16:9 HD Slide Show in PSE7?

Can PSE7 export a 16:9 slide show in HD?
How can the "pan and zoom" box be sized to match 16:9?

Thanks. Actually, I tried rebooting and it worked. Now I just double click the slide show image or right click and click Edit and the slide show editor opens.
Marvin Gang

Similar Messages

How do I open a previously created slide show in PSE7?

I created and edited a slide show in PSE7 and closed the slide show editor. I now have an image in the organizer which has a slide show icon in the upper right hand corner. When I click or double click on it, nothing happens and PSE7 stops operating. I must use windows task manager to close PSE7. If I try the create tab with the slide show icon highlighted and then click on slide show editor, PSE7 locks up. How do I open the slide show I created?

Thanks. Actually, I tried rebooting and it worked. Now I just double click the slide show image or right click and click Edit and the slide show editor opens.
Marvin Gang

PSE 8, No audio when creating a slide show

I am unable to create a slide show with audio. All other functions in the slide show function properly but unable to get the audio portion to play. Receive error message "Unable to add audio file, the selected file cannot be played because your system does not have the required compressor/decompressor (CODEC) installed." Checked and all the Vista CODEC's are installed & functioning properly. Checked and downloaded the latest CODEC from Realtek for the audio board. No audio recognized within Organizer or from file folders. Went to Adobe Tech. and got brushed off. Any thoughts or ideas would be greatly appreciated.

1. I have Windows Media Player 11. It plays my music files which are mostly .MP3 I am unable to locate the Adobe music files using Windows Explorer. May be an indication that they didn't load when the program was installed. I have uninstalled and re-installed PSE 8. from my disc's.
2. I Tunes is my primary player.
3. OS is Vista Home premium
After running around in circles for several days I have tried the following:
1. I opened PRE8 and created a slide show and imported audio file from my music folder. Played OK. Slide show performed OK. I did not locate the included music folder with program.
<edited>
3. In PSE8 I searched with Windows Explorer and could not locate any audio music files. The error message I receive is:
"Unable to add the audio file (C:\Program Data\Adobe\Photoshop Elements\6.0\usic\A_Taste_Of_Sicily.mp3) The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed."
Note that it is searching in PSE6 for the file. I missed that before. I long ago uninstalled PSE6 and PSE 7 was installed in its place and since PSE8.
Now I am suspicious that the music files never loaded with the install of PSE8 and it is searching for music files that no longer exist. Not sure what is corrupted and not sure what else to try. I think I will reload PSE7 and see if I can locate the included audio files and attempt to load a slide show with PSE7.

Can't view a slide show made is PSE7 in PSE8 - Please help.

I made a slide show in PSE 7 with music etc. Then I bought PSE 8 and installed it - deleted PSE 7. I can no longer view the slide show in PSE8. I have the time line with the pictures and the music is playing - unfortunately the screen is black. It is interesting because the timeline moves from slide to slide with the music but the screen is black. Please help...

Run your Organizer by selecting "Run as Administrators" option on right click

Leveling Music Volume in a Slide Show

I have created a wmv file of a slide show to play using Windows Media Player. The music for the show consists of several songs. They have noticeably different volume levels. Is there a way, in PSE7, to level the volume among the songs?

You would need to do this in an audio program before bringing it into PSE.

Best way to create slide shows in PE4 and PSE 6

What's the best way to create a fancy slide show in PE 4 and PSE 6? I need to create a slide show of about 600 pictures. I'm on Windows XP with 3gb RAM. I've done this a few years ago in earlier versions of PE and PSE. Before i plunge into this again i wanted to get some overall guidance for what to do or not do.
My ultimate goal is to create a slide show that:
1. uses pan and zoom on every photo
2. transitions between every photo
3. has an audio track
4. has some nice special effects -- words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out.
My view is that it's easy to accomplish #1-3 in PSE 6; it's quite simple to create a slide show, add pan and zoom, and transitions. However, #4 is not doable because adding text and graphics can only be done on a slide at a time and only when the slide start/stops (i.e., you can't have text appear 2 secs after the slide has started displaying and stay on screen while the next slide appears). Need PE 4 to do that.
What i'm wondering is:
-- is it best to create the basic slide show in PSE6 and then export to PE 4 to do the final fancy stuff, or is it best to just create the show in PE4? Seems that doing the pans, zooms, and transitions are easiest in PSE 6.

