15-inch have the same high adobe rgb gamut as 17-inch?

Just wondering if the 15-inch has the same high adobe RGB color gamut as the 17-inch (think it is like 90% of the gamut or something like for the 17-inch). Thanks in advance! This is the Only thing keeping me from purchasing the 15-inch right now.

Actually, it all depends upon your needs, as you see them. While it’s true that ‘many, many’ professional photographers use the 15” UMBP, a great many do not. And, of those that <do>, many cannot afford the investment, don’t wish to acknowledge there’s even a possibility that a difference exists (I’ve seen this in studios many times- it’s known to some of the staff and creative heads for whom I’ve consulted as ‘17” envy’.)... Then there’s the flat-out ignorance of the difference, and, lastly, the least-common reason- “... I know the difference, need the difference, but I’m going to settle for ‘adequate’...”. Not common if the Pro’s needs are more than average. The ‘ballpark’ is sometimes not good enough- if it often needs to be a certain part of the outfield, then the 17” UMBP’s screen, the best laptop solution is the next step up from the 15” UMBP. The realistic expectations of a pro photographer, who needs more than the display accuracy of the 15”UMBP, there IS an alternative. And if it raises productivity, and/or the quality of your final product, the 17” display’s broader color gamut is immediately worth it as an investment going forward; after a certain period, the 17” becomes cheaper, not more expensive to use, by saving editing time on the 23”, for example, when the workflow can be more ‘localized’ to left field, rather than Wrigley Field ;^). I use the 15” UMBPs all the time- but for color-critical work, where time is money and my 30” ACDs are far away for the day, I need MORE than the 17” UMBP can provide, so all the hardware ability I can get is a requirement, not an alternative. An example: I had to batch-process over 600 NEFs from my D3X several weeks back... I had both a 15” and a 17” at my disposal, the 15” calibrated to its color space limit, a just-barely Adobe RGB 1998, w/ 500GB 7200 rpm drive, 6GB RAM, Capture One Pro, NX2, LR2, Aperture, Bibble, RAW Developer, CS4, etc..., same software on my 17”, but 8GB RAM, a calibrated ProPhoto color space, bigger screen, 2.93 Ghz processor, and no power to either for the afternoon. Both batteries were fully charged, and I had an extra battery for my 15”, also fully charged. I knew I could batch-process all 600 NEFs on the 17”, and still have about 35-45 minutes of surf/e-mail time after batch-processing. I also knew that, if I grabbed the 15” for the job, I’d have to batch-process WAY differently, since I’d have to ‘strip’ each NEF of its ICC tag (for Adobe RGB 1998), because, if I batched into CS4 or Aperture or Capture One Pro, for example, with any of those programs on the 15”’s ‘maxed’ ICC calibrated color space of Adobe RGB 1998, I’d never regain the lost gamut from any of the 15”’s batched files, because, well.. it’d be gone. With the 17”, calibrated to ProPhoto RGB, I’d be able to bring ALL the gamut from ALL my batched files into CS4 one of my office office Mac Pros (32GB, 8-core, 12 TB RAID, yada yada), and have a leg up on the next day, when some of these batched files would be fed the output ICC tag of ProPhoto RGB to print on an Epson 9800 for proofs that could hang on a gallery wall, which is exactly where my client wanted to be able to hang HER NEF files, after the full process she wanted to implement at her studio, beginning with a Nikon + laptop, next stop, ProPhotoRGB files being fully massaged on a pair of 24” ACDs (LED), then some of these being incorporated into very high-end HD video loops edited in FCP. ProPhoto RGB is the ONLY color space that photo files have a chance in that kind of application, as with so many other pro applications/scenarios; Adobe RGB 1998 may be NTSC-safe, but would be dwarfed by the video gamut, given the type of output monitors being used...
all right, so many, many scenarios are far more mundane, but obviously still ‘professional’ in nature.. I’m illustrating my point with a high-end flashlight so that the spectrum is clear- in so many professional photo, video, layout and graphical, even architectural applications/situations, the 8GB, broadest-gamut capable, big-real-estate, 133 dpi screen rez (AMAZINGLY helpful when editing/viewing fine detail/tonal gradations), and even the 2.93 Ghz chip (I save about 20 minutes a day, by my estimation, with the difference in clock speed alone, for some of the transcoding and Shake-related projects I do), amount to a significant increase in both utility and ‘easy-breathing’ performance- it’s easier to hit the bulleye when your equipment’s not breathing too hard, straining at its limits!
OTOH, if the above sounds like WAY further out to sea than you normally venture, get the smaller, more maneuverable craft. But if you need a rig that gets you between islands as fast and as accurately as possible, the big dog’s your rig. To strain the metaphor a <little> further, it sounds as if you might need the bigger boat, eventually, and RAW files in CS3 go WAY more accurately and speedily on the 17” UMBP- I’d get the blue-water rig, because you never know when you’ll get a job that changes your needs for good- to the bigger! ;^)
Best,
Charlie

