141 GB download for last month!

How accurate is the BT broadband usage in My BT? It says I have downloaded 141GB for the last month. Never downloaded anything near this astronomical amount when with Sky.
I'm on Infinity 2 so not too bothered, just very puzzled.

BarnyG wrote:
Further info. Just checked the router -
Connection time:- 26 days 02.22
Data Transmitted/Received 2.2gb/2.0gb
This bears no relation to My BT unless it resets each month. Does this happen?
Is there another stats page? Some routers are known to report erroneous values in certain places - e.g. my TG582n would max out at about 4GB up and down on the detailed stats page, but would show correct values on the Internet stats page.
Ian.
Thanks
Ian
http://www.siteguru.co.uk/be/ADSL2PlusForDummies.pdf - Having ADSL issues? Then read this PDF
Please don't click the star beside my name - too many stars makes you look like a swot!

Similar Messages

Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? Many thanks.

Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? My iPhone was stolen and the photos in it are very precious to me. Many thanks.

On a new device you can only download what is currently stored in "My Photo Stream" in iCloud. iCloud keeps up to the last 1000 photos, but only the photos, that have been added during the last month. Older photos may be removed, when the time is up. On other devices you may be seeing older photos as well in "My Photo Stream", that will depend on the available storage on those devices, and when the Photo Stream has been enabled on those devices, see: My Photo Stream FAQ - Apple Support
If you are seeing other photos in the Photo Stream on other devices, that you want to save, mail them to you from the other devices.
Have you tried to restore your iPhone from the last iCloud backup of the old phone? The backup will contain the photos in the Camera Roll, but not the photos in Photo Stream. iOS: Back up and restore your iOS device with iCloud or iTunes

STAD Report for last month

Hi,
   Iam getting stad report for last one week,iam not getting the stad report for last month.i want to get stad report for particular day in last month.how to rectify the same.
Thanku

Hi,
rsau/local/file /usr/sap/LID/DVEBMGS00/log/
you will have to set DIR_AUDIT parameter instead of it.
Set the following parameter with reference value:
Parameter                                  Description                                   Reference Value
DIR_AUDIT                  Directory for security audit files          S:\ECP-AUDIT\ECP\DVEBMGS00\ECP_security_audit_log
FN_AUDIT                  Name of security audit file                   ECP_AUDIT_++++++++.AUD
rsau/enable                  Enable the Security Audit Log                       1
rsau/max_diskspace/local       Maximum space for security audit file                 2147483647
rsau/max_diskspace/per_day Maximum size of all security audit files per day            (If you wish, otherwise let it be default '0')
rsau/max_diskspace/per_file      Maximum size of one single security audit file             (If you wish, otherwise let it be default '0')
rsau/selection_slots              Number of filters to allow for the Security Audit Log            (If you wish, otherwise let it be default '2')
rsau/user_selection              Defines the user selection method used inside kernel functions         (If you wish, otherwise let it be default '0')
activated profile in sm19,still iam not getting audit log for last week in sm20.
After Proper setting of Security Audit log parameters, the Application Server needs to be restarted to make the changes effective. You will only get the Audit Data since the activation of valid Security Audit parameter.
Regards,
Bhavik G. Shroff

How do I know what transactions executed by specific user for last month

All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.

Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...)

Getting the data for last month of every year

Hi,
How to declare the date if we want to pull the data from the December of every year.
For example if the query is run in march 2015 and they want the historical data it should pull only the data from dec 2014.
In the same way if they ran the query in future jun 2016 and if they want to historical data it should pull only data from dec 2015.
It should not coded manually. Please help me with date format that need to used.
BALUSUSRIHARSHA

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
A table has to have a key to be table. Here is my guess at a repair job:
CREATE TABLE Test_Data
(pu_id INTEGER NOT NULL
REFERENCES PU(pu_id),
pu_date DATE DEFAULT CURRENT_TIMESTAMP NOT NULL,
PRIMARY KEY (pu_id, pu_date),
x_count INTEGER,
y_count INTEGER);
Identifiers are not numeric in a good schema. What math do you do with them? They are also the key in the table that models the entity they identify. Where is the PU table (and what is a PU anyway)?
INSERT INTO Test_Data
VALUES
(28, '2014-01-01', 10, 20), -- crap! No key in this mess!!
(28, '2015-01-01', 30, 20), --
(28, '2014-12-12', 10, 20),
(28, '2015-02-02', 10, 20);
A PIVOT is not a query and not even part of SQL. It is how Microsoft programmers who do not know RDBMS or have a report writer violate the tiered architecture of SQL. We also do not use XML mixed in SQL. It is a bitch to maintain, has poor performance and again
violates the tiered architecture principle.
A query is not sorted because it is a table. A file in COBOL can be sorted and that seems to be what you really want to write.
Old COBOL love the Sybase CONVERT() string function to avoid SQL temporal data.
We never use SELECT * in production code; Google it. Not only are you generating code, you are generation bad code.
Since SQL is a database language, we prefer to do look ups and not calculations. They can be optimized while temporal math messes up optimization. A useful idiom is a report period calendar that everyone uses so there is no way to get disagreements in the DML.
The report period table gives a name to a range of dates that is common to the entire enterprise.
CREATE TABLE Month_Periods
(month_name CHAR(10) NOT NULL PRIMARY KEY
CHECK (month_name LIKE <pattern>),
month_start_date DATE NOT NULL,
month_end_date DATE NOT NULL,
CONSTRAINT date_ordering
CHECK (month_start_date <= month_end_date),
etc);
These report periods can overlap or have gaps. I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601
data format required by Standard SQL and it is language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00'
This will port and waste time calling string function row by row.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Photo continually is downloading for 3 months

