1487 error after moving ws object

Hello,
I'm recieving the 1487 error when trying to remote control a WS after
moving the WS object to a different container.
I've search through many posts with the same problem but nobody seems to
post a solution. Here is what I'm doing...
1. login and the WS is succesfully imported, I can then remote control it
succesfully.
2. Move the WS object to a new container.
3. Reboot the WS, now I get the 1487 error.
At this point I can see that the registry is not updated on the workstion
with it's new location.
HKLM>SOFTWARE>NOVELL>Workstation Manager>Identification>Workstation Object.
4. The workstation then re-imports itself to it's original container
defined in the import policy.
5. Now I'm unable to RC either the moved or the new WS object.
6. If I delete both the moved and new objects, reboot. It will then
re-import and can now be remote controlled again.
I'm suspecting a possible problem with the search policy. I have tried
different variations of the search policy placement and configuration but
none seem to get me any better results (mostly worse). I'm not exactly
sure how the search policy should be configured if it even is the problem.
Any help would be apreciated, thank you.
I'm running Zen7 sp1 w/ hotpatch 6.
I have nwclient 4.91sp3
I have reinstalled the zfdagent.
I have removed nmas.
I tried 4.91sp4 client, same issue.
I have enabled debug logging on the WS and Server, can't seem to find any
errors.

Jason wrote:
> Hello,
>
> I'm recieving the 1487 error when trying to remote control a WS after
> moving the WS object to a different container.
>
> I've search through many posts with the same problem but nobody seems to
> post a solution. Here is what I'm doing...
>
> 1. login and the WS is succesfully imported, I can then remote control
> it succesfully.
> 2. Move the WS object to a new container.
> 3. Reboot the WS, now I get the 1487 error.
>
> At this point I can see that the registry is not updated on the
> workstion with it's new location.
> HKLM>SOFTWARE>NOVELL>Workstation Manager>Identification>Workstation Object.
>
> 4. The workstation then re-imports itself to it's original container
> defined in the import policy.
> 5. Now I'm unable to RC either the moved or the new WS object.
> 6. If I delete both the moved and new objects, reboot. It will then
> re-import and can now be remote controlled again.
>
> I'm suspecting a possible problem with the search policy. I have tried
> different variations of the search policy placement and configuration
> but none seem to get me any better results (mostly worse). I'm not
> exactly sure how the search policy should be configured if it even is
> the problem.
>
> Any help would be apreciated, thank you.
>
> I'm running Zen7 sp1 w/ hotpatch 6.
> I have nwclient 4.91sp3 I have reinstalled the zfdagent.
> I have removed nmas.
> I tried 4.91sp4 client, same issue.
> I have enabled debug logging on the WS and Server, can't seem to find
> any errors.
>
>
What version of ZDM 7 are you running? This is usually a snapin issue
with consoleone. Where are you running ConsoleOne from?
---Kurt

Similar Messages

  • Illustrator crashes after moving an object

    On the first day everything was working fine, but now I have a problem moving an object. Every time I am moving an object with the cursor the illustrator crashes. HELP!!!!
    (a friend told me it's graphic card problem, but still I can't find what causes the problem)

    sokiN,
    The issue seems to be caused by the Chrome Pushbullet extension, see this post #3 by Matt with the solution:
    https://forums.adobe.com/message/6984777#6984777

  • Oracle TNS 12535 error after moving repository DB from Win NT to Win 2K

    Business Objects 5.1
    We have recently moved an Oracle database from Windows NT to Windows 2000. One particular user keeps on getting ORA-12535: TNS: operation timed out.
    What could be causing this?
    The user can run SQL*Plus and connect to the database without any problems.
    The user gets this error when running BO itself. When running our Application or any other Oracle tool or utility (TOAD, SQL*Plus), etc, then all works fine.
    From my own PC I can use the 'problem' users BO login to connect to the repository.
    So the nature of the problem suggests a network or configuration issue of some kind. We have limited BO expertise at this site.
    Please can someone advise?
    regards,
    MK

    Hi Mo,
    If the previous solution provided doesnu2019t works then check the following things:
    1. Check the ORACLE_HOME value in the Registry and ensure that your PC has only one "ociw32.dll" file.
    2. Confirm that the PATH environment variable definition's first Oracle /bin folder path points to the middleware
        installation you intend Supervisor to use.
    3. Add the repository database server's IP address to the local HOSTS file.
    4. Confirm the repository database's entry in the Oracle TNSNames.ora file.
    Regards,
    Sarbhjeet Kaur

  • Error after moving user to another organiz.l unit (Edir)

    I am moving users to another org. units.
    For 2 users, i keeep seeing the following error in /var/log/datasync/connectors/default.pipeline1.mobility-AppInterface.log:
    ERROR [Device_Thread-29] [sync:252] [userID:cn=**,ou=**,o=**] [eventID:] [objectID:] [Sync] Fatal - unable to find folder object for folderId = 2
    Any idea?

