1440x900 resolution missing in Bootcamp (MBPr+Retina)
I just installed Windows 8 RP on my new MacBook Pro with Retina display and realized that the 1440x900 resolution option is completely missing from Windows (and games).
I've tried installed NVIDIA's latest 650M beta drivers (304.79), but they refuse to install. The frustrating thing about this is that 1440x900 is the most natural resolution for many games on the Retina display (since 2880x1800 either runs poorly, or reduces the UI of many games to unreadably small sizes). Intermediary resolutions cause ugly blurry jagged edges due to scaling.
Any ideas?
Games are only installed on Home editions by default, so you have to install them
Games = go to control panel > Programs and Features
Then look on left of list of apps and there is a link 'Turn windows features on and off' click that then in the dialog that comes up tick games then 'ok' then games will be installed.
there are also plenty of games int the store... just click windows/command key then click on blue store icon (top left)
Similar Messages
-
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display?
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display? When I click Get Info, the "Open in Low Resolution" box is marked and locked. How can I unmark this box? I currently run 10.9.1. I can open Adobe Photoshop CS6 in high resolution without any problem. Any advice would be much appreciated. Thanks.
There is no such thing. In CS6 only PS itself is Retina compatible. You would have to use CC for full Retina support.
Mylenium -
Can I use both newly cloned MBPR retina and old-MBP with same Time Machine
When my new-MBPR retina cloned from the old-MBP back up in Time Machine via migration assistance, will this newly-cloned MBPR continue thereon backing up with the same old-MBP back up in Time Machine? I.e. continuing same timeline?
And what happen to my old-MBP back up, if I continuing to use my old-MBP with the same Time Machine on? Will TM recognised 2 different MBP and thus creating 2 back ups? I seem to have problem to keep 2 MBP running with same TM. Programs not responding even force quitting them!
And what should I do to use both? Appreciate your help. Thank you.OK, but in general I can use this one device as both file storage and Time Machine.
I thought that (for some reason) once I set up the Time Capsule to act just as Time Machine storage I would be unable to access it as a plain file storage.
I have just tested it now, and it seems it can work as both - file storage and Time Machine. I can see the Time Machine backup file on it and folders where I can dump regular files.
The only thing I would need to occasionally do is delete some old backups to keep Time Machine segment below 1 TB just so I have plenty of space for regular files.
This thing is awesome. :) -
I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!
lan drivers*
-
Msi gx623 1440x900 resolution on windows 7
Hello, i know that this laptop can run in 1440x900 resolution screen mode
but my windows 7 runs only on 1280x800.
it's quit a little resolution for me, because i work with coreldraw and some images just doesn't fit at full screen.
i know that that this laptop can perform this resolution, as it even written in manual.
looking forward for answer. thank youQuote from: modder on 12-August-10, 11:31:50
Updating the video driver wont help, because the res depends on the monitor driver and that is included in win7. I'm 99.5% sure you have a 1280x800 res screen. You can upgrade the screen, if you're interested I can give you a great link to a guide.
They sell around $100 on ebay.
This is why I want him to look at the box. The GX623 can come with either the WXGA or WXGA+ panel. What it comes with may be due to market and the there is a price difference.
Pwnd,
If the screenshot is from the website where you purchased it and what you got was different, contact the reseller. -
15.4" Screen / 1440x900 Resolution Enough?
Is the 15.4" screen, run on 1440x900 resolution, on the MacBook Pro enough space to run Logic Pro 7 more than comfortably?
That may go up with the next version of Logic, which is rumored to be a completely different window layout.
I know, all speculation at this point... -
Is the resolution on the iPad mini retina better than any other retina?
The 1st gen iPad mini had the same resolution as ipad 2. Becasue the mini is smaller than the 2 the pixels were denser.
So my question is... Is the resolution on the iPad mini retina better or denser than other retina screens found on other devices?
Thanks
LionelTry resetting the iPad (hold the home and power buttons down until the Apple logo appears).
Barry -
Bootcamp with Retina Display model
With my current mac book pro, I use my OSX side for work, and my Windows side for gaming. I am wanting to upgrade to the new retina display model, but I've seen mixed reviews about gaming on the retina display. Are all the drivers neccesary avaialble for games to work properly on the retina display?
Also, does the default retina display run at 1440x900, with just more detail per pixel?
ThanksAn updated version of Bootcamp Assistant is already on your MBPr. - Applications - Utilities - Boot Camp Assistant. It will guide you through the entire process including putting all of the required files to a USB flash drive - you will also need a Windows 7 ISO. Alternately it looks like it can also still burn them to a CD/DVD if you have the external DVD superdrive attached.
