15.0.0.152 , Chrome and windows 8.1, not possible to pre-buffer

I recently started experiencing issues with watching streams online.
I have a wireless connection for my laptop, and i normally have to pause the stream for a couple of minutes to let it buffer a little of the video before i start watching anything.
The issue is that when i click 'Play' (after it has buffered for a couple of minutes), it somehow just 'removed' everything i have buffered.. so, instead of having video pre-buffered when i watching, it will start all over from the beginning again. So basically this gives me 0 option to actually watch a whole video without lag/loading.
This was not an issue just a couple of days ago, but i believe chrome/flash did an update the last couple of days. 
This is not an issue on youtube etc, but twitch / other free-stream-websites are not working at all.
What could be the reason for this? It looks like it downloads/buffers everything fine, and it is just when i click 'play' that it all disappears (i can even see it on the bar..)
Because of this i tried to reinstall Adobe Flash... but apparently this is impossible to uninstall windows 8? at least i was not able to uninstall it with the guides out on your webpage.
If anyone could advise how to properly uninstall Flash, i could try to install an older version, as i am pretty much certain that the recent update is the reason for this issue
regards,
Superbia

Hello Kermit_70,
What is your current situation?
Please try the suggestion as aw00t mentioned.
Additionally, please try to use Automatic Repair to fix problems that keep Windows from loading.
For more information, please take a look at the following article.
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-windows-8-a.html
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

    I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
    <Personal Information Edited by Host>

    لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة  والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

  • ITunes and Windows 8 Home Sharing (Possible Fix)

    If this fix has been posted elsewhere then I apologize, but I wanted to share what I stumbled on as a possible for for iTunes Home Sharing and Windows 8. I did a lot of port forwarding, both on my router and my Norton firewall, but nothing seemed to help. After a few minutes my Apple TV and iOS devices would stop seeing my iTunes library. The only way to fix it was to reboot the router.
    On a whim I looked in my Device Manager and found under Network Adapters a device called Microsoft Kernel Debug Network Adapter. I disabled this, rebooted my computer, and have since no issues with Home Sharing. It's only been a few hours, but that is the longest I've gone since installing Windows 8. I'll look in the morning to see if it still works.
    So give this method a try and see what happens. Hopefully it will fix your problems.

    Here are the three steps I took to get Home Sharing working successfully on Apple TV. This has worked for the better part of a week so hopefully it will work well for others.
    In your software firewall create two new Inbound Rules. Open port 3689 (TCP) and port 5353 (UDP) to All Programs.
    If your hard drive goes to sleep after a certain period, be sure to change to something greater than 30 min. (Control Panel -> Power Options -> Change Plan Settings -> Change Advanced Power Settings -> Hard disk -> Turn off hard disk after -> Setting)
    On your Apple TV change when it goes to sleep. I changed mine to 10 hours.
    This seems to keep the connection alive. On occassion it will look like it gets stuck loading, but just let it go. At some point it wil kick on. If you generates a connection error just try loading the media again and it should start.

  • HELP - Remote Desktop and Windows? Is it possible? I need your thoughts...

    I am currently trying to set up a connection between my MacBook and my Windows XP PC. I have Leopard 10.5.3 and Windows XP. I want to set up the connection to my PC so I can use my Remote Desktop to control/observe/receive files from my PC to my MacBook. So far its been going well, I was searching on Google for some answers, and I read something about VNC Viewer and Remote Desktop. I am not sure how this works but I just want Remote Desktop to work with my PC. So I was just wondering if anyone here can help me out, or if anyone here has any suggestions/ideas. Thanks.

    You've probably figured this out by now, but you can't use Remote Desktop with XP Home. It only works with XP Pro. As a free alternative, you should be able to run a VNC server on the XP machine, and a VNC client on the Mac, and access that way. A brief decription can be found here: http://lifehacker.com/software/feature/geek-to-live--how-to-control-your-home-co mputer-from-anywhere-125607.php (Ignore the parts about opening ports on your router to the internet--this is best used only on local network, unless you get more complicated.) If you do want access over the net, perhaps its better to go with a commercial service such as pcAnywhere or GoToMyPC is an easier route.

  • Safari in both MacOS 10.6.8 and Windows 7 will not open PowerPoint SlideShows but Firefox Will

    Having Created a PowerPoint Slide Show I find that it cannot be shown with Safari neither in Mac nor Windows 7.
    The error message in Windows 7 is: "WebKitErrorDomain error 102"
    The error message in Mac OS 10.6.8 is "Frame Load Interrupted."
    The exact same Slide Show is easily shown with Firefox 28.0 in the Mac and Firefox 27.0.1 in Windows 7

    To start with, my computer is the late 2008 model Imac, has 3g of memory …
    I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
    I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
    I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
    Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
    I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
    What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
    No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

  • HELP!!  Photoshop cs4 and Windows 8 - Printer Not Found

    Just installed PS cs4 on my new all-in-one with Windoz 8 and my cs4 is saying that there is no printer installed.  I can print from other sources like disks and picture viewer.  Are there any fixes for this???  I REALLY don't want to purchase yet another license for cs6!

