16:9 with added effects becomes 4:3 when I export it.

I have recorded some footage in 16:9, imported it in iMovie HD, edited it, added some effects, and now I´m trying to export the project to my camera. The problem is only that the parts where I have added an effect turns into 4:3 once I export it. The parts where I haven´t added an effect are still 16:9, which means it switches between 16:9 and 4:3 in the same project. In iMovie it is all 16:9, but obviously something goes wrong when I export it. Does anybody know why?
I´ve also tried to make a quicktime file from the same project, and in this case the whole project turns into 4:3 - at least that´s how it appears when i play it in quicktime or VLC, for that matter. Any ideas what I could do to keep it 16:9?

Welcome to the  Discussion Forums.
There are no effects in im08 and suspect you are using an earlier version of imovie. You might get a better response if you post in the appropriate forum.

Similar Messages

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR

Power Ups with added effects

So yah the titles not clear but a lot me to explain. R1 has always been the weapon button in LBP games. However LBPK It seems to be L1 which brought me to a interesting thoughtWhat if each power had two functions? One that's on L1 that can be disabled And enabled.Grabinator - a Melee Punch with a charge up that's Like a super slap. Possibly could be used in Versus modes. And Possibly a easy way to save thermo space Grappling Hook - Duel Hooks that act as Long range appendages. Like for example: a Button that's ungraspable over a pit of spikes with no jet pack in sight., By holding L1 u can target the button using the left stick or automatically with a tag . Again another weapon good for lower thermo in non Sackbot versus levels Jetpack - Holding L1 And pressing up or down you can switch Layers, * this would also apply to swimming, which could be disabled in the tools bag. * Simple ideas but I doubt it'll be implemented. It kinda takes out some fun in experimenting with tools And stuff

Welcome to the  Discussion Forums.
There are no effects in im08 and suspect you are using an earlier version of imovie. You might get a better response if you post in the appropriate forum.

HT1473 Im having a problem with adding cds to my library when some of the discs in a set have Gracenote information and other discs don't. iTunes in this situation puts the css that are part of a set into different albums, and I don't know how to combine

I'm having trouble adding "spoken word" CDs that are in a set to my library. When some of the discs have "gracenotes" info the album gets broken up as if each cd was a separate album. I haven't been able to figure out how to have all the cds in the set appear as one album. I have entered each one in the "get info" page as "1 of 7" and "2 of 7" etc, but the ones with gracenote info get put into a separate album. It's frustrating so far! Also, when I want copy an album to the burn folder so i can share it with a friend, it moves the songs as songs, not as albums. Any way around this? Thanks very much!

See Grouping tracks into albums.
PS, you don't have the right to burn copies of the songs you've bought/ripped to give away to your fiends...
tt2
Message was edited by: turingtest2

Can I send a PDF with added comments via email? When the reciever of the email opens the PDF they don't recieve any of the comments.

I currently use the free adobe pdf reader. I am allowed to comment on PDF's but when I save the file and send the file with the comments the receiver of the email does not get anyy of the comments. Can anyone help?

Hi Anubha,
Thanks for your reply.
I tried sending myself a pdf document with comments from one email account and I sent it to another email account. I still get the same problem. I basically receive a pdf document with no comments.
Am I doing something wrong?

Why does Illustrator keep adding a "-01" to filename when saving/exporting?

Is there a way to turn this off? I can't overwrite files like i want. When i either save or export a file, Regardless of what i name it, when i click save, Illustrator is automatically adding a "-01" to the end of the filename. Then i have to go back in and manually delete the old file and change the new filename by deleting the "-01" on the end. This has caused me to delete the wrong files a few times.
It's annoying and i'd like it to stop!
Thanks!

Actually, unchecking the "use artboards" only works to a certain degree. If you have any artwork sitting outside the artboard, it shows up in the saved or exported file. That can be a problem if you like to open Illustrator files in Preview to make quick PDF proofs for clients (like I do) or need to open the file directly in Photoshop. In that case, you're forced to check the "use artboards" option in order to hide any temp/sidelined art, which triggers the numbered naming scheme.