eric,
I am going to offer some reasons NOT to start this slide show in Photoshop Elements. This is despite the fact that I have used the workflow of starting in Photoshop Elements and used the Send Slideshow to Premiere Elements in PSE5 - PE 3 and PSE7 - PE7.
1- Timing differences between the PSE and PE slide show construction and processing
There are many differences in timing between the two products. Transitions can start/end slightly offset from their timing in PSE once they arrive and are processed in PE. Same for pan and zoom. Does this matter? Well the more precise your timing, the more potential for a show stopper.
Example: one person who wanted continual motion using pan and zoom needed to go modify the transition positioning and the keyframing of the pan/zooms on every single slide after sending a slideshow from PSE to PRE.
2- your requirement to
"words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out."
You can't really sync the audio to a slide in PSE. The text can't move or fade in/out. I think that it will be more grief to retrofit these functions to a slide show that was created in PSE than it will be to do the all the work in Premiere Elements.
3- "Add the sound track for the ENTIRE slide show (this will be longer than i currently have slides for because i don't have all the photos"
I am suspicious that adding the ENTIRE sound track in one PSE slide show will not work.
I have done multiple sends from PSE slide show editor to Premiere Elements. However, I decided on the approach of using no audio in the PSE slideshow editor and adding Audio in Premiere Elements AFTER sending all the slide shows.
Again, your objective of syncing specific photos to music points is good artistically - but I am concerned that it will make your PSE to PRE workflow problematic.
4- "as new photos arrive, do the arrangement/pans/zooms in PSE and move them to PE"
As Steve mentioned when you do subsequent sends of the slideshow, it appends to the end - does not seem to fit your objective of replacing part of the middle.
Also if you get new photos in for the second section of the slideshow - but over in Premiere Elements you had already made other changes in the second section. There is no function to combine new changes doen in PSE and changes done in PE for that same "section" of the slideshow.
5- you did not say whether you will be outputting this slide show in Full Screen or Widescreen format. Will you be burning a DVD? If you will be doing widescreen output, additional problems with specifying pan/zoom in PSE have been identified on various forums because the PSE pan/zoom boxes are not widescreen aspect ratio.
Conclusion:
Some of my comments here are definitely subjective - however, it is my overall conclusion that your objectives and work plan are not a good fit for the Photoshop Elements slide show editor to Premiere Elements workflow.
My perspective on the Photoshop Elements slide show editor is that it is designed to simple, quick and easy. Therefore it has limitations.

Missing slide show photos

I just upgraded to PSE7 from PSE5 and converted the catolog ok. A slide show I had just made in 5 has the index photo in the catolog, but comes up with empty photos. The blank frames are there with the time for the slide and the total running time for the show. What happened to the photos?

> Downloaded psedbtool. It works but I can't get the output.log It runs its diagnostic then disappears.
You need to start a command prompt and then type the command in, as described in steps 2-4 of the download instructions linked above . If you simply double-click psedbtool.exe, its window will close immediately after running.
>All the pictures seem to be in the organizer. They just don't come up for the old slide show I did.
What about my question 2 from the previous post? This will indicate whether the problem is just with the slide show itself or with the photos that are included in the slide show.
> I just wonder if it would be easier just to redo the show.
If you catalog has otherwise converted fine, then it may be easiest to redo the show. But the problems with this slide show may indicate other catalog problems with the conversion that could be still lurking.
> I have the one from Ver 5 on CD. Could I copy it back into Ver 7?
No, that wont work. The only way to get a PSE 5 slide show into PSE 7 is to convert the catalog containing the slide show.

