how ?
I have installed the Value Added Package, but no change
Thanks

Hi
Download the latest driver from Toshiba EU driver page.
Now uninstall the preinstalled driver in device manager (in device manager choose graphic card AMD/ATI and then choose uninstall driver).
After new reboot I recommend installing the driver from Toshiba page.

Satellite L40-13G - need more powerful battery

Hello! My current battery No is PA3591U-1BRS. I need a battery that can provide me more than 2 hours of working. Can you advice me something?
Thanks!

Hello
As you know Toshiba offers more powerful batteries for some notebook models. More powerful batteries are offered for business line notebooks only. Unfortunately for your Satellite L40 there are no other batteries as those you already have.
Satellite L40 seems to be low budget notebook and there are no much options offered for it. :(
Bye

Satellite C50D-A-13G switches off when unplugged

Hello
I have a new laptop but when I unplug it from the mains or switch the mains off it turns off immediately. The icon in the bottom right however says it is fully charged. Is there a way to fix this or is the battery broken?
Thanks

Hi. I have the exact same problem with the same model. Argos will not take it back and in the first few hours of owning it, installed a secondary copy of Office that I had and set up all sorts of other software.
I now have a very personalised computer that cannot seem to work on the battery.
Any advice would be greatly appreciated.

Why are the 8 apps installed on my iPod taking up 13G of space?! (The largest one is supposedly only 57mb)

So I have 8 apps installed on my iPod right now and for some reason after I deleted one very large app (I had 9 apps) the space used on my iPod actually increased??? The larges app that I've installed only takes up about 57mb of space so I'm very confused. Can anyone tell my why this might be happening and/or how I could fix this? Thank you very much!

Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files. Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Re: Satellite C50D-A-13G - boot from HDD only, can't install Win on new SSD

I recently bought a SSD to improve performance a little, I of course want to install Windows onto this.
The problem is that while the laptop recognises that the SSD is there, it only tries to boot from it, which it can't of course because it is blank.
Says 'Checking Media [fail]' and then 'No Bootable Devices Found.'
I've gone to the boot menu and tried booting from CD and USB, neither option works and the system again tries to boot from the blank SSD.
I've set both the DVD drive and the USB as first boot devices. Again neither of them work and you guessed it, the system tries to boot from the blank device.
What am I missing? There has to be a way to get the system to boot something other than the blank SSD.

Sorry for the late reply and thanks for the link, it solved my problem perfectly.
I was trying to reinstalling Windows 8 as it happened though, from the disc I'd burned after buying it for 24.99 at launch. I wanted Windows 8 from that because I hate the extra tat that Toshiba installed. That rubbish comes over to my desktop as well because of synch.

How to update BIOS on Satellite L40-13G

Hello everybody!!
I want to update my BIOS, but doesn't know how to do it. I looked instruction on a site:
Option 2: Update with CD-ROM
1. Extract the zip file containing the BIOS upgrade to a temporary folder.
2. In the temporary folder three sub folders will be generated. "docs", "Update - 3,5' Disk", "Update - CD-R or CD-RW"
3. How to make a bootable CD-ROM please read the *.pdf file in the "docs" folder.
4. Ensure the Notebook is connected to the mains.
5. Turn the Notebook off.
6. Place the CD-ROM containing the BIOS upgrade in the optical disk drive.
7. Turn the Notebook on with the F12 key.
8. The BIOS boot menu appears. Select CD/DVD or the CD-ROM symbol using the arrow keys. Press "Enter".
9. The Notebook will boot from the BIOS upgrade CD-ROM.
10. A boot menu appears. Select the point for update the BIOS by using the arrow keys. Press "Enter".
11. The BIOS update process starts. Do not switch off the notebook during update.
12. If the update process is finished follow the instruction on the screen.
Downloaded such update of bios: bios-20070904123621.zip
Page with update file: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp
Then I decompressed zip,.. and didn't see three directories, which written about in instruction (from above).
Help please, what I must to do. Or how to update my BIOS?
Thank you!

Listen Alexey!!
At this time you can find the BIOS 2.20-WIN for Satellite L40 on the Toshiba European driver page.
This is a *windows-based* version of the BIOS. Its *NOT* traditional BIOS version.
In such case you cannot update the BIOS using a diskette or CD. The BIOS update must be performed while the OS is running!!
However, the BIOS update is tricky and always RISKY!!! If you have no problems with your notebook, dont update anything!!!
The wrong BIOS or wrong BIOS update procedure can damage the board!!!!

Memory leak in Solaris 10?

Dear all,
I have installed and configured a Solution Manager 4.0 system SPS 15 on a Solaris 10 T2000 SPARC hardware with 8 core CPUs and 32 GB of RAM. The database is Oracle 10.2.0.2.   My Java virtual machine version is 1.4.2_17. When I start the system and go to st06, I see that I have 26 GB of RAM free
A few hours (sometimes even one hour) later and without any activity on the system whatsoever (it is brand new so nobody but myself is using it) I execute st06 and it looks like I only have 1 GB of memory left.
My saposcol is consistent with my kernel level (patch 133, which is the patch for the Support Stack 15). I had the same problem with support stack 13 as well ( so upgrading kernel didnt make any difference) and Java virtual machine 1.4.2_13
I have the same problem even when I start the system without starting the Java Stack (set parameter rdisp/j2ee_start to 0), so I do not believe that it has to do with the Java virtual machine or the Java Stack in general
Any ideas ?
Many thanks
Andreas

