15" Macbook Pro mid-2010, 16GB RAM upgrade possible?

Hi all,
I've been looking around all the support forums and questions asked etc..
But I can't find a definitive answer about support for the 15" mid-2010 MBP being able to use 16GB (and be stable).
I'm aware that it's perfectly fine on the 13" model, however I have the 15" i7.
From what I've been reading it's because of the motherboard/Graphics chip/EFI BIOS incompatibiity with anything more than 8GB. (Which is silly really, as the same Intel core i7 can have up too at least 32GB of RAM on any none-Mac system.)
Have Apple not pushed out an EFI BIOS update that could allow the use of 16GB RAM?
If this has been clearly answered elsewhere (and I haven't found it), feel free to point me in the right direction.
Thanks, Jon.

Unfortunately, 8GB is the limit. I have the same machine. Why it works on the 13" and not the 15" is ridiculous, but that's how it is.

Similar Messages

I want to upgrade my macbook pro mid 2010's ram

I want to upgrade my macbook pro's ram to 8gb's I don't want to spend $200 on ram from apple, i Know that with buying it from apple, if it doesnt work they will do it for you, and it guranteed to work, i just don't have the money to do that.
they outlined how to do it here http://support.apple.com/kb/HT1270#link1
and i found some memmory here
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=2F9CE069A5CA7304
I am confident in my computer knowledge that I can install ram in a mac, i've done it to dozens of pc's
so what i'm looking for is reassurance before I do anything thank you

There should no problem in installing 8 GB RAM in your MBP. Crucial is one of the best sources of RAM for Macs. Now if you are so inclined, you can install 16 GB from OWC, the other reliable source for Mac RAM.
blog.macsales.com/16353-owc-announces-maxram-memory-upgrades-to-16gb-for-2010-ma c-mini-macbook-and-macbook-pro
Ciao.

Macbook pro mid 2010 15" 16 GB ram upgrade possible?

I recently purchased RAM from Crucial.com for 8 GB and after having researched a bit online I've heard of users upgrading to 16 GB. Is this true?
Here are the specs of my cpu:
MacBook Pro 15" Mid 2010
OSX Yosemite 10.10.1
Memory 8 GB 1067 MHz DDR3
2.53 GHz Intel Core i5
Can anyone give me insight? I'm not very computer literate, but could use all the advice I could get. Thank you kindly

Good morning ipodsmut,
The MacBook Pro mid 2010 model supports up to 8GB of RAM. See this Apple specifications article -
MacBook Pro (15-inch, Mid 2010) - Technical Specifications
Thanks for using Apple Support Communities.
Best,
Brett L

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Apple Unibody 13.3" MacBook Pro (Mid-2010): 4GB vs. 8GB DDR3 1066MHz Memory (RAM).

Apple Unibody 13.3" MacBook Pro (Mid-2010): 4GB vs. 8GB DDR3 1066MHz Memory (RAM).
1. About my Mac.
     Processor: Intel® Core 2 Duo (2.66GHz)
     Memory (RAM): 4.00GB DDR3 1066MHz (2 x 2.00GB)
     Hard Drive: 320GB 5400RPM (Apple Stock HD)
     Graphics: NVIDIA GeForce 320M (256MB)
     Operating System: Mac OS X Lion (10.7.1)
2. My concerns/questions
     For quite some time now, I've been planning to upgrade the memory (RAM) of my MacBook Pro from 4.00GB (Apple Stock) to 8.00GB. In terms of "FASTER BOOT TIMES, IMPROVED RESPONSIVENESS (OPENING and CLOSING PROGRAMS, FILES & ETC.), SMOOTHER GRAPHICS, ABILITY TO OPEN MORE PROGRAMS SIMULTANEOUSLY AND OVERALL IMPROVEMENT IN PERFORMANCE", does it really make a BIG difference?
     If ever I am going to pursue this upgrade, should I let Apple do the upgrade or buy the parts and do it myself?
     If I am going to buy the parts and install it myself, what brand do you recommend? Crucial, Kingston, OWC & etc.?
     Why does Apple charge so much for memory (RAM) upgrades? Is the memory module they are using any special compared to the ones we can find in Amazon (Crucial, Kingston, OWC & etc.)?
Thanks for helping me out with my concerns.