Trouble with making slide show VCD or copying photos to CD

I have saved approximately 200 photos and made a copy of the photos on a cd. The problem is that some of the photos copied horizontally instead of in vertical format.....the photos where all properly showing on the PSE7 organizer...but about 13 copied in the wrong format??? Then I tried making a slide show with music....works fine in the PSE7 program, but when I went to output to VCD, nothing copied....except some files that don't contain the photos?
Russ

1. Reduce the image size 1000 x 750 if you are using high resolution images.
2. Use windows supported codec background music for slide show.
3. Update the latest audio/video drivers.

Problem with adding music to a slide show

I am trying to add add'l music to a slide show in Elements 9. The first songs added easily. I am now getting a message that the "codec" is insufficient. There does not seem to be any difference in the properties of the songs that are being rejected and the songs that loaded. How do I correct this to add the MP3 songs?

Thanks for your response. In answer to your questions:
1. What is PRE?
2. mpeg is not a choice on my version of pse7. Only mp3, wav, wma and ac3.

How can I control the music that plays during Apple TV photo slide shows?

I don't want to make my parents listen to Breaking Benjamin music as they watch my photo slide shows on Apple TV. Need something more sedate. But if a B.B. song is in my iTunes music library, it is a candidate for random selection as background music for my slide shows. How do I control what music plays during Apple TV photo slide shows?

What I find is really silly, is the fact the music video's are listed under that artists albums in the Music menu. And when you go into the video 'album' (called 'Unknown' unless you change it) there is an option to shuffle the tracks. Clicking this just results in an error message. So, they should either remove that option if it is a video album, or, better yet, GET IT TO WORK. So silly of them to omit this.
I have submitted feedback.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

A How To: Create a Widescreen High Definition Slide Show from the Organizer

[EDIT] I just tried another one and, weirdly, that produced an output with black bars around all four sides! So maybe this 'how to' is not 100%. I have considered deleting the post altogether but, as it does still produce a superior slideshow quality file than the standard ones provided with Elements, I've decided to leave it with this edit added at the top for additional info.[END_EDIT]
In answering a question in another forum I found a nice quick way to create proper widescreen high definition slide shows from just the Elements Organizer. Apologies if this is 'old news' to readers, but I've not seen this described elsewhere so I thought I'd share it.
The Organizer Slide Show creator, if not wanting to edit in PRE, provides a small set of Windows Media Player profiles to create .wmv files. But the best of these goes only to 1024x768 (a 4:3 monitor resolution setting). I've noticed, but never paid much attention to, that at the bottom of the Slide Size box there is a 'Browse for more' option that lets you search for additional Windows Media Encoder profiles. Investigation showed me that I can download the Windows Media Encoder software from Microsoft and create my own profiles. But even further investigation showed me that someone had already done this! I've tested their full HD profile and it works just fine (1920x1080).
So if you are just after a straightforward slide show (i.e. not needing PRE features) but want it displayed on your Full HD TV set here is what you do:
Download the HD Profiles from http://forums.nexusmods.com/index.php?/topic/236895-hd-profiles-for-windows-movie-maker/. There's also a couple of useful SD sizes there as well. Save them somewhere you can easily find them.
Create your slide show in the Organizer. Obviously use appropriately sized images for HD. There's little point outputting an HD wmv file using low resolution and/or 4:3 aspect ratio images.
Save and Output your slide show.
In the output dialog ('Save As a File') scroll down to the bottom of Slide Size and select 'Browse for more ...'.
Browse to the file you downloaded in step 1 and click Open.
Click OK and your Widescreen HD .wmv file is prepared.
Here's a Gspot analysis of my test output file. As you can see it is an HD file with a 16:9, square pixel, aspect ratio.
Ta Da!
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

