16:9 aspect radio or not !?

Dear ALL,
I do a lot of tv(1.78:1) and movie(1.85/2.35:1) file convert. But the result are not very nice. Then I check the spec. of ipod touch. it is 480x320 which is around 1.5:1. OMG it is not 16:9 aspect ratio. That one make me a little disappointed why it is only support 3:2 aspect ratio (which is DC aspect ratio) ........ strange !!!
ciao,
KK Lin
P.S. look at ipod nano & classic it is 320x240 (aspect ratio 1.34:1 which is 4:3). But right now most of video media are going to 16:9 ...... that is another strange !!!
Message was edited by: Kk Lin
Message was edited by: Kk Lin

It doesn't really matter since you can either watch the videos on the iPT in their native aspect ration, or you can force it to fill the screen and cut off the sides. Not everything is in the same aspect ratio, so no matter what one they chose, somebody wouldn't be happy!

Similar Messages

  • Photosmart c309a- 'The wireless radio is not functioning, contact HP support'

    My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
    Wireless on                    PASS
    Wireless working         FAIL
    and everything following that stated as 'not run'.
    Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
    So the question is, is this a hardware fault, and if so what can be done about it?

    Hello,
    Yes, it is an hardware issue and indicates that the Wireless card is not functional.
    Please call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the white star under my name.
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • ITunes RADIO is not working.  "iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again." Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so -  iTu

    iTunes RADIO is not working.
    “iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
    iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
    Simply put, firstly, I can't connect to the internet when I click on Radio.  People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
    Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
    Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
    Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
    Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
    Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
    Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
    ===============================================================
    NOTE:  no password for iTunes exists in my Keychain. Is this a problem?
    Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
    Apple store id It works via direct internet connetion but not through iTunes.  Very strange.
    ===============================================================
    FYI, Hardware Overview:
      Model Name:                       MacBook Pro
      Model Identifier:                 MacBookPro8,2
      Processor Name:               Intel Core i7
      Processor Speed:               2 GHz
      Number of Processors:    1
      Total Number of Cores:    4
      L2 Cache (per Core):         256 KB
      L3 Cache:                            6 MB
      Memory:                              16 GB
      Boot ROM Version:            MBP81.0047.B27
      SMC Version (system):      1.69f4
      Serial Number (system):   C0*******F8V
      Sudden Motion Sensor:
      State:   Disabled
    Intel 6 Series Chipset:
      Vendor: Intel
      Product:            6 Series Chipset
      Link Speed:       6 Gigabit
      Negotiated Link Speed:           6 Gigabit
      Description:      AHCI Version 1.30 Supported
    M4-CT512M4SSD2:
      Capacity:           512.11 GB (512,110,190,592 bytes)
      Model: M4-CT512M4SSD2                         
      Revision:           040H   
      Serial Number: 0000000012330912E75A
      Native Command Queuing:    Yes
      Queue Depth:   32
      Removable Media:        No
      Detachable Drive:        No
      BSD Name:         disk0
      Medium Type:      Solid State
      TRIM Support:     Yes
      Partition Map Type:     GPT (GUID Partition Table)
      S.M.A.R.T. status:         Verified
      Volumes:
    disk0s1:
      Capacity:           209.7 MB (209,715,200 bytes)
      BSD Name:         disk0s1
      Content:            EFI
    disk0s2:
      Capacity:           511.25 GB (511,250,432,000 bytes)
      BSD Name:         disk0s2
      Content:            Apple_CoreStorage
    Recovery HD:
      Capacity:           650 MB (650,002,432 bytes)
      BSD Name:         disk0s3
      Content:            Apple_Boot
      Volume UUID:   600737FB-7A29-3BAE-859E-CBFE2E90C39A
    <Edited by Host>

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • My itunes radio is not working on my microsoft compuer. I downloaded the new itunes and it says there is an error in the itunes store. I am not sure what is going on?

    My itunes radio is not working on my microsoft computer. I downloaded the new itunes but it says there is an error in my itunes store. What do i do to fix the problem?

    Try starting Aperture with the command and option keys held down.  You'll get 3 options.
    Try each, starting at the top, in order, checking after each to see if it fixes the issue.

  • Help, report says wireless radio is not functionin​g contact HP suport***

    Help, report says wireless radio is not functioning contact HP suport***
    wireless on        pass
    wireless working   FAIL
    This question was solved.
    View Solution.

    Reset your C7280 by turning it off, hold the # and 6 keys while and a bit after turning it on.
    Now, run a Wireless Network Test from the front panel.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Wireless radio is not functionin​g

    I keep getting the message wireless radio not functioning on a C309a.  I have tried all the suggestions that are posted.. Is there any other way to fix wireless radio.  I was on the phone with HP for 3.5 hours tiring to resolve the issue and nothing was resolved.. My printer is just out of warranty.   Is there anything else that can be done or is the printer used wirelessly junk? I am able to connect thru USB for now.. but really need my wireless to work.  Can anyone help Please!!

    jcarol19 wrote:
    Mine too!  I also have a C309A printer and have spent over 2 hours on line with HP trying to fix the problem and for a moment it was fixed.  But then the next day, it wouldn't work again so I ran a wireless test and it said the wireless radio is not working.  This would mean that the radio installed in these printers are junk and need to be replaced.  I would suggest you fight "city hall" by sending your complaint to upper managment.  The last thing they want is bad publicity, trust me I know.
    Don't waste your time, I tried it....they could care less about bad publicity....all I got out of it was a headache from the phone conversations and now having my posts deleted.  They insist this is not a recurring problem and have gone so far as to say that wireless radio failures are RARE!!!!!!!

