1410 all-in-one scannoing issue

Under windows xp, I could scan with a preview page that allowed separate items to be blocked, then scanned. It would then go back to the preview page and allow the other items to be blocked and then scanned. In scanning, I could edit the scanned item for size, resolution, etc.
In windows 7 I have lost all thes functions. If I preview, and select one item for scanning, I cannot edit the scanned item, and it goes back to before the preview and I must start all over.
Why have I lost the functionality of this printer just be having a newer Windows system???

Hello @arsailman,
Welcome to the HP Support Forums! I see since upgrading to the Windows 7 Operating system with your HP PSC 1410, you have lost some of the scanning features you previously had on Windows XP. I would like you to go ahead and complete the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure all the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410(DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-75052-1&cc=us&dlc=en&lc=en&...=
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

HP 1410 all-in-one Scanned Pictures not Saved

Recently upgraded my pc to windows 8.1 but the HP 1410 all-in-one printer scanner will not save scanned pictures. I attempt to "scan to file" but when I click finish I receive the option to scan more pictures or end (done). W"done" when I click done the "solution center" app returns to its home screen.
All other scanning properties are functioning correctly.

Hello there! Welcome to the forums @Dadoo1211
Please first try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. Please let me know the outcome!
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing 4x6 pics using the hp 1410 all in one printer

Printer hp 1410 all in one
OS Windows 2003
Computer Dell
Pictures downloaded from the internet and saved into "my pictures"
I am currently trying to print using 4X6 glossy advanced HP photo paper. I go to print I select paper size 4x6 with tab. On paper quality I select "other photo paper" as advanced photo paper is not an option(which I was directed to do so on the box of photo paper). I changed the width guide and put photo paper with tabs facing me and hp symbol up. The paper goes in half way and then the "check paper' light comes on. The picture paper jams and there is no ink on the paper. I have referenced the user guide and I am following all instructions to a tee but to no avail. Any tips would be greatly appreciated.

Printer hp Photosmart C3180 all in one
OS Windows XP Pro
Computer Dell Optiplex 745
Photo is JPEG on my computer
I'm having a similar problem with hp c3180 all in one printer, trying to print on 4X6 photo paper. I assumed it was because the back rollers were needing cleaned since that's always where the photo paper gets stuck (can't make the bend), so I did as I'd found in instructions elsewhere and cleaned those rollers with distilled water on clean, lint-free cloth. Didn't help, still jams there in the back every time. Printer thinks it's working OK sometimes, goes ahead and "prints" without getting any of the ink onto the photo paper since it's stuck there in the back and doesn't advance past that point. Very frustrating, can't get even one photo to print.

HP 1410 All in One Door Open Error

A friend gave me his HP 1410 All in One printer a while back, so I installed all the drivers to my Windows 7 Home Premiuim Sony Laptop. The Scanner works just fine, but when I attempt to print a document, files pile up in the queue with an error to the side, Door Open. I've closed the door, but still get this error. When I open it, the ink container centers, and when I close it, it goes back to one side of the printer, but the error remains. I've restarted the printer but the error remains. Is it a broken part, or is there a way to bypass the door check?

your door interlock is not makeing contac.chack the front door to see if it is lineing up whit the covers or see ifyou brook aneything inside the front cover whear you added toner.the interlock is in the front door of the michane also you can make sure all of the other doors is closed
tecnical support for hp printing

HP PSC 1410 All in One HANG INDEFINITELY with Remote Downlevel Document

Hi, after a few days of setting up my PSC 1410 All In One Printer, which is hooked up to a Compaq Presario V3000 running on Windows XP SP3 with AMD Turion 64x2 processor; and shared print to a Sony Vaio VGN FW33G, and a Mac Pro running on Snow Leopard OS X 10.6
Just yesterday, my printer was jammed with a "Remote Downlevel Document" which I can't remove after using these methods I've researched:
1. "Right Click and Cancel" x [indefinite] times
2. "Right Click and Refresh" x [indefinite] times
3. "Restart" x [indefinite] times
4. "Restart" with printer hooked on/off to the USB x [indefinite] times + [indefinite] combinations of whichever comes first
5. "Unhook USB and Click Start>Run "net stop spooler" and Rehook USB and Click Start>Run "net start spooler" x [indefinite] times
6. Did virus scan for suspicious virus using Anti Vir
7. And in between, combinations of the above x [indefinite] times
8. Search on the internet which obviously there's no real solution
Please help.
Regards,
Bobby

Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

HP PSC 1410 All In One, have driver problems...............................

I have an HP PSC 1410 All in one printer that I cannot print items from my computer on. When I try to print something from my computer my computer tells me that no driver for the printer is detcted but when I open "MY COMPUTER" and click Devices, it shows the printer listed as operational and that it is functioning properly.

I tried installing the driver and couldn't so I called HP and found out the printer is obsolete and no drivers are available........ they don't support that model anymore , So I'm screwed................

HP Psc 1410 all in one series Printing pink

Printer - HP Psc 1410 all in one series
Operating system - Microsoft windows Vista 32 bit
Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
Jamie

Please click here for a possible solution to your problem:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
Let me know if that helps.
Please click on KUDOS if you find my solution helpful.

