16:9 defaults to 4:3

Using Elements 7, video clips shot in 16:9 default to 4:3 when media is gotten. The good news is that I found the setting once to change that. The bad news is that I cannot remember where!!!
TIA
Lauren

right click on footage in timeline > show properties  - properties panel will come up on RHS,  pick motion > scale, move slider to 133% - this will zoom the clip in to fill the screen and you will lose a little off each side of your clip or you can move the position of the clip (using the position number sliders above "scale") so that the parts of the clip you want seen are there if this causes you to lose important image info that is on the sides.
OR
just click on the image in the preview frame and you will get the resize handles (similar to resizing images etc in Word or any other software) that you can click and drag out to suit the size of the frame - you can also move the image by clicking in it and dragging it to how you want it - use the preview frame to see what will be in final movie.

Similar Messages

  • Default Value is not getting displayed in SUN ONE Ldap

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
    We need the default value to run our applicatin. Can anyone help me for this issue
    Regards,
    K. Senthil Kumar

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • NULL and default!!

    hi,
    I have created a table as below.
    CREATE TABLE student
    (      Rollno      CHAR(8),
         Name          VARCHAR2(20),
    Fees          DECIMAL(12,2) DEFAULT 100.00
    can someone please explain the effects of the following insert statements.
    a] insert into student values('c123','Patrick');
    b] insert into student values('c123','Patrick',NULL);
    Will both of them have different effects on the values entered into the table? And what will be entered into the columns in both the cases.
    Message was edited by:
    user593212
    Message was edited by:
    user593212

    SQL> CREATE TABLE student
      2  ( Rollno CHAR(8),
      3  Name VARCHAR2(20),
      4  Fees DECIMAL(12,2) DEFAULT 100.00
      5  );
    Table created.
    SQL> insert into student(rollno,name) values('c123','Patrick');
    1 row created.
    SQL> select * from student;
    ROLLNO   NAME                       FEES
    c123     Patrick                     100                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to get ALL values as default for  a drop down box in JSF

    Hi,
    I have a drop down box in JSF page which retrieves values from LOVCache.java. I have values like Company, Client, User, ALL in the drop down box.
    By default blank value is selected for the drop down box. I want to make ALL(which retrieves data for all the values) as default value for the drop down box.
    Could any body help me? Any help must be appreciated.
    Thanks,
    Aseet

    Thanks Nikhil. But I am fetching the values from the LOVCache.java.
    I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
    I mean to say can I write
    unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
    where LOVCache.entityTypeSelectionList is used to populate the drop down box.
    Regards,
    Aseet

  • SRM 5.0 - how to change default password?

    Hello,
    Am trying to install SRM 5.0 Oracle 10g as the DB. In the instllation doc of SRM 5.0 a default password is given to connect to the database and I see the encrypted password is in the jdbc properties. How can we change the default password? How do I get the encrypted value?
    Any help is appreciated.
    Thanks

    Propblem resovled, find the corresponding function group and screen, then change the translation.

  • ACS 5.3 Default Backup Password

    When doing a backup on any of the ACS 5.x appliances by default the backup is encrypted with PGP. What password is used for that? Is it configurable?

    It is not configurable and that information wasnt made public. However, when you restore it should be able to decrypt it just fine.
    You can try opening a TAC case but when I was in TAC wasnt able to find that key either.
    Thanks,
    Tarik Admani
    *Please rate helpful posts*

  • How to change the default JET (JumpStart) password

    I am using JET (Jumpstart Enterprise Toolkit) to jumpstart my servers. The default password, boajrOmU7GFmY, is saved in a encrypted form in jumpstart.conf. I want to change it, how do I know the encrypted form of my new password?
    Tom

    Usage: orapwd file=<fname> password=<password> entries=<users>
    where
    file - name of password file (mand),
    password - password for SYS and INTERNAL (mand),
    entries - maximum number of distinct DBA and OPERs (opt),
    There are no spaces around the equal-to (=) character.

  • Does iTunes have a default password for initial encrypted backups?

    I have an iPhone that was connected to iTunes for the first time today.  It is a company device and IT has set a policy to require backups to be encrypted.
    When I first plugged the phone in, iTunes automatically did a backup as it had never seen the device before.  Due to a software issue, Apple recommended that I do a restore to factory settings and then restore from backup, so once the initial backup was completed, I performed the restore to factory just fine.  However, when I attempted to restore from backup, I was prompted for a password even though I was never prompted for a password when iTunes created the backup.  I have tried every password I can think of including my company domain password, iTunes password, iPhone passcode, etc...etc...to no avail.
    Does anyone know if there is some default password that iTunes using when doing an initial backup without prompting the user for a password?

    Caronold -
    I have the same problem when i updated to iOS6  3days ago from iOS5.1.1. I've tried every passwords i can think of but NO luck.
    Even the folks at genious bar said : good luck!!
    A Third party software that can decrypt?

