14-n201tx wake up from sleep

Hi All ,
Can anyone let me know how to wake up HP 14-n201tx laptop from sleep .
Whenever I open it only power light , wireless and capslk light blinks and nothing else is happening .
Perhaps i have already tried  the following process but laptop is not waking up :
1: direct start up through adapter 
2: removed  the battery from laptop  then  I put  it back after an hour and then keept the laptop on charge for 2 hrs .
I will be really very grateful if someone can help me out to resolve  this asap.
Thanks 
GS

GS_04 wrote:
Hi All ,
Can anyone let me know how to wake up HP 14-n201tx laptop from sleep .
Whenever I open it only power light , wireless and capslk light blinks and nothing else is happening .
Perhaps i have already tried  the following process but laptop is not waking up :
1: direct start up through adapter 
2: removed  the battery from laptop  then  I put  it back after an hour and then keept the laptop on charge for 2 hrs .
I will be really very grateful if someone can help me out to resolve  this asap.
Thanks 
GS
Hi GS,
I found this document that might help.  You didn't mention which operating system you are using, but this one is for Windows 8.  Please let me know if this helps. 
Laptop won't wake from Sleep mode
Tobindo
A non-hp representative

Similar Messages

  • TS1367 I am asking this question about my 27 inch iMac Desktop Computer. I normally use my Laptop and very seldom use the desktop but was going to download the new software earlier today. I could not wake it from sleep.

    The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in  the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
    Jean

    The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in  the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
    Jean

  • Hp laptop doen't wake up from sleep

    Hi. i bought an hp 250 laptop 7 month ago from budapest and during this 8month i have done every thing to make it usable but still its not usable. first for long time i used days and nights to try different operating systems and googling solutions and downloading and installing drivers and making sure windows and drivers are up to date. then I gave the laptop to support service and after long time i noticed they just changed motherboard but problem is same as before. i gave back the laptop for second time and they changed the ram that was also faulty but again the sleep mode problem was same. i tried changing operating system and updating drivers and bios again but the problem was same. so for the 3rd time i asked hp central guarantee service to help me this time with different repairer and i explained the problem and gave it and after i got back the laptop for 3rd time they said they changed motherboard again but again nothing problem changed about the sleep.shouldnt the guarantee change the laptop if they cant make laptop usable after 3 times i gave it to them? i think i will be affraid to buy any thing with hp label for my whole life now. please help me or let me know if i should just throw it away.

    Hello all- I haven't seen a resolutoin posted on this so wanted to include my laptop which has a similar problem.  It's a Toshiba Satellite L655D-S5145 running Windows 8.  This is an intermittent problem and so far has been unpredictable in terms of repeating it, but when it happens essentially it will not wake up from sleep (or some unknown locked state) when the lid is opened from a closed position.  Sometimes the fan can be heard running, and the 1st 3 lights are on as white.  The normal sleep state has the 1st and 3rd lights white, with the 2nd one slowly blinking orange.  The basic symptom is that the screen stays blank and I at first thought this was an intermittent monitor/hardware problem, but I am now thinking it is some type of subtle software or driver bug.  If anyone runs across a definitive fix please post it.  Doing a System Restore or the like is not an option for me at this point. ps- Toshiba support, if you're listening I am 100% confident that someone on your support or engineering teams knows what this problem is so please speak up 

  • Early 2008 Mac Pro wakes up from sleep with Mavericks.

    Ever since I upgraded to OSX Mavericks on Tuesday, my early 2008 Mac Pro keeps waking up from sleep mode every couple hours. It goes back to sleep again on its own though after a minute, so I'm thinking it's some kind of new automated feature that I'm not aware of. With the Mac Pro being fairly loud when it wakes up from sleep mode, it woke me up three times last night! Is there some kind of option in the system preferences that I'm not aware of that can deactivate this new behavior? I usually only shut down my computer once a week, and keep it in sleep mode when I'm not using it most of the time, but I'm going to have to start shutting it down every  night now to keep it from waking me up throughout the night...

    Hello MARl0,
    You may want to disable the Power Nap functionality, if available, in System Preferences -> Energy Saver.
    OS X Mavericks: Change Power Nap settings
    http://support.apple.com/kb/PH14391
    Cheers,
    Allen

  • Why does my macbook pro not wake up from sleep?

    I have a brand new Macbook Pro 13inch. It freezes up when I try to wake it from sleep. I was wondering if there is a fix for this.

    Hello,
    Thanks for visiting the Apple Support Community!  Have you performed all of the software updates on your MacBook Pro?
    To do this:
    1. Click the Apple Logo in the top left
    2. Choose "Software Update"
    3. Click "Check for Updates"
    Install any available updates and restart your Mac. Let us know if this resolves it or not.  Additionally, you have posted in the iPhone Discussion area; for future reference please post in the correct category.
    Thanks!