Hello,
Looks like Solution Manager is only using 4.4 GB from what I see in prstat. Shouldn't I worry at all then ?
   PID USERNAME SIZE   RSS STATE PRI NICE      TIME CPU PROCESS/NLWP
8879 root     3664K 3656K cpu0    59    0   0:00:00 0.1% prstat/1
8859 root     9040K 7000K sleep   59    0   0:00:00 0.0% sshd/1
4585 100      8032K 3584K sleep   59    0   0:09:10 0.0% saposcol/1
8858 root     5672K 4888K sleep   59    0   0:00:00 0.0% ssh/1
6873 100      1397M 1276M sleep   59    0   0:02:45 0.0% oracle/1
7162 100      2609M 698M sleep   59    0   0:12:57 0.0% jlaunch/200
7161 100       431M 266M sleep   59    0   0:03:52 0.0% jlaunch/116
1833 noaccess 294M   86M sleep   59    0   0:02:51 0.0% java/55
6869 100      1398M 1277M sleep   59    0   0:01:48 0.0% oracle/1
1874 noaccess 211M   89M sleep   59    0   0:02:50 0.0% java/55
   945 daemon   5104K 3848K sleep   59    0   0:00:01 0.0% kcfd/5
   882 noaccess 283M   87M sleep   59    0   0:02:49 0.0% java/55
   135 daemon   4632K 2728K sleep   59    0   0:00:00 0.0% kcfd/5
   290 root     2080K 128K sleep   59    0   0:00:00 0.0% smcboot/1
   251 root     9512K 4072K sleep   59    0   0:00:03 0.0% inetd/4
   264 root     2504K 848K sleep   59    0   0:00:00 0.0% ttymon/1
   250 root     2168K 680K sleep   59    0   0:00:00 0.0% sac/1
   289 root     2080K 120K sleep   59    0   0:00:00 0.0% smcboot/1
   210 root     2536K 920K sleep 100    -   0:00:09 0.0% xntpd/1
   238 daemon   2408K 456K sleep   60 -20   0:00:00 0.0% nfs4cbd/2
   201 root     2920K 1528K sleep   59    0   0:00:00 0.0% cron/1
   233 daemon   2800K 560K sleep   59    0   0:00:00 0.0% rpcbind/1
   132 root     6896K 1752K sleep   59    0   0:00:00 0.0% devfsadm/8
   123 root     2184K 104K sleep   59    0   0:00:00 0.0% drd/2
ZONEID    NPROC SWAP   RSS MEMORY      TIME CPU ZONE
     0       50 287M 260M   0.8%   0:04:46 0.1% global
     2      133   13G 4491M    14%   1:18:58 0.1% solman
     1       35 273M 186M   0.6%   0:04:24 0.0% content
Another prstat shows the dis+work process, not sure why it was not shown in the previous prstat
   PID USERNAME SIZE   RSS STATE PRI NICE      TIME CPU PROCESS/NLWP
7022 100      5293M 591M sleep   59    0   0:24:00 0.1% disp+work/1
4585 100      8032K 3584K sleep   59    0   0:09:15 0.0% saposcol/1
8978 root     3664K 3656K cpu24   59    0   0:00:00 0.0% prstat/1
7162 100      2609M 698M sleep   59    0   0:12:59 0.0% jlaunch/199
7161 100       431M 266M sleep   59    0   0:03:55 0.0% jlaunch/116
6873 100      1397M 1276M sleep   59    0   0:02:47 0.0% oracle/1
1833 noaccess 294M   86M sleep   59    0   0:02:52 0.0% java/55
6869 100      1398M 1277M sleep   59    0   0:01:49 0.0% oracle/1
1874 noaccess 211M   89M sleep   59    0   0:02:51 0.0% java/55
   882 noaccess 283M   87M sleep   59    0   0:02:50 0.0% java/55
   457 root     8136K 1832K sleep   59    0   0:00:03 0.0% sendmail/1
   363 root     5080K 272K sleep   59    0   0:00:00 0.0% automountd/2
   751 root       16M 5568K sleep   59    0   0:00:07 0.0% svc.startd/12
   364 root     5512K 3392K sleep   59    0   0:00:00 0.0% automountd/2
   397 root     3592K 560K sleep   59    0   0:00:00 0.0% rpc.metad/1
   268 root     2560K 464K sleep   59    0   0:00:00 0.0% ttymon/1
   407 root       15M 6648K sleep   59    0   0:00:04 0.0% fmd/18
   287 root     2088K 320K sleep   59    0   0:00:00 0.0% smcboot/1
   290 root     2080K 192K sleep   59    0   0:00:00 0.0% smcboot/1
   251 root     9512K 4072K sleep   59    0   0:00:03 0.0% inetd/4
   264 root     2504K 848K sleep   59    0   0:00:00 0.0% ttymon/1
   250 root     2168K 680K sleep   59    0   0:00:00 0.0% sac/1
   289 root     2080K 184K sleep   59    0   0:00:00 0.0% smcboot/1
   210 root     2536K 920K sleep 100    -   0:00:09 0.0% xntpd/1
   238 daemon   2488K 2048K sleep   60 -20   0:00:00 0.0% nfs4cbd/2
   201 root     2920K 1528K sleep   59    0   0:00:00 0.0% cron/1
   233 daemon   2800K 560K sleep   59    0   0:00:00 0.0% rpcbind/1
   132 root     6896K 1816K sleep   59    0   0:00:00 0.0% devfsadm/8
   123 root     2184K 104K sleep   59    0   0:00:00 0.0% drd/2
   113 root     2640K 160K sleep   59    0   0:00:00 0.0% syseventd/14
   244 daemon   2392K 520K sleep   60 -20   0:00:00 0.0% lockd/2
   135 daemon   4632K 2728K sleep   59    0   0:00:00 0.0% kcfd/5
Many thanks
Andreas
Edited by: support team on Mar 7, 2008 1:15 PM

13g 110dx

Similar Messages

Maybe you are looking for