nealeh
You did not mention a specific Premiere Elements Elements Organizer combo for this, so for now I will address this from the version 11, not Windows Movie Maker, perspective if I need to get version specific.
.prx
The Browse for More is a well known route and does offer at least one Adobe profile for 1280 x 720 16:9. I am not sure where you came up with the lesser resolution,1024 x 768 that you mentioned. The Windows Media profiles have existed for several versions of Elements Organizer. Those Adobe ones that you do not see under Output Save As A File Movie (.wmv), can be found in the Windows 7 or 8 64 bit path
Local Disc C
Profile Files (x86)
Adobe
Elements 11 Organizer
Assets
Locale
en_US
tv_profiles
in the tv_profiles Folder are included the .prx files
.....10. 640 x 480 Enhanced Definitions
.....12. 852 x 480 Widescreen Enhanced Definition
.....14 1280 x 720 Widescreen High Definition
A homemade 1920 x 1080 16:9 30 frames per second .prx has long been sought but not that easily produced by many using with the Windows Media Encoder Editor. Apparently you have found one online, and it does get accepted into the Premiere Elements 11 Browse for More choices. And, if you do a gspot readout for the wmv output from Elements Organizer 11, it will display all the "right" properties that you hoped for and that are shown in your screenshot.
The bottom line, why bother with the wmv slideshow? If you take your original photos and size them for 1920 x 1080 16:9, use them in the Elements Organizer 11 Slideshow Editor (Crops used in preferences), use the Edit with Premiere Elements Editor command, what you get in Premiere Elements 11 is full and good in all regard. Have you tried it?
I can see your interest if this is HD going to HD (AVCHD on DVD or Blu-ray disc format on Blu-ray disc, but I do not see this for an Elements Organizer Slideshow that is going to DVD-VIDEO widescreen.
More later.
ATR

Final cut pro crashing with slide show photos

I am working with a large slide show - a few movie clips, but mostly still images from Aperture. The photos were shot wtih a Nikon D300 in Raw, not that I think that matters much at all.
Becasue this is a slide show I am working wth short durations for the images - usually 3:14. Most of the transitions are simply cross dissolve, but some are more complex.
I am getting again and again crashes - or the spinning color circle going to oblivion and requiring a Force Quit.
Either can happen when adding new material, moving arround existing material, or trying to reset durations, add text, different transitions, or working wth the Ken Burns options. Sometimes it also happens when resizing the time line zoom level.   This marvelous feature seems the most consistent way of trashing the application so I tend to leave it alone.
I may be able to work for an hour or only a few minutes. Sometimes deleting and re-adding an image seems to help, but that may not be true - most of the time it's just simply random.   The system has 14 Gig Ram and I am using iCleanMemory now to see how much is in play. A crash / freeze may occur with a lot or a little - usually looks like I have about 8.9 Gig in play for normal use of Final Cut and no clear change when it crashes / freezes.
Clearly the images are compatible - they are from Aperture and there is no consistency in always the same image being the issue.
Below is the first part of the error report dump.
Hoping someone has an idea for how to overcome this.
Appreciate the thoughts.
Cheers -
Dan
Process:         Final Cut Pro [1012]
Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCut
Version:         10.0 (179114)
Build Info:      ProEditor-179110400~1
App Item ID:     424389933
App External ID: 3491984
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Date/Time:       2011-08-17 17:57:45.775 -0600
OS Version:      Mac OS X 10.7.1 (11B26)
Report Version: 9
Interval Since Last Report:          50891 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 2401 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      D1C2721F-974C-4845-BFD9-2EA572309772
Crashed Thread: 17 CVDisplayLink
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000010371ed40
VM Regions Near 0x10371ed40:
    IOKit                  00000001036ff000-0000000103700000 [    4K] rw-/rw- SM=ALI
--> MALLOC_TINY            0000000103700000-0000000103800000 [ 1024K] rw-/rwx SM=COW
    MALLOC_SMALL           0000000103800000-0000000103885000 [ 532K] rw-/rwx SM=ZER
Application Specific Information:
objc[1012]: garbage collection is OFF

Well, I filmed many of those videos in HDV (the 2x2 wall, the 5x5 wall and some of the 10x10 wall). Plus I converted the whole project to HDV because it is the way I displayed it (thru camera to Plasma TV's) and I wanted the HD space to work with and since part of my videos were HDV I figured that would be best.
Of course the DV footage is not so good quality, but when made very small for that big screen it looks fine I think. Yeah the AIC codec is great but it takes 4 times as much room, but you think that would work better hey?
I just don't want Final Cut crashing like that. I don't care if it can't play it back in real time or it takes 10 seconds to display 1 frame.
I have not used motion....would it work for what I did. Remember I used over 100 discreet video streams I had. I don't want to replicate the same layer...you get the drift.
Did you see it in youtubes HD? What did you think of the quality?