  • How to change default open and close effect in JavaFX TabPane

    I'm interested how I can change the default effect of closing and opening a tab in JavaFX TabPAne. I found that this can be configured by using:
        tabPane.setEffect(Effect ????);
    But which effects are available?

    Hi Lionate
    Welcome to the forum.
    Make a document to your liking.
    Change the Body style and any other styles in :
    +Menu > Show Styles Drawer > click on the little triangle next to Body > redefine Style from Selection+
    Capture the page:
    +Menu > Format > Advanced > Capture Pages… > Name it > OK+
    +Menu > Format > Advanced > Manage Pages… > Delete other Sections/Pages > OK+
    Save as a template:
    +Menu > File > Save as Template…+
    +Menu > Pages > Preferences > General Preferences > For New Documents > click Use template: > Choose > browse to the template above+
    Peter

  • Spry Collapsible panel - open and closed default question...

    I am using a Spry Collapsible panel in a vertical nav menu (DW CS4) and it's in a template for my site. I want it to be closed as default on the Home page, but when a visitor clicks to open it and selects their option, I would like it to remain open on the selected page - Is there a way to do this?
    Thank you all!
    Aza

    Check out the examples on this page: http://www.spry-it.com/examples/spry-widget-cookie-history/#collapsiblepanel

  • Questions on default print quality and print order

    I recently upgraded to CS 5.5, a clean install on a new Mac running 10.7. I've found two issues regarding printing from both Acrobat and InDesign:
    In both programs, if I go directly to print (command-P, then hit OK without changing settings), documents will print at my printer's default setting, which is for a high-quality photo on glossy paper. (I haven't figured out yet how to change that default.) I want it to print to my faster standard quality  setting, which is generally also the "last-used" setting. I can of course go into printer settings to fix -- each time I do that, my standard setting is already set in that window -- but I have to make that move every time I print.
    Previous versions of both programs (CS3) automatically went into the last-used or standard setting. How can I get that back?
    Also, print order hasn't been working as it did in CS3. Documents print first-page-first in CS 5.5, unless I check "Reverse order"; in CS3, docs printed last-page-first automatically, without checking any additional box, making documents easier to collate. Also, on many documents, "Odd pages only" prints the even ones, and vice-versa.
    How can I get the automatic reverse order and correct odd/even back in Indesign 5.5 and Acrobat X Pro?

    Hi Davis,
    Well, if you are able to log on the BPS application (thus, a Web Interface if I'm not mistaken) then it means that some user is logged on the ABAP-side. It is either a "personal" user or a technical (common) user, that is used for anonymous access.
    You will certainly be able to track down this user with the SM04 transaction.
    You should be able to add a button to the BPS page. One idea would be to call an URL with an ICF service behind that will be able to process the parameters contained in this URL.
    It will be this very ICF service that will call the BAPI.
    Try these links
    http://help.sap.com/saphelp_nw04s/helpdata/en/55/33a83e370cc414e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ea8db790-0201-0010-af98-de15b6c1ee1a
    Hope this helps.
    Best regards,
    Guillaume

  • Will any mail apps open to the inbox by default?

    I have been using computers for decades...and have had my iPhone for a few years now. It was only a few days ago that I got my first iPad and was surprised by the "feature" that all of the mail apps seem offer...
    I am talking about opening the app to the last email you were looking at. I tried a few different apps and they all seem to offer the same thing.
    Why does it seem to be an iPad thing to make you go to your inbox instead of having it be the first thing you see?
    Can anyone direct me to an app for the iPad that when I open it, I will see my inbox?
    Maybe it's just me but I don't want the contents of an email being displayed on my screen until I choose...who knows who will be looking over my shoulder when the app is opened.
    Thanks in advance for any help you can send my way.
    Scott

    This answer does not help me at all.
    It does not address my initial question...not even a little bit.
    Me mentioning someone looking over my shoulder was just an example.
    The point is, I want an app that opens by default directly to the inbox.
    If you have anything useful to contribute, please do.
    Scott

  • Power view in SharePoint - Changing the default save location?

    Is it possible to change the default location when saving Power view back into SharePoint?
    Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
    When saving their reports, the default location is always the same location where the data source is. This is described here also:
    https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
    Quote from the link: "The first time you save the
    report, the default location will be the folder where the model is located."
    Ok, understood. But is it possible to change this???

    Hi again
    Ouch! Not the network!
    One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
    Best practice at this point is to keep projects on your local C drive when you make edits.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • How can I change the default "from" email account on my iPad/iPhone in IOS 8.2?

    I currently use my phone & pad for business and personal use.  My emails should come from my business account but they're coming from my Yahoo account.  How can I change it without having to manually change each email?  I've checked online but I don't see settings/mail,contacts,calendars/default account in this new revision of software.
    Thanks!

    Hi bschmidt0726,
    Go to "Setting"; scroll down to the 4th box for "iCloud"; You need to turn on you "Mail" option in the "iCloud" settings.
    Then,
    Go into "Settings", scroll down to "Mail, Contacts, Calendars"; on the left panel, scroll down to the 4th box; there you'll find the "Default Account" settings.