Similar Messages

  • I have the same repeated ADOBE SYSTEM INCORPORATED notifications

    Ive selected no on the uprade and it still pops up a million times. I tried selecting yes after clicking "show deatils". Certificate Information, Datails,and Certificate Path show up..Im not sure what everything means, but that thebottom it says that "cerificate is ok". It loaded afterwards and the same notification pops up righ after I say no. I dont know if this will help but the program location says the following,
    fpdownlaod2.marcomedia.com/get/shockwave.cabs.flash/swflash.cab
    i hope someone can help me fix this.. its rather annoying and i dont know if i did something wrong.

    Click the "Assist me" button in the Network preference pane. How far do you get?

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • What is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

    what is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

    There is no key because that is an important dialog.  Why would you want it to go away?

  • I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

    I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

    Hi Prabhuram and falez,
    This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
    ~Surendra

  • Why cant I open a PDF file from a cd-r that I burned into this cd myself at work on my personal laptop? I have the same version of Adobe.

    Why cant I open a PDF file from a cd-r that I burned into this cd myself at work on my personal laptop? I have the same version of Adobe.

    What happens when you try? Have you saved to your computer and then tried to open it?

  • I am using PS cs6 and lightroom and I am having a hard time know what color space to choose.  The lab that I am using told me that their color space is sRGB.  Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and jus

    I am using PS cs6 and lightroom and I am having a hard time know what color space to choose.  The lab that I am using told me that their color space is sRGB.  Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and just set my export from lightroom as sRGB?

    Please post in the Photoshop forum.
    http://forums.adobe.com/community/photoshop
    Bob

  • I brought a macbook air 11 inch mid 2013 since i have updated mountain lion it shuts down automatically I have done SMC reset still I have the same issue... any suggestions??/

    I brought a macbook air 11 inch mid 2013 since i have updated mountain lion it shuts down automatically I have done SMC reset still I have the same issue... any suggestions??/

    the thing is that when i did the clean install they did check with a hardware test first and nothing was wrong, i guess it was a false-positive, is there anything in the kernel report from which i can say it's either hardware or software related

  • I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can  do? C

    I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can  do? Can someone answer in German?

    I suspect you will want to ask your question at the forum for Adobe Digital Editions which is eBook, eBook reader device focused.
    Be well...

  • My iphone and desktop have the same ip address, new ipad comes up different. Ipad data usage very high. All use the same Linksys router

    My  two iPhone4, Vista PC desktop, Gateway XP desktop and Dell XP portable all have the same IP address. New iPad2 comes up with a different one and seems to eat data from AT&T. All share the same residential router. Shouldn't the  iPad  IP be the same as the others?
    Thanks.
    Befuddled new iPad guy.