  • After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

    hello,
    after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
    the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
    The only "solution" is to restart my Mac.
    - SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

    I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
    My solution:
    Cold start with Command-v pressed.
    This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
    What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
    Maybe Cmd-v set open firmware params and fixed some corruption.
    Anyway: my mac mini works again.

  • Macbook Pro wakes up from sleep when express card inserted

    Hi,
    my macbook pro (no unibody, 10.5.7) wakes up from sleep when I have my express card 34 (Hama 16GB) inserted. Is there any trick to disable wake up when a drive is inserted? I tried to eject the disk before going to sleep with a shell script but it automounts the device... I attached my log... I hope somebody can help! Thanks a lot!
    ==============LOG======================
    Jun 26 13:19:09 philipp-knobelspiess-macbook-pro kernel[0]: jnl: disk1s2: replay_journal: from: 306176 to: 983040 (joffset 0x8bef000)
    Jun 26 13:19:13 philipp-knobelspiess-macbook-pro kernel[0]: jnl: disk1s2: journal replay done.
    Jun 26 13:19:13 philipp-knobelspiess-macbook-pro fseventsd[36]: event logs in /Volumes/SSD/.fseventsd out of sync with volume. destroying old logs. (1518 4 1653)
    Jun 26 13:19:13 philipp-knobelspiess-macbook-pro fseventsd[36]: log dir: /Volumes/SSD/.fseventsd getting new uuid: AC3ADEEB-E85B-458C-8A86-1B706D14F54A
    Jun 26 13:19:17 philipp-knobelspiess-macbook-pro kernel[0]: hibernate image path: /var/vm/sleepimage
    Jun 26 13:19:17 philipp-knobelspiess-macbook-pro kernel[0]: sizeof(IOHibernateImageHeader) == 512
    Jun 26 13:19:17 philipp-knobelspiess-macbook-pro kernel[0]: Opened file /var/vm/sleepimage, size 4294967296, partition base 0xc805000, maxio 400000
    Jun 26 13:19:17 philipp-knobelspiess-macbook-pro kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 4
    Jun 26 13:19:17 philipp-knobelspiess-macbook-pro kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
    Jun 26 13:19:20 philipp-knobelspiess-macbook-pro kernel[0]: System SafeSleep
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: hibernatepage_listsetall start
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: hibernatepage_listsetall time: 158 ms
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: pages 293269, wire 126743, act 61368, inact 12, spec 2, zf 0, throt 3292, could discard act 51190 inact 6589 purgeable 3063 spec 41010
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: hibernatepage_listsetall found pageCount 191417
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: IOHibernatePollerOpen(0)
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: writing 190148 pages
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: image1Size 281734144
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: all time: 13298 ms, comp time: 1224 ms, deco time: 0 ms,
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: image 398541312, uncompressed 778846208 (190148), compressed 392607896 (50%), sum1 bf0603be, sum2 de99627
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: hibernatewriteimage done(0)
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: sleep
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: Wake reason = EHC1 EHC2
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: System Wake
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: Previous Sleep Cause: 0
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: USB (EHCI):Port 3 on bus 0xfa connected or disconnected: portSC(0x301803)
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: disk1s2: media is not present.
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]:
    Jun 26 13:19:36: --- last message repeated 1 time ---
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: disk1s2: media is not present.
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: C4-4E9D-BCD9-7C287E26A2E2/live.0.indexHead] [FSLogMsgID 1823370559] [FSLogMsgOrder Last]
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/73B2C840-CEC4-4E9D-BCD9-7C287E26A 2E2)(Error) IndexStore in SIStoreDirytySDBChunks:Error storing dirty sdb pages: 22
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]: disk1s2: media is not present.
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/0AA31246-CE25-4B90-906A-D905FB25F 156)(Error) IndexCI in ci_ftruncate:ftruncate(62 /Volumes/SSD/.Spotlight-V100/Store-V1/Stores/0AA31246-CE25-4B90-906A-D905FB25F1 56/live.0.indexPostings, 4194304) error:22
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]:
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/73B2C840-CEC4-4E9D-BCD9-7C287E26A 2E2)(Error) IndexCI in CIMetaInfoSync:sync err: 22
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro kernel[0]:
    Jun 26 13:19:36 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/0AA31246-CE25-4B90-906A-D905FB25F 156)(Error) IndexCI in initPayload:ftruncate err: 22
    Jun 26 13:19:37 philipp-knobelspiess-macbook-pro kernel[0]: jnl: disk1s2: close: journal 0x6ed7d10, is invalid. aborting outstanding transactions
    Jun 26 13:19:38 philipp-knobelspiess-macbook-pro TextMate[56798]: Error checking for new version: no Internet connection
    Jun 26 13:19:38 philipp-knobelspiess-macbook-pro TextMate[56798]: Will try again in one hour
    Jun 26 13:19:39 philipp-knobelspiess-macbook-pro kernel[0]: jnl: disk1s2: replay_journal: from: 983040 to: 1221120 (joffset 0x8bef000)
    Jun 26 13:19:47 philipp-knobelspiess-macbook-pro kernel[0]: hibernate image path: /var/vm/sleepimage
    Jun 26 13:19:47 philipp-knobelspiess-macbook-pro kernel[0]: sizeof(IOHibernateImageHeader) == 512
    Jun 26 13:19:47 philipp-knobelspiess-macbook-pro kernel[0]: Opened file /var/vm/sleepimage, size 4294967296, partition base 0xc805000, maxio 400000
    Jun 26 13:19:47 philipp-knobelspiess-macbook-pro kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 4
    Jun 26 13:19:47 philipp-knobelspiess-macbook-pro kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
    Jun 26 13:19:47 philipp-knobelspiess-macbook-pro kernel[0]: jnl: disk1s2: journal replay done.
    Jun 26 13:19:49 philipp-knobelspiess-macbook-pro kernel[0]: System SafeSleep
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: hibernatepage_listsetall start
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: hibernatepage_listsetall time: 158 ms
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: pages 293840, wire 126507, act 62230, inact 13, spec 0, zf 0, throt 3290, could discard act 51190 inact 6658 purgeable 3007 spec 40945
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: hibernatepage_listsetall found pageCount 192040
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: IOHibernatePollerOpen(0)
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: IOPolledInterface::checkForWork[4] 0xe00002eb
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: all time: 6 ms, comp time: 0 ms, deco time: 0 ms,
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: image 0, uncompressed 0 (0), compressed 0 (0%), sum1 90b9c243, sum2 0
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: hibernatewriteimage done(e00002eb)
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: sleep
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: Wake reason = EHC1 EHC2
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: System Wake
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: Previous Sleep Cause: 0
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: USB (EHCI):Port 3 on bus 0xfa connected or disconnected: portSC(0x301803)
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: disk1s2: media is not present.
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]:
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: disk1s2: media is not present.
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/73B2C840-CEC4-4E9D-BCD9-7C287E26A 2E2)(Error) IndexStore in SIStoreDirytySDBChunks:Error storing dirty sdb pages: 22
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]:
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/0AA31246-CE25-4B90-906A-D905FB25F 156)(Error) IndexCI in ci_ftruncate:ftruncate(62 /Volumes/SSD/.Spotlight-V100/Store-V1/Stores/0AA31246-CE25-4B90-906A-D905FB25F1 56/live.0.indexPostings, 4194304) error:22
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]:
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/73B2C840-CEC4-4E9D-BCD9-7C287E26A 2E2)(Error) IndexCI in CIMetaInfoSync:sync err: 22
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro mds[30]: (/Volumes/SSD/.Spotlight-V100/Store-V1/Stores/0AA31246-CE25-4B90-906A-D905FB25F 156)(Error) IndexCI in initPayload:ftruncate err: 22
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: IOBlockStorageDriver[IOBlockStorageDriver]; executeRequest: request failed to start!
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]: disk1s2: device/channel is not attached.
    Jun 26 13:19:51 philipp-knobelspiess-macbook-pro kernel[0]:
    Jun 26 13:19:52: --- last message repeated 1 time ---
    Jun 26 13:19:52 philipp-knobelspiess-macbook-pro kernel[0]: jnl: disk1s2: close: journal 0x6ed7d10, is invalid. aborting outstanding transactions
    Jun 26 13:19:52 philipp-knobelspiess-macbook-pro fseventsd[36]: disk logger: failed to open output file /Volumes/SSD/.fseventsd/00000000015455f1 (No such file or directory). mount point /Volumes/SSD/.fseventsd

    Hey, thanks 4 your response... Well I figured that out... I hoped that there was a way to prevent system calls, regarding devices, to wake up my macbook pro... something like: forbid interrupts while asleep
    If you ever hear of a way to fix it please let me know...
    I think a solution would be to disable automount on the express card device... I use it for my time machine backup and really DON'T want to remove the card every five minutes...
    Cheers, Philipp

