16 bit/32 bit comps and Illustrator?

Is there a way to get AI to run/produce 10/16 bit files?
Is there a way to use AI to make broadcast ready gradients?
Is there a convertor/workaround?
At the moment I have to remake them myself and then get into arguements.
Designers do not generally understand 8 bit limitations.
If not, maybe a 10/16/Linear version of Illustrator is needed?
Tris

Nope.
Mylenium

Similar Messages

Window XP 64 bit (SP2) and Illustrator CS5?

Will Illustrator CS5 run on a 64 bit OS (windows) generally and does anybody know if it will run on Window XP 64 bit (SP2)? I tryied to find SP3 for Windows XP 64 bit as I think CS5 needs SP3 but haven't found anything.
Has anybody any knowledge or experience there?
Thanks
Ina

Hi ,
New on the block, need some input concerning Win7 64Bit; Just got a new Asus G73SW-BST8 with the sole purpose of making it a work
station to do my graphic design work, I've been combing the web looking for an answer to "will AI CS5 run on my new Asus laptop", my employer has
supplied me with new software, Adobe Photoshop / Illustrator CS5 so I can finish projects at home on weekends or snow days or if i am home sick.
Adobe was very clear about Phot CS5 working on the 64Bit OS, but very little info or hard to find concerning Illust. CS5.
Any input would be greatly appreciated,
Thanks, Pancho.

Black bar in 32-bit comps!?

Hi,
Most of my work I do as 8-bit comps in Ae. However, I recently wanted to play with some overbrights in Trapcode 3D Stroke, which can only be realised in a 32-bit composition.
Whenever I watch the comp, scrub through it it looks OK, but as soon as I play it as a RAM preview, a black bar appears at the top 3rd of the screen (and no, there's no mask or solid covering that area). I thought I had to update my nVidia drivers (I have a Quadro FX 4800-card), but alas, to no avail.
This also works its way through the rendered out versions.
The problem persists (or perhaps worsens) whenever I switch the comp back to 16-bit color space:
Now the top half of the screen is repeated and divided up into a repetitive cycle.
Only when I switch the comp back to 8-bit, the problem is solved.
In this comp, I did use a sequence of JPEG (8-bit files). But the problem seems to exist in any new comp or project set to 16 or 32-bit.
I have a 64-bit windows 7 professional quad-core workstation with 18GB of RAM.
Any ideas?

I thought I had to update my nVidia drivers (I have a Quadro FX 4800-card), but alas, to no avail.
But you're still using OpenGL?! Why not simply turn it off? AE can happily go without it. You're right on the money as far as I can tell - from what it looks like, it's a graphics card issues. Either a color space conversion issue on teh graphics card or some weird stuff with shader programs not being executed fully. Hard to tell, but as a start realyl do try to turn off OpenGL and then look into your driver config. Many times the latest driver is not the best one, so try an older driver version...
Mylenium

Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi

On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted. After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print. Ran Windows Fix and the HP fix programs. The only thing that solves it is to reboot the computer. A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes). Firefox still connects OK when this is happening. So I suspect the problem isn't with the printer, but with my Windows set up. It is a fresh XP SP3 install (hard drive crashed, but it happened before also). I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
Hoping that someone else has run into this problem. Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps.

If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
http://www.mozilla.com/en-US/firefox/all-older.html
Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
I had to disable extensions: Flashblock and WOT
Firefox SafeMode? - A troubleshooting mode.
1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Hope this helps you out.
Feedback is appreciated especially if this helps you out.

When will Firefox offer a 64-bit version ? I use my 32-bit Firefox,but keep my 64-bit Waterfox and Pale Moon ready, when Firefox crashes on Windows 8.

