15454 vs 15310 Comparison

Could any expert provide a comparison between the 15454 and 15310? Is the 15310 just smaller (ie like a 6513 vs a 6509?) or do the platforms serve two completley different purposes?

Is the 15310 just smaller (ie like a 6513 vs a 6509?) NO they are not like 6509/6513. In 6509 there are 9 slots and 6513 there are 13.
But in case of 15454 and 15310 we are comparing 6509 with 3750. 15454 is 11RU can be used till 10G (OC192) that too Multiple whereas 15310-CL is 1RU an can have only OC12 speed. Whereas 15310-MA can go upto OC48. So 15310 is a very compact box. Both can provide Ethernet cards will differ number of ports supported.
15454 is a Core box whereas 15310 is an Edge box.

Similar Messages

Export / Reports for STS utilization on Span's between 15454 nodes

So...
I'm looking for a convenient way to keep track of my STS allocation by running reports for our customer circuits, between our various SONET 15454 and 15310 nodes. Ideally, I'd like to be able to tell CTC or CTM to generate a report which shows me how much (and which ones) STS-1's I'm using between various nodes, in a nice concise format; to help me plan for capacity, circuit rolls, and expansion. The report should also include things like % of a particular OC-48 or or OC-192 is used, available, outline of contiguous and non-contiguous STS's, and summary for all my point-to-point circuits utilization.
Currently what I have to do is:
1) Export from circuit-view (in CSV format) for each span, a seperate exported
file or each span, one by one (hoping not to overlook one)
2) Reconcile each Exported file against a spreadsheet that I maintain/update
(about once a week) updating the stats for each span
This way, I "hopefully" have a living document, updated with what bandwidth I have where (and for who), which I can reference in a consolidated way for my entire 15454 network. This greatly simplify's my capacity planing, rolls, and generally just keeping tabs on what and who I have assigned where.
It seem like there should be a simple "Generate Report" feature either whithin CTC or CTM. I should be able to customize it as I want.
Perhaps there is 3rd party software to inject into CTM which will extract such a report.
For all you 15454 guys and gals out there, please help if you know of a solution!!
--Scott

So...
I'm looking for a convenient way to keep track of my STS allocation by running reports for our customer circuits, between our various SONET 15454 and 15310 nodes. Ideally, I'd like to be able to tell CTC or CTM to generate a report which shows me how much (and which ones) STS-1's I'm using between various nodes, in a nice concise format; to help me plan for capacity, circuit rolls, and expansion. The report should also include things like % of a particular OC-48 or or OC-192 is used, available, outline of contiguous and non-contiguous STS's, and summary for all my point-to-point circuits utilization.
Currently what I have to do is:
1) Export from circuit-view (in CSV format) for each span, a seperate exported
file or each span, one by one (hoping not to overlook one)
2) Reconcile each Exported file against a spreadsheet that I maintain/update
(about once a week) updating the stats for each span
This way, I "hopefully" have a living document, updated with what bandwidth I have where (and for who), which I can reference in a consolidated way for my entire 15454 network. This greatly simplify's my capacity planing, rolls, and generally just keeping tabs on what and who I have assigned where.
It seem like there should be a simple "Generate Report" feature either whithin CTC or CTM. I should be able to customize it as I want.
Perhaps there is 3rd party software to inject into CTM which will extract such a report.
For all you 15454 guys and gals out there, please help if you know of a solution!!
--Scott

Convert a circuit from UPSR to unprotect on 15454s(MSPP)

Hi,
we are implementing ONS 15454 SONET(MSPP) network. And Is there any method to convert a UPSR circuit(VT/STS) to unprotect on ONS15454/15310(Rel 6.0) by using CTC/TL1 without service interruption? Appreciate your expert advice.