I recommend OWC RAM because it's reasonably priced and OWC's support is great if you ever need it. I recommend installing the RAM yourself because it's dead simple. There is no good reason for anyone ever to pay Apple's prices for RAM.
I don't think you will see faster boot times with more RAM, but that shouldn't be a concern, because there's seldom any need to shut down or restart a MBP. Just put it to sleep when you aren't using it, unless you won't use it again for more than two or three days. Opening and closing programs won't benefit significantly from more RAM either, but when running multiple large programs at once, you will see a significant improvement in their performance. It's well worth the small investment ($65) to upgrade from 4GB to 8GB.
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

Installing 8GB ram on MacBook Pro (Mid 2010)

Hi, I have bought 8GB(2*4GB) ram to install on my macbook pro, when I install both I get a black screen but when installing one or the other with one of the original ram they both work. What can I do to fix this problem??

Topher Kessler California
Re: Installing 8GB ram on MacBook Pro (Mid 2010)
Jun 1, 2013 8:00 AM (in response to emiliosh)
When you install RAM, reboot your computer with the "D" key held down (or the Option-D keys). These will load the Apple Hardware Tests.
With these tests open, check the box for the extended memory test, and then start the test. This will have the system thoroughly test the RAM for errors.
In your case, it appears you may have a bad set of RAM modules, but you can check them using the method above.
When you have them paired with your original RAM, how much memory does the system report as being available when you select About This Mac in the Apple menu? If you are using Lion or Mountain Lion, then in this panel click "More Info" and then select the "Memory" section, and see what the system reports as being installed.
Is this RAM test necessay with every upgrade of memory or just if you have problems after the upgrade
Thanks

Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen. Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%

Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen.
Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%& !!!!
Back again to mini display to hdmi cable.
could you help me????

It is stated that mirroring requires recent hardware (2011 or later)
http://support.apple.com/kb/ht5404
However you can still use 3rd party solutions like Airparrot which do it via software

Unable to open Bootcamp install of Vista after upgrading MacBook Pro / Mid 2010 to OS Mavericks

Dear Community,
I am unable able to boot the Windows Vista install (via Boot Camp) on my MacBook Pro / mid 2010 after upgrading to OS Maverick.
Any idea about how this problem can be solved (I don't want to purchase Windows 7 and I don't want to purchase a virtual machine)?
Many thanks for your support!
Regards,
PSeguro

Hello 88,
I haven't resized / modified anything since installing Vista on my System. The problem must have incurred when upgrading from Snow Leopard to Maverick.
by the way:
I (just) found out that Windows Vista is booting (automatically) when I insert my original "Mac OS X Install DVD" / 10.6.3 (or my "Applications Install DVD") before starting the MacBook. It will - hwr - not boot without above DVDs in the tray...
sudo fdisk /dev/disk0:
Disk: /dev/disk0          geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 510699696] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 511109336 -    1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 512378880 - 464394240] HPFS/QNX/AUX
sudo gpt -r -vv show disk0:
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 510699696      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
511109336    1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
512378880 464394240      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120         15
976773135         32         Sec GPT table
976773167          1         Sec GPT header
Regards,

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

My MacBook Pro mid 2010 was upgraded to mountain lion os x and then my wifi started saying no hardware installed

My MacBook Pro mid 2010 was upgraded to mountain lion os x and then my wifi started saying no hardware installed

Hello Harrisonhcue,
I would be concerned too if I was getting the message "no hardware installed" when trying to use Wi-Fi on my MacBook Pro. For a message like this, I recommend resetting your System Management Controller (SMC) and NVRAM.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
You can find the full article here:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thank you for using Apple Support Communities.
Best,
Sheila M.

What's up with the screw job on the Airplay mirroring? Macbook Pro (mid 2010) too old to have feature included in Mountain upgrade? Bull!

what's up with the screw job on the Airplay mirroring? Macbook Pro (mid 2010) too old to have feature included in Mountain upgrade? Bull!

Please read:
http://arstechnica.com/apple/2012/07/mountain-lion-airplay-mirroring-v-airparrot -fight/
Mountain Lion's integrated AirPlay mirroring support only works with the following Mac models:
iMac—Mid 2011 or newer
Mac mini—Mid 2011 or newer
MacBook Air—Mid 2011 or newer
MacBook Pro—Early 2011 or newer
If your Mac isn't on that list, your won't ever see an AirPlay option in Mountain Lion's menubar.
What separates these Macs from other Mountain Lion-compatible machines is that these are the only models that have support for Intel's QuickSync technology. What confirmed this requirement for me was the fact that my Retina MacBook Pro switched to integrated Intel HD4000 graphics even when otherwise running on the discrete NVIDIA GT 650M GPU. No matter what you are doing or what resolution you are running, AirPlay Mirroring in Mountain Lion requires an integrated Intel HD3000 or HD4000 graphics processor and its QuickSync technology to work, full stop.