  • Wireless radio is not functionin​g - Photosmart c4599 All-in-one

     I have had my printer connected to my home wireless network.  The printer stopped working.  When I run the wireless network test report it says "The wireless radio is not functioning.  Contact HP Support.  According to the HP web site, the printer is out of warranty.  Is there anything I can do to get the wireless working again via a hard reset or is this something a technician will need to fix?  If out of warranty, is the cost to fix really worth it?

    If this message is appearing on the Front Panel of the printer, then it is an indication of a hardware problem that has developed.
    It sounds like the wireless card has gone bad in the printer and this is not something that a reset would be able to address.
    If the printer is out of warranty, then your best option is to replace the printer. HP Tech Support has many options available to you, such as the Upgrade program.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Wireless Radio is not functionin​g on Photosmart C309a

    VERY FRUSTRATED right now....I've read similar posts about this and wonder if there is a significant flaw with the wireless radio in this model that HP will not acknowledge....
    I've got a 13 month-old (Still shiny new) Photosmart C309a that is just past the warranty date.  It really hasn't been used much at all -- just basic household use.  I am totally kicking myself since we started having problems with the wireless network disconnecting about 3-4 months ago (when it was still under warranty).  It was a sporadic issue, and I was always able to do a reconnect by doing a combination of unplugging it and then using the "Wireless Setup Wizard" to reconnect.  Now it cannot find the wireless network at all.  The Wireless Radio is "on" and when I run the Wireless Network Test I now get "The Wireless Radio is not Functioning.  Contact HP Support".  My wireless network seems to be working just fine for everything else, so I truly think this is a printer problem. 
    Anyhow, because it is just past warranty, we have called HP support twice and have not gotten much help either time.  They do not seem to care and tell you they will have to charge you for the help?!? 
    Am I supposed to replace a perfectly good printer since the wireless doesn't seem to connect?   Is there another way to fix this?  Is there a way to just replace the wireless radio and not the whole printer (and is that advisable)?
    I would greatly appreciate any help!

    This seems to be an issue with HP wireless printers. The Photosmart C309a is my second all in one in 5 years. Same as many others, my wireless went dead 13 months after purchase with very light home use. Last one had wireless go dead same way and had to use it wired to the network for 4 years.(except for wireless, old printer still works fine, had to upgrade for Windows 7)
    Seems HP should correct this issue or at least quit advertising wireless printers when the wireless dies and cannot be fixed.
    No one should have to purchase a new all in one printer to have wireless when everything works except the wireless after the first year. The printers cost way too much for cheap wireless with a short lifespan. If HP does not do a recall on these printers for the wireless, I'm going to purchase a different name brand next time... Starting to look up reviews now on other printers.

  • HP Photosmart c309a printer. install msg is 'wireless radio is not functionin​g'. troublesho​ot?

    My HP Photosmart C309a printer stopped printing.  i uninstalled & re-installed the printer and software.  on the reinstall, a message popped up that "wireless radio is not functioning'" how do i troubleshoot this?

    This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
    Do it soon.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can't detect or connect to my wireless network - Diagnostics says wireless radio is not functioning.

    Couldn't print; computer said printer was not connected.  Tried to reconnect to wireless network, couldn't connect.  Ran the Wireless Network Test Report, which said "the wireless radio is not functioning.  Contact HP support."

    Follow the instructions in the manual to reset the printer back to Factory Defaults. Now check the wireless radio status again. If the same, use the front panel to navigate and attempt to enable the wireless radio. Again, check the status after. If it still says it is not functioning, the wireless radio is indeed defective.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • OfficeJet Pro 8500 Wireless Radio is not functioning

    I had been using Office Jet Pro8500 Wireless for about 5 months.  All the sudden, I lost the network connection.  I had been in contact with HP Support and waiting for a call back from them.  We had tried to reset the network connectivity (unplug the computer, and press 6 and #) but not successful.  I am connected to my wireless network on my computer. I have 2 computers (one Windows 7 and the other Windows XP).  I use NetGear for my wireless router, 64 bit with WEP.
    I have been reading some messages in this forum, do I have a bad wireless radio in the printer?  I have been spending close to 2 hours with HP Support doing various thing, but no luck.  They suppose to call me back 1 1/2 hours ago but no one had called yet.  :-)
    Any suggestion?