As Todd indicated, in release 6.0 there is a bridge and roll feature; you can upgrade an unprotected circuit to a fully protected circuit or downgrade a fully protected circuit to an unprotected circuit with the exception of a UPSR circuit. When using bridge and roll on UPSR circuits, you can roll the source or destination or both path selectors in a dual roll. However, you cannot roll a single path selector.
The CTC Bridge and Roll wizard reroutes live traffic without interrupting service. The bridge process takes traffic from a designated "roll from" facility and establishes a cross-connect to the designated "roll to" facility. When the bridged signal at the receiving end point is verified, the roll process creates a new cross-connect to receive the new signal. When the roll completes, the original cross-connects are released. You can use the bridge and roll feature for maintenance functions such as card or facility replacement, or for load balancing. You can perform a bridge and roll on the following ONS platforms: ONS 15454, ONS 15454 SDH, ONS 15600, ONS 15327, and ONS 15310-CL.

BITS Out question on an ONS-15454

I have a user that has a two node 15310CL network that is not optically connected to my ONS network. He needs a PRS level timing source for his network, but there is no external timing source available to him in that building. Can I program the ONS15454 BITS-1 out to provide the external source to his network? My 15454 is configured for LINE side timing.
If this is possible, what would be the Cable pinout be between the 310CL and the 454?
Thanks for any help.
Steve

Steve,
The 15454 can provide a BITS-OUT to the 15310 via the BITS-OUT wire-wrap pins on the back of the15454 Chassis.
The 15310 CL has an RJ-45 connector for the BITS Input with Pin 6 (-) and Pin 3 (+). Here is a link to the user documentation that covers the pinout for the 15310 CL:
http://www.cisco.com/en/US/docs/optical/15000r9_0/15310/sonet/procedure/guide/310a90_dlp0.html#wpxref12757
And Here's the link for the 15454 Pins:
http://www.cisco.com/en/US/docs/optical/15000r9_0/15454/sonet/procedure/guide/454a90_dlp0.html#wpxref12757
Tip = (+)
Ring = (-)
To connect between the two, conect Tip(+) to Tip(+) and Ring(-) to Ring(-)
You will then need to enable the BITS-IN on the 15310 as the Timing source
http://www.cisco.com/en/US/docs/optical/15000r7_0/15310/15310_cl_ma/procedure/guide/3107ndtu.html#wp108999
And the BITS-OUT on the 15454:
http://www.cisco.com/en/US/docs/optical/15000r9_0/15454/sonet/procedure/guide/454a90_dlp0.html#wpxref98779
BITS-1 Out/BITS-2 Out—Define the timing references for equipment wired to the BITS Out pins on the backplane. BITS-1 Out and BITS-2 Out are enabled when BITS-1 and BITS-2 facilities are put in service. If Timing Mode is set to External, choose the OC-N card used to set the timing. If Timing Mode is set to Line, you can choose an OC-N card or choose NE Reference to have the BITS-1 Out and/or BITS-2 Out follow the same timing references as the NE.
Aaron Reed
Carrier Escalation Engineer

Report for Comparison of Material Qty

Hi All,
I need to Develop an Interactive report for Comparison of Material Qty. ordered through Purchase requisition, ordered material through PO and corresponding Material Receipt report.
Can Someone Give a brief description about this & fields tcode & tables regarding this report.A sample code would be much appreciated.
Thanks & regards,
Ravi S

To get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps.

How to do comparison in a loop.

Hi all,
TYPES: BEGIN OF ZROUTE,
         VBELN TYPE VBELN,
         ROUTE TYPE ROUTE,
        END OF ZROUTE.
DATA : IT_ZROUTE TYPE STANDARD TABLE OF ZROUTE,
         WA_ZROUTE TYPE ZROUTE.
      LOOP AT I_XVTTP_TAB INTO LW_XVTTP.
        WA_ZROUTE-VBELN = LW_XVTTP-VBELN.
        SELECT SINGLE ROUTE
                INTO WA_ZROUTE-ROUTE
                FROM LIKP
                WHERE VBELN = LW_XVTTP-VBELN
        APPEND WA_ZROUTE TO IT_ZROUTE.
     ENDLOOP.
results from IT_ZROUTE
vbeln    route
1111     A
2222     B
I have some problem in with the code below. I tried to collect vbeln and route into IT_ZROUTE.
However, after i've got the result, i want to do distiguish between the route.
If route A ne route B, then display an error messages.
My problem is, how do i compare the record by looping IT_ZROUTE? if i set into a temporary variable, the value will always change and i have prb in doing the comparison. eg:
loop it_zroute into wa_route.
   zroute = wa_route-route. "set into a variable
if zroute = wa_route-route
   "display error message
endif.
endloop.
Could anyone give me some tips to enhance my code? Really appreciate your help.