    If you search Google using the terms "CS4 and Windows 8 compatibility" you can probably find various results from both Adobe and Microsoft that should give you some idea of how much of a gamble you might face in changing your OS.
    In my own experience, a change in OS has yet to be a positive experience... while most people loved XP in its day, I suffered years of poor performance with it as an upgrade from the moment it was installed and regretted doing it.  Maybe you've had better experience and aren't as shy of it as I am.

  • SAP and WINDOWS NT folders not there in Authentication  under CMC

    Hello All,
    I recently installed BOJ Enterprise 3.1 SP3 and also installed Integration kit 3.1 SP3 in Linux_x86.  In the initial logon screen i can see the SAP and WINDOWS NT in the drop down in the Authentication. But after selecting the Enterprise option to login CMS  I selected Authentication to configure the BW Backend system but i cannot see SAP folder or Windows NT option. I cn only see Enterprise and LDAP option those are by default comes along with BOJ Enterprise 3.1.
    Can anyone tell me why Iu2019m not able to see SAP and Windows NT in the CMS HOME --> Authentication
    I'm able to publish BW but RFC also failing after creating using PROGRAM ID.
    Any suggestions are appreciated
    Thank you,
    Vijay Reddy

    When the CMS is on unix/linux the NT and Ad plugin are not loaded, it seems some sort of mistake that the dropdown appears for either of them.
    On the SAP side if you don't see the plugin it indicates the integration kit or jco arenot installed properly/completely. That should work on either platform.
    Regards,
    Tim

  • Upgrade to lion and windows 7 is not starting

    I upgraded to lion and for the first time tried to run windows 7 since the upgrade and it does not work.  It worked fine before but I'm not totally sure this is the cause of the issue.  I have tried to restart windows half a dozen times but cannot get it to boot correctly.  Working in the safemode isn't allowing me to boot from the windows disc to try and trouble shoot.  I don't want to reinstall 7 if possible.  Thanks for the help.

    Hi,
    Yes, I agree with Rick, something important must be broken during the process of installing the cloning program which causes the failure of all repair options, before the final option of reinstalling your system, refer to this link,
    TrueCrypt Rescue Disk
    http://www.truecrypt.org/docs/rescue-disk
    when preparing the encryption of a system partition/drive, it should create a TrueCrypt Rescue Disk, which can be helpful when your
    Windows is damaged and cannot start.
    See this part:
    If Windows is damaged and cannot start, the TrueCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select
    Repair Options > Permanently decrypt system partition/drive. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.
    Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: Boot another operating system, run TrueCrypt, click
    Select Device, select the affected system partition, select System >
    Mount Without Pre-Boot Authentication, enter your pre-boot-authentication password and click
    OK. The partition will be mounted as a regular TrueCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, as usual).
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Regards
    Yolanda
    TechNet Community Support

  • Fullscreen Window for swiping - Not possible with Adobe Photoshop and others

    Hello,
    i dont know why but it´s no more possible since Yosemite to have a fullscreen window with all apps, so that i can swipe between this windows. Any idea how to fix that? Or is Yosemite really such a degradation?
    PS: Yes, i used the search before and checked that i can also use option key to have other option, but that is not possible for some applications like:
    Adobe Dreamweaver CS6
    Photoshop CS6
    Transmit (FTP Application)
    etc.

    John Mc Guirk
    Do you not want Premiere Pro models for Premiere Elements issues. There are more than enough Premiere Elements documents on its DV HDV data capture firewire into its Capture window.
    http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html
    When dealing with Premiere Elements questions, you need Premiere Elements answers. At another time, I can cite you some cases to prove the point.
    Just a note. We are not Adobe here. Rather user to user. If none of us can provide you with the answer that you seek, then you might want to take the matter to Adobe via its Adobe Chat while Premiere Elements 12 is still the current version. It probably will not be in a few weeks.
    Please do not duplicate your thread topic since duplicate threads can be confusing to you as well as those trying to respond rather than to attract attention to your question. We are all visitors here, not Adobe Chat or Staff.
    If you decide to get input from Adobe Chat, consider
    Contact Customer Care
    The link has been set for
    Premiere Elements
    Adobe ID, Signing In
    Adobe ID, Sign In, and Account Information
    Chat Panel
    If the link set does not hold, then you will need to navigate to the Adobe Chat Panel using the above titles as guides.
    I have selected those titles since it does have an active Chat Panel at this time. It is hoped that the representative that you reach
    will help you or transfer you to Adobe Tech who can. For some time now alternative guides have not worked. That is why I am using
    the given route.
    Please review and consider and let us know the outcome.
    Thank you.
    ATR

  • Chrome and Firefox plug-ins not installed with latest version of Reader

    I'm running OS X 10.7.2 and just installed the latest version of Acrobat Reader and would like to use the plug-ins it is supposed to come with to view PDFs in Chrome and Firefox. However, the version of Reader that I downloaded (10.1.1) doesn't seem to include the plug-ins. A few additional pieces of information:
    1) Acrobat Reader > Contents > Plug-ins contains NO files.
    2) In Reader, the Preferences > Internet > "Display PDF in browser" box is checked.
    3) In Chrome, Acrobat Reader is not listed on chrome://plugins
    4) In Firefox, Acrobat Reader is not include in the list of Plug-Ins
    I already rebooted my computer, and also deleted and re-installed Adobe Reader. Now at a loss for what to do next. Any assistance would be greatly appreciated!!
    Best,
    Chelsea

    Acrobat Help | Display PDF in browser | Acrobat, Reader XI

  • After login to the e-bank on line of the Eurobank EFG in Serbia error message: "Keyboard Navigation Disabled." appear and furthur work is not possible.