My iPhone 5s is has been downloading for 3months it appears that when I changed phones that it is stuck on downloading picture from the cloud

Hi Raevenlock,
Welcome to Adobe Forum,
You can buy key card subscription for 3/6/12 months.
Please check this: http://www.amazon.com/Adobe-Creative-Membership-Pre-Paid-Product/produ ct-reviews/B007W76ZLW
You can ceheck these link also :http://bookweb.syr.edu/ePOS/form=item.html&item=W49163&store=1
http://ucsandiegobookstore.com/p-55021-adobe-student-teacher-licensing -creative-cloud-12-month-subscription-keycard.aspx
You can install & activate the Cc on two computers.
Please let us know if it helped you.
Regards,
Rajshree

Depreciation is not executed for last month and the period is closed. Giving Error in this Dep. Cycle.

Hi All,
We had a month End scenario where the depreciation for a company code is not executed for the last month and closed the period without checking it.
While running the Depreciation posting for this month we encounted a error that last motn period is closed. Can we do the depreciation without opening the period closed. Kindly let us know the options available.
Regards,
Lakshmi Narayana

Lakshmi,
There is no way you can post depreciation without opening the prior periods. Please discuss with your business and secure all necessarry approval, I believe the business has a process on this kind of situations. As long as it is fully documented, auditors will not find it wrong.
This is the best time to improve your process, think of possible ways so that business will not forget to post depreciation (e.g send automatic email during 3 days before, 2 days before., 1 day before and during the day of depreciation run).
Hope this helps.
Thanks!
Jhero

MMPV for last month of year

Hi Guru's
I am going to open MM period through MMPV for jaunary 2010.
i am puting period = 01 and Fiscal year 2010
and getting error message that " 2010 is not your current cleander year.
so what is my fiscal year in this case??
seeking your help.
Regards,

Hi
Check it out in the FI whether they opened the fiscal year in FI or not. Check with transaction OB52, whether FI has opened their periods or not.
If not, then let them opened it first then you have to open MM period.
Regards
Imran

Ebay sent me an invoice for $61.00 for last month - why

Ebay charges a final value fee (FVF) when you sell an item. Check your sellers account for details.

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Powershell Change date to the first day of last month whenever i run the script.

If I run the script on 2/4/2013 or any other day in February I want the date to be change to 1/1/2013. I am replacing date on line 59 with this value.
Get the content of the CMS Script.
$CMSReport = Get-content C:\reports\CMSReport.acsauto
Go to line 59 and replace the date for Last Month date.
$CMSReport[58] = $CMSReport[58] -replace "([1-9]|0[1-9]|1[012])- /.- /.\d\d", [datetime]::Today.ToShortDateString() $CMSReport | Set-Content C:\reports\testCMS.acsauto
Run the CMS script
Invoke-Expression -command "c:\reports\testCMS.acsauto"

PS C:\> $lastMonth = (get-date).AddMonths(-1)
PS C:\> $firstDayOfLastMonth = get-date -year $lastMonth.Year -month $lastMonth.Month -day 1
PS C:\> "{0:yyyy-MM-dd}" -f $firstDayOfLastMonth
2013-01-01
Bill
Hello AbqBill,
Thanks for getting me there. I am a lot closer to the final goal. I input what you suggested and I am getting different results as you. here what I did.
$LastMonth = (Get-Date).AddMonths(-1)
$FirstDayofLastMonth = Get-Date -year $LastMonth.year -month $LastMonth.month -day 1
$CMSReport = Get-content C:\reports\CMSReport.acsauto
$CMSReport[58] = $CMSReport[58] -replace "([1-9]|0[1-9]|1[012])[- /.]([1-9]|0[1-9]|[12][0-9]|3[01])[- /.](19|20)\d\d", "{0:dd/MM/yyyy}" -f $FirstofLastMonth
$CMSReport | Set-Content C:\reports\testCMS.acsauto
I get 12/1/2013. Which bring me to 2 questions. How will this solve when it is January and it has to put last month last year? and why is it going back two month instead of 1?