Hi SW,
You should never use SELECT statement inside LOOP statement as it will affect performance of the program. Use FOR ALL ENTRIES for the same.
TYPES: BEGIN OF ZROUTE,
VBELN TYPE VBELN,
ROUTE TYPE ROUTE,
END OF ZROUTE.
DATA : IT_ZROUTE TYPE STANDARD TABLE OF ZROUTE,
WA_ZROUTE TYPE ZROUTE.
************Addition STARTS***********
data : I_XVTTP_TAB_temp like I_XVTTP_TAB occurs 0 with header line.
data : begin of likp_itab occurs 0,
            vbeln like likp-vbeln,
             route like likp-route,
          end of likp_itab.
I_XVTTP_TAB_temp[] = I_XVTTP_TAB[].
sort I_XVTTP_TAB_temp by vbeln.
delete adjacent duplicates from I_XVTTP_TAB_temp comparing vebln.
select vbeln
          route
    into table likp_itab
   for all entries in I_XVTTP_TAB_temp
where vbeln eq I_XVTTP_TAB_temp-vbeln.
if sy-subrc eq 0.
sort likp_itab by vbeln.
endif.
************Addition ENDS***************
LOOP AT I_XVTTP_TAB INTO LW_XVTTP.
WA_ZROUTE-VBELN = LW_XVTTP-VBELN.
****************Not required
SELECT SINGLE ROUTE
INTO WA_ZROUTE-ROUTE
FROM LIKP
WHERE VBELN = LW_XVTTP-VBELN
****************Not required
read table likp_itab witj key vbeln = LW_XVTTP-VBELN binary search.
if sy-subrc eq 0.
WA_ZROUTE-ROUTE = likp_itab-route.
endif.
APPEND WA_ZROUTE TO IT_ZROUTE.
*********Add
clear wa_zroute.
*********Add
ENDLOOP.
Please explain the later part again I am not clear with requirement.
Regards,
Anil Salekar

Problems with string comparison using

I have a problem using the > and < comparison operators.
When the xsl:if test uses numeric values the comparison works OK. If the
test uses string values it always returns a false result.
The style sheet below shows an example (which should run against any
XML doc with a root element)
Note - the spurious
tags are just for debugging- I write the
output to an HTML page and IE happens to recognise them
even though the rest of the HTML tags are missing !!
<?xml version="1.0" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
<xsl:template match="/">
<xsl:for-each select="*">
Starting numeric test :
<xsl:if test="(1 < 2)">
In Test, ID= <xsl:value-of select="generate-id()"/>
</xsl:if>
Finished numeric test :
Starting alpha test :
<xsl:if test="('a' < 'b')">
In Test, ID= <xsl:value-of select="generate-id()"/>
</xsl:if>
Finished alpha test :
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
null

Having looked at the XPath spec I believe what I am trying to do (compare strings with gt and lt type tests) is not supported. The spec indicates that they can only be used for node sets or numerics. Presumably the processor is attempting to convert the values to numbers but evaluating them both as NaN (not a number). Can someone confirm this.
I find this restriction quite strange, is this a situation where an extension function is required ? If so can someone point me to some (Java) examples.
null

Urgent : Help required for logical comparison of two 2GB files.

Large files need to be compared depending on Business logic. No byte to byte comparison to be done. It would require reference of data written at the start of the file at some other later part of the file too while comparing two files. File needs to be stored in memory while comparison is done. Kindly suggest some way out which would give best performance. Memory limitations are 256 MB RAM.

