16:9 footage is being exported out as 4:3

I have some DV footage that I shot in 16:9. In FC everything appears to be 16:9, (in the canvas, the file and seq is checked anamorphic), and when I go to the original DV clip ingested with imovie 08, quicktime plays the clip in 16:9. The problem is: when I export my movie out of FC using export quicktime movie and choose curret setting, I get a quicktime movie that shows in 4:3. No piller box, just a narrower (squished) view of my video. I've tried exporting out as DV NTSC anamorphic with same results. My sequence is DV-NTSC anamorphic. Any advise? It seems like most topics on this issue are complaining about the opposite, 4:3 being stretched to 16:9. I'm confused.

Have a look at this Joe - it might help:
http://discussions.apple.com/message.jspa?messageID=10138379

Similar Messages

Question on exporting out to DV/DVCPRO - NTSC

I am trying to conform footage to my Easy Setup in Final Cut Pro and for some reason, it won't. My Easy Setup is based on the DV/DVCPRO - NTSC setup with the aspect ratio being 720x480. When I export the footage out, it gives me 720x480 (640x480). That's fine.
So I switch it to NTSC 720x480 4:3 and it still exports out as 640x480.
I try the custom option and type in 720x480 and it still exports out as 720x480.
What am I doing wrong? Is it trying to conform the aspect ratio to what the original video size is? Thanks.

What am I doing wrong? Is it trying to conform the aspect ratio to what the original video size is?
You are confusing the rectangular pixel encoding matrix (720x480) with the square pixel display dimensions (640x480). You must remember that DV was historically developed as a broadcast compression format to more closely reflect the rectangular pixel presentation of older CRT televisions having 720x480 rectangular pixels to display the equivalent of a 640x480 square pixel image.
So I switch it to NTSC 720x480 4:3 and it still exports out as 640x480.
I'm not quite sure what you saying you want to do here. If you were to display 720x480 rectangular pixels on a square pixel device (e.g., a computer monitor, HDTV, etc.), then at 720x480 square pixels the image would look somewhat squat with people and objects looking shorter and fatter than they should be because you have changed the aspect ratio from 4:3 (640x480) to 720x480 which would then have an actual square pixel aspect ratio of 1.5:1 (or 3:2) rather than 4:3.
As an aside, a 16:9 anamorphic DV file would also encode to the same 720x480 data matrix but (as long as the flag is not lost) actually play back at either 640x360 or approximately 853.3x480 depending on the application in use and you would see an entry of 720x480 (853x480) or 720x480 (640x360) on the player Inspector or Info window.
So, unless you are saying that your file has lost its anamorphic value (which can happen in some workflows), it sounds as if everything is working correctly.

None of the cross tabs are being exported to Excel

Hi All,
I am experiencing a strange problem of export failing when any of the cross tab is exported. It comes out with a message,
"An error occurred while trying to export the Worksheet.
(Export failed.) "
This is occuring in Plus and Viewer.
But All the tables are being exported without any problem.
Any Idea ???
Thanks

Only iTunes purchases may copy over via File > Transfer Purchases - otherwise syncing is one way, from the computer to the device. To get the rest of your music/films etc onto the new computer you can copy the backup from your old computer onto the new one and then load them into iTunes

What does adobe export do with images in the PDF file being exported?

What does Adobe export do with images within the PDF being exported?

Hi sonotim,
I'm not sure what you mean by your question. There's a couple of different ways of thinking about this. Could you be more specific about what you're trying to find out?
-David

My old Apple Id can no longer be accessed due to my original e-mail being locked out. How can I switch Apple ID's without access to the one my phone continues to use?

My old hotmail account which has my old Apple ID (which is still connected to my phone) has been locked out. I have forgot the password to my original Apple ID and a recovery cannot be sent to my old account due to me not being locked out (believe someone has hacked it). I have set up a new Apple ID with a seperate e mail adress, however I cannot use the App Store because of my phone only recognizing the original e-mail I can no longer acess. Please help.

Contact the Apple account security team for your country and ask for assistance resetting the password: Apple ID: Contacting Apple for help with Apple ID account security.