  • After 10.9.3 update monitor doesn't wake up from sleep

    I have an LCD connected to the Mac Mini via a mini-DP to DVI adapter and a video projector is connected directly at the HDMI.
    The LCD is the "main" screen while the projector is only switched on for watching TV or movies.
    My "Computer sleep" is set to "never" and "display sleep" to 15min.
    All was working well until I updated to 10.9.3 ...
    Now, when the LCD goes to sleep (projector is powered off) it doesn't wake up any more.
    The computer is running and it is responding to my key-presses etc. but the monitor remains in a coma.
    Powering the monitor off and on again resolves the issue, e.g. the display shows correctly.
    This is however only a temporary fix as it refuses to wake up  upon the next sleep...
    The monitor itself is fine, it works on other systems flawlessly, e.g. on an older Mini.
    Any ideas?
    I have already force-fed it with the combo-udate but that didn't help.

    My iphone 3GS does the same thing, not only does it suddenly fail to wake up from sleep. It just crashes and I have to do a hard reset. Today it just turned off when the ipod was playing I was a mile away from it and it was in airplane mode as well. I have restored from backup once and would dearly love to have it downgraded but that doesn't seem to be much of an option. My phone ran like a dream before the upgrade....now I hate to say it but its completely unreliable.
    With so many people experiencing the same problem it makes me wonder why there isn't a fix.

  • My imac freezes , need to restart everytime i wake it from sleep mode. just started happening 2 weeks ago.

    For about 2 weeks whenever I return to my imac and tap the mouse to wake it from sleep mode my screen is frozen. I have tried to wait for it to unfreeze but it doesnt wake. I cannot get any results from using the mouse or the keyboard. I always have to hard reset the computer to be able to use computer again. My mac is a year old. Anyone have any thoughts as to why tis is happening? Thanks

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • My MacPro will not wake up from sleep after the 10.8.2 upgrade.

    Since latest os upgrade to 10.8.2, my mac will not wake up from sleep.

    Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
     *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • IMac G5 iSight will not wake up from sleep

    This has been happening to me for some time.
    Occasionally my Mac do not wakes up from sleep. Instead it hangs!
    Here how it goes:
    I press a key on keyboard; my Mac wakes up, but screen remains black with only mouse pointer. I cannot see login window.
    And Mac stays this way for hours. No matter if I press a key, click a mouse.
    The only remedy is to press power button and to shut it down.
    Then I have checked console.log. Nothing spectacular. Here is log from last accident:
    Jul 31 21:43:36 snukec kernel[0]: System Sleep
    Jul 31 21:43:36 snukec kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    Jul 31 21:43:36 snukec kernel[0]: System Wake
    Jul 31 21:43:36 snukec kernel[0]: Wake event 0020
    Jul 31 21:43:36 snukec kernel[0]: USB caused wake event (OHCI)
    Jul 31 21:43:37 snukec kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
    Jul 31 21:43:38 snukec kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    Jul 31 21:43:42 snukec kernel[0]: AFPSleepWakeHandler: waking up
    Jul 31 21:43:42 snukec kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending ext sleep wakeup
    Any idea what to do?
    Matej

    Wait - before you take it in for repair or get put on hold with Support try this:
    Go to System Prefs, Energy Saver, then set your display sleep and computer sleep times the same. Check both check boxes too.
    Trust me, I've been working on this problem with Apple and checking the discussion boards for over a year now. I've had my logic board replaced, power supply replaced, been through about 8 Apple techs and tried just about anything you'll read on these boards or get told to do by a tech. If you notice about every 4th or 5th page has someone posting about this problem. The above suggestion is the most recent thing I tried (from reading posts here in this forum, not from an Apple Tech) and it has come out of sleep for the past 30+ tries without a problem. This is not to say this is IT(the final sovle), because it has been known to go on a good run for a week or so and then come up again. This 'fix' however, has been the most promising. If it continues to work, I will let Apple know and hopefully they can fix the bug. They have all sorts of case history with me on this problem.

  • IPhone 5 won't wake up from sleep/standby!!

    Hello, I am having a really strange problem with my iphone 5 for last 3-4 months. Sometime when i want to use my iphone from standby/sleep mode it dosent do anything! sleep/wake button, home button even silent/sound button dosent work. I know the silent/sound button dosen't work cause normally it vibrate when I turn it on. So the problem is my phone wont wake up from sleep/standby mode. The screen stays black and nothing works. If i press the home button and power button for 10-15 time very quickly, then it takes a screen shot and wakes up!! Sometime it stays in this stage for 5-10min.
    So here is what i did to solve the problem.
    1. I restore the phone from phone and ituens.
    2. I delete all icloud backup and started as a new phone
    3. I went to apple store and replace the phone with a new one!!
    4. I jailbreak it at last to see if it solve the problem!
    5. turn off the icloud to see if it works
    And sadly nothing of all this solved my problem! Now im not sure any specific app causing the problem but it almost impossible to find it out. So if anyone have any similar problem or any suggestion to solve it, then it will be really helpful.