Routine to capture last month data

Hello Frnds,
For a Dataload from the datasource Actual Cost Component Split(0CO_PC_ACT_10), we want to capture last month data ,
we are planning to write a routine in infopackage level,
using the option 6-ABAP routine, to select the last month data ,
we have the time characteristics 0FISCPER, At present we managing the load by manually changing the selection for last month every time ,
It would be a great help if anybody can show a sample code to select last month data,
Thanks,
saty

If 'last month data' for you is equivalent to 'actual month data', post this code (corrected) into your IPACK dynamic selection:
DATA: zyear type /BI0/OIFISCYEAR,
______zperiod type /BI0/OIFISCPER3,
______zfiscper type /BI0/OIFISCPER.
CLEAR: zyear,
_______Zperiod,
_______zfiscper.
MOVE sy-datum+0(4) to zyear.
MOVE sy-datum+4(2) to zperiod.
concatenate zyear zperiod into zfiscper.
l_t_range-iobjnm = '0FISCPER'.
    l_t_range-fieldname = '/BI0/FISCPER'.
    l_t_range-sign = 'I'.
    l_t_range-option = 'EQ'.
    l_t_range-low = zfiscper.
    l_t_range-high = zfiscper.
    APPEND l_t_range.
Message was edited by: Claudio Caforio

How to get the sales value of the last month in the quarter

Hi,
We have a requirement to get the "Sales" value against a quarter. We have 2 tables "Time" and "Sales". We want to display the Sales value against each quarter.
But this should happen as follows.
Consider quarter Q1 it should display the value of 3rd month, Q2 should display value for 6th month and so on..
If in any particular Quarter we dont have a value for last month then it should display the value for 2nd month, if 2nd month value is also not present then it should display 1st month sales value.
We are using excel as the database.
Please let us know if anybody has a resolution to this.
Regards,
Apoorv Chitre

hi,make an other column which will be the flag for the last months you want to be displayed...
so ,in reports,you pass it as hidden column(by filter only the ones which have the appropriate flag),and then voila...
i hope i helped
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Query to retrieve the number of transactions done in every 1 hour for last

Hi,
Could anyone help in writing a query to retrieve the number of transactions done in every 1 hour for last month.
Case:
I/P
Cases Timestamp1
case1 01-01-2008 00:00:01
case2 01-01-2008 00:01:01
case3 01-01-2008 01:00:01
case1 01-01-2008 01:02:01
case4 01-01-2008 01:10:01
case5 02-01-2008 02:00:01
case6 02-01-2008 02:10:01
case7 02-01-2008 23:00:01
case.. 31-01-2008 24:00:00
O/P
from time to_time cases
01-01-2008 00:00:00 01-01-2008 01:00:00 2
01-01-2008 01:00:01 01-01-2008 02:00:00 3
etc
Any help really appreciated

We can do this using analytical functions
Following is what I did:
create table timestamp1 (ts date)
select *from timestamp1
30/10/2008 15:41:13
30/10/2008 15:41:05
30/10/2008 15:40:03
30/10/2008 14:58:26
30/10/2008 14:29:45
30/10/2008 13:17:48
30/10/2008 08:29:50
30/10/2008 06:05:51
30/10/2008 03:41:52
30/10/2008 02:29:54
select distinct to_char(ts,'hh24') frmhrs,
to_char(ts,'hh24')+1 tohrs, count(ts) OVER (order by to_number(to_char(ts,'hh24')) RANGE (1/24) PRECEDING )
from timestamp1
where trunc(ts)=trunc(sysdate) -- I added this just to make sure I get for today's data
order by frmhrs
FRMHRS     TOHRS     CNT
02     3     1
03     4     1
06     7     1
08     9     1
13     14     1
14     15     2
15     16     3
You can customizeas per ur need.

User Profile Data for One Month in ST03N

Dear All,
I have one question for a similar requirement.
I want to see the User Profile data for last month (e.g.August)
I navigate through the same path as described by you.
ST03N- Expert Mode- Total (select period)-- User Profile (from analysis view)
even though I have selected One month period (August) ; I could see only the data for one week (1st August to 7th August)
Can you please advice how can I solve my purpose, if not this time but may be in future I should be able to see complete one month data.
Thanks in advance.
Best Regards,
Jayesh

Dear Shailesh,
Thanks for the very prompt and accurate response.
However we have this job scheduled on monthly basis in our productive system, still there is no data avaialable.
Kindly advice.
Best Regards,
Jayesh

Which Time variable should use compare this month with last month

We want to calculate the increaed number of employees according to one action reason e.g. Entry to company compare with last month. In this case we have to use time variable in BEx query designer. Now can see 0calmonth has serval variable available.
1) Should we use [0CMLMON] for last month and use offset for this month like [0CMLMON]-1 or [0CMLMON]+1 or use variable [0RSTTCM1], which variable should we use for this month and last month? Do we need to create variables by manually?
2) Then using calculated KF to calculate the increaed number of employees, is this logic correct? If it is wrong, please info.
Edited by: hi ni on Apr 22, 2008 7:58 AM

Hi,
For the comparison of last 2 months data, you can use two Restricted Key figures with reference to 0CALMONTH and it is better to use only customer exit variable for both RKF's.For the Last month use offset value as -1.
Rgs,
I.R.K

141 GB download for last month!

Similar Messages

Maybe you are looking for