Dialog programming, data being washed out in TAB Control

Hi,
     i am working on dialog programming , in which i am using Table Control for user input (data is not coming from database table) . everything is going well till assignment of data to internal table but when
control goes to PBO by any means like pressing ENTER etc. then data being washed out.
PROCESS BEFORE OUTPUT.
MODULE TC_CONTROL.
LOOP AT it_data
         INTO wa_data
         WITH CONTROL tc_control
         CURSOR tc_control-current_line.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT IT_DATA.
    CHAIN.
      FIELD WA_DATA-FREPS_N.
      FIELD wa_data-TOEPS_N.
      FIELD wa_data-PRCH_A.
      FIELD wa_data-SRVC_AMT .
      FIELD wa_data-ACCNT_C.
      FIELD wa_data-AMT_D.
      FIELD wa_data-NARR_X.
      FIELD wa_data-CRPRD_N.
      MODULE tc_control_modify ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
*Abap program
MODULE TC_CONTROL OUTPUT.
DESCRIBE TABLE it_data LINES tc_control-lines.
ENDMODULE.                 " TC_CONTROL OUTPUT
CONTROLS: TC_CONTROL TYPE TABLEVIEW USING SCREEN 1000,
          TC_CONTROL1 TYPE TABLEVIEW USING SCREEN 1000.
DATA:     G_TC_CONTROLS_LINES LIKE SY-LOOPC,
          G_TC_CONTROLS_LINES1 LIKE SY-LOOPC.
*&      Module tc_control_get_lines OUTPUT
      text
MODULE tc_control_get_lines OUTPUT.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to wa_data.
ENDMODULE.                 " tc_control_get_lines OUTPUT
MODULE tc_control_modify INPUT.
move-corresponding wa_data to it_data.
MODIFY it_data
    FROM wa_data
    INDEX tc_control-current_line.
append it_data.
clear it_data.
ENDMODULE.                 " tc_control_modify INPUT
Please suggest me any clue.
Thanks in advance
vijay dwivedi

Hi ,
I have understood the problem.
In your ABAP code replace all the occurrrences of wa_data with the structurename.
Use the TABLES keyword to declare the structure .That structure will be same as
reference table of the table control .
Here the structure is SPFLI.
Check the bellow code , it will resolve the issue.
ABAP code - -
program zsdn.
tables spfli. " Declare the structure
data : it_data like table of spfli with header line,
*wa_data TYPE spfli, " commented
w_i type i.
*CONTROLS TC_CONTROL TYPE TABLEVIEW USING SCREEN 100.
controls: tc_control type tableview using screen 1000,
tc_control1 type tableview using screen 1000.
data: g_tc_controls_lines like sy-loopc,
g_tc_controls_lines1 like sy-loopc.
module tc_control output.
describe table it_data lines tc_control-lines.
endmodule. " TC_CONTROL OUTPUT
module tc_control_get_lines output.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to spfli.
endmodule. " tc_control_get_lines OUTPUT
module tc_control_modify input.
move-corresponding spfli to it_data.
modify it_data
from spfli
index tc_control-current_line.
append it_data.
clear it_data.
endmodule. " tc_control_modify INPUT
module status_0100 output.
set pf-status 'STAT'.
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0100 OUTPUT
module user_command_0100 input.
case sy-ucomm.
    when 'BACK' or 'EXIT' or 'CANCEL'.
      leave to screen 0.
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
*&      Module POPLATE_TABLE OUTPUT
*       text
module poplate_table output.
if it_data is initial.
    select * from spfli into table it_data.
endif.
endmodule.                 " POPLATE_TABLE OUTPUT
Screen code (Scr no 1000) - -
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE poplate_table.
MODULE tc_control.
LOOP AT it_data WITH CONTROL tc_control CURSOR w_i.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0100.
LOOP AT it_data.
    MODULE tc_control_modify ON CHAIN-REQUEST.
*    ENDCHAIN.
ENDLOOP.
Regards
Pinaki

