16:9 in Premiere???

Hallo,
folgende Frage: Kann ich Filmmaterial, welches in 16:9 produziert wurde auch 16:9 in Premiere einlesen?
Zwar kann ich die Widescreen-Einstellung auf 16:9 stellen, aber die Framegröße bleibt dennoch bei 720 x 576 ...und das Framegrößenfeld ist auch grau hinterlegt, so dass ich da nichts ändern kann.
Weiß jemand, ob das überhaupt geht??
vielen Dank schonmal.
lg Colognie

Hi
Das Pixelseitenverhältnis ist aber nicht das gleiche wie bei 4:3 sondern 1.422.
Achim Kredelbach

Similar Messages

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Font usage in CS6 Premiere , Open and Closed quotes??

Hello
I am trying to use open and closed quotes in CS6 Premiere, without any success.
Using a Mac 10.8.5.
When I try the alt shft [ and the shift [ it only uses one side of the quote.
Any suggestions?
Is this a software, settings or OS issue?
Thank you
I am working on deadline....
Brian

One side? I'm confused. You mean want these?
But you're only seeing this?

Is there a way to create and edit a video in portrait mode / 9:16 in Premiere Elements 12 or 13. Playback on an iPhone in portrait position.

I'm editing iPhone app video for posting as the first screen in the Apple app store. Required size for the video is 750:1334, 9:16. I there a way to setup the initial video in portrait mode? Many posts for how to rotate a specific clip, but I need the whole video in portrait position. How to accomplish this? I'm using Windows 7 and Premiere Elements 12 and now 13.

LaurieFrick
Thanks for giving this portrait Edit area monitor shape a look.
I have Windows 7 64 bit and Windows 8.1 64 bit and have done the work using Premiere Elements 12/12.1 on Windows 7 64 bit.
Here is a step by step
Find the DSLR [email protected] file
Local Disk C\Program Files\Adobe\Adobe Premiere Elements 12\Settings\SequencePresets\NTSC\DSLR\1080p\
And, in that 1080p Folder is the DSLR 1080p30@ 29.97.sqpreset file that you seek.
1. Copy the
DSLR 1080p30@ 29.9.sqpreset fileI
and paste it to the computer desktop in a newly created folder named 1920p.
2. Open the 1920p Folder and edit the ..sqpreset file in Notepad.
To do that right click the .sqpreset, and, from the pop up, select Open With and then Notepad.
3. In the Notepad document, you are going to edit in only 2 places for now, switching 1920 and 1080 to 1080 and 1920 at the top and bottom
sections of the Notepad document.
Then go specifically File Menu/Save of the Notepad document and hit Save.
4. At this point, you have the edited.sqpreset file in the 1920p Folder on the computer desktop.
(Change the name of the edited .sqpreset file so that it = DSLR [email protected])
Move the 1920p Folder from there to add it to the 1080p Folder, the location where you found the original .sqpreset file that you edited.
Close out of there.
5. Back in the Premiere Elements 12/12.1, manually set the project preset to the new project preset
6. When you import your 1080 x 1920 9:16 video file into the project and drag it into the Timeline, you should see
Note that there is no orange line over that Timeline content, indicating that you are seeing
the best possible preview of the image.
7. As I wrote before,
But, here is the hang up. If I render the Timeline content to get the best possible preview at the Edit level, the video in the Edit area monitor
squeezes in resulting in black borders to the left and right of the video image on screen.
But, otherwise I found I had no problems editing or exporting, just had to keep away from Timeline rendering for previewing after an edit. Need to find the missing ingredient for 100%.
I will be writing this up in my blog in a more organized fashion including how I got the project preset description in Change Settings to agree with the changes. Probably I will do that in the morning.
ATR

At a complete impasse: Sorry, a serious error has occurred that requires Adobe Premiere...

Until I downloaded the most recent version of Premiere Pro CC (7.2.2) everything was great. Now Premiere won't work for me no matter what I try. Keep's shutting down hard. Even with brand new projects, if I wait a while it will crash. I've tried reinstalling the application. I've tried holding down the shift key at startup. Nothing seems to help. The problems all started when I renamed a file it was looking for. After trying to figure out how to point Premiere to the new file, I abandoned it and renamed it to what it was looking for. It's been crashing ever since. I've created 6 or 8 new versions, but all crash. HELP! I've got a pressing deadline and can't get past this. I'm running it on a Mac w/10.8.5.

