16:9 showing on widescreen monitor with bars

Hi - I shot on a Z1 in 16:9, I imported as DV PAL anamorphic. It shows fine in the viewer and is full screen on a widescreen monitor. But when I edit it onto a 16:9 sequence it appears with black bars top and bottom in the canvas and on the monitor. Is it supposed to?
I can go into the Motion tab and change the aspect ratio to 0 to make the image full screen, but shouldn't it do this automatically?
Appreciate your help.
Bhavesh

Were your clips already on the timeline when you changed your sequence settings to 16x9?

Similar Messages

  • Monitor with bars when battery low

    Hello,
    just bought a brand new 13' 2,9 MAcbookpro. IMy monitor is coming up
    with some kind of grey/black vertical bars, not waking up normally.
    This behaviour is happening when mac has a low level battery.
    Any suggestions, thinking of returning the computer to the mac shop.

    Hello,
    below the info
    Battery Information:
      Model Information:
      Serial Number:          9G2510SK9D3MB
      Manufacturer:          DP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          201
      Hardware Revision:          2
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          3114
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5735
      Health Information:
      Cycle Count:          2
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1729
      Voltage (mV):          11222
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          5
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Standby Delay:          4200
      Standby Enabled:          1
      Battery Power:
      System Sleep Timer (Minutes):          0
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          0
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      Standby Delay:          4200
      Standby Enabled:          1
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Besides that, finally went to the vendor. Opened MBP,reseted motherboard manually and found out that the flexible connection with the display was assemled a little bit loosy. Put it back again correctly, and now seems everything fine for the moment. I wan to discharge the battery and see what happens.
    I'll keep you informed, thanks for the responses.
    Cheers

  • Using Envision G22LWk Widescreen Monitor with J105 Series 8258-HAU

    My system is an AMD Athlon™ 64 3200+, 512MB, 160GB 7200RPM S-ATA HDD, no diskette drive, PCI/AGP Tower (4x4), VIA S3 Graphics UniChrome Pro IGP, Multi-Burner Plus 16x, VIA 10/100 Ethernet, Windows XP Professional.
    Although I have installed the following upgrades:
     VIA S3 Graphics UniChrome family display driver for Windows 2000 and XP - 3000 J105 (type 8257, 8258...
    and
    Flash BIOS update - 3000 J105 (type 8257, 8258, 8259, 8458, 8459, 8460) / ThinkCentre E51 (type 8463...,
    my computer still will not recognize the widescreen format, so the graphics are now horrible.
    VIA graphics says the problem lies with the Lenovo BIOS, but I've already installed the Lenovo BIOS update.
    Please help!  

    i presume that you have already installed the video bios update with the link you provided i think that your graphics card may not support wide screen display as of now..but not to worry may be you will have an update soon that may solve your problems on the other hand did u try using the lenovo system update program u check it out periodically may be the package index server will have the download
    and hey if you have never hear of a utitilty called "everest home edition" pls download it from the below given link
    it not only provides detailed system information but also necessary links for driver downloads just check this out as well
    http://majorgeeks.com/download4181.html
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • M30: FX G05200 + external Widescreen Monitor: Resolution 1440x900 not available

    Hi!
    I`ve got the following problem:
    I`d like to connect a external TFT Widescreen Monitor with a native resolution of 1440x900 to my Satellite M30 with a GeForce FX Go5200.
    But: It is not possible to adjust the resolution of the Graphics Card to 1440x900 (16:10), there are just standard resolutions (4:3) available.
    I tried nearly everything:
    - installed Monitor Drivers ==> no effect
    - updated Drivers for the Go5200 (to 4644) ==> no effect
    - updated Bios (to 1.7) ==> no effect
    - Tried RIVAtuner and PowerStrip ==> no clue = no effect
    Now Im pretty helpless and I dont know what to do...
    Maybe someone faced the same problem here and found a solution.
    Thank you for your help.
    Christian

    Got the solution:
    http://www.laptopvideo2go.com/forum/index.php?showtopic=9243

  • YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

    YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
    I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

    You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

  • HP w2207h Widescreen Flat-Panel Monitor with BrightView

    I have an HP w2207h Widescreen Flat-Panel Monitor with BrightView Panel. Can't find the software download link for the BrightView part of it. Can anyone help me to locate that link again? Thank you

    Hello hermette,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are looking for the software for your HP w2207h 22 inch LCD Monitor. I am providing you with the HP w2207h 22 inch LCD Monitor Drivers page for your monitor. Simply click on the drop-down box and select the operating system you wish to download the software for and click on the NEXT button. Scroll down the page and you will see your drivers and/or software.
    ***NOTE: If you do not see your operating system in the drop-down then HP has no software or drivers that are supported and you will have to use the default Windows drivers. This could prevent you from being able to utilize some of the higher functions available to this monitor.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • New LG204TW 20" widescreen monitor shows black lines ??