    If you are moving users around OUs/Orgs then you will need to remove them from the connector, wait for them to vanish, move user in eDirectory, re-add to connector. As far as I'm aware this is a limitation in all Datasync connectors that link to eDirectory.

  • Help with C03 error after moving!

    I need some advice and help in what to do with my BT Vision. 
    I moved home about 1 week and a half ago and moved all my BT services to the new address. The new phone number is working fine and the broadband is now also working well, with no problems. However my BT Vision box doesn't work at all. When turned on it shows a C03 Error and says I need to wait for the activation date? Not sure what this means as I thought that as soon as broadband was working Vision would work.
    At the weekend I called the helpline and the operator told me (after periods of long waits and apologies) that vision had been transfered to new line and he had to "escalate" the query as he was unable to resolve. Someone was supposed to call me in 24hr but no one did. I rebooted the hub and the box countless time already and same message appears.
    I've been with BT for some years now and always have good service when things are set so keen to resolve this so I can keep on enjoying it. My partner is talking about getting Sky but I'm not so sure.
    I have a old grey BT Vision Box and the black Hub, if that info helps!! Thank you for any help and advice you can give. Not sure what I can do more.

    Hello,
    Your account hasnt been activated and QoS wont have been applied to your line.
    Only thing you can do is send the mods and email:- http://bt.custhelp.com/app/contact_email/c/4951
    Make sure you include your account number, name, address and details of the problem. They'll get it sorted in around 1 week and credit you for lost service.

  • Error after moved jxl.jar library

    Dear All,
    I've a requirement to import data to db table from excel file. I followed the below link
    https://blogs.oracle.com/prajkumar/entry/importing_data_from_excel_sheet
    I moved all the class and xml files and registered in apss (OAFramework version 12.1.1).
    My page is working fine in local but after deployed to the server i got the following error if i click the go button.
    Error
    oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.classloader.util.AnnotatedNoClassDefFoundError, msg= Missing class: jxl.Workbook Dependent class: xxerp.oracle.apps.xxerp.uploadso.server.SaleOrderUploadAMImpl Loader: oacore.root:0.0.0 Code-Source: /d02/oracle/VIS/apps/apps_st/comn/java/classes/ Configuration: <library> in /d02/oracle/VIS/apps/apps_st/comn/webapps/oacore/ The missing class is not available from any code-source or loader in the system.;
    I added the below in orion-applications.xml
    <library path="/d02/oracle/VIS/apps/apps_st/comn/java/classes/xxerp/libraries/library_so_upload/jxl.jar" />
    Thanks in advance,
    SAN

    Hi all,
    After lot of googling, I found a metalink having solution for this.
    Metalink ID 433241.1
    After followed this doc my prob has been resolved.
    Thanks,
    SAN

  • Transport Error while moving BI objects to quality

    Hi All,
    I have the followinng landscape.
    Source system :- Dev ECC 100(config) and Dev ECC 200 (data is present here).
    Since for my BI implementation, I need data. I have created requests i.e for activating datasources in Dev ECC100 and then copied them into Dev ECC200.
    Dev BI is connected to Dev ECC200, replicate the datasources and do my development.
    Now I have created request in Dev BI for my BI objects.
    *The question is when I have to transport it to Quality. What source system assignment I maintain in Quality Box ? *
    So far, Quality ECC-100 and Quality BI-100 are connected.
    Also I am maintaining Dev ECC 100 -> Qua ECC 100
                                     Dev BI 100 -> Qua BI 100.
    I have alreday transported request from Dev ECC100 to Qua ECC100.
    While transporting BI requests for datasources, I get the error : source system unknown Dev ECC 200.
    Please respond.
    -Amit

    Hi,
    I have resolved ths issue.
    Actually in Quality BI, logical source system assignmement, I should have used
    Source                                                       -->               Target
    DEV ECC200 (instead of Dev ECC 100)     -- >                 QUA ECC 100.
    Thanks,
    -Amit
    Edited by: Amit Dhasmana on May 5, 2009 2:05 PM