    Excuse again. Wrong info. Router # comes up same for all units.
    IP addreses are same except for last digit. As< I think it should be.
    Think I will visit the Apple store.
    Forget it, sorry to bother you. Fail.

  • How do I set up the app FindMyiPhone on more than one phone when all phones have the same Apple ID?

    I have two iPhones and I want to set up FindMyiPhone on both phones but we both have the same apple acct.  I want to be able to track my teenage son's whereabouts and this would be a good way.  When I log into iCloud, only my iPhone shows up.  His used to but after I did a weekly restart on my iPhone I lost his.  Before, mine wasn't showing up, only his.  Now mine show's up but his doesn't.

    You could look at using a template.  Create your master template, create editable and non-editable regions, then use this template create all the child pages.  When you need to make a change to the menu, make it in the template and the changes will flow down to all the pages created from the template.
    Using DW Templates:
    http://www.adobe.com/devnet/dreamweaver/templates.html
    http://www.adobe.com/devnet/dreamweaver/articles/dw_templates.html
    The other option would be to create the Navigation item as a server side include...
    More about this:
    http://kb2.adobe.com/cps/143/tn_14380.html
    http://www.entheosweb.com/website_design/server_side_includes.asp
    Difference between using a template and server side includes.
    When you make a change to a template, you need to re-upload all the pages created from the template.
    Using a SSI, you make the change in the ssi file,  upload it and all pages are automatically updated.
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://www.perrelink.com.au
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    http://csstemplates.com.au/
    http://twitter.com/nadiap

  • TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem.  Autorun only shows the Bonjour service.  It started when try to sync more than one iphone.

    This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem. 
    Autorun only shows the Apple Bonjour service.  It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%.  It is the AppleMobileDeviceService.exe process.

    For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart.  Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem.  Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
    Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant.  I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

  • Can I have the same printer installed multiple times under different names?

    On WIndows I have the same printer installed multiple times
    All using the same driver
    I have a Canon printer that has a rear tray and a bottom tray
    So, I will have one printer that prints to the rear and the other to the bottom
    Other printers (the same one) will be set so that they print in high quality and in duplex for example
    I'll name the printers 1.Canon 2.Canon 3.Canon etc
    So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
    Can I do the same on my laptop?
    Thanks
    Omar

    Back Up - that's in case things go wrong.
    In the case you cite:
    You have
    Mother
    Mother Maiden Name
    as Faces, right?
    In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
    It will disappear and all the photos will be in the Mother face.
    Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
    You can  also just edit the name 'Mother Maiden Name' to 'Mother'
    As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
    Regards
    TD

  • On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

    On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

    I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
    Daniel
    Codecs audio
    Type
    Nom
    Format
    Binaire
    Version
    ACM
    Codec Microsoft IMA ADPCM
    0011
    ACM
    CODEC A-Law et u-Law Microsoft CCITT G.711
    0007
    ACM
    Codec audio Microsoft GSM 6.10
    0031
    ACM
    Codec Microsoft ADPCM
    0002
    ACM
    Fraunhofer IIS MPEG Layer-3 Codec (decode only)
    0055
    ACM
    Convertisseur PCM Microsoft
    0001
    DMO
    WMAudio Decoder DMO
    0160, 0161, 0162, 0163
    WMADMOD.DLL
    6.1.7601.17514
    DMO
    WMAPro over S/PDIF DMO
    0162
    WMADMOD.DLL
    6.1.7601.17514
    DMO
    WMSpeech Decoder DMO
    000A, 000B
    WMSPDMOD.DLL
    6.1.7601.17514
    DMO
    MP3 Decoder DMO
    0055
    mp3dmod.dll
    6.1.7600.16385
    Codecs vidéo
    Type
    Nom
    Format
    Binaire
    Version
    ICM
    Microsoft RLE
    MRLE
    msrle32.dll
    6.1.7601.17514
    ICM
    Microsoft Vidéo 1
    MSVC
    msvidc32.dll
    6.1.7601.17514
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.1.7601.17514
    ICM
    Codec Intel IYUV
    IYUV
    iyuv_32.dll
    6.1.7601.17514
    ICM
    Toshiba YUV Codec
    Y411
    tsbyuv.dll
    6.1.7601.17514
    ICM
    Codec Cinepak de Radius
    cvid
    iccvid.dll
    1.10.0.13
    DMO
    Mpeg4s Decoder DMO
    mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
    mp4sdecd.dll
    6.1.7600.16385
    DMO
    WMV Screen decoder DMO
    MSS1, MSS2
    wmvsdecd.dll
    6.1.7601.17514
    DMO
    WMVideo Decoder DMO
    WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
    wmvdecod.dll
    6.1.7601.18221
    DMO
    Mpeg43 Decoder DMO
    mp43, MP43
    mp43decd.dll
    6.1.7600.16385
    DMO
    Mpeg4 Decoder DMO
    MPG4, mpg4, mp42, MP42
    mpg4decd.dll
    6.1.7600.16385
    De : sarika02 
    Envoyé : 17 juin 2014 19:26
    À : Daniel Cloutier
    Objet :  On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
    On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
    created by sarika02 <https://forums.adobe.com/people/sarika02>  in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796>

