15.4, 7200RPM Hard Drive NOT beeping and clicking

As a recent purchaser of a new 15.4 MBP with a 7200RPM hard drive, the discsussions regarding the beeping/ clicking/ freezing has caused me great concern.
I have not yet received my computer (in fact it still hasnt shipped), and I am considering cancelling the order. Before I do that though I wanted to see how many people were NOT experiencing these problems with their recent MBP's with the 7200RPM drive.
thanks in advance

Hi Kmac,
I read much of the lengthy thread regarding new MBP's with the factory upgraded Seagate 500 GB 7200 RPM hard drive (apparently this drive has 'motion sensor' which may be conflicting with MBP's internal 'motion sensor'?). Anyhow, I am considering the purchase of a 15.4" MBP and can really utilize the extra space and faster performance of the 500 GB drive. I think that your solution sounds great. A DIY upgrade (cost is much less than ordering the upgrade too, wonder though if a DIY upgrade would void the warranty and/or Applecare?). Here is what I have found on OWC for a DIY HD upgrade for the MBP. This Seagate HD appears to have the 'motion sensor' though. Where did you obtain the 'non motion sensor' version of this HD?
How easy was the DIY process? I've seen OWC help videos for this process and it looks fairly easy.
Thanks in advance for your input.
Best,
Dennis

Similar Messages

  • Hard drive makes plunking and clicking noises after Firmware Update

    My Macbook hard drive worked fine for 9 months until I installed the EFI Firmware Update 1.1 a few months ago. The hard drive then started making plunking or clicking noises every 30 seconds or so, which is beyond annoying. Eventually, I became worried, backed up my data and took it to Apple to get the hard drive replaced. They replaced my 120gb Toshiba drive with a new 120gb Fujitsu drive and it does the same exact thing.
    Apparently the plunk is the sound of the drive head parking on the disk. I am now pretty certain nothing is wrong with my hard drives but something was changed during a Firmware or Software Update that tells my hard drive to park the disk head every 30 seconds. Ive found a few other similar cases on the internet. The drive seems to function fine otherwise.
    I know two other people with Macbooks and their hard drives don't make the same noise as mine despite having the same drives. Ive tried two hard drives now, Ive tried various power settings, disk utility doesn't find any issues and performance hasn't suffered. Its just an incredibly irritating sound every 30 seconds that is driving me crazy.
    I don't want to learn to just deal with it because its annoying and distracting, and is possibly something created from an update.
    Anybody have any ideas?
    Thanks,
    Ed

    Hi, welcome to Discussions,
    You may have seen some of the various threads about this on this forum. There were many last year (summer 2006) and I've noticed some recently:
    http://discussions.apple.com/thread.jspa?messageID=5747020&#5747020
    http://discussions.apple.com/thread.jspa?threadID=1226956&tstart=0
    None of the threads last year provided any "fixes" as far as I remember, the way people are attempting hacks above.
    I had the parking-like sound (never found out if it really was parking) on three consecutive Seagate 80Gb drives in a first generation MacBook Core Duo. It would start after about a day and a half after receiving it, presumably after Spotlight had finished indexing and the drive was then being left idle. The drives were perfect otherwise, and whisper quiet (which made the thunking sound easier to hear). Finally the Apple Store in Brent Cross, London determined that the sound was normal, saying these newfangled smaller SATA drives make such sounds which are normal to their operation. I decided to drop my concern, because the drive (#3!) was working fine.
    Your experience is interesting because it seems to relate the offending drive action to the EFI Firmware Update. In my own case my MacBook was replaced last month because of a different issue and the new one (Core 2 Duo – yay!) has a Hitachi 120 Gb which is noisier in general, but no clunks to be noticed yet.
    Good luck!
    Rhys

  • You can't upgrade to a 7200rpm hard drive in the Early 2011 13" MacBook Pro. It is not supported. Period.

    I tried unsuccesfully to upgrade the hard drive in my Early 2011 13" MacBook Pro to a 750GB 7200RPM hard drive. After several attempts with different hard drives I realized that the kernel panic that showed up was due to the lack of compatibility with the drives to the MacBook Pro. I had a Mid 2009 13" MacBook Pro that I did not have any issues with whatsoever. I sold that MacBook Pro and was able to upgrade to the brand new base model without any out of pocket cost. Upon purchase of the new 13" MBP I maxed out the RAM to the full 8GB. After 2 months of freezing, lockups, spinning rainbow wheels and having to force shutdown I tried one last ditch effort to see if a faster drive would help. After speaking with the Apple telephone reps and the Apple Store Genius Bar we discovered that Apple doesn't even offer the option of a 7200RPM drive on their website - a fact that I found quite disturbing. The concensus is that it is a power management issue that causes the incompatibility and the reason the drives are not offered on the 13" models. The problems I had were the end of the line for me. I just switched out that train wreck for the Early 2011 15" MacBook Pro base model. I got home and immediately installed the 750 GB 7200RPM Western Digital Scorpio Black hard drive and it was recognized within seconds. I'm back in business with gleeful abandon.