QUADRO CX & Open-GL problem with After Effects

Hi,
Im using Adobe After Effects CS4 on my 8-core intel machine with a brand new QUADRO CX graphic card i just bought.
With After Effects I noticed that when I apply the Turbulent Noise OR Fractil Noise and turn on OPEN-GL it shows a different pattern than when I turn off OPEN-GL in AE.
I think this is a problem with OPEN-GL. Does someone have the same problem? What do I need to do? I mean I bought this card for a high price and it shows me this strange problem..
Thanks!
Faysal

Most likely it's a bug that somehow skews the random seed. Beyond that - no idea. I'm still saving money for a new computer and a CX simply isn't in the budget, so chances are slim that I will ever be useful in these matters. ;-) Just make sure to file it on the official bug report form: http://www.adobe.com/go/wish. Otherwise, as a joint venture product, the CX certainly comes with some kind of extended support on Adobe's end, so a call to support might provide some help (after the 5th of January).
Mylenium

Table of Contents become not clickable when I convert Pages to PDF

Hello,
I created a document in Pages but the TOC becomes not clickable when I export it to PDF. I tried "Print as PDF", too but didn't work. Is there a fix or workaround? I am working on User Manual for a new system for my company and not many people will be able to use Pages document.
Thanks!

What version of Pages?
Sounds like Pages 5.2.2. They are supposed to have fixed that, but seems you are still having the problem.
If you are doing a manual you will be far better off using Pages '09.
Pages 5.2.2 has so many features missing. and is buggy to boot.
Peter

Only sound, when I export HDV project with Quicktime

I'm working with Final Cut Pro 5.0 (yes I know I have to upgrade) with material from HV 20.
When I export my finished project with the export to Quicktime opt. I can't watch the movie in Quicktime player, Itunes, VLC or MPEG Streamclip, only in FCP. The Sound is there but know picture.
since I do not yet have DVD Studio I know have a problem, since I cannot make a DVD out of it.
Or can I? Why is there no picture? How can I do it the best?
I also tried exporting it through compressor to H.264 and quicktime. That as well didn't work.
Grateful for help!!!
/David

Make sure that you have the current HDV codec present in your /Library/Quicktime folder. If you don't have the codec you will sound but no picture. The codec is automatically installed when installing FCS--but interestingly I had to manually install it from the FCS install packages using Pacifist when I upgraded to Leopard (on my PPC machine, the Intel one was OK).
Unfortunately Apple does not make the codecs available for download--which makes no sense. If you want to pass an HDV movie over to another machine you must manually install the Apple HDV Quicktime codec. I don't even know if Apple considers this some sort of violation of their License.
--Robert

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

Help with adding video effects.

Okay, so I am very new with Adobe Premiere Pro CS3, and decided to start working with video effects.
So far I can add an effect onto a video clip that I dragged down from the source monitor, but that applies the effect to the whole video track. I want it to start and end at a certain point.
I have read the Adobe Help Viewer on effects many times over and over, but still, I cannot get it to work.
I have set in and out put points in my Timeline, and went into the effects controls and peaked around, but have had no success at all with getting my effect to start and end at a certain point.
Can anyone help me out a little bit? I'm sure you are all Pro's at this, haha.

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Problem with keyframe effect - at start and end (crop and scale)

I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?

Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan

Success with adding an external eSATA drive to a Verizon FIOS DVR

August 4, 2012 - Success with adding an external eSATA drive to a Verizon FIOS DVR
I just upgraded from a Comcast DVR to a Verizon FIOS DVR. I upgraded because my old DVR was limited to 500GB (1/2 TB) on the internal drive and the new FIOS DVR allowed for a much larger external eSATA drive. Selecting a viable external drive for the FIOS DVR was easier said than done. The three drives listed on the Verizon web site as compatible with FIOS DVRs are no longer manufactured by western digital and are not available on the market.
The DVR that I received from Verizon was a Cisco "CHS 435 HD DVR" that came with a 500GB (1/2 TB) internal drive. This is one of their "Multi-Room DVRs" that allows other set top boxes (not DVRs) to watch videos recorded on it.
I selected a western digital "WD30EURS" eSATA disk drive because it was a follow on product to one of the three listed as acceptable by Verzion on their web page and it was 3TB in size. I ordered from amazon.com for $170.99. This drive is a "bare drive" so it does not come with an external encloser or a eSATA cable.
According to the Western Digial web site this is a AV-GP drive: "These drives are designed to last in high temperature always-on, streaming digital audio/video environments such as PVR/DVR, IPTV, and video surveillance systems."
http://www.wdc.com/wdproducts/library/AAG/ENG/2178-771131.pdf
I got a "Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD" to hold the drive for $34.39. I chose this one because it does not use a fan that could cause continious noise. The box is made out of metal so it cools itself as long as it is exposed to air (not covered up). This box comes with an external power supply that has a small transformer that plugs into a wall outlet.
Then I needed a eSATA cable. I got a "StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)" for $6.50 and a 3-foot version for $5.90. I went with the longer one so that the cable would be less likely to become accidentally unplugged if I need to move the drive or the DVR. The cables and the drive houseing came from the same Amazon provider so it saved me on shipping. The drive came from Amazon/Western Digial directly but they do not have external housings or eSATA cables on that site.
The total cost was $255.56 including shipping for all these items.
I went with the largest (3TB) drive from western digial's AV-GP line to avoid a future upgrade from a smaller drive to a larger drive. There is no way to copy videos from one external eSATA drive to another drive because they are formatted by the FIOS DVR in a propriatary format. That would mean that any future upgrade would require losing all recorded files during an upgrade. That also means that there is no way to back up the contents of the drive to protect yourself from hard drive failure.
The installer who setup the DVR did not want me to plug in the drive while he was there and explained that I was on my own when I attached this kind of personal device to the DVR. When I plugged in the new eSATA drive it was automatically discovered. I was asked by the DVR if I wanted to format the new drive. I answered yes and within 2 hours the drive completed formatting. I did not watch the boring format so it could have finished faster.
When I started recording new videos they go directly to the external drive automatically and avoids the internal drive. It had no trouble recording two HD shows and playing a recording at the same time. I now have 20 hours of HD video recorded and the 3TB external drive is 17% full. So far my experience with the external drive has been great. No problems or issues. Learning the new remote control, new DVR menu system, and web browser control of the DVR from a laptop is another story. It will take some time to figure out how to make all the new features work.
It took me a while to figure out how to make this work since the verizon web site made useless suggestions and pointed me to products that are not available any more. I could not tell if this really would work until I plugged it in and then I was pleasantly suprised that it did. I have had this working for 3 days without any issues. I hope this post makes it easier for you to add an external eSATA drive to your DVR.
Here are the three items ordered from Amazon to make this work:
Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Driv...
Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD
StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)