Hi Patsy,
A few things to try for your crashing issue:
Trash preferences
Make sure the System Preferences > Language & Text is set to English
Have an AMD GPU? Certain applications, like DaVinci Resolve install CUDA drivers, even if you have AMD GPUs. This can cause issues with Premiere Pro. See this blog post.
Sign out from the Creative Cloud application and then Sign in
If you have a NVIDIA GPU, update CUDA drivers in System Preferences > CUDA
These are things that have solved similar issues for other customers. If none of these things work, send me a PM and I'll escalate your issue.
Thanks,
Kevin

Error message when downloading Adobe Premiere Elements 11

When attempting to download the Adobe Premiere Elements 11 from the cd, I'm getting an error message that reads: "The installation process has encountered an error while installing Shared Technologies. Please restart your system and try again".I'm using a Windows 7 Operating System. When I attempt the download again, I get the same error message.

Curtis Baughman
Many of us have encounted this issue. The problem is not confined to a particular version or computer operating. Many homemade remedies and scientific ones have worked for some and not others. The most recent fix was offered by an ID by the name of Maud Barbara and seems to have been the answer for that user and at least one more.
Maud Barbara's fix can be found at the end of the very long thread on the subject found
http://forums.adobe.com/thread/1121947?start=40&tstart=0
The rough Google Translate went
Hello
I had the same problem as you and I just d have the solution:
go to C / program files (86) / common files/OOBE
Rename OOBE by OLDOOBE
and your problem is resolved
You can reinstall the software
What worked for me in this case was none of the above. How I and others navigated this installation problem is documented in the thread cited.
We look forward to your results to see what turned out to work for you.
Thanks.
ATR

No Disk error in Premiere Elements 13

I am getting the following error: "There is no disk in the drive. Please insert a disk into drive\Device\Harddisk1\DR1." If i click continue about 5 times the box disappears & I can continue working. The same thing occurs at random when i am attempting to do different operations with the same result. I can work within the program, however the constant error message is annoying. I have searched these forums & tried the different methods of uninstalling & reinstalling, deleting the recommended files, & running a Ccleaner. I can't find any other recommendations on this problem. Please help!

Geewiz1955
Premiere Elements 13 on what computer operating system? For now, assuming Windows 7, 8, or 8.1 64 bit.
What is your computer drives arrangement? How many removable drives do you have, and what are their drive letters?
See Computer/Manage/Disc Management.
Reports of the problem that you are describing can be found for Premiere Elements many versions.
Back in 2012, the word was to use Cancel and wait for an answer from Adobe who was working on the problem.
In 2013, the cause and effect seem to target the SmartSound feature....SmartSound feature is gone in Premiere Elements 12 and 13.
Microsoft and some visitors to this forum suggest getting to the core of the problem through drive letter changes for some removable drives.
Did you install Premiere Elements 13 from installation disc or from installation files from online download? I favor the uninstall/ccleaner run through/reinstall with antivirus and firewall(s) approach to getting rid of the issue. But, problems with the same symptoms can (often do) have different causes.
More later.
ATR

No Disk Error for Adobe Premiere Elements 12

I installed Adobe Premiere Elements 12 to my PC. Everytime I load the software, I get this annoying alert saying that there is no disk located error. I can get it to go away if I click on try again a bunch of times, but I want to get rid of this problem. It should NOT be happening. SOME BODY TELL ME WHAT TO DO PLEEAASE!

Blue Mask
Please check out recent thread which sought to solve the disc error message that appears to be similar to what you are reporting
http://forums.adobe.com/message/6246049#6246049
There was no definitive answer. Still waiting for follow up to the latest line of questions in that thread.
Suggestions about this being a long time issue are a bit misleading. In versions of Premiere Elements earlier than 12, there was a SmartSound/Sonicfire Pro 5 feature which appeared to be linked to the disc error message. And, updating SmartSound/Sonicfire Pro 5 was claimed to be the cause and remedy for the disc error message.
http://forums.adobe.com/thread/1300410
However, SmartSound/Sonicfire Pro 5 is no longer a feature in Premiere Elements 12. Premiere Elements 12 does have a Music Score feature, similar in principle to SmartSound soundtracks, but the SmartSound feature is gone in version 12.
Please review that information in the link above and let us know if any of it works for you.
Thank you.
ATR

"No Disk" Error (premiere elements 11)

