1505n printer wired to network will not print configurat​ion for IP address

I have a HP 1505n printer that will not the configuration page so that I can get the IP address to set it up. I know it's not the cat5e cable because I've tested it by plugging my laptop to and it works fine.  The operating system is Windows 2008r2. I currently have 2 other 1505n printers which work great using a HP universal driver. Cat5e cable unplugged it will print and UBS cable connected to a PC it will print a usb config page. I followed HP's advice on resetting the printer but get the same results. Any suggestions? 

Hi Marcel17,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this by clicking the following link: Printers - LaserJet.
Hope this helps, have a good one!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

  • My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint.

    My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint.  I just get an error message when I go to the  HP Eprint centre.  It does print the cover e-mail but nothing else.  The attachment is not secure as far as I can see.  I have tried sending an attachment from my Mac and that worked fine.
    This question was solved.
    View Solution.

    Hello krnkln3.
    Are you trying to send the PDF as an attachment in an e-mail sent to the ePrint e-mail address of the printer or are you trying to print using the ePrint app?
    Try sending the same PDF document to the printer's ePrint e-mail address and let us know if that works. If this works but using the ePrint app is not working, maybe the ePrint app is not working fine with this PDF document (it could be due to it's size or something else). Remember that you can always use the e-mail ePrint address of the printer to send PDF documents as the processing is happening at the HP servers and not in your iPad as when you try to send it using the ePrint app.
    Cheers!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • HP Laserjet 4100 on network will not print

    Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
    My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
    I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
    I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
    Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
    Any suggestions?

    I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
    When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
    It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
    More to follow tomorrow.
    Anyone have any ideas?

  • Desktop PC (XP) on home network will not print from internet, laptop networked to desktop will print?

    my home desktop is connected to router and wireless networked to home laptop. the desktop will not print from the internet, will print local word docs, etc.. the home laptop is connected to that network and does print from internet. both are using Firefox.
    If i use Internet Explorer the desktop will print from the internet.

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Office jet 4620 on network, will not print

    I have an Office Jet 4620 on my wireless network at home.
    It has worked well until I installed a new router. The network sees the printer, I have entered my network password into the printer software.
    When I try to print the printer makes a little noise then locks up. The only way to get the printer to turn off is to pull the power cord.
    Any ideas?

    Hello kalister1,
    Welcome to the HP Forums!
    I understand your Officejet 4620 will not print. I will do my best to assist you! I am going to suggestion two options for you to try:
    Please follow this entire HP document on Printer Does Not Maintain Wireless Connection. Also, I would recommend following this HP document on Sleep Mode Issues. Your printer could be going into a sleep mode, this is why you're experiencing this kind of issue.
    Looking forward to hearing from you. Have a great night.
    I worked on behalf of HP.

  • IPAD2 with HP APP and connected to local network will not print?

    IPAD2@ and Netgear and Photosmart plus B210a.
    Will not print e-mail on Safari?

    Hello HarryE,
    What model of Netgear do you have? Have you ever been able to print from your IPad 2? You can try to unplug the router, then the printer and then turn off your ipad 2, then restart the router and when all the lights are back on, turn on the printer, then turn your ipad 2 back on, and then try printing again. Reply back if you still have issues!!
    http://support.apple.com/kb/ht4356
    I am a HP employee.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Recently updated to mountain lion ,2nd printer I was using will not print

    I recently downloaded Mountain Lion.  A 2nd printer I was using (sharing) will not print now.  Any suggestions, appearently there are a lot of things that we have to redo after this?  Was not aware of this before .  We had to reset our mail, etc.  Any one else with these kinds of problems?
    Thank you for any help
    Sandie P

    karengjbs,
    Some Arris routers do not support Multicast, or Bonjour, the service that AirPrint uses. Verify both devices are still attached to your wireless network and Bluetooth is off on your iPhone.  You may also want to power your printer and router off, then power the router on fully, then the printer.
    If you need any assistance with the above steps or verify that the router does or does not support the necessary service, please advise.
    *I work for HP*

  • LaserJet Pro Scans, prints test page but will not print from a file

    I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

    Welcome to the HP Forums JBottensek,
    I see by your post that the printer won't print a PDF document from the one computer.
    I can help you with this issue.
    I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I'm trying to get my new airport extreme to print wirelessly to my samsung clx usb printer and not having any luck.  I downloaded the bonjour print wizard and I know there's a signal going to the printer, but it still will not print?  Any ideas?

    I'm trying to wirelessly print to my samsung printer.  I've downloaded the bonjour printer wizard and could tell that a signal was going to my printer but it still would not print.  Anyone have any ideas?

    You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.

  • HP Color Laserjet CP1215 on XP home network will not print from second computer.

    Win XP SP3 home network with two computers and one HP Color Laserjet CP1215 printer(USB) that is shared.   Computer one prints just fine, but second computer cannot print.
    Print job goes to the queue and says "printing" and stays there for about two minutes and then says "error - printing" and then I have to delete the print job from the print queue.
    Downloaded latest CP1215 print driver and installed it to second computer, added printer just fine.  No errors until the print job enters the queue. Downloaded the CP1215 Diagnostic Utility, but it will not work on second computer.  Have not tried it on first computer when job errors.
    Message Edited by remleys_west on 06-23-2009 10:29 AM
    Message Edited by remleys_west on 06-23-2009 10:35 AM

    The Firewalls are disabled and from my laptop you can view all of the shared
    Folders on the Desktop with the CP1215 attached via USB.
    When I issue the print from my laptop that is on the same network, you see the
    print file show up in the CP1215 print queue of the Desktop the CP1215
    is USB attached to and then disappears about 15 seconds later.  Here is
    how it appears on in the Desktop CP1215 Print Queue before it disappears
    Doc Name            Status      Owner     Pages    Size            Submitted            Port
    E-mail print           Printing      Guest          1      547 KB     2:00pm 08/26/09      USB003
    I've also download/installed the latest drivers.  When I reinstall the CP1215 on my laptop from
    the Desktop, the "PRINT TEST PAGE works from the Laptop but then all print commands after
    that do not work.
    I see from my Google search I'm not the only one having this problem
    ANY IDEAS what to try next? 
    Wes

  • Re: My printer is offline and will not print, How do I fix this?