Good luck! -
When bootcamping, MBP(Retina 15") does not have wireless capabilities. What do I do?
I used bootcamp with no problems on my iMac (2008), booting into Windows 7 32bit. However, with my recently purchased MBP Retina the wireless card seems to be missing a driver or something, and will not even show when I go to wireless help on windows 7. I installed the Windows 7 64bit.
After installing Windows you must immediately install the drivers provided by BC prior to installing Win. The operations BC does are: 1. create Windows partition; 2. create drivers to be either burnt unto a CD or copied to a USB flash drive; 3. install windows. When Windows is ready, use the product created in step 2, otherwise you will have a lot of problem running Windows, from resolution, to wireless and bluetooth.
-
Problems with FPS while gaming on MBPr Retina
Ok, I have a Macbook Pro Retina 2012. I recently started playing games on it, most seem to be ok but I'm running Windows Via VMware Fuision, it worked great...for a time. I am playing a game, that at times, has a lot of graphic qulaity and a lot going on at one time. I lowered the quilaty but still it seems jumpy like the the GPU cant keep up with the FPS. I and a 1Gb GPU. Is there anything else I can do to stop this and let in play as normal or this a problem with something different than that GPU?? I was looking into external GPUs but that seems WAY too expensive, at the moment until that design one espcailly for it. Just looking for some friendly advice.
Install Windows via BootCamp this allows the game you are playing to use all of the resources the computer has. Using VM Ware your computer has to power both Windows and Mac at the same time. Therefore performs slower. Also the GPU has to power a higher resolution screen (Retina Display) which will lower FPS.
-
Photoshop resolution on Macbook Pro 15" Retina display too small
I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)
If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display
Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?
There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.quaetapo wrote:
Well that certainly helps in terms of making the image larger – only problem is with the low resolution there's a loss of clarity and pixelisation of the image; so not the same level of quality...
In System Preferences/Display, what resolution do you have your screen set to? Try changing that also to see if the two settings can work together. Also, since the vast majority of users (Mac or PC) don't have Retina Displays, isn't what you're seeing with Low Resolution checked in Photoshop closer to what most people will see? Remember that Apple's software, such as Safari, have been upgraded to take full advantage of the rMBP display; most other browsers, especially in Windows, haven't.
And if you want to tinker with the rMBP's resolution even further, check out "Eye-Friendly" in the App Store. -
HOW TO GET THE MACBOOK PRO 13" TO RUN ON THE 1440x900 RESOLUTION
Hey guy, this is not a question bu more of an answer. I have read many forums with people wanting to up there res on the macbook pro from 1280x800 to something higher. i got my 13" MAcbook pro mid 2012 to run on the 1440x900 although its blurry and this is how. Firstly you want to download and instal switchresX. open the app go into last option (colour lcd), go to the custom resolution tab, click the + button on the buttom left, the at the top chage the option to scaled resolution, change the res to horizontal: 1440 and vertical:900. click ok then apply now experimental. reboot your make go into system preferences, display, scaled and select the one you just created. All done .
Your best option would be to sell yours and buy a used, unscratched model. A case replacement by apple is going to cost a small fortune.
-
Mac OS X Lion Problems (Sound, Resolution, Missing Partition, and Crashes)
Ohia everybody! So recently I installed Mac OS X Lion (GM) on my Mac Mini. It's been installed for about 2 weeks, but I quickly noticed a couple of problems with it.
Problem 1 - Screen Resolution:
When I had Snow Leopard installed and I held alt to switch into Windows, the menu that appeared to let you switch partitons resolution was correct. Now it seems to be 800x600. Same thing with the boot screen with the Apple logo. When the actual OS is booted up, the resolution is correct (1600x900). Why is it doing this with Lion and now when I had Snow Leopard?
Problem 2 - Windows Partition:
Before I installed Lion, I had a Windows partition set up using BootCamp. I was able to see the Windows partition on my Macs desktop as well as my Mac partiton. Now it doesn't show up at all, and when I go to Disk Utility, it shows up as BOOTCAMP, and its greyed off. When I click on it and try to mount it, it just said that it couldn't be mounted. Nothing more. I can still boot into it just fine, but I can't view files, which is quite useful when transfering files between the operating systems.