    Sadly... they don't have all the answers. As someone who use to serve in the capacity (Mac Genius) it can definitely be a challenging position. You're "the voice" of Apple's service policy & procedures. Sounds like the person you spoke with got it wrong this time. It's definitely worth a follow up, because like I said, I've got a machine in my household that's living proof of compatibility between a 7200 RPM drive and 13" MBP (Early 2011).
    Apple is very good about support documentation when there's incompatibility or unsupported configurations, the fact that there isn't one for 7200 RPM drives would tell me that the people/person you spoke with was misinformed.
    I know I always appreciated when a customer made it known to me that I was wrong on something and supplied the right answer. I sure as heck don't have all the answers and if I can lead from my mistakes, well, I won't make them anymore.

  • My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

    My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

    Update to iTunes 10.3.1
    After you have finished, you can re download your iTunes purchases without having to re purchase.
    iTunes 10.3.1
    " Download Previous Purchases. Download your past music purchases again at no additional cost. Your purchases are available in the iTunes Store on your Mac or in the iTunes app on your iPhone, iPad, or iPod touch. Previous purchases may be unavailable if they are no longer on the iTunes Store."
    "Available on iTunes in the U.S. and Canada only. Title availability is subject to change."
    From here.  http://www.apple.com/itunes/

  • I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

    I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
    Write Status is Read/Write
    SMART Status is Not Supported
    Partition Map Scheme is Master Boot Record
    HELP!
    timothy7712

    You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

  • I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

    I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

    Most users should use the Time Capsule for backups. This assumes that "original" copies of your data are on the computer and backups of this data are stored on the Time Capsule.
    If either the Time Capsule or the hard drive on your computer fails, there are at least copies of your important data on the other drive.
    If you are asking if you can place "original" files on the Time Capsule, do you have a plan to backup those files?
    If the Time Capsule drive has a problem....and your only copy of your important data is on the Time Capsule....you will lose everything.
    If you are asking if this is OK, the answer for most folks would be "no".
    Can you clarify if this is what you are asking?

  • I want to upgrade my Hard Drive to 1TB and more.  What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

    I want to upgrade my Hard Drive to 1TB and more.
    What is the maximun Hard Drive I can install for a MacBook Pro 2009
    Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

    The largest 2.5" dia SATA drives available are 2 TB in capacity.
    Have you tried the Seagate SSHD connected externally to the MBP via USB?  The drive itself may be faulty.
    Ciao.
    Here is a good place to start looking for a replacement drive:
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

  • I downloaded Lion in October and it would not install because it said "the disk Mcintosh Hard drive is damaged and cannot be repaired" Any ideas?

    I downloaded Lion from the APP store onto my imac (running Snow Leopard v. 10.6.8, 3.06 Ghz Intel Core i3, 4GB Memory with over 200GB of storage space, which I also Time machine back up to an external hard drive. I also run Office for the Mac 2008, ilife 08 and iworks 09) it downloaded but then wouldn't install as it said the hard drive was damaged and not able to be repaired.
    I then called apple support who advised me to run disk repair/verification of disk, and no faults were found.
    We also looked at the partition disk which apparently there was 2.
    Finally we started in safe mode with the original disk (DVD) of Tiger (I couldn't find the original DVD that came with the imac which I bought in Nov 2010 - although I have now found this!) in the DVD driver and the whole hard drive crashed and was unresponsive.
    So, I had to take it to apple store, wipe my HD. I then re-installed Lion and all my data from my external HD and tried again, and the whole thing happended again.
    So I took it back to apple who re-installed Snow Leopard which I am now running with no problem at all.
    I still wish to use Lion mainly because I also use Mobile me and so want to be able to sync my iphone and ipad to my imac beyond June 2012!!
    Any suggestions about what this could be or how to avoid another 2 trips into Apple Store!

    I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc  and try to repair the drive. Then try the upgrade again.

  • My hard drive recently crashed and I had a new one installed and upgraded to Yosemite since then I have not been able to get on my banks website to do online banking.  Any suggestions on how to get back on there?