I have successfully installed Adobe Premiere Elements 11 on my PC:
     Dell XPS 8300
     Intel Core i7-2600 Quad Core (3.4 GHz, 8MB Cache)
     • 1GB Radeon HD 6450 Graphics
     • 16GB DDR3 1333 RAM
     • 1TB 7,200RPM Hard Drive (2 x 500GB RAID 0)
     • Windows 7 Home Premium 64-Bit
When I open the application and click "New Project" I get the following error message:
AdobePremiereElements.exe - No Disk
There is no disk in the drive. Please insert a disk into drive
     \Devices\harddisk2\DR3
I can "cancel", "try again", or "continue". The only thing that works is to hit "cancel" (several times). Premiere Elements will then open, but the error message will keep recurring.   Adobe Support (Chat) has not been much help.
Anyone else come across this? This seems to be a common error in earlier versions (version 9), but I can't seem to find any good solution to it.   HELP!!!!
UPDATE:   Just as an FYI..while it's possible (but doubtful) there is preloaded software interfering, there is no other software (or viruses) installed on this computer.
Message was edited by: [email protected]

Boomps, I installed from here and it worked fine:     http://helpx.adobe.com/premiere-elements/kb/installing-smartsound.html There are even step-by-step instructions. Good luck.
Date: Mon, 7 Jan 2013 04:46:21 -0700
From: [email protected]
To: [email protected]
Subject: "No Disk" Error (premiere elements 11)
    Re: "No Disk" Error (premiere elements 11)
    created by BoompsXXX in Premiere Elements - View the full discussion
Not an answer!! I am new to this. I get the same error message and from what I can gather reading the traffic, I have to reinstall Smart sound. Can anyone help a simpleton. I searched the DVD for all files referencing Smart sount, there is plenty. I don't really understand how I reinstall and what??Any help would be great!!ThanksTara
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4973936#4973936
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4973936#4973936
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4973936#4973936. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

No disk error in Premiere Elements 12 - Smartsound plug-in?

I have a fresh install of Premiere Elements 12 (with 12.1 update) on a new computer and receive the error "There is no disk in the drive. Please insert a disk into drive E:" whenever the program is opened or closed. I can bypass this message by repeatedly clicking "cancel". Windows application logs in event viewer lists a corresponding error message "Activation context generation failed for C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". I confirmed that this file does not exist.
A forum search indicates that installing Smartsound resolves this no-disk error for PrE 11 and earlier but that Smartsound is no longer a feature in PrE 12:
Re: No Disk Error for Adobe Premiere Elements 12
But another other user reported that the no-disk problem went away in PrE 12 after installing Smartsound:
Re: "No Disk" Error (premiere elements 12)
And my event viewer error message indicates that PrE 12 is looking for a Smartsound plug-in which was not included in the installation. (PrE 12 was installed via Dell Digital Delivery and did not include an installation disk.)
So why is PrE 12 looking for a Smartsound plug-in if it is no longer a feature? Any suggestions for suppressing the no-disk error other than installing Smartsound? I'm just getting started in PrE and don't need it right now.
Thanks,
Greg

Thank you for the advice. I tried Han's suggestion of installing Smartsound SonicFire first since it was much quicker than completely reinstalling PrE (which entails many hours of re-downloading on a DSL line for the program & cloud content).
After installing Smartsound, the "SmartSoundAdobePlugin64.prm" file did appear in the C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\ folder. However, it did not resolve the "No Disk" error or the application error logged in Event Viewer. The source of that error is listed as "SideBySide" and Event ID is 33. The full text of the message is as follows:
Activation context generation failed for "C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". Dependent Assembly Microsoft.VC90.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type=" win32",version="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.
I did a bit of research and this answer suggests that the error is the result of an incompatibility between the installed version of Microsoft Visual C++ and the version used by the program:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/event-id-33-so urce-side-by-side/ef67e34f-07b2-4d52-a807-f9f81a7c32f8?auth=1
Based on this Microsoft article, it appears that the missing C++ 2008 version 9.0.201022.8 is an IA-64 version while the 9.0.30729.x versions on my machine are x64 versions:
http://support.microsoft.com/kb/973552
This is all way over my head and I may leave well enough alone until I have more time to spare, given that the "no disk" error (which could even be entirely unrelated) is annoying but not crippling.
FWIW, the machine is a Dell XPS8700, Windows 8.1, 64-bit, and PrE was sold by Dell it, bundled with Photoshop Elements.
Greg

"No Disk" Error (premiere elements 12)

When making an Auto Movie in pre12, as soon as i click the next button having selected the theme that I want, I get (No disk in drive D:), but if I eject the empty tray and leave it open all works fine.