Problem 3 - Speakers Buzzing:
On Snow Leopard, when I went to play a sound, the speakers were completely quiet and the sound came out nicely. Now, the speakers will be quiet, and when I get a notification or something, the speakers will have a quiet buzzing sound and will continue buzzing for a few minutes after the sound is over. When I play another sound, they will start buzzing again. It never used to do this before Lion, so I'm sure its not the speakers. Hopefully someone has any info on this because I'm clueless.
Problem 4 - Safari Crashes:
Last problem! Sometimes on Lion (not on Snow Leopard), if I leave Safari open for a little bit, it will randomly crash. It usually doesn't do it while I'm browsing, but if I'm uploading pictures or videos and I just leave it open, I will come back to my computer and it will say safari crashed.
Note:
I always keep my computer up to date, and have googled all of these problems before with no help. Hopefully someone get help me fix any of these problems.So I am not the only one with this issue. The sound of my imac g5 sounds buzzing as well. I am hoping for a fix from Apple soon.
-
CS6 resolution on Mac Book Pro Retina Display
The resolution for all CS6 programs on mac book pro retina is horrific. Will there be updates?! I am quite frustrated that I can barely see any of my type in Indesign.
InDesign has yet not came up with the retina display support update but yes we are going to have the support of retina display for most of the products eventually.
http://blogs.adobe.com/creativelayer/new-macbook-pro-retina-display-support/
http://blogs.adobe.com/jnack/2012/08/photoshop-cs6-13-0-1-available-update-on-retina-plans .html -
Cannot use 1440x900 resolution with fglrx no matter what I do
I have used hwd and got a configured xorg.conf and I added "1440x900" to the modes list but it does not work. I have even copied over my working xorg.conf from ubuntu and sabayon and it works for every resolution EXCEPT 1440x900. I seems like everything think I do to add 1440x900 it just ignores it. The xorg.conf below is from hwd and I added the "1440x900" but in GNOME I can only use 1024x768 , 800x600 and 640x480. What am I doing wrong?
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 30 - 70 # Warning: This may fry old Monitors
VertRefresh 50 - 160 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by jae1227 (2007-08-13 02:14:47)MrWeatherbee wrote:
If you are having issues with an ATI card as your xorg.conf shows (you also mentioned nvidia, so I'm covering my butt), you may want to see my posts and others in this thread:
http://bbs.archlinux.org/viewtopic.php?id=35753
Basically, it discusses that sync, refresh, and modes / modelines don't work very well with "fglrx" driver, at least in my experience. The simplest xorg.conf lines relative to your video card and monitor sections will likely work best. I had similar issues (and more) with trying to include very specific xorg.conf code for those sections, and I had to resort to leaving it close to the bare-bones setup created by aticong --initial to get everything to work properly.
I'm back to the radeon driver (for aiglx) now, so I can't do any testing for you. But hopefully the above info let's you know others have had similar issues.
I tried to do what you said. I ran xorgconfig again and then ran aticonfig --initial. I started up GDM and it did not work, well something worked but my monior said it could not display it. Now my guess is that it could have worked but the resolution was set too high on GDM and my monitor could not handal it. So I added the HorizSync & VertRefresh. Now I have used the HorizSync & VertRefresh in Ubuntu and Sabayon with fglrx and it works great. I have another computer with an Nvidia card that runs Arch and it works great on this monitor at 1440*900. When I start GDM it picks its own resolutions regradless of what I have in the Modes section. As of now I can display:
1920x1200
1920x1080
1600x1200
1280x1024
1280x720
1152x864
1024x768
800x600
640x480
Here is my xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# unsupported card
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "ATI"
Driver "ati"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "ATI"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
And here is my Xorg.0.log:
[code]X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux AMD 2.6.22-ARCH #1 SMP PREEMPT Thu Aug 2 18:27:37 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 11 14:30:12 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,8141 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,710a card 17af,0b12 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,712a card 17af,0b13 rev 00 class 03,80,00 hdr 00
(II) PCI: 05:08:0: chip 1102,0007 card 1102,100a rev 00 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x00009fff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd1ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc R520 [Radeon X1800] rev 0, Mem @ 0xc0000000/28, 0xd1000000/16, I/O @ 0x9000/8, BIOS @ 0xd0000000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x712a) rev 0, Mem @ 0xd1010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[2] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[3] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[4] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[5] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[6] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[9] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[10] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[11] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[12] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[13] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[14] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[16] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[17] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[18] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[19] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[21] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[22] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[23] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[24] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[2] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[3] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[4] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[5] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[6] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[9] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[10] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[11] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[12] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[13] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[14] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[16] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[17] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[18] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[19] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[21] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[22] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[23] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[24] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[6] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[8] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[9] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[10] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[16] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[17] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[18] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[19] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[20] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[21] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[22] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[23] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[24] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[25] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[26] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[28] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[29] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[31] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.39.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.39.4