ProRes 422 (HQ) QT Export out of FCP getting error on re-import

The quicktime exports I'm producing out of my FCP system need renders when I drag them back into the project, into a seq. with the same exact settings they had on export. Even if I drag my export into the same sequence it was exported from!
I'm trying to export a self-contained QT with current settings from a Pro Res 422 (HQ) 1920 x 1080 50i Sequence .
On creating a new sequence, I select the sequence preset Apple Pro Res 422 HQ 1920x1080 50i, then cut in the media-- the media is a 90 min Pro Res 422 HQ quicktime from an online house, also 108050i.
Predictably, no render required. The frame rate, frame size, pixel shape, field, codec match between the media and the sequence.
However, if I export out of that sequence (using File – Export Quicktime; Self-Contained, Current Settings), then re-import the Quicktime and put it back in that same sequence or another new sequence with the same preset settings, it needs picture render. This is only if my export selection from the sequence is at least a few minutes long. If I set an in and an out for a :30 sec selection and export that quicktime, I can play that back in the sequence with no render.
The fact that there's some difference between a 90 minute export from my computer and a 30 second export from my computer could be a clue.
Additional info-- I have tried creating a new sequence with the wrong settings preset to get the FCP prompt "would you like to conform the sequence settings to match the file?" Then I click yes to conform settings and my quicktime export goes into the sequence-- with a red render bar. But if I then cut in the Pro Res HQ QT from the post house it will not need a render. These two QTs appear identical when I compare their item properties in FCP. On playback, in the viewer window, my export will appear a little stuttery.
Can anyone tell me what this means and if I can export a quicktime that does not need to be rendered to be played back in FCP?
Many many thanks!
I'm running FCP 6.0.5 on a 2 x 2 GHz Quad Core with 11 GB Ram. Mac OS 10.5.6. I have media running off of 2 external drives, connected via eSATA. Drive Speed on the externals-- need to double check.

The Error I referred to in the title -- I am getting the message "clip settings do not match any sequence presets" when I try to cut my export into a sequence. Seems bizarre because it just came out of a sequence preset, not a custom sequence, using "current settings."

How do I know if my contract is being bought out?

There are some people in my area who have been receiving mail stating their contract is being bought out by AT&T. I have not received any correspondence regarding this. However, when I am on the Verizon wireless website it directs my to a page stating the area I am in is transitioning to AT&T. How do I know if I am affected by this. I am considering upgrading my phone, but don't want to if I am going to be bought out. Any help would be great.

Most of those people should have been/will be transitioned. It is dependent on your billing address and/or phone number. Where are you located at?
Only certain areas of Nebraska, Michigan, and Minnesota had Verizon customer accounts and towers sold to AT & T as part of the requirements of the FCC approval for the Alltel/Verizon merger.
http://www.cellularmaps.com/alltel_divest.shtml

OMF won't export out of final cut pro.

Exporting a 93min 1920x1080 HD timeline to OMF
5 second handles tried 2 second handles as well.
OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
Final cut 6.0.6
Have deadline. Didn't see it on any forum. Help!! Thanks!!

Seems like a weird thing to not be able to do since it's called final cut PRO...
Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
Shane

How to export out the date into the csv file?

Hi, I had been trying to export out the value of the date to csv file.
This is the script:
$strADPath = 'LDAP://dc=test,dc=com'
function ConvertLargeIntegerToDate([object]$LargeInteger){
try
$int64 = ConvertLargeIntegerToInt64 ($LargeInteger)
if ($int64 -gt 0)
$retDate = [datetime]::fromfiletime($int64)
else
$retDate = $null
return $retDate
catch
return $null
$objSearch = New-Object DirectoryServices.DirectorySearcher
$objSearch.Filter = '(&(objectClass=user)(samaccountname=user1))'
$objSearch.SearchRoot = $strADPath
$objSearch.PageSize = 1000
$objSearch.SearchScope = "subtree"
$objResults = $objSearch.Findall()
$dateAccountExpires = ConvertLargeIntegerToDate $objUser.accountexpires[0]
Write-Host "date Account expires: " $dateAccountexpires
$objResults| ForEach-Object{
$_.GetDirectoryEntry()
} |
Select-Object -Property @{Name="sAMaccountName";Expression={$_.sAMAccountName}},
@{Name="cn";Expression={$_.cn}},
@{Name="name";Expression={$_.name}},
@{Name="manager";Expression={$_.manager}},
@{Name="givenName";Expression={$_.givenName}},
@{Name="accountExpires";Expression={$_.dateAccountExpires}},
@{Name="department";Expression={$_.department}} |
Export-Csv -Path 'D:\test44.csv'
This is what I get in PowerShell ISE:
This is what I had get for the csv file for the expire date:

hi FWN,
the code had giving me error saying that it could not call method on a null-value expression.
$temp = $_.Properties
the code had gave error saying that it could not call method on a null-value expression.
$properties | %{ $res.$_ = $temp.Item($_) }
the code had gave error saying that it could not call method on a null-value expression.
with lot of thanks
noobcy

BPM Message being sent out

My Scenario 3files to BPM-XI- r3(one file)
when i run my scenarion I have a clock symbol saying " Message being sen6t out" and it does not change even aftre some time. and i also dont see a message sent out from BPM to r3

There will be something called "PE" next to the symbol. Click on that. It w2ill take you to the BPM monitoring. then click on the symbol which looks like a table on the screen. This will show you where exactly your message is stuck. Then check the errror, fix it and your scenario should work fine.