HP PSC 1410 All-In-One no longer prints

I have an HP 1410 all in one. I also recently updated to Mac OS X 10.5 Leopard. My printer no longer prints. It will show up in the print queue and the status will say printing but nothing will happen. After a few seconds it claims the printer is ready to print and stops any jobs in the queue. I have tried resetting the printer, tested all the connections, power cycled it both with the power switch and power cable, restarted my computer multiple times, I've tried updating the drivers (but I'll try again here in a minute), and I'm out of ideas. Any suggestions?

Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'. The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
(I also tried these entries in the udev sane rules:
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
"SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
but they do not work).
Some previous threads:
https://bbs.archlinux.org/viewtopic.php?id=107474
https://bbs.archlinux.org/viewtopic.php?id=65431
Not able to install sane-dev from AUR; 'makepkg -s' gives error:
==> WARNING: Cannot find the git binary required to determine latest git revision.
Last edited by rnarch (2012-03-28 05:05:09)

Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
installing saned.conf in /etc/sane.d/saned.conf...
installing dll.conf in /etc/sane.d/dll.conf...
for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
/bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
done
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
/bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <[email protected]>.
make[4]: *** [install-lockpath] Error 1
make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[3]: *** [install-data-am] Error 2
make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Please note the line: Report bugs to <[email protected]>. Is it a bug? Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
Last edited by rnarch (2012-03-26 01:11:57)

Installing hp 1410 all in one

My All in one HP 1410 is plugged in and usb connected but after msg. PRINTER FOUND, my pc doesn't seem to be able to get it connected.
I am referring to installation on my window ex pea (sorry, am now on android)
Balet911

Hello @balet911 , I hope you are well!
I have a suggestion for you to try that should help you install your PSC 1410 on your Windows XP system.
Click this link and try these steps: Windows XP: The Progress Bar on the Software Installation Stops or Stalls
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP PSC 1410 All in one Printer not installed

In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

Hello Jai_pareek,
Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP OfficeJet J4580 All-in-one printing issue

Dear Sir or Madam,
Two years ago I purchased this all-in-one deskjet and for the first year it operated perfectly, both over usb and connected to my Airport wireless router. For the last year, however, I have been unable to get it to print correctly. Although it does print, the page misses multiple lines of printing. What I mean is that, for example, the bottom or top half of an entire line of words will not print, and the problem reoccurs multiple times on the page. It does not appear to occur regularly, and seems to be caused by the the black cartridge only.
Because the printer is no longer under warranty I have attempted to troubleshoot the problem myself. I have replaced both print cartridges with new HP branded media. I have run the clear cartridges utility and have cleaned the cartridge carriage contacts/ cartridge contacts using a Q-Tip with distilled water. I have also removed the black cartridge for two hours and turned it upside down as recommended. The problem does not occur in the copy or fax function - but does occur with wireless and usb-connected printing. The test page prints correctly.

First solution is to do a partial reset.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00720603&cc=us&lc=en&dlc=en
If this doesn't bring the solution!
perform a re-install of the printer.
if this doesn't help - you could do a re-install with an alterantive driver , of the 990C.
( this driver is standard available in windows software!)
add printer and use/pick the driver of the 990C.
I work for HP but posts and replies are my own.

All in One printer issue with Windows 8.1 update

Hi all,
Hoping someone out there may be able to help with the following.
I have a Canon MG8250 all in one printer/scanner. All was fine on Windows 8, but then upgraded to 8.1 a couple of weeks ago. Just got round to using the printer and scanner and the printer wouldn't work (scanner was fine). Uninstalled MP drivers and reinstalled from Canon site and all seemed fine with the printing. Alas the scanner now would not work. Did the same, uninstalled MP Navigator Ex and reinstalled from Canon site, but no fix this time. PC says "Cannot start MP Navigator Ex" and printer says "Set PC to start scanning".
Anybody know how to fix?
Thanks,
Peter

Hi @louielou581 ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the email address in your post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

HP Officejet Pro 8500 all-in-one printer - issues after upgrading to Windows 8.1

After successfully downloading a driver from the HP website to enable using this all-in-one printer with a new HP laptop using a Windows 8.1 OS, I confirmed that the printing function works normally (just as it did with a Windows XP OS on my wireless home network).
However, I don't find any icons appearing on the 8.1 desktop for other HP apps (e.g. HP Solution Center, HP Photo Creations). I do have an icon for the Printer. When opened, it shows two options: 1) add a new printer and 2) add new software (from the original CD). But the original CD is for the XP OS, which I don't try and possibly mess up what already is working.
So-o-o, Is there any HP software download available for HP apps to use with this printer, especially HP Solutions Center?

Hi Riley.
You can get HP Photo Creations here:
www.hp.com/go/hppc
It's a free download for Mac and Windows.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Photosmart c7280 All-in-one Network Issues

Hi, i was given this printer (Photosmart c7280 All-in-one) by my dad about a year ago it worked flawlessly for quite some time. However a few months ago we had a really bad storm and lost power and ever since then I have been getting error messages and my network radio has not been working at all. I am afraid that it might be fried but if i could have any help troubleshooting it at all that would be greatly appreciated! Also, i was reading some other help forum posts and tried to reset it (# and 6 while powering on) and it printed out a connectivity status report by itself. It says "The wireless network interface (Wifi0) is not functioning properly. This may be a problem with the printing device hardware." Again im afraid it might never work again but any help is appreciated! Thanks

Hi,
Since you have tried performing reset and printer status shows as WIFI ICU not working, you can try connecting printer with an ethernet cable and use as a network printer.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

1410 all-in-one scannoing issue

Similar Messages

Maybe you are looking for