File needs to be stored in memory while comparison is done.
Memory limitations are 256 MB RAM.You have 4 GB of data. You have 256 MB of RAM to put it in. Obviously one of those two assumptions has to be changed. By the way, what is the XML connection for this question?

Features comparison of SharePoint Foundation 2010 & Office 365

Hi,
I there any documentation/chart or table comparison of features between Office 365 and SharePoint Foundation 2010?
I can only search comparison between office 365 and SP Foundation 2013.
Thanks!

See http://technet.microsoft.com/en-us/library/sharepoint-online-service-description.aspx
Towards the bottom it has the on-prem feature sets, but has all of the online and onprem feature sets listed on this page.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

The Comparison of IIS on Windows Server 2012 R2 and Websphere application Server on R6 or AS400

Customer is looking for the internet application solution, and they would like to know the difference/ comparison of IIS on Windows Server and WAS on Linux. I know it's hard to answer, but is there any data/document/information so that we could convince
customer to use IIS instead of WAS on R6/AS400?

Hi,
I could not say which one is better.
The advantage of IIS, you could refer to:
http://www.microsoft.com/web/platform/server.aspx
Similar thread has been discussed:
Windows/.NET/ASP.NET/IIS/SQL Server vs. Linux/WebSphere/Java/Apache/Oracle information
https://social.msdn.microsoft.com/Forums/en-US/9d3b975d-42cb-48fc-94c4-a0394d9f34e6/windowsnetaspnetiissql-server-vs-linuxwebspherejavaapacheoracle-information?forum=architecturegeneral
Meanwhile, i think you could ask in IIS forums:
http://forums.iis.net/
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

XL Reporter Report for comparison of last month and current month sales

Hi,
Our management requires an MIS report for comparison of sales in revenue and in terms of units for the last and the current month todate.
Is there a way to view this data for both the months together, without any user input?
Best Regards
Jyoti

Jyoti,
I'll try and explain the XLR Report you'd need for this. This is isn't the best way to explain something like this, but I'll give it a shot.
- Put an expansion on Row 8 and choose all Items (*), click Apply
- In A8, put ItemCode
- In B8, put Item Name
- In C8, put Sales - A/R Row Total
- In D8,put Sales - A/R Row Total again
- Setup a Parameter
    - Call it Period
    - Dimension
    - Financial Period
- In Column D, put a column Summary and click into Financial Period
    - click the button to open the selection window
    - click to the parameter tab
    - select your parameter and click OK and click Apply
- In Column C, put a column Summary and click into Financial Period
    - click the button to open the selection window
    - click to the parameter tab
    - in the bottom right corner, add a "-1"   it should look like this @Period-1
    - click OK and click Apply
- In C7 and D7 - choose Financial Period Code from formula builder
             (so you can see the period code at the column header)
This will show sales by item in the current Period (column D) and previous Period (column C)
Hope that helps and at least gets you going. I can't guarantee those are perfect instructions from memory.
Brad Windecker
[Omega Business Solutions|http://www.omegagroup.com]

Target/Actual Comparison

Dear expert,
I have analysis one of my Target/Actual Comparison report for a Production Order.
I have the target cost displaying well in the report comparing to the actual.
However, for Cost of Goods Manufactured line item is display value 0.00 and not displaying any correct value. It should display the actual quantity X Cost Estimate.
I have run the cost estimate for the finished goods without error.
Can someone give me a hand on this?
Thank you so much.

Hi Christian,
Sorry, my earlier question is incompleted.
I am missing Target cost for Cost of Goods Manufactured in the Target/Actual Comparison Report.
The actual figure is good.
Just missing the Target cost for COGM.
Thank you. Awaiting for your reply. Appreciated.

Amount of Lamda supported on 15454

I have beed receiving conflicting information on the amount of lamda's a 15454 can support on the DWDM environment. I sometimes hear 32 other times I hear 40. I might be related to the version of software.