    I have a deskjet printer model 4260. I recently replaced one of the inkcartridges, prior to that the printer worked.
    Now I can not get the printer on line, no matter what I do. I am able to print a test page with all colors working.
    I am running windows 7.  I believe I have tried everything, like plug and play, to shutting the system down and
    bringing it back on line.
    The router I am using is Linksys it is hard wired
    John

    Hello there! Welcome to the forums John, aka @4603
    I read about how your Deskjet D4260 is showing that it's "Offline", and I would like to offer you a suggestion that should get you back online!
    Click this link and try these steps: 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7
    Best wishes to you, let me know how the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printer connected via WiFi, will not print.

    I have a MacBook Pro (2008) running Yosemite 10.10.1 and it is connected wirelessly to my Canon MP530 printer (using a print server). Everything is connected correctly, but when I send a file to print, nothing happens. I am pretty sure I have the correct driver installed because this identical setup works on my other Mac (2009) also running Yosemite 10.10.1.
    The only thing I can remotely think of is that on the Mac that won't print, it is an older Mac (2008) running Yosemite. On the Mac that wireless printing works on, it is a newer model (2009) also running Yosemite. I suspect it may be a hardware problem, but not sure.
    (and yes, I have also tried the Gutenprint drivers, with no result). I can print from the 2008 Mac using the 2009 Mac as a server, but that's it. I just want to be able to print from the 2009 Mac without connecting it directly to the printer or using the 2009 Mac as a "server". Why does one Mac print wirelessly while the other one will not?
    Any suggestions?

    (1) Mac that prints directly (wireless):
    PS-736C74-U1:
      Status:    Idle
      Print Server:    Local
      Driver Version:    11.7.0.0
      Default:    Yes
      System Printer Sharing:    Yes
      Shared:    Yes
      URI:    dnssd://PS-736C74-U1._printer._tcp.local.
      PPD:    Canon MP530
      PPD File Version:    11.7.0.0
      PostScript Version:    (3010.000) 705
      CUPS Version:    2.0.0 (cups-408)
      Scanning support:    No
      Printer Commands:    PrintSelfTestPage
      CUPS filters:
    Raster2CanonIJ:
      Path:    /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
      Permissions:    rwxr-xr-x
      Version:    11.7.0
    Command2CanonIJ:
      Path:    /Library/Printers/Canon/BJPrinter/Filters/Command2CanonIJ.bundle/Contents/MacOS /Command2CanonIJ
      Permissions:    rwxr-xr-x
      Version:    11.7.0
      Fax support:    No
      Printer utility:    /Library/Printers/Canon/BJPrinter/Utilities/CanonIJPrinterUtility.app
      Printer utility version:    11.7.0
      PDEs:
    CanonIJPDE.bundle:
      Sandbox compliant:    Yes
    (2) Mac that does not print directly, but prints via Mac 1 (wireless):
    PS-736C74-U1 @ Wilda Duncan’s MacBook Pro:
      Status:    Idle
      Print Server:    Remote
      Default:    Yes
      URI:    dnssd://PS-736C74-U1%20%40%20Wilda%20Duncan%E2%80%99s%20MacBook%20Pro._ipps._tc p.local./printers/PS_736C74_U1?uuid=f0407db8-e96e-3ed2-77c1-2c7544c42120
      PPD:    Canon MP530

  • My printer will print an email but will not print a photo that is saved in my photo file. help

    I have a HP Photosmart D110 model.
    It is not printing from any of my photo files but will print from an email page. Please help in correcting this.

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Photosmart Printer 6510 - Black ink will not print

    I have an issue with my printer in that my black ink has stopped printing. Over the last few days I have read through the information on the HP trouble shooting site and this site and my isses is still not sorted. To date I have tried the following:1.  New cartridge (both were genuine HP cartridges)2. Cleaned the print heads3. Removed the cartridge and cleaned all the contact points4.  The ink levels are showing as full.... I am not sure what to try next, cany suggestions welcome! ThanksRachel

    Hi , I see by your post that you aren't able to print in black. I will certainly do my best to help you. I have provided some documents for troubleshooting this issue, some of the steps you may have done already. Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages. 'Incompatible Ink Cartridge' or 'Indicated Ink Cartridge Must Be Replaced' Message Displays on the C... If the issue persists, then do a power reset. An Alphanumeric Code (Example: '0x......' or 'C2......') Displays on the Front Panel When Printing. Disregard the title. If the issue continues, please Contact HP Support for further assistance. Fill in the model number and the form to receive a case number for quicker assistance. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.
     

  • Loaded iWork 08 - Now printer shows "Jobs Stopped" & will not print.

    Everything was working fine then I loaded iWork 08 and now I can't print anything. I have registered the software which didn't help.
    Every time I try to print something the printer software opens up showing everything working, nothing happens and the option to start jobs shows up but clicking that only repeats the process.
    Any help???
    Thanks.

    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x
              1.          To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
              2.          Choose System Preferences from the Apple menu.
              3.          Choose Print & Fax from the View menu.
              4.          Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

Maybe you are looking for