You are right. I can only access 2TB of my 3TB external drive. That gives me a total of 2.5 TB counting the internal (0.5 TB) and external (2.0 TB) drives. This is a significant improvement over the just the 0.5 TB internal drive. I have not been able to find a reason for this limitation. Cisco and Verizon do not mention any limits that I can find. I hope that a future BIOS upgrade could provide access to more space but this would probably require me to reformat the drive and lose everything recorded.
I paid $170.99 for the 3 TB WD30EURS drive at amazon. I could have gotten away with spending only $116.99 for the 2 TB WD20EURS drive. Not worth returning at this point so I will stay with it. Makes me glad I didn't buy the most expensive 6 TB external monster drive available from another company.
I bought: 3TB drive: Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Drive WD30EURS by Western Digital
I could have bought: 2TB drive: Western Digital AV-GP 2 TB SATA II Intellipower 64 MB Cache Bulk/OEM Internal Hard Drive - WD20EURS by Western Digital
Details of what I learned:
The external 2 TB drive now has 41 hours of HD video recorded and claims to be 34% full (66% free). My estimate would allow me to have aprox 120 hours of HD on the external drive (2TB) and 30 hours of HD on the internal drive (500GB) for a total of 150 hours of HD. This will keep me happy for the near future.
There is a hidden "diagnostic menu" that is not normally accessible or documented by CISCO or Verizon. This menu has a lot of interesting info on the inner working of the DVR. There was an obscure reference to this menu on another forum.
To access this diagnostics menu:
1) Get the DVR into normal live tv mode (no menu, no guide, no pause ...)
2) Go to the Cisco CHS 435 HD DVR (not the remote control) and press these buttons on the front of the DVR: Press both the Left Arrow "<-" button and "OK" button at the same time and hold them both down for aprox 5 seconds.
3) The "Verizon FiOS TV Diagnostics Menu" menu will appear. The menu can then be used by the remote control.
4) I chose "D03 Memory / HDD" and then "Hard Disk Information" and finally "OK"
A five page disk report appeared. With a little bit of interpretation I discovered:
The Internal Drive is know as "drive 1/hdc1" has 461 GB total space with 454 GB free.
The External Drive is split into two partitions "hdc2" and "hdc3" (aka two mount points).
"drive 2/hdc2" has 1007 MB total with 317 GB free
"drive 3/hdc3" has 1007 MB total with 974 GB free
The normal DVR menu has an "Eject" feature that allows you to stop the external drive and make it safe to remove it from the DVR without losing anything via an unplanned drive removal. This can be found at "DVR" button on remote then "Settings"->"External Hard Drive"->"Eject".

Need help with gunshot effect in FCP

New to FCP and am trying to add a gunshot effect to a short film. Doesn't have to look top notch...just looking for something simple.
I added a muzzle blast for the shooter from detonationfilms.com, which worked great. When i overlayed the muzzle blast, the background was black. I was able to fix this by using Modify>Composite>Screen.
Now I'm trying to add the bullet hitting the victim, but all the shots from detonationfilms.com have white backgrounds. For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? Are there any other websites that have bullet hits with a black background? As I said, I'm not too picky.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple).
Thanks! Much appreciated.

welcome to the family. We're not really here to help you with practical effects and filmmaking tips, we're here to help you with the software. But we'll see who shows up.
For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? < </div>
Screen drops out black pixels. It's not really the best way to get luma key effects but it's quick and easy for high contrast effects footage that is delivered on superblack. Try a luma keyer to key out the white.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple). < </div>
Should have been done as a practical effect while shooting. A simple squib and blood packet would have been FAR easier to deal with than rotoscoping and hand painting. You need After Effects or, if you have Motion, crack the manual and get set for some long sessions. There is nothing simple about handpainting on a moving object.
bogiesan

Issues with replacing clip in Premiere with After Effects composition

So basically, i want to track a title to a piece of footage, so i've made my ins and outs and my footage is placed on my timeline in premiere with my title over top. Now I select the two pieces in premiere (the title and the clip) and I hit replace with after effects composition, and it ADOBE does it's thing etc.
but now in my AE project window I have two copies of my title file and two copies of my mp4 clip.
two of them are pre loaded into my timeline and the appropriate ins/outs which is perfect but I can't seem to do anything like tracking to them,
in my project window AE is referring to the ones that show up in the timeline as "compositions" while the extra files that aren't in the timeline are "mp4" and "psd" (the actual file types)
now. if i just delete the two "compositions" that are masquerading as files in my timeline and drag down my mp4 / psd then my tracking becomes available and all is wonderful
EXCEPT
my in's and out's from premiere aren't there and I have to go about all of that all over again and it's very annoying
any ideas?

Copy that! Thanks for the help as it is!
I'll likely have to do as you suggested in the interest of my turnaround but if anyone else out there has any suggestions for my original question of utilizing the dynamic link between PP and AE without the issue mentioned I'd be super stoked!

16:9 with added effects becomes 4:3 when I export it.

Similar Messages

Maybe you are looking for