  • RFC Lookup error after moving to Quality from Development

    Hi All,
    For a scenario,I am using the RFC Lookup in message mapping.
    I am not using it in a UDF but for directly for an target element....
    The scenario was wrkng properly in development... but in quality it's not wrkng giving the following error....
    RuntimeException during appliction Java mapping com/sap/xi/tf/_ABC_DEF_GHI_JKL_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter ISU_RFC_Receiver does not exist. at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:148) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:620) at
    The design part and Config part are done properly..
    1.Message mapping-->Parameters (given the CC Name)
    2.Operation mapping-->Binding (The binding parameters is specified)
    3.In the interface determination.... choosen the Parameter for Operation mapping...
    But still i am getting the above error..
    Did any1 face the same prblm ever??? If yes may i know how u resolved???
    Any inputs or suggestions is appreciated...
    Babu

    HI Michal,
    I checked it thtz fine the same objects are transported to Quality without any modification...
    But Still i am getting the same proble..
    Any other inputs????
    Babu
    Edited by: hlbabu123 on Apr 8, 2010 7:54 PM

  • BO6.5 ORB error after moving server to new location

    Post Author: seetr
    CA Forum: Older Products
    Our server was forklifted to a new location within our network, so the IP address changed but everything else remains the same.  Now we are unable to restart the BO server.  We found a location in the Configuration Tools > ORB setting where the IP was hardcoded.  We were able to change the IP after stopping all BO services running on the server, but we could not complete the setting change as we keep getting the following error - "Configuration script cannot be started (Error: CFT 06002)".  Any ideas?  Thanks!

    Hi,
    What steps did you perform in the Configuration Tools to update the IP address?  Can you provide details?
    You may have to Update the ORB or completely recreate it. 
    Note that if you recreate the ORB, you need to backup your Storage folder.
    But before proceeding with the above, please check the following note:
    1182500 - Error: "Configuration script cannot be started(Error: CFT 06002)" when customer trying to update the ORB
    Symptom
    When trying to update the ORB the following error message appears: "Configuration script cannot be started(Error: CFT 06002)" You are then unable to ping the IP address for a server name.
    Cause
    The "C:/Winnt" or "Windows/System32" value is missing for the System variable PATH.
    Resolution
    Perform the following steps:
    - Add C:/Winnt or Windows/System32 to the System variable PATH.
    - Reboot the server.
    - Update the ORB.
    Hope this help.
    Regards,
    Jeff

  • Errors after moving databases in SCOM 2012

    I have recently moved both the Operational DB and the DataWarehouse DB from the original server to a SQL cluster. Following the guides below worked and SCOM is up and running, at least some sort of success. The problem is that it seems SCOM is trying to
    contact the Operational DB on the original server even after the move.
    The only events showing up in the log after the moving is 29112 and 21023
    29112
    OpsMgr Management Configuration Service failed to execute bootstrap work item 'ConfigurationStoreInitializeWorkItem' due to the following exception
    System.Data.SqlClient.SqlException (0x80131904): Cannot open database "OperationsManager" requested by the login. The login failed.
    Login failed for user 'DOMAIN\Action Account'.
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.ConnectionManagementOperation.Execute()
       at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAccessOperation.ExecuteSynchronously(Int32 timeoutSeconds, WaitHandle stopWaitHandle)
       at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.ExecuteOperationSynchronously(IDataAccessConnectedOperation operation, String operationName)
       at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.Initialize()
       at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.ConfigurationStoreInitializeWorkItem.ExecuteWorkItem()
       at Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.ConfigServiceEngineWorkItem.Execute()
    21023
    OpsMgr has no configuration for management group SCOMVIRIDIS and is requesting new configuration from the Configuration Service.
    Anyone who has seen this issue before? The guides were easy to follow and i can see som 31554 and similar events after restarting the Services but soon it goes back to just logging 29112 and 21023 in the event log.
    The links that i followed is listed below;
    Operational Database: http://technet.microsoft.com/en-us/library/hh278848.aspx
    DataWarehouse Database: http://technet.microsoft.com/en-us/library/hh268492.aspx
    I´m greatful for any help!
    Thanks,
    Daniel
    IT Consultant at Viridis IT