    This problem started about 10-20 days ago.
    After login to the e-bank on line service of the Eurobank EFG Serbia further work is not possible because the screen became gray and an error message appear: Keyboard Navigation Disabled.
    I run the laptop on Win 7 Professional - 64 bit Service Pack 1.
    My default web browser is Mozilla Firefox 21.0.
    Alternative is:
    - Internet Explorer 10
    Version: 10.0.9200.16576
    Update Versions: 10.0.5 (KB2829530)
    I have scanned my laptop and cleaned few fond viruses. Have uninstalled and installed again Java so now I have:
    - Java 7 Update 21
    - Java 7 Update 21 (64-bit)
    I have uninstall and reinstall Firefox.
    Result is that now I can run e-bank online in IE but not in Firefox.
    Customer support service from the bank told me that the problem is related to the browser...

    Problem still exist - looking for a solution.
    You may see how this appears on the screen at the attached picture.

  • I have numerous music movie clips that I have not purchased through iTunes, can I stream these "home" movies to apple TV? And if this is not possible, is there another complete program available that I can purchase to have my music movie clips stream to a

    I have numerous music movie clips that I have not purchased through iTunes, Is it possible to stream these "home" movies using iTunes to apple TV?
    And if iTunes will not allow it, is there another complete program available that I can purchase to have my music movie clips stream to a TV and/or another computer?
    Any help would be appreciated. Thanks

    Thanks, Winston C, I've actually tried everything you suggested. I'm thinking now that the Home Sharing problem likely is related to Bonjour--I've seen several people mention this with similar (but not identical) problems. The solution that seems to work for some people is to uninstall and reinstall Bonjour. Frankly, I don't want to go through the trouble given that the iOS 7 release is imminent.
    One thing that I haven't tried is resetting the ATV to factory settings. I'll give that whirl.
    Thanks for your advice!

  • Shipping in shipping point from plant and storage location is not possible

    Dear Experts,
    i am trying to configure STO with delivery scenario in my company
    after creating PO (sto UB) and delivery through vl10b when i try to do picking in vl02n and when i enter storage location its giving error
    "shipping in shipping pointxx from plant xxxxand storage location xxxx is not possible"
    i ve checked all settings
    1.plant and sh point assignment
    2. ovl2 sh point determination
    3.ovl3 picking location determination
    4 all master data cust n mat for loading group and shipping cond
    not able to find any solutions plz help
    Regards
    Supriya

    Check your entries in following options in SPRO path:
    IMG - MM - Purchasing - Purchase Order - Set Up Stock Transport Order - Setup Stock Transfer b/w Storage Location - Setup Storage-Location-Specific Shipping Point Determination
    Option 1: Define Rule for Determination of Shipping Point
    Option 2: Assign Shipping Points According to Storage Location (this should be there, if in Option 1 Determin. Rule; Shipping Point is L: Storage-Location-Specific Shipping Point )
    Regards
    JP

  • Remote Desktop and Windows Firewall Settings Not Working,

    Hi to all....
                 In My office am using Windows 7 ultimate x64 OS,Remote Desktop is Not working for Reason is Firewall is Turn on,i go  to Control Panel Settings to turn off the Firewall,But Firewall Setting are Not Working
    i Traced the Event Viewer its shows Error Code 5, Am search any patches for this error but cannot find it, Any one Advice Me.....i Hope Your Valuable Reply.....

    Hello,
    this forum is related to Windows Server. For Windows 7 please ask in
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Will it work to install windows 8 through bootcamp as in bootcamp it says you must have a genuine copy of windows 7 home premium, xp or vista and windows 8 is not listed?

    I have recently spoken to apple care and they are ringing me back in the morning but I want to try and progress as far as I can before hes does. I have managed to partition my disk but before I go any further it says you must have a genuine copy of Windows 7 home premium, professional or ultimate.
    I have windows 8 and this is not listed here. will it work?
    It is quite an old mac but running 10.6.8.
    Please help
    Thanks
    Vicky

    Welcome to Apple Support Communities
    Windows 8 also works, but only with compatible Macs > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US Note that you can also install Windows 8 in non-supported Macs by Apple, but you will not be able to install the Windows support software.
    As you have got Mac OS X Snow Leopard and after checking that your Mac supports Windows 8, you need to download the Windows support software from this website > http://support.apple.com/kb/dl1638

Maybe you are looking for