There are multiple options; 40 channel and 32 channel mux/demux filters.
From what I can gather from the data sheet, the 15454 MSTP will support 80 C-Band and 32 L-band channels (112 channels total).
MSTP Data Sheet
<http://www.cisco.com/en/US/prod/collateral/optical/ps5724/ps2006/ps5320/product_data_sheet09186a00801849e7.html>

Extremely slow performance in comparison to RDC-based report

Today our application uses the Crystal Reports RDC. In the last
ten years we have made good experience with Crystal Reports.
In the next few months we want to migrate our application to
JAVA.
Because the reports offer a great reuse-potential, we would like
to implement them via CR4E.
But during the first benchmark tests we made a very bad experience.
Running (Printing) in CR4E the reports needed from 20 up to 480 percent
more time in comparison to the RDC-based reports.
When using POJOs need from 25 up to 570 percent more time.
When printing the reports from within the CR2008 designer there is
no performance difference.
The reports have from 4 to 82 pages.
We didn´t expect such a huge performance difference.
Is CR4E in general slower than the RDC-based Crystal Reports?
Or are there any parameters in CR4E in addition to the RDC-based
solution for tuning the reports?
Edited by: Rainer Graedtke on Nov 9, 2009 2:44 PM

Hi Ted,
thanks for the fast response.
Is there another "datasource option" with better performance than POJO?
In the upcoming JAVA-version of our application we would like to "feed"
our reports from memory, not from the underlying database.
One more statement concerning our performance problem:
In our reports we make extensive use of subreports.
Each report has the minimum of two subreports, one for the pageheader,
one for the pagefooter.
This is necessary because we have changing headers and footers
depending on the contents of the details.
The report with the largest performance loss contains 29 subreports!
RDC-based it prints in 10 seconds, Java-based we need over 50 seconds.
Is there any suggestion how to improve the performance of our reports in
JAVA/CR4E other than reducing the number of subreports?
Another question concerning the keycode-problem:
We have designed the reports in the CR2008 Designer and we want to run
them under CR4E. Is this a valid approach?
Sincerely Rainer
Edited by: Rainer Graedtke on Nov 10, 2009 10:51 AM

Creating query on Bex - Quaterly comparison for statistical & Actual

Hi All,
I would like to create a query for 'Quarterly comparison for statistical & Actual periods'.
My Key Figures should be
1) Plan 1st Qtr (Fiscal year, Period: 1 to 3, Value type : 1(Plan), Version : 0(Plan/actual), Valuation View: actual Value).
2)1st Qtr (Fiscal year, Period: 1 to 3, "Value type : 4(Actual),11(Actual statistical)", Version : 0(Plan/actual), Valuation View: actual Value).
3)Var 1st Qt (Plan 1st qtr - 1st Qtr)
same thing for 4 Quaters. finally with
4)Plan Year (Fiscal year, Period: 1 to 12, Value type : 1(Plan), Version : 0(Plan/actual), Valuation View: actual Value).
I created a structure and created key figures with selections and formulas as required. But I did not see any data when I ran this query.
The report was generated with 'no applicable data'.
I need to create this query with plan 1st Qtr, Ist Qtr, Var 1st Qtr, Plan 2nd Qtr, 2nd Qtr, Var 2nd Qtr, Plan 3rd Qtr, 3rd Qtr, Var 3rd Qtr, Plan 4th Qtr, 4th Qtr, Var 4th Qtr, Plan year. key figures.
Please let me know how can I create this query with these Key Figiures.
Any help would be appreciated. Please respond with the reply.
Thanks,
Aparna.

Hi
The best way is then to run a report with your KF without any restriction, and the different chars in the drill down: Fiscal year, Period:, Value type, Version , Valuation View
Then you can check that you have some information with the combination of values of your chars:
Fiscal year, Period: 1 to 3, Value type : 1(Plan), Version : 0(Plan/actual), Valuation View: actual Value.
If you find a actual Value in the fiscal period you are looking at, for the period 1 to 3, for the Valuation type 1, for the version 0, then create arestricted KF by adding the restrictions one at a time....You moght discover why you do not get the results
PY

15454 vs 15310 Comparison

Similar Messages

Maybe you are looking for