    Problem solved.
    I have been in contact with MS Support who solved the issue. What was wrong?
    It seems the documentation misses an important piece. In http://technet.microsoft.com/en-us/library/hh278848.aspx under 7. there is one more value that should be edited. Under the category named "ConfigStore", make sure the "ServerName" is pointing
    at the new SQL Server, otherwise the MS wont be able to receive configuration from the Operational DB.
    I think the documentation will be updated with this information but I want to share this if anyone else faces the same issue.
    /Daniel
    IT Consultant at Viridis IT
    Thx Daniel, 
    I had the exact same issue.
    In addition to what you have suggested I also had to make sure that the new SQL server is registered with only its name - without the Instance name.
    I have installed the new instance on the default MSSQLSERVER on the new SQL server.
    I have documented all the procedure in my blog - including the changes you have suggested, if someone needs it its here:
    Move SCOM 2012 Database to another server
    yuryk

  • Error when moving an object around the art board (Video)

    So I have a grouped object which I was about to move into place when I started getting this odd error, including a error message.
    Here is a video of the issue: http://youtu.be/8o1E_oF5D0I
    Error message: Can't move the objects. The requested transformation would make some objects fall completely off the drawing area.
    Started to notice these issues when I recently updated my Illustrator.
    System: Windows 7 Pro
    Latest Adobe Illustrator as of January 2014

    TDRonline,
    Some of the common reasons are Guides and stray points or whatever hidden (far) away on the Workspace

  • D101 Error after moving a GW Resource

    Hi, I've seen a few posts on D101 errors, but none seem to fit my circumstances. I have a resource "Dept Calendar" owned by USERA on POA. Everything works fine. Other users can proxy to the calendar with no problems - everyone is happy. USERA then leaves the department. I moved the resource to POB and give ownership to USERB (who previously had r/w proxy access). USERA is removed from the proxy list. Now, whenever USERB opens an appointment that USERA had entered, she gets a "D101" error with the calendar appointment referencing POA. The D101 makes sense, sort of, because the resource is no longer on POA. But why?
    Our GW is 7.0.4 on both server and clients. I ran an analyze/fix on the resource but it came back with no errors.
    This is a new one for me. Any ideas?
    Thanks,
    Jeff

    JeffreyESmith,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Time Machine Error after moving disk to Airport Extreme

    I have been using Time machine with a 1 TB, WD MyBook hard drive for the past 2 weeks with no problem. The drive had been connected directly to my Macbook Pro, via the Firewire 800 cable.
    Today, I moved the drive and connected it via USB to my Airport Extreme Base Station version 7.3.1.
    When Time Machine tried to create the next scheduled backup, I got the following error:
    *Time Machine Error*
    "This backup is too large for the backup volume. The backup requires 159.8 GB but only 159.1 GB are available.
    To select a larger volume, or make the backup smaller by excluding files, open System Preferences and choose Time Machine"
    It seems to me that Time machine is trying to do a brand new backup instead of the incremental one its supposed to do.
    How can I fix this and have TM recognize that there is already a backup sequence in the disk?
    Thanks for your help.

    Time Machine uses a different method for creating its archive, depending on how the backup disk is connected. When using a directly connected drive, it uses a time-stamped folder structure. When using a networked disk, it uses a sparse disk image format. Therefore, when you connected that drive to the base station, Time Machine was trying to create a new sparse image archive with the leftover space. It did not find enough space, since your direct connect Time Machine archive was taking up too much space already.
    If you want to use it over the network, you'll have to erase the drive and start over with Time Machine.

  • PLS-00201 error after moving a package to a new scheme

    hi
    I've moved a package to a new schema and all the packages in the original schema that reference the moved package now fail to compile. The moved package has had a public synonym created and the execute privileges assigned to the original schema by role. what am i missing? Using 11gR2 version 11.2.0.3.0

    Privileges granted through roles do not apply to stored procedures and packages that are compiled with definer rights (the default).  You need to grant the original schema execute privileges on the new schema's package directly.
    John

  • Missing Media error after moving project from MacBook to iMac

    I can see the project in iMovie fine, and the audio track information bars are still showing in the editing window, but the background music track is now called "output" instead of the song name, even though I added that song to the iTunes library. That isn't a big deal, but when it comes to the Voiceover tracks it is a huge pain because I'll lose all the lipsyncing I have done. (When doing outdoor interviews, in order to defeat wind noise I use lavalier mics and digital recorders to produce separate wav files for the questions and answers.) Any ideas how to relink the tracks?

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion for the first time or to switch between multiple domain files  Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

Maybe you are looking for