I am a Firefox Veteran. Been around since the NCSA web browser days and used the first Firefox web browsers. I have never liked or trusted Microsoft Windows, so I've never used Internet Explorer. I had tweaked Windoze Blue Screen Of Death software from the Windows 3.0 days and did minor maintenance on the "Pizza Boxes" to keep them alive until I or my duty station could afford a newer one. Firefox has always performed for me working for "Uncle Sam" or at home. I keep Firefox and the versions: Sea Monkey, Aurora, Nightly on my laptop because I like Firefox and I like to switch from one browser to the other sometimes -- plus, in a Windows crash, I have a backup browser. Windows always "Crashes"; somethings never change. My 32-bit Firefox doesn't seem as reliable on my 64-bit 'Windoze' 8 as it was on Windows 7. My hope is that some of the Firefox Gurus have a 64-bit Firefox up on blocks in the shed out back ready to rock and roll or at least release as experimental to be played with and tested. Thanks guys -- Keep up the good work. Sam

Someday. This is a question asked multiple times but the answer is always the same, there is no real benefit to moving to 64 bit Firefox, and the amount of work required to do something with no benefit makes this a low priority. Eventually it will happen, but just because it uses 64bit doesn't magically make things better.

Vista 64 bit OS and iTunes

I am getting an error message when initializing iTunes.
iTunes was not properly installed. If you wish to import or burn CD's
you need to reinstall iTunes.
I uninstalled, cleaned the reg, and reloaded a few times.
Diagnostic DVD/CD test results "Upper Filter Status Failed" (no CD Rom Driver found)
All seems to be working ok otherwise and CD's seem to be importing OK
Bud
Message was edited by: idraliv

iTunes doesn't officially support 64 bit Windows and the 64 bit Gear drivers you need for burning arn't supplied. You can download them from here:
http://www.gearsoftware.com/support/drivers.cfm
A number of people also had problems with the creation of the CD configuration folder, but as your iTunes is working, I guess that doesn't apply to you.

Really bad banding and artifacts in 16-bit layered greyscale file. Bad banding is retained when converted to 8-bit with No flattening. Flatten 16-bit image and banding and artifacts disappear even with no dither or noise layer. Is this a known bug?

Has anyone else experienced this?
I thought it was a monitor problem at first, but I'm using a 10-bit per channel Eizo. It seems to be a Photoshop bug based on many layers interacting with each other. When I flatten everything is fine. But I need to work on this image with layers and decent fidelity. Interestingly when I convert to 8-bit without flattening (and utilising the dither function to potentially reduce banding even further), it uses the terrible artifact laden/banding to do the conversion even though when I zoom into 1:1 in my 16-bit document it looks fine. But 50% or 25% zoom I suddenly get these awful artifacts.
Here's some screenshots to clarify. Please note I've used Photoshop for 24 years so I'm no slouch but this is the first time I've seen this. The problem is I need to do some subtle airbrush and texture work on this and it's almost unusable unless I flatten (please note, it does the same in the original 8-bit file and just to say I Gaussian-Blurred every layer with a 30px radius after converting to 16-bit so the there's no longer any 8-bit information in there or reasons for banding/artifacts). I can only think it is some of bug in Photoshop's layering engine.
Has anyone seen this before - dealt with this before?
Thanks in advance.
Not sure these embedded images will work.
8% zoomed - see all the strange banding and triangular artifacts
<a href="http://imgur.com/izrGuia"><img src="http://i.imgur.com/izrGuia.png" title="source: imgur.com" /></a>
Flattened view - all smooth:
<a href="http://imgur.com/Pn35IAK"><img src="http://i.imgur.com/Pn35IAK.png" title="source: imgur.com" /></a>
50% zoom, still there:
<a href="http://imgur.com/Z207hFd"><img src="http://i.imgur.com/Z207hFd.png" title="source: imgur.com" /></a>
100% artifacts disappear:
<a href="http://imgur.com/6aGOz0V"><img src="http://i.imgur.com/6aGOz0V.png" title="source: imgur.com" /></a>
100% 16-bit layered
<a href="http://imgur.com/0XJfe5e"><img src="http://i.imgur.com/0XJfe5e.png" title="source: imgur.com" /></a>
and finally 8-bit layered converted from 16-bit with dither.
<a href="http://imgur.com/PSxiu43"><img src="http://i.imgur.com/PSxiu43.png" title="source: imgur.com" /></a>
help!

I can't speak to why, perhaps someone more knowledgeable than I can speak to that. But if it only happens at certain views then it's purely a display issue; it won't happen in print or when you downsample to display size. Such banding issues have always disappeared for me when I output to 8 bit.
I'd assume that it's because of your monitor; it can't display all the colors and when zoomed out there's too wide of a range in a small area so banding occurs. But that's just my guess.