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.393.1
(II) ATI Proprietary Linux Driver Build Date: Jul 20 2007 13:50:07
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x710A) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[6] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[8] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[9] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[10] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[16] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[17] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[18] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[19] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[20] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[21] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[22] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[23] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[24] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[25] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[26] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[28] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[29] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[31] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e72b8
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[6] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[8] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[9] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[10] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[19] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[20] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[21] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[22] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[23] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[24] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[25] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[26] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[27] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[28] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[29] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[33] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[34] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "Radeon X1800 Series" (Chipset = 0x710a)
(--) fglrx(0): (PciSubVendor = 0x17af, PciSubDevice = 0x0b12)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xd1000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R520
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.39.4
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 225 Serial#: 1212231993
(II) fglrx(0): Year: 2006 Week: 42
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate Composite SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 41 vert.: 26
(II) fglrx(0): Gamma: 2.35
(II) fglrx(0): DPMS capabilities: StandBy; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.636 redY: 0.349 greenX: 0.290 greenY: 0.589
(II) fglrx(0): blueX: 0.143 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 106.5 MHz Image Size: 410 x 257 mm
(II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HVELA46878
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2d250239314148
(II) fglrx(0): 2a1001030e291a878ad7a5a2594a9624
(II) fglrx(0): 145054bfef809500950f81808140714f
(II) fglrx(0): 0101010101019a29a0d0518422305098
(II) fglrx(0): 36009a011100001c000000fd00384b1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 004856454c4134363837380a20200091
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 520/495MHz @ 0Hz [enable load balancing]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 38 modes found for primary display.
(--) fglrx(0): Virtual size is 1920x1200 (pitch 0)
(**) fglrx(0): *Mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 +hsync
(**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080" 172.79 1920 2040 2248 2576 1080 1081 1084 1118 +hsync
(**) fglrx(0): Default mode "1920x1080": 81.6 MHz (scaled from 0.0 MHz), 33.6 kHz, 30.0 Hz (I)
(II) fglrx(0): Modeline "1920x1080" 81.64 1920 1984 2176 2432 1080 1081 1084 1119 interlace +hsync
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (410, 260) mm
(--) fglrx(0): DPI set to (118, 117)
(--) fglrx(0): Virtual size is 1920x1200 (pitch 1920)
(**) fglrx(0): *Mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 +hsync
(**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080" 172.79 1920 2040 2248 2576 1080 1081 1084 1118 +hsync
(**) fglrx(0): Default mode "1920x1080": 81.6 MHz (scaled from 0.0 MHz), 33.6 kHz, 30.0 Hz (I)
(II) fglrx(0): Modeline "1920x1080" 81.64 1920 1984 2176 2432 1080 1081 1084 1119 interlace +hsync
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(II) fglrx(0): [pcie] 126976 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd1000000 - 0xd100ffff (0x10000) MX[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[7] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[8] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[10] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[11] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[12] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[18] 0 0 0x00009000 - 0x000090ff (0x100) IX[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[22] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[23] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[24] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[25] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[26] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[27] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[28] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[29] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[30] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[31] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[32] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[34] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[35] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[36] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[37] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading sub module "glx"
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
Maybe you are looking for
-
hi i have some idea about setwhereClause() method ..... but in my case i want to use one SQL query (select * from tab )...i dont know how to use .... (without view object we cant use setwhereclause() method thatsy i have to use sql statement in manag
-
So i tried factory reseting, rebooting, everything. it didnt work, i gave up and went back to it 10 minutes later to find it working, it lasted a day without restarting, although charging it all night the battery stayed at 54% for the whole day not g
-
Time on iPad is off. How do I fix?
Location services are ON. but time zone still won't set.
-
Error Scenarios in Database Reorganization
I need to know what error scenarios may and will occur upon running Database Reorganization. For instance, the db reorg activity was halted in the middle. Some errors like that or something. Kindly provide error scenarios or worst case scenarios or a
-
Error occured: Error in Source. No Message Available
Hello all, This is a problem I encountered when migrating a page from ep5 to ep6 (sp9). The page consists of 2 iViews: 1. An iView for inserting search details. 2. An iView for displaying results. The two iViews communicate using EPCF script methods.