  • How do you create default Read/Write Permissions for more than 1 user?

    My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc.
    However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/folder.
    By default new files and folders grant Read/Write to the creator of the new file/folder, and read-only to the Group "Staff" in our own accounts or "Wheel" in the /Users/Public/ folder, and read-only to Everyone.
    We are both administrators on the machine, and I know we can manually override the settings for a particular file/folder by changing the permissions, but I would like to set things up so that the Read/Write persmissions are assigned for both of us in the folder for that holds our business files.
    It is only the 2 of us on the machine, we trust each other and need to have complete access to these many files that we share. I have archiveing programs running so I can get back old versions if we need that, so I'm not worried about us overwriting the file with bad info. I'm more concerned with us having duplicates that are not up to date in our respective user accounts.
    Here is what I have tried so far:
    1. I tried to just set the persmissions of the containing folder with us both having read/write persmissions, and applied that to all containing elements.
    RESULT -> This did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
    2. I tried using Sandbox ( http://www.mikey-san.net/sandbox/ ) to set the inheritance of the folder using the methods laid out at http://forums.macosxhints.com/showthread.php?t=93742
    RESULT -> Still this did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
    3. I have set the umask to 002 ( http://support.apple.com/kb/HT2202 ) so that new files and folders have a default permission that gives the default group Read/Write permissions. This unfortunately changes the default for the entire computer, not just a give folder.
    I then had to add wife's user account to the "Staff" group because for some reason her account was not included in that. I think this is due to the fact that her account was ported into the computer when we upgraded, where as mine was created new. I read something about that somewhere, but don't recall where now. I discovered what groups we were each in by using the Terminal and typing in "groups username" where username was the user I was checking on.
    I added my wife to the "Staff" group, and both of us to the "Wheel" group using the procedures I found at
    http://discussions.apple.com/thread.jspa?messageID=8765421&#8765421
    RESULT -> I could create a new file using TextEdit and save it anywhere in my account and it would have the permissions: My Username - Read/Write, "Staff" or "Wheel" (depending on where I saved it) - Read/Write, Everyone - Read Only, as expected from the default umask.
    I could then switch over to my wife's account, open the file, edited it, and save it, but then the permissions changed to: Her Username - Read/Write, (unknown) - Read/Write, Everyone - Read Only.
    And when I switch back to my account, now I can open the file, but I can't save it with my edits.
    I'm at my wits end with this, and I can believe it is impossible to create a common folder that we can both put files in to have Read/Write permissions on like a True Shared Folder. Anyone who has used windows knows what you can do with the Shared folder in that operating system, ie. Anyone with access can do anything with those files.
    So if anyone can provide me some insight on how to accomplish what I really want to do here and help me get my system back to remove the things it seems like I have screwed up, I greatly appreciate it.
    I tried to give as detailed a description of the problem and what I have done as possible, without being to long winded, but if you need to know anything else to help me, please ask, I certainly won't be offended!
    Thanks In Advance!
    Steve

    Thanks again, V.K., for your assistance and especially for the very prompt responses.
    I was unaware that I could create a volume on the HD non-destructively using disk utility. This may then turn out to be the better solution after all, but I will have to free up space on this HD and try that.
    Also, I was obviously unaware of the special treatment of file creation by TextEdit. I have been using this to test my various settings, and so the inheritance of ACLs has probably been working properly, I just have been testing it incorrectly. URGH!
    I created a file from Word in my wife's account, and it properly inherited the permissions of the company folder: barara - Custom, steve - Custom, barara - Read/Write, admin - Read Only, Everyone - Read Only
    I tried doing the chmod commands on $TMPDIR for both of us from each of our accounts, but I still have the same behavior for TextEdit files though.
    I changed the group on your shared folder to admin from wheel as you instructed with chgrp. I had already changed the umask to 002, and I just changed it back to 022 because it didn't seem to help. But now I know my testing was faulty. I will leave it this way though because I don't think it will be necessary to have it set to 002.
    I do apparently still have a problem though, probably as a result of all the things I have tried to get this work while I was testing incorrectly with TextEdit.
    I have just discovered that the "unknown user" only appears when I create the a file from my wife's account. It happens with any file or folder I create in her account, and it exists for very old files and folders that were migrated from the old computer. i.e. new and old files and foders have permissions: barara - Read/Write, unknown user - Read Only, Everyone - Read Only
    Apparently the unknown user gets the default permissions of a group, as the umask is currently set to 022 and unknown user now gets Read Only permissions on new items, but when I had umask set to 002, the unknown user got Read/Write permissions on new items.
    I realize this is now taking this thread in a different direction, but perhaps you know what might be the cause of this and how to correct or at least know where to point me to get the answer.
    Also, do you happen to know how to remove users from groups? I added myself and my wife to the Wheel group because that kept showing up as the default group for folders in /Users/Shared
    Thanks for your help on this, I just don't know how else one can learn these little "gotchas" without assistance from people like you!
    Steve

Maybe you are looking for