    Hi,  thank you.   Yes, I have done that.  It says:  "The wireless radio is not functioning.  Contact HP support. " 
    Diagnostics Summary:
    Wireless On - Pass
    Wireless Working - Fail.
    Network Name (SSID) Found - Not Run
    everything else below here are "Not Run" . 
    Downlink count - 1
    I am on the phone with HP Tech Support.  I used your suggestion to tell them that I believe that I have a failed radio module in my printer.  They are going to send me a "refurbished" basic printer.  They assured me that the refurbished is a brand new unit, never used with any customer.  It is an overstock printer which they open and take out any accesories and ship it to me.  Hope this will work.  Hope this is true.
    PS:  HP asked me to pay for expedite shipping but I politely asked that they will waive the cost because it is a defective unit.  They did.  But I have to give my CC for "collateral" in case I do not return my defective unit.
    Waiting now for that replacement printer.
    Thank you for your assistance.

  • Officejet pro 8500A wireless radio is not functioning

    Have an OfficeJet Pro 8500A.  Wireless connection stopped working.  Tried restarting printer, router, and computer per troubleshooting suggestions in manual.  No joy.  Wireless Network Test Report gives a 'Wireless Working' status of 'FAIL'. Troubleshooting results at top of report says "The wireless radio is not functioning. Contact HP Support." 
    I found a solution to this problem in the forum for a C7280.  It is to reset the printer by turning it off, and holding the # and 6 keys while and a bit after turning it on.  Later on, there is a comment by another user saying the reset solution also works for the Officejet 8500. 
    O.K. so I'd like to try reseting my printer, but don't know how to do it.  There are no "keys" on this model.  I've searched through the user guide (searched on the term 'reset' in the PDF version) with no results.  Can anyone help by either telling me how to use the reset feature on the OfficeJet Pro 8500A, or another solution to the wireless radio not functioning problem that I can try?
    Thanks,

    Thank you for your suggestions.  I appreciate your help.
    I had previously verified that the wireless radio was on.  The wireless radio test report confirmed it was on.
    I had not used the network settings reset function as I was focused on looking for a "printer reset" capability.  Based on your suggestion I used the network settings reset and then printed the HP Network Configuration Page.  This confirmed the settings had been reset.  However this test also checks for all available 802.11 networks.  The report shows the number of networks discovered as 0.  Based on this, I'm assuming the wireless is still not working.

  • Deskjet 3050A - wireless radio is not functioning

    I cannot connect my Deskjet 3050A-J611g on my wireless network.   In attempting to set up the network I get the message: "The wireless radio is not functioning.  Contact HP support".  The troubleshooting information does not appear to address this problem

    ATTENTION The wireless radio is not functioning.  Contact HP support
    diagnostic results
    >wireless 
                              --wireless on                                                                                 pass
                              --wireless working                                                                fail
                              --signal quality                                                                              not run
    >connectivity
                              --connected                                                                                    not run
                              --disconnect count total                                                              74
                              --disconnect count (last hour)                                                    0
                              --disconnect count (last 24 hours)                                            0
    >network      
                              --network name (SSID) found                                                     not run
                              --other networks detected matching your networks name no
                              --wireless networks detected                                                        0
    >settings    
                              --printer settings consistent with wireless router settings not run
                              --no filtering                                                                                      not run
                              --channel                                                                                            not run
                              --security                                                                                           not run

  • How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?

    HP Photosmart Prem C410a All-in-One
    Windows 7 64-bit
    Wireless Radio is not working
    Trying to change from USB to wireless setup
    purchased at Staples on 8/19/2010 - means warrenty has expired

    With the printer ON, unplug power from the back of the printer for 30 seconds.  Does that reset the radio?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • On my printer it tells me that my wireless radio is not functioning. Also says to contact hp suppor

    printers wireless radio is not functioning

    This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • I have connected my new Onkyo TXNR626 to new Apple TV.  No Sound

    I have connected my new Onkyo TXNR626 to new Apple TV.  I am not using video.  AppTV connected to receiver via optical digital audio cable.  Onkyo remote controls AppleTV on my iMac.  Wireless set up and connected.  No audio coming from receiver.  Sp

  • PC to Mac mini, help please

    Hi, I'm still new to Mac and even newer to things like networking. I have a PC that has over 800 songs that I want to transfer into my Mac mini before my iPod Shuffle arrives through the mail. The reason is the many problems that the Shuffle has when

  • In Search of ultimate G5 1.8 powerPC MOD/UPGRADE??

    I was in search of maximizing my G5 without having to purchase a new G5. I just read a lil something on solid state SSD drives. Now here is what i am trying to acomplish. I am running PROTOOLS 8.0 with a 002 digidesign interface. Im trying to run my

  • Where is Monitor Serial Number

    I can not for the life of me locate the monitor serial number? I have tooled thru ASP and looked for the number on the LCD itself. Could someone clue me in. Thanks

  • Working with checkbox

    Good day everyone, im new to Apex and was doing just fine until i got stuck in this situation: - I have tables A, B and C, where B is the relationship between A and C; - I've created page 1 with a report of A, where the user selects 1 entry; - Page 2