Han
It does not make sense.
The SmartSound/Sonicfire Pro 5 feature is gone in Premiere Elements 12 and has been replaced by Music Scores which is in concept like SmartSound but is not SmartSound.
I think that your happening was by chance.
Recently I had a strange No disc situation. Never had one as long as I have been working with Premiere Elements products 4 to 12 over more than 10 years.
I decided to install CONTENT for Premiere Elements 10 on Windows 7 64 bit. After all was done apparently successfully. I started to use the program and went to apply a disc menu. That is when I got hit with the No disc message. I could not get rid of it. The only thing that would allow me to continue in the disc menu location was to insert the Premiere Elements 10 CONTENT disc which seemed unreasonable since all the CONTENT could be seen saved to the computer hard drive where it was supposed to be.
I decided to restart the computer for one reason or another. Immediately after the restart, there was no problem applying the disc menu in Premiere Elements 10. I did not have to work with the Premiere Elements 10 CONTENT disc in the burner tray to get my Premiere Elements 10 disc menus applied.
This one computer before and after this incident had SmartSound programs on it related to many earlier Premiere Elements versions that are on this same computer. So, SmartSound features or files did not appear to be implicated here in this No disc matter.
So I would caution you about a jump to judgment on
but somehow still looking for those smart sound files...
Please consider if there are any alternative explanations for your results.
Thank you.
ATR

My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened?

My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened? Or how to prevent it from happening again? Thankfully I saved a backup project of the 190MB file size.

warp stabiliser?

How to install Adobe Premiere 6.0 on Windows Vista

I purchased Adobe Prmiere 6.0 11 years ago and installed it on my computer which was running Windows Millenium at the time
I now wish to install and run this program ( Adobe Premiere 6.0 ) on my Window Vista.
I have the serial number
When I try and insert the disc and run the program with autorun in the pop up box that appears nothing happens
So I go to Start--My Computer--Disc--Explore--I chose Autorun and I get this message
" The version of this file is not compatible with the version of Windows you are running.
Check your computers systems information to see whether you need an x86(32 bit)
or x64(64 bit) version of the program and then contact the software publisher "
My computer is running a ------64 bit Operating System
2 Duo CPU 2.80 GHz
So now what do I need to do ?
Is this a lost cause.
Can I get this program and it's software to run on Vista ?

You should post to the Premiere CS4 & Earlier Forum, as this is for Premiere Elements, a different program.
There are several people, still using Pr 6.0, who frequent that forum, and might have some insight on which OS's, it will install and run on.
Good luck,
Hunt

Media Encoder CC conflicting with Premiere Pro CC

Why does Adobe Media Encoder pause while exporting a video when I try to edit another video in Premiere Pro?
On the older version I was using before I upgraded, they would both run simultaneously.
Also, is there a phone number that I can call to get direct support from Adobe?
Computer Specs:
Mac OS X ver 10.9.5
2.7 GHz Intel Core i5
16 GB 1600 MHz DDR3
Intel Iris Pro 1536 MB
Software:
Adobe Premiere Pro CC
Ver 7.2.2 (33)

Ask in the Premiere forum.
Mylenium

Media Encoder CC 2014 using cached versions of Precomps in AE and Nested Sequences in Premiere?

I'm seeing this weird thing where Media Encoder is using older versions of certain assets when exporting a Premiere Pro CC 2014 sequence. I'm seeing issues with nested sequences...Media Encoder uses an old version of a linked AE comp or it doesn't render a certain video track. With linked AE comps...I'm seeing Media Encoder use an earlier version of a precomp within the main comp.
When I look at the video in the Export Settings dialogue in Media Encoder, the old version of the AE comp shows .
If I look at the Export Settings dialogue in Premiere, it's up to date and looks right.
Anyone dealing with this or found a workaround? Thanks!
Calvin

I don't think I'd call this issue expected behavior...at best it's anticipated behavior that's going wrong. The only reason I wouldn't call it expected behavior is because what I'm seeing is AME reverting to a cached state on a FRESH LOAD of a sequence to render directly from Premiere. Basically, AME isn't open...sequence looks fine in PPro...load into AME via PPro export...look at export settings dialog in AME and note that the sequence is the old/cached version. So, it's not like the export was already in AME and THEN I made changes in PPro. It appears AME might be incorrectly identifying the newly imported sequence for export as an older, cached version.
However, I didn't get a chance to test your original solution so I'll try that the next time I see it happen. I also fixed the issue by clearing out the media cache and databases. NOT an elegant solution at all and TOTAL overkill...but it did work.
Thanks for the links!

Media encoder cc pauses while I edit in premiere cc!

If I try editing in premiere cc while encoding in media encoder cc, the encode pauses. what gives?

If you'll notice your encoding in AME, it normally maxes out all your CPU cores. It does mine. This is awesome!
But, if you want to edit, you need those cores, especially with Long-GOP footage that relies on CPU for real-time decompression. So, in effect, you're telling your computer to let Pr take over the CPU when you start editing in Pr.
It's a pretty smart way that Adobe enabled this behavior, if you ask me.

16:9 in Premiere???

Similar Messages

Maybe you are looking for