  • Error: A file found in a source-path must have the same package structure

    I use Adobe Flex Compiler (mxmlc) Version 4.1.0 build 16032,I have a file,named CustomGraphContainerController.as,it's directory is c:\controllers,and the GCController.as file is under the same directory,CustomGraphContainerController.as file like follows
    package controllers{
    import ui.GraphControlContainer;
    public class CustomGraphContainerController extends GCController {
      public function CustomGraphContainerController(a_graphControlContainer:GraphControlContainer) {
       super(a_graphControlContainer);
    Then I want to use mxmlc command to compile it,like follows:
    C:\>mxmlc c:\controllers\CustomGraphContainerController.as
    But it raise compile errors,like follows:
    Loading configuration file C:\sdk\frameworks\flex-config.xml
    C:\controllers\GCController.as: Error: A file found in a source-path must have the same package structure '', as the definition's package, 'controllers'.
    I don't know how to compile the as file with package controllers? Where is wrong? How to use mxmlc to compile it?
    Thanks

    HI,
         You should have one main application class to compile this as code to swf.. So that main application path should be in your proper package structure.. then you can compile you app and as files also...
    Thanks
    Ram..

Maybe you are looking for

  • Flash Player on Ubuntu 8.04

    I'm using Ubuntu 8.04 on a HP Pavilion Entertainment PC. Flash player does not work properly, and I need some ideas, tips, and or a new version of Flash Player. >^,,^< meow!

  • Help: folders in Mail disappeared!

    I regularly check two POP mailboxes in Mail in 10.4.3. While on vacation, I moved the Users/Library/Mail folder and my Mail prefs (Users/Library/Preferences/com.apple.mail.prefs or whatever it is) to my laptop and then proceeded to work from my lapto

  • Using Swing Parser locks up.

    I'm using the Swing Parser class to read all the text content of an HTML page off the web. I override the parse() method. I then setup my URL connection and setup my BufferedReader, and then I call super.parse(br); I run this code every 5 seconds in

  • Publishing to MobileMe fails

    Not sure what to do here because, MobileMe (formerly dotMac) has worked, all be it slowly, but seamlessly. I'm trying to publish a modest number of images to a gallery (50 images) prepared for optimized download capabilities. I've done this many, man

  • Pivoting help required

    Hi I am using oracle 11.2.0 version I need help in pivoting the values. Here is the sample data looks like with t as SELECT 'JACK' C1,'RAM' C2,'LAND' C3,'KELLY' C4, 'WORKING' STATUS FROM DUAL UNION ALL SELECT 'JAMES' C1,'NAREN' C2,'SRUJAN' C3,'GANA'