    My hard drive recently crashed and I had to have a new one installed, at the same time I upgraded to Yosemite since then I have not been able to get on my banks website to do any online banking.  I just get a blank page after I log onto the bank.  Any suggestions on how to fix this?

    Using Safari? Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items.  Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
    Try another browser as a test.
    Firefox

  • How do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.

    how do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.

    reinstall over your current installation and then uninstall, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    or uninstall manually, Manually remove Adobe Creative Suite 2.x | Windows

  • I had a hard drive blow out and lost my itunes library. Now when I connect my ipod itunes tells me it is not sync'd. I am not permited to delete or add any songs. I do not want to loose my ipod songs if I reset. Any ideas? Thanks.

    I had a hard drive blow out and lost my itunes library. Now when I connect my ipod itunes tells me it is not sync'd. I am not permited to delete or add any songs. I do not want to loose my ipod songs if I reset. Any ideas? Thanks.

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • My hard drive was wiped and when I try reenter my code, it does not let me redownload my creative cloud Student edition.

    My hard drive was wiped and when I try reenter my code, it does not let me redownload my creative cloud Student edition.

    go here, sign in and retry downloading, Adobe: Creative, marketing, and document management solutions

  • I am the administrator on my computer but my new hard drive is locked and does not give me permission to unlock

    I am the administrator on my computer but my new hard drive is locked and does not give me permission to unlock. How do I fix this? I already tried fixing permissions.

    Whoops! I don't know why but this time when I clicked on the lock it opened and I was able to fix the problem. I am curious tho' as to why this happened.

  • HT1420 how do i Deauthorize a computer that has had the hard drive lock up and can not get it working

    how do  i deauthorize a computer that has had the hard drive lock up and can not get it working

    You can only deauthorise individual computers directly on them. Otherwise if you've reached the 5 computer limit, then you should be able to log into your iTunes account and 'deauthorise all' (which you can only do once every 12 months) and you can then (re-)authorise up to 5 computers : authorising and deauthorising.

  • Hard drive constantly running and ruining battery life

    Hello,
    I recently got an x200s from a legit ebay lenovo seller that came with an upgraded 500gb 7200rpm hard drive.
    The problem is that the hard drive is running at All times. I can tell from the sound as well as slight vibration. Even with the lowest power settings, and just letting it idle, it runs. I tried playing with the power manager, and having the hard drive stop activity after 30 seconds of inactivity, it keeps running. I turned off indexing on the c as well as the lenovo back up drive, its still running. The hard drive activity light is only flickering, and the processes seem totally normal. What is up?
    I'd say this also has to be the reason i'm only getting like 2 hours with the 4 cell  and very low power settings, which is unacceptable. 
    Any thoughts?
    Thanks guys

    Nah...if you choose a less-than-sensible setting in BIOS, an arm holding a hammer will come out of the LCD and smack you...that's a part of ThinkVantage that only a few people know about...
    How many processes do you have running on a freshly booted machine?
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Maybe you are looking for

  • My iPod Touch won't connect to my laptop

    I've had my iPod touch for a year and it won't connect to my laptop for about 3 to 4 months now. I think its the new generation? iOS 8. I've done everything almost. I uninstalled iTunes and reinstalled it and I made sure my laptop had all of its stuf

  • Create service under Windows for SUn application server 8.2

    I am trying to create a service on a Windows Server 2003 with the sc utilities. I am following the doc's syntax C:\\windows\\system32\\sc.exe create myservice binPath= "C:\\Sun\\AppServer\\ lib\\appservService.exe \\"C:\\Sun\\AppServer\\bin\\asadmin.

  • Configuring Solaris 8 Sparc w/router and cable modem

    I recently purchased a Sun Ultra 10 with Solaris 7 pre-installed. I decided to immediately upgrade to Solaris 8. The operating system has installed properly so far. However, I'm at the point now where I am entering information to allow Solaris to con

  • How to load data in infocube BW 7.0.

    Hi, I am loading data in Infocube from R3(ECC 6.0) to BW(7.0). Following are the details. Steps in R3. 1) I have created customized table in R3 and loaded data in the table. 2) Using transaction RSO2 I have created data source. 3) I am able to extrac

  • Package javax.servlet.http does not exists

    Hi, I am new to J2EE and am writing my first servlet. I tried to compile a servlet I wrote and got the following error. "package javax.servlet.http does not exists". What do i do to correct this error? Also is there any links which has a complete ser