    Yesterday I picked up the new LG L204TW widescreen monitor for my Intel Mac Mini.
    The display is detected by OSX and I can run the native resolution of 1680x1050 @ 60Hz. via DVI.
    But there is a sort of flickering of the screen. Actually there are black horizontal lines showing up. This happens mostly when browsing.
    When I open for example a Quitime window and move the window of the playing video over the black lines, the lines are gone. So I think it is not the display itself.
    Changing the resolution does not help. Any idea how this can be solved?
    Regards,
    Armand
    Mini Core Duo, iMmac Core Duo   Mac OS X (10.4.7)  

    Hook up another monitor that you have and see if it is your mac, if it isn't your mac then take the LG screen back to the shop, ask for full refund and consider another monitor.

  • On start up my mac book pro shows a white screen with a folder with a ? in it then switches to the apple symbol with the loading bar under it but it freezes about half way any ideas

    My mac book pro on start up shows a white screen with a folder with a question mark in it then switches to the apple symbol with the loading bar under it but it freezes about half way. Only started to have problems since upgrading to yosemite any ideas.

    I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed:  OS X: About OS X Recovery - Apple Support

  • Face time picture shows with "bars"

    When I use face time while traveling I'm having issues with the screen. We start the conection with their faces covering the complete screen (holding my iPad vertically) and then all of the sudden changes and they show in a letterbox with black bars top and bottom (kind of the annoying Skype). Is there any setting I should use to make sure that while I hold my iPad vertically the screen will be full?
    My home uses a MacBook or sometimes an iPhone
    Thanks

    Try the standard fixes:
    -  Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from ackup
    - Restore to factory defaults/new iPod
    If the shutter still will not open time fro an appointment at the Genius Bar of an Apple store. Also see:
    Camera Shutter

  • I downloaded an iBook and was reading it, closed it, tried to reopen it, but it just shows on my shelf with a black load bar at the bottom as if it has to load. ???

    I downloaded an iBook and was reading it, closed it, tried to reopen it, but it just shows on my shelf with a black load bar at the bottom as if it has to load. ???

    My first step would be to get rid of "Norton protection". Boot from your OS 10.6 disc, navigate through your hard drivve and trash anything that is Norton. Empty the trash.
    Next, run Disk Utility and ask it to repair the hard drive.

  • Adobe Acrobat Professional X - shows blank dialog boxes with vertical bars

    The file and print screen and the file and properties screen both show mainly blank screens with vertical bars only on them, no text at all.
    Looking around the forum I found it may be a font problem.  Is there a way to know which font or if that is actually the problem and how do you resolve that?
    This is on a Windows 7 - 64bit system with Adobe Acrobat Professional X (10.1.12) installed.
    Thank you.

    Hi brian!
    Please see Re: Blank dialog boxes in Acrobat X Pro
    Let us know if that does the trick!
    Best,
    Sara

  • During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?

    During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?

    Same here after upgrade yesterday. 
    I can get OS utilities up using CMD R or holding the shift key (eventually), but if I simply then reinstall the OS will it not loose everything on my drive? I do have it backed up on Time Machine? What a nightmare - Apple Support does suck.  I am not paying £25 for them to call me to tell me how to fix a bug in their OS software upgrade.  Any help
    Also does anyone know if it is possible to use time machine to go back to Snow Leopard? I have wasted much of the day on this now
    Cheers
    Simon

  • Display shows a spinning disc with a magnifying glass and the volume bar?

    My ipod display shows a spinning disc with a magnifying glass,
    the volume bar is underneath...and none of the buttons work.
    Is this it? Do I need to buy a new one? I wouldn't be surprised, it's almost 3 years old and I've never had a problem with it... but still! Any ideas what I'm looking at? thank you!

    Gotta love the internet. Here's what I found about this display message.
    http://playlistmag.com/help/2004/09/trubipod/index.php
    Symptom: The iPod displays the image of a spinning disk and magnifying glass.
    Cure 1: Congratulations! You've managed to initiate the iPod's built-in disk scanning test. This is normally done on the first three generations of iPods by resetting the iPod and then pressing Previous, Next, Menu, and the Select button. This icon isn't available on the mini and fourth-generation iPods.
    If you've initiated the scanning test and don't wish for it to complete, reset the iPod. If you'd like to complete the scan, plug the iPod into a power source as the test drains the battery quickly and takes between 15 and 20 minutes to complete.
    Hopefully all is well.

  • HT201263 my iphone 3g Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes ..plz give me suggusition ?

    Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • TS1363 my iphone 4s is stuck where it shows the apple logo with loading bar but does not d o anything itunes shows  waiting for iphone, how do i fix this

    ok i have an iphone 4s ios6 on windows7 and every time i try to restore in itunes my iphone gets stuck showing apple logo and loading bar i have had it pluged in for over 3 hours i have tried i recovery ,ireb,tinyumbrella none seem to help ,any ideas if thers a solution for this

    i have the same exact problem and im so frustrated. if you find a soulution can you let me know? i've been looking for ages and even tried a different computer

Maybe you are looking for