    Hi All,
    I hope I don't jinx it by posting this.  Yesterday I changed two of my settings and the issue has not occured again.
    I changed the carriers settings and the LTE settings.
    I went into "Settings" - then went into "Carrier" - Then I switched the "Automatic" to "OFF" I waited for the the carrier to show up (in my case Vodafone), then selected "vodafone au" manually.
    Then I went into "Settings" - Then went into "General" - then I switched OFF the "Enable LTE" option (In my case I have switched this option OFF as I have not been sent the message to advise that I now have 4G service. According to Vodafone support, Not all vodafone customers have 4G only a selected 40 thousand customers accross Australia, I think all customers will have 4G around mid July )
    Once this is done, I switched the phone off, Waited around a minute and then switched the phone back on.
    I will update in a week if the problem doesn't happen.

  • Application launches fail after wake up from sleep when switching from one open directory to another

    I take my MacBook Pro back and forth from home to work.  Open Directory is set up at both locations running on Snow Leopard server.  These two locations are entirely separate domains and IP networks.  The only thing that is the same is my username and password, which is the same in both locations.
    If I put my machine to sleep in one location and move to the other location and wake it up, I can usually launch one application, then no other applications launch and the machine is pretty much frozen up except for mouse cursor movement.  Using command-shift-escape and relaunching the finder doesn't help.
    It is as if the launch daemon has been made inoperative.  Apps just sit and bounce.
    Should one be able to log in one one network with open directory. Close all applications, move to an entirely different network, and wake up from sleep and continue working?  The login/password is identical on both open directory setups.
    Both home and work are set up so the users can "travel" and the machines are not "bound" to the open directory server.
    I've started using the "other" login box to login in which I think keeps the machine more independent of open directory and that seems to work better for moving between networks.
    Any ideas and/or comment welcome.
    (my DNS seems fine in both environments.  running changeip gets "success" in both places)

    After reading another post that popped up under "More Like This" after I posted this I may have found at least a temporary fix.  Unplugging and reseating the MDP adapter in the MacPro didn't accomplish anything but unplugging/reseating the HDMI plug in the Viewsonic brought it back to life.
    I guess I can live with this but it would be nice knowing that there's a more permanent fix for this.

  • Thunderbolt ethernet not working when computer wake up from sleep.

    thunderbolt ethernet not working when computer wake up from sleep.
    it will not happen in Mountain loin.

    I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
    In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
    In this case the problem was related to mDNSResponder task which handles all dns queries.
    It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
    The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
    QUESTION: Is your problem independent of the access point / router you connect to.
    I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
    No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
    Software is of poor quality. Not much more to say in this matter.
    I found a very interesting article dated 1996 about programming which I think is still valid.
    Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
    Below the fragment (with some connection to Apple)
    Software is everything. It also s***s.
    "It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

  • T400 - Fn Key wakes computer from sleep.

    So, is it normal that by pressing Fn Key + any other key (on the keyboard) - computer wakes up from sleep??
    Or is something wrong with the OS?
    Solved!
    Go to Solution.

    Actually, the Fn key alone should wake the machine from Sleep/Standby.
    Nothing wrong with the OS.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

Maybe you are looking for

  • Migrating a webi report from one environment to another using import wizard

    Hi Everyone, Can anyone please tell me what all access should I have on my ID to be able to migrate a webi report from one environment to another environment(e.g. from development to quality). Regards, Neeraj Sharma

  • PNG resize issue

    Im resizing a PNG in my app, on iOS (on device it looks fine) but on Android (simulator) it looks jagged. It looks fine on android when it is not resized. I have turned on smoothing and tried redrawing the bitmap using a matrix scale but it doesnt wo

  • Need to write on a document that i have received via email.  how do I do this??

    how do i enable a document that i have accessed on line so that i can write on it?????

  • Adding to the play count number

    Is there a way to add to the playcount without: playing the song and clicking the end of the timeline bar and repeating? I like to keep the playcount, espcially when getting rid of duplicate songs.

  • Problem with schema processor

    Hello, I'm using the newest xml xdk (9.2.0.3.0) for windows. I have the following test example for the schema-processor <?xml version="1.0" encoding="UTF-8"?> <REPORT ID="4711" xmlns="http://www.oracle.com/REPORT" xmlns:COMOD="http://www.oracle.com/R