I just bought a new computer. My old computer was a 32bit system but my new one is a 64bit. I own ps cs6. My question is"will I be able to deactivate ps on my old system, and download the 64 bit version and install and activate it or do I have to buy t

I just bought a new computer. My old computer was a 32bit system but my new one is a 64bit. I own ps cs6. My question is"will I be able to deactivate ps on my old system, and download the 64 bit version and install and activate it or do I have to buy the 64bit version in order to move forward.

Nope, you can install it on your new computer with no issues. The disc contains both the 32 and 64 bit versions.
Benjamin

64 bit mode and some questions

Happy New Year all,
Just once I'd like to start up in 64 bit mode. I've tried to do it several times without success and I don't know what the problem is. Hardware, software?
I'm running two 10.6.2 systems, one on 1 SSD 3 drive Raid 0 array, one on another. Both internal and I used SoftRaid to set both up.
Each time I try, I get the gray screen with Apple logo and the spinning wheel. After a time I get the circle with a bar through it and have to use the power button to shut down. When I tried it last time on one array, the above happened and both arrays unmounted. I could only get my disks mounted by booting from a clone and both systems, the 32 and 64 bit, did not show in the Startup Disk Pref Pane. Both systems showed up when I pressed the Option key at start up but I couldn't start up from either.
I should have remembered to press the 3 and 2 keys to get access to those drives again but a PRAM reset got my 32 bit system back again. From there with a little research I saw mention of the 3 and 2 keys again, tried it on the 64 bit system and got it to boot in 32 bit.
Long story short though I don't know why I can't at least boot into 64 bit mode. Could it have something to do with the SSDs? Could it have something to do with SoftRaid? Why would both arrays dismount when only one should be affected?
Is it a common issue for many 64 bit compatible Macs to not be able to start up in 64 bit mode for any one of a variety of reasons? I should say that neither of my systems can start up that way.
Thanks, any insight is appreciated.

Talk to Mark and look for any notes on SoftRAID and 64-bit mode;
Try installing Mac OS only to one of your SSDs (break the array).
Just a nice small clean Apple ONLY OS.
"6" + "4" ought to get you into 64-bit kernal mode.
Any PCIe card/driver you have to be concerned with?
==================
SoftRAID 3.6.8 is compatible with Snow Leopard in 32 bit mode. You will be asked to replace the newer version of the SoftRAID driver that is bundled with Snow Leopard, with the 3.6.8 driver.
+A newer, *64 bit version of the SoftRAID driver* is included with Snow Leopard for users in 64 bit mode,+ which will allow you to keep existing volumes and access data from the 64 bit version of Snow Leopard. Currently, only the X-Serve boots into 64 bit mode by default. *SoftRAID 3.6.8 will not work in 64 bit mode.*
SoftRAID 4.0 is coming soon!
SoftRAID version 4 will be a full 64 bit Snow Leopard compatible version. We don't have a firm shipping date, but will try to have a "customer beta" in a few weeks for those who want to beta test SoftRAID 4.0.
The SoftRAID 4.0 official release will probably be in October. Upgrades will cost $69, except for 2009 purchasers, who will get it free.
http://www.softraid.com/

VPN Client on Windows 7 64 Bit Enterprise and T410 Very Slow to Load

Hello,
I have the 64 bit Client 5.0.0.7.0290 loaded on Thinkpad T410s running Windows 7 64 Bit Enterprise and it takes over an hour for the client to execute. Each step of the client load takes 10-15 minutes to load and although the interface eventually loads; it does not allow me to connect.
It happens on all the T410s which are all running Windows 7 64 Bit. Our other Windows 7 64-Bit Laptops and Desktops run this client just fine. I have tried to load the client as the first app after the Windows 7 has completed its install from the Microsoft DVD and I get the same response.
Any suggestions on how I can debug this issue? I have tried process explorer and it does not show any hung processes.
Many thanks,
Kevin