Can a 17" Macbook Pro (mid 2010) be upgraded to bluetooth 4.0

I need bluetooth 4.0 for "handoff" to work on my 17" MacBook Pro (mid 2010)

There is no Apple upgrade available.
Barry

MacBook Pro Mid-2010 kernel panic at each restart

Hi,
As most of you, I succumbed to temptation to update my MacBook Pro (mid-2010) with OSX Lion. First, I've done a traditional upgrade from Snow Leopard (10.6.8) from the Mac App Store. Due to some problems (see list bellow), I've decided to make a clean install (by extracting the file InstallESD.dmg from the Lion downloaded package. I've burned the package on on 16GB USB key (8GB is sufficient). Well.. On both type of installation I've encoutered the same problems.
The 99% of the time, my MBP make a kernel panic at the start (both when I do a simple restart of the system or after restating the system after a normal shutdown.
As I use mainly my MBP for professional use, I set the system to ask for a user logon at system start. Mainly each time, it wasn't possible to logon to the system. As soon as I tried to enter my password, I only see the game wheel icon turning on the screen and no possibility to enter my password. In this state, my only solution was to restart my system by pressing the power button.
Both of these two problem was replicable in either an upgraded system or on a clean install.
Finally (because I'm a patient guy :-) ), I've do a third clean installation, restored my system from one TimeMachine backup and found a solution to avoid having the problem I explain into the point 2.
When you restore a backup from TimeMachine from within Mac OSx, you have to create a second admin account, log onto this account and run the Migration Assistant to restore your backup. Admitting that, like me, during the clean OS installation, you've used the same account name as the one you had into your backuped installation, at the time of the TimeMachine restore, Migration Assistant will propose you two things:
Create a new user and restore our TimeMachine backup on this new username
Replace the existing username on your clean installed machine my the one that was backup into timemachine
As I've previously created a new account with admin right, I've logged on this account, launch Migration Assistant, confirm that I'm okay to restore my TimeMachine backup on the already existing user.
Finally, this setup resolved my point 2 problem. The difference between my initial setup and the one I use now is that I've now two users presented on my logging screen. To log on now, I've to choose the user, enter the password and never had the problem I had before with only one user set on my system.
Now, I really hope that Apple will fix this first version of Lion asap. For the rest, I'm pretty happy with the system. I'll work this week with Lion and will see if I encounter other problems. One thing is sure, I'll keep my TimeMachine backup of my previous Snow Leopard system at a safe place until I'll be sure that Lion will be stable.
Cheers....

Hi,
That's correct, I'm running with one RAM chip, after testing the bays work correctly first, I elliminated that route, so it was indeed a bad RAM chip module.
I was just about to give up, as the first swap was with the good RAM out, so same problem. I thought I had nothing to lose by swapping the RAM again, and voila, it worked. I'm opening up some seriously big photoshop files at present, just to make doubly sure it's been resolved ha ha.
I'm looking at replacing my RAM now with OWC, as apparently according to their website and with the correct EFI updates, you can max out the mid 2010 MBP with 16GB of RAM. I'll much rather treat myself to that, than forking out on a new logic board.
I think it's quite a simple, but effective fix this one.
Thanks for all the advice and help, I really did appreciate it.
Ciao,
Adrian