Slide Show Problems--Please help

In Go Live CS 7.0.2, why does my slide show preview fine, but when I upload it to the internet it doesn't work? Please Help!
Trouble page...
http://www.ifsoinklined.com/Pages/traditional.html
Thanks!

In article <[email protected]>,
[email protected] wrote:
> THANK YOU A MILLION TIMES! What is wrong with me?
I'm sure there's nothing wrong with you. Just make sure your GL is set
to automatically a) flattend the Script Library and b) to upload *all*
modified items. From that point on it should be all smooth sailing :-)
Cheers Martin

ANNC: Slide Show Magic

http://www.projectseven.com/products/galleries/ssm/
Leaps beyond the ordinary...
Efficient code and buttery smooth animations make for a truly
engaging
user experience. Slide Shows and individual images can be
bookmarked and
all images can be viewed - even if JavaScript is disabled.
Search Engine Friendly
Unlike many of today's Flash and AJAX applications, Slide
Show Magic
markup is always fully visible and indexable by leading
search engines.
Auto-Choreographed Animation
Slide Show Magic detects the size of each incoming full-size
image. If
it's the same size as the current image, the system will
employ a smooth
cross-fader - simultaneously fading out the current image as
the new one
fades in. If the incoming image is a different size than the
current
one, the system will fade out the current image, glide the
image
container to the size of the incoming image, then fade the
new image in.
It's all automatic.
Staged preloader
When the slide show is running in automatic mode, the system
will
preload the next image as the current one is being shown,
providing a
seamless experience in most cases.
Intuitive toolbar controls
The on-page toolbar contains conventional media controls:
First,
Previous, Play, Pause, Next, and Last buttons. It also
contains a slider
bar that allows users to adjust the slide show timing, plus
buttons to
toggle visibility of the thumbnail display and navigation
menu, and an
image counter.
Drag-enabled thumbnail panel
The Thumbnail panel can be dragged about the screen, enabling
users to
fine-tune the interface for best viewing of the show.
Full-Size images can be hyperlinks
Each full-size image can optionally be set as a hyperlink to
another
page, programmed to open in a new window or tab.
Image descriptions
Each full-size image can display an optional description,
which can
contain any type of valid markup (paragraphs, tables, DIVs,
lists,
links, or images).
Automated image processing with Fireworks...
Web-ready images are automatically produced from your
original images,
which can be located on any drive connected to your computer
- including
drives mounted by your digital camera. Slide Show Magic
handles all
image processing automatically - preserving your original
files in their
original locations in their original and unaltered states.
Your images
are scaled, optimized, and neatly organized into folders
within your
defined site.
Import your existing images...
Point to a folder (or folders) that contain your existing
full-size and
thumbnail image and Slide Show Magic will match them up and
add them to
your slide show - unaltered and ready to view.
Organize Images into sets
Slide Show Magic enables you to define logical image sets and
organizes
the thumbnail panel into navigable sets.
Mix landscape and portrait orientations
Your images are never distorted in any way. Original aspect
ratios are
always preserved. Use both landscape and portrait images in
the same
slide show.
Deploy alone or inside existing layouts
Slide Show Magic can be inserted on a page by itself or
inside an
existing page.
Select from 6 Themes
Select a dark toolbar, a light toolbar, shadow boxes (in 3
sizes), or an
image rotator interface. Style themes can even be switched
for existing
slide shows.
Manage it all inside a dedicated Dreamweaver Interface
Add (append) new images
Delete images or re-order them
Manage Descriptions, links, and ALT text
Edit existing full-size or Thumbnail images
Reprocess all of your slide show's images
And lots more, including a comprehensive manual and free tech
support.
$95
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"