Hi all,
thanks for your suggestions.
Unfortunately both errors still remain.
1) Web Intelligence Rich Client
I have installed BOE client tools using XI3.1 SP3 Client tools package in C:\Business Objects. The report's import runs well, but when i try to open one of the imported reports, i receive the error: WIJ 2002.
The details are:
Version:null Analisi dello stack: java.lang.RuntimeException: java.lang.RuntimeException: XML parser problem: XMLJaxpParser.parse(): Element type "ABOUT_Patentnumbers" must be followed by either attribute specifications, ">" or "/>". at com.businessobjects.wp.xml.jaxp.XMLJaxpParser.parse(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source) at com.businessobjects.webi.richclient.XMLviaOccaRC.getServerConfiguration(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.xml.XMLServerConfiguration.load(Unknown Source) at com.businessobjects.wp.tc.TCMain.initClient(Unknown Source) at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknown Source) at java.lang.Thread.run(Unknown Source)
2) Infoview
We have installed java 1.6.0_02 (we previously have Update 29).
We try to use Explorer 9.0.3 or Firefox 8.0
Any other suggestion???
Thanks

Need to install Adobe Reader to a 64 bit folder and not (x86) default 32 bit folder

Hi
We have a program on our system which searches on local machines for their Adobe Reader in able to open up a pdf. Only one pc on our network is 64 bit and of course when installing Reader will default install to C:\Program Files (x86).
We need to be able to install AR to C:\Program Files to allow the databse to work on this 64 bit pc.
I have tried using the cmd feature and also adobe customisation wizard but to no avail.
Is there any way to change folder location on install?
Many thanks

The software is wrong? How do you mean? The software by default tells the users computers to use Adobe Reader to open up the created pdf files by this program. This program has been designed for a specialist purpose and cost thousands. Unfortunately the default location is under the 32 bit directory which is Program Files on all the 32 bit machines which is just fine. Now we need the 64 bit pc to be able to run this software but changing the default location of where to find adobe reader would mean the 32 bit pc's would not work. To add another location would mean the designer of the program charging another huge amount (approx £300).
All I am asking is there anyway installing AR can override the default location in a 64 bit pc and put adobe in C:\Program Files as if it were a 32 bit pc?
Many thanks for replies so far

I inadvertently downloaded the 64-bit version and need the 32-bit version of Lightroom 6 upgrade.

I inadvertently downloaded the 64-bit version and need the 32-bit version of Lightroom 6 upgrade.
i go to the download page and i dont see a 32 or 64 bit option.
Please help! Thank you,
Carlos

lr 6 is 64bit only, System requirements
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

In windows 8.1 64 bit , brightness and sleepmode not working

I have the 15-g009AX notebook via flipkart . After installation of windows 8.1 64 bit brightness and sleepmode and hybernate mode not working
Please send the solution.
From.,
Madhu

Hello @vmsbobj ,
Welcome to the HP Forums!
I understand after installing Windows 8.1 you are no longer able to use the brightness, hibernate or sleep mode options.
I cannot seem to find the exact model you've listed. The drivers found here should do the trick for you though: HP 15-g030au Notebook PC Drivers. What you're looking for is the HP System Event Utility software found in the Software - Solutions section.
If you can respond with the product number for the notebook I may be able to give a better answer. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Let me know if this utility resolves the issue.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

How to get 64-bit install and 32-bit client to work on 1 pc

I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support requires 32-bit client (for drivers) so I installed the 11g client also.
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
Sqlplus in 64-bit works fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
ORA-12560: TNS:protocol adapter error
If I open cmd prompt and navigate to 32-bit sqlplus under client this WILL work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?
Thanks in advance for any help!

lo**** wrote:
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client. The env/reg variables probably do exist/show, only in the right place. In Win 64-bit, there's a separate branch of reg entries for 32-bit (look for WoW6432Node).
>
... whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
ORA-12560: TNS:protocol adapter errorIt works as expected. Since there is no Oracle instance in the Client home (no surprise), you can't connect "locally" from the 32-bit sqlplus. I.e. you need to use "...@connectident" in the connect string.
In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 toOn Windows platform, ORACLE_HOME should not be set by user (it is already set by installer, in the Registry).
To pick up proper settings, PATH need to be set or used.
>
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?Please remove OH from env system settings.
Multiple homes on Windows is often a source of problems, since extra consideration and setup is needed more than just installing the software.
If "Cognos" relies on system PATH, then one way to go might be:
- put path to 32-bit Client bin folder first in PATH
- set up a shortcut to command window with only 64-bit in PATH, for times when you need to administer the database via command line.

I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?

I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?
Lance

download the installation file(s) and activate with your serial number,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.<

16 bit/32 bit comps and Illustrator?

Similar Messages

Maybe you are looking for