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.
Can you help?

Hi Marv13, disregard my last post. The 6520 does have eFax capabilities and the support document I provided a link to needs updating. If you contact HP Cloud Services phone support they will be able to resolve this issue for you. The number and available times are posted below:
HP Cloud Services
1-855-785-2777
Hours of Operation
Monday-Friday 8am-11pm ET
Saturday 10am-6:30pm ET
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How can I change the settings for being timed out (I don't want to be timed out ever)

How can I change the settings for being timed out (I don't want to be timed out ever)?

I am sorry but this isn't something that you can set. The system has timeouts built into the code.
Andrew

Export out of DRM/Import into PeopleSoft

Hello,
Do any of you have experience creating an export out of DRM to go into the PeopleSoft system to create trees? The PeopleSoft system has a Tree Import; however a file needs to be in a certain format for the Import to work. I wasn't sure if DRM was capable of creating a file in the correct format that PeopleSoft needs or if DRM should just export it's tree data and let the formatting be done by a different tool (ETL, App Designer, etc.). We are on version 11.1.1.2.103.
Below is a high-level example of what the Tree Import file should look like. The 999 lines would be the header lines, and each of the lines underneath the header has a different format (which is fixed-length).
999TREE_VERSION
Tree Version Data
999TREE_STRCT
Tree Structure Data
999TREE_DEFN
Tree Definition Data
999TREE_USERLVL
Tree Level Data 1
Tree Level Data 2
Tree Level Data
999TREE_LEVEL
Tree Level 1
Tree Level 2
Tree Level N
999TREE_USERND
Tree Node Data 1
Tree Node Data 2
Tree Node Data N
999TREE_NODE
Tree Node 1
Tree Node 2
Tree Detail 1
Tree Detail 2
Tree Node 3
Tree Node 4
Tree Node N
Tree Detail 5
Tree Detail N
Thanks in advance for any help you can give me!

how much i understand below are some points:
1- for tree format can be used DRM Export option tabbed output(Export-Style-Tabbed output).
2- For fix length attribute could possible to use Export- Target-Fixed width
you need to do some workaround to generate file as per peoplesoft requirement. Like Different -2 exports as per 999* header lines to meet requirement , hard code header if needed , club all exports in Book to generate one single file.
Please explain more on file format so that can try to help you better.
Thanks!
Sandeep

When exporting out of lightroom the color of my picture channges significantly

I use windows 8 and tried exporting out of lightroom through firefox and this did not help either

Hi Shmuglak. Thank you for the information. I tried those things but did not work.    I just got windows 8 and just downloaded photoshop CC and Lightroom from the cloud.   My settings in Lightroom under preferences are :   Under jpeg preview it is checked on fast load data.   Under external editing the color space is prophoto.   Under additional external editor it is set to preset (Custom). Under Default Develop Settings the only thing checked is apply auto mix when first converting to BW.   Under export module:   Location:   set to same as original folder and no check mark on add to catalog.   Under Post Processing I have tried do nothing and tried firefox.
It is funny that when I export a picture from lightroom using firefox that picture pops for preview and the picture looks fine but then when I go to my email and try to email that same picture and use send with a file attachment the picture looks aweful on my desktop but when looking at it on the ipad or iphone the picture looks fine.
Any other suggestions would be great
thank you
Date: Thu, 12 Dec 2013 00:56:36 -0800
From: [email protected]
To: [email protected]
Subject: when exporting out of lightroom the color of my picture channges significantly
    Re: when exporting out of lightroom the color of my picture channges significantly
    created by shmuglak in Photoshop Lightroom - View the full discussion
I don't know if this is your case but I have a similar problem (and has been helped out by some kind soul on this forum). The change of color may happen if you are re-importing the exported pictures into the Lightroom catalog. If this is what you are doing, some import presets may be applied and this may cause the color change. I'm talking about this setting, sheck if it is enabled. If it is, disable it and see if it helps.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5923235#5923235
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5923235#5923235
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5923235#5923235. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

16:9 footage is being exported out as 4:3

Similar Messages

Maybe you are looking for