Macbook Pro Mid 2010 (Model 6.2) restarts like cray cray

Can't believe this is happening...
Macbook Pro Mid 2010 Model - Intel i5 2.4GHz - RAM 8GB - GPU NVIDIA GeForce GT 330M
So I've seen quite a lot of threads discussing the 'GPU Panic' issue since I first encountered it a few weeks ago. The problem had never occurred on my MBP prior to that. However, the situation is now so bad that I wouldn't be able to open the Mac OS and make a copy of the panic report before it automatically reboots. Fortunately I have Windows 8 installed on the machine so I am still able to post for help on here.
A few questions / personal thoughts on the issue:
I bought this MBP back in June 2010 in China... So I won't be eligible for a free repair by any means right? It's been almost fours years since the purchase - significantly longer than three years restricted by Apple. I've seen another user who posted how they successfully defended their consumer rights by bringing some printouts of consumer laws and regulations. Lots of respect for that... But surely that only applies to goods purchased in the UK right? I'm so screwed... If a repair costs a few hundred quid then there is no point doing it, is there? I guess I can live with Windows for one or two years before the machine wears out and then get a new one. That being said, I still wonder if anyone in similar situation has managed to get free repair (GPU / logic board replacement or whatever it is). If so, mind sharing your story?
Is it nearly impossible to make a Genius Bar reservation nowadays or is it just me? My plan was to bring my MBP and talk to a genius and see where it goes. But both Covent Garden and Regent Street seem fully booked until a distant future. The reservation page does not show any available time slots, it simply says 'There are no available appointments at this store'. I mean I don't really mind if it is in a few days, a week, a month or even a year, just give me something. Telling people 'no availabe appointments at this store' is not very helpful is it? Since I have never had a Genius reservation (never had any issue using my MBP until this one - the good old days are gone) before, I'm curious what would happen if I just walk in with my MBP. Would they ask me to make a reservation or would they serve me right away?
Since I have never encountered the GPU panic issue (or any issue really) before I upgraded to Mavericks 10.9.2. I had never had any similar problems running Windows (Previously Vista, 7 and now 8) on my MBP either. I am speculating maybe the GPU Panic issue is more of a software bug. I am not ruling out the possibility of the GPUs being defective, but considering that fact everything was perfectly fine before the arrival of the evil Mavericks (for me, the upgrade to Mvericks 10.9.2), maybe the specific problem is down to Mavericks? I think this could be good news because Apple could quickly fix it for everyone as long as they know about the issue. Well... I don't think our chances of getting it sorted quickly are good, especially not when the new iPhone/iOS, which generates 10X more profits than Macs, is at the most critical stage of development. What do you guys think?
Oh it is just so frustrating. Using Windows on a Mac is definitely a nightmare - miserable 2 hour battery life and noisy non-stop fan spinning. Someone please help....................
TH

In the Replacement Program Support Article, it states:
Apple will service affected 15-inch MacBook Pro computers free of charge until three years from date of purchase. This worldwide Apple program does not extend the standard warranty coverage of the affected MacBook Pro.
http://support.apple.com/kb/TS4088
According to these terms, you are outside the eligibility window. However, I still second andyBall_uk's sentiments.
Make a Genius Bar Reservation. Print out a copy of the kernel panic report and the Support Article. If the 'Genius' refuses servicing without cost, ask for the store manager. It is ultimately at the manager's discretion.
Additionally, if this doesn't work out, you can look into Apple's flat fee repair program:
Do You Know About Apple's Flat Rate Repair Pricing?
Best of luck.

MacBook Pro Mid 2010 Running Slow

My Macbook Pro Mid 2010 is running slow. Here are the details from EtreCheck. The biggest issue I see is Carbonite but I am not sure if this is the real problem or not. I would appreciate anyone's help to get this computer running faster.
Also, planning to upgrade to OS X Yosemite. But I would like to resolve the speed issue first. Does anyone have an opinion on whether Yosemite would be OK with this configuration.
Thank you.
EtreCheck version: 2.0.11 (98)
Report generated November 28, 2014 at 12:45:23 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 54 days 2:30:12
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (139.71 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.equinux.VPNTracker6 (6.9.2) Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.carbonite.launchd.carbonitealerts.plist Support
[running] com.carbonite.launchd.carbonitestatus.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[running] com.carbonite.launchd.carbonitedaemon.plist Support
[loaded] com.equinux.VPNTracker6.agent.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Logitech Vid ApplicationHidden (/Users/[redacted]/.Trash/Logitech Vid.app)
Safari Application (/Applications/Safari.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins: ℹ️
SlingPlayer: Version: (null) Support
Safari Extensions: ℹ️
SlickSavings
Ebay Shopping Assistant
Searchme
3rd Party Preference Panes: ℹ️
Carbonite Support
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      77% CarboniteDaemon
      6% WindowServer
      6% com.apple.MediaLibraryService
      3% com.apple.appkit.xpc.openAndSavePanelService
      2% Pages
Top Processes by Memory: ℹ️
137 MB WindowServer
133 MB softwareupdated
125 MB CarboniteDaemon
82 MB Finder
73 MB Safari
Virtual Memory Information: ℹ️
411 MB Free RAM
1.28 GB Active RAM
1.03 GB Inactive RAM
959 MB Wired RAM
11.53 GB Page-ins
1.45 GB Page-outs

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor. The better your description, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

15" Macbook Pro mid-2010, 16GB RAM upgrade possible?

Similar Messages

Maybe you are looking for