Al,
Wow. That's extremely cool. I currently don't have a need for
a slideshow,
but in the future if I do, you know where I'm heading to.
Nice product!
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Back for 2007, close-up magic:
http://deceptivemagic.com
Web dev articles, photography, and more:
http://sourtea.com
=============================================
Proud GAWDS member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Al Sparber- PVII" <[email protected]> wrote in
message
news:[email protected]...
>
http://www.projectseven.com/products/galleries/ssm/
>
>
> Leaps beyond the ordinary...
>
> Efficient code and buttery smooth animations make for a
truly engaging
> user experience. Slide Shows and individual images can
be bookmarked and
> all images can be viewed - even if JavaScript is
disabled.
>
>
> Search Engine Friendly
>
> Unlike many of today's Flash and AJAX applications,
Slide Show Magic
> markup is always fully visible and indexable by leading
search engines.
>
>
> Auto-Choreographed Animation
>
> Slide Show Magic detects the size of each incoming
full-size image. If
> it's the same size as the current image, the system will
employ a smooth
> cross-fader - simultaneously fading out the current
image as the new one
> fades in. If the incoming image is a different size than
the current one,
> the system will fade out the current image, glide the
image container to
> the size of the incoming image, then fade the new image
in. It's all
> automatic.
>
>
> Staged preloader
>
> When the slide show is running in automatic mode, the
system will preload
> the next image as the current one is being shown,
providing a seamless
> experience in most cases.
>
>
> Intuitive toolbar controls
>
> The on-page toolbar contains conventional media
controls: First, Previous,
> Play, Pause, Next, and Last buttons. It also contains a
slider bar that
> allows users to adjust the slide show timing, plus
buttons to toggle
> visibility of the thumbnail display and navigation menu,
and an image
> counter.
>
>
> Drag-enabled thumbnail panel
>
> The Thumbnail panel can be dragged about the screen,
enabling users to
> fine-tune the interface for best viewing of the show.
>
>
> Full-Size images can be hyperlinks
>
> Each full-size image can optionally be set as a
hyperlink to another page,
> programmed to open in a new window or tab.
>
>
> Image descriptions
>
> Each full-size image can display an optional
description, which can
> contain any type of valid markup (paragraphs, tables,
DIVs, lists, links,
> or images).
>
>
> Automated image processing with Fireworks...
>
> Web-ready images are automatically produced from your
original images,
> which can be located on any drive connected to your
computer - including
> drives mounted by your digital camera. Slide Show Magic
handles all image
> processing automatically - preserving your original
files in their
> original locations in their original and unaltered
states. Your images are
> scaled, optimized, and neatly organized into folders
within your defined
> site.
>
>
> Import your existing images...
>
> Point to a folder (or folders) that contain your
existing full-size and
> thumbnail image and Slide Show Magic will match them up
and add them to
> your slide show - unaltered and ready to view.
>
>
> Organize Images into sets
>
> Slide Show Magic enables you to define logical image
sets and organizes
> the thumbnail panel into navigable sets.
>
>
> Mix landscape and portrait orientations
>
> Your images are never distorted in any way. Original
aspect ratios are
> always preserved. Use both landscape and portrait images
in the same slide
> show.
>
>
> Deploy alone or inside existing layouts
>
> Slide Show Magic can be inserted on a page by itself or
inside an existing
> page.
>
>
> Select from 6 Themes
>
> Select a dark toolbar, a light toolbar, shadow boxes (in
3 sizes), or an
> image rotator interface. Style themes can even be
switched for existing
> slide shows.
>
>
> Manage it all inside a dedicated Dreamweaver Interface
>
> Add (append) new images
> Delete images or re-order them
> Manage Descriptions, links, and ALT text
> Edit existing full-size or Thumbnail images
> Reprocess all of your slide show's images
>
> And lots more, including a comprehensive manual and free
tech support.
> $95
>
> --
> Al Sparber - PVII
>
http://www.projectseven.com
> Extending Dreamweaver - Nav Systems | Galleries |
Widgets
> Authors: "42nd Street: Mastering the Art of CSS Design"
>
>
>
>

16:9 HD Slide Show in PSE7?

Similar Messages

Maybe you are looking for