16 bit DPX  file error

Hi
we are using photoshop cs5, in windows XP after  working in  16bit dpx file and saved as 16bit dpx file.. but   while reopen that DPX file it shows black frame.
why i'm not able to see the image ? its shows black frame...
Can you please give any suggestions!
thanks
Panneer

hi...
I'm not using any plugins... and I ve just tried disabling OpenGL drawing .. still no luck..
i will explain about that Dpx file  history..
it was 32bit exr file converted to 16bit dpx file(nuke). in this 16bit dpx i'm doing some touch up work in photoshop. cs5 (xp).
Reading  16bit DPX file fine. but while write that file some thing is happening . its endup with black frame.
here i ve sample 16bit dpx file. one is 16bit dpx raw file other one is saved from cs5.(black frame)
these sample files will help u to figure out.. what went wrong ...!!!
http://www.4shared.com/file/ZZiXty85/Sample_16_bit_DPX_files.html
Thanks
apanner

Similar Messages

  • Reading 12-bit DPX files?

    I received an image sequence from a client. I go to import these DPX files into AE CS6/Mac and I get an error that AE can't read 12-bit DPX files. (I thought DPX only came in 8 and 10 bit flavors)
    Is there a 3rd party plug-in that can read 12-bit DPX?

    See this:
    http://fnordware.blogspot.com/2012/06/dpx-plus.html?m=1

  • Blender 10 bit DPX Files not importing into AE CC

    Hi all! Back in After Effects CS6 I was able to import DPX files generated from Blender. They were 10bit RGB files like this one:
    Dropbox - 0001.dpx
    I recently upgraded to AE CC (no plugins installed) and I am getting After Effects error: The file header version is invalid. ( 0 :: 8 )
    Please note the only change has been upgrading to CC. These files were generated in Blender 2.68 and worked fine in CS6, but not in CC.
    On Mac OSX 10.9.5 with a GTX 680 and 20 GB of RAM. Any help would be appreciated

    I looked at this file with DPX Plus in Photoshop and found that the header version is listed as "v2.0" instead of the standard "V2.0", note the uppercase. It's true, earlier versions of AE weren't bothered by this. I'll file a bug.
    In the meantime, you could use DPX Plus for AE to read it, because it'll ignore the version in the header.

  • Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.

    Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.  I have changed the permissions to everyone and it doesn't work

    Any suggestions please?

  • Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support is required.  Uninstalled and tried to install again several times.  Using Windows 7 64 bit on laptop.

    Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit.  Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support was not found.  Can anyone tell me why this is happening?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • "File Error: Unknown File" when rendering

    Hi,
    When attempting to render any clip I get a "File Error: Unknown File". Help?
    I'm using FCP 6.0.5 with video content from a Canon consumer HD camera.
    Thank you,
    Tim Moore

    switch the location of your render files and see if that helps. I had this happen week before last and it drove me crazy (crazier) I switched scratch disks and met deadline. Now it all behaves like it never happened. some bit stuck somewhere, that took the machine being off for a while to cure

  • When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of

    When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • "Unable to read file" error in Excel 2010 when downloading .xls file from IE11

    We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
    after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
    Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
    If the file is opened directly from /Temporary Internet Files then it opens just fine.
    Window 7 64-bit
    Thanks in advance!

    Hi,
    I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
    Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
    error message/code during you open XLS file from IE 11.
    Hope it's helpful.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Cant work with 32 bit image files?

    Hi there, I am unable to work with 32 bit image files on our cs6 ? I am fallowing a tutorial and a person creates a new file with 32 bit channel selected from dropdown menu, and starts painting on it he is using CS5. When I create a 32 bit file and select the brush tool, it comes on with circle and cross line and error comes up saying that the brush tool is not supported with 32 bit image files, in fact, I cant use any tools on the 32 bit images, I can't even create a new layer on the file. There is one thing I can do, which is a great feature, I can save it! But it's not much of a use now is it? If the image is plane white sheet. Is this a special feature that you need to purchase seperetly? Could you please advise. Regards

    Hello again,
    so resetting the preference file makes no difference to the problem.
    I checked 6 of our macs. 3 of the macs can create the 32 bit images and allow paint and other tools with no problem. Jet the other 3 macs have the same problem as I have. I checked my 2008 macbook which has CS5, and it can also edit 32 bit files. Checked my PC yesterdey which has CS6 installed, can't work with 32 bit image files.
    I find this very odd, some work and some don't. Any suggestions would be great. Please also find a screenshot of the mac with the issue.
    Kind regards,

  • File Error: Unkown File when attempting to capture

    I teach an intro to video production course and my students keep getting this error:
    File Error: Unkown File
    when trying to capture footage. It doesn't matter if they're using capture now or batch capture. This error message comes up and they can't capture. I've tried different machines and shutting down and restarting, but have had no success. They're using FCP 6 and most of the computers are dual processor G5s.
    Any thoughts? I've seen other discussions about this error, but none where it happens when trying to capture.
    Thanks.

    I suppose you chose easy setup DV PAL 48khz
    Audio to capture in FCP should always be 16bit 48khz.
    Are you saying that sound was recorded at 32khz (12 bit)?
    If so then there might be indeed problems with FCP.

  • Oracle 11G database for 64 bit windows installation error

    Hi,
    I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

    Adipur wrote:
    Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
    Re: Oracle 11G database for 64 bit windows installation error
    Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
    I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
    Edited by: EdStevens on May 15, 2013 7:03 AM

  • File Error importing .mov

    Here's the background... I'm trying to import a .mov file I've gotten from a friend's wedding DVD. Used Handbrake to convert the wedding DVD to the individual files. The handbrake output was a MPG4. FCP wouldn't import that. So, took the MPG4 to Quicktime and then exported that as a .mov. I get the message...
    "File error: 1 file(s) recognized, 0 access deinied, 1 unknown."
    What am I doing wrong. Just want to help him re-edit his wedding video.
    Thanks for the help.
    Dave
    G5 Desktop   Mac OS X (10.4.4)   FCP 5.0.4, 7.0.4 Quicktime

    it doesnt sound like you are doing anything wrong. can you open the file in quicktime (yes), then you should be able to open it in FCP. I have done the same thing numerous times. In quicktime take the mp4 and export a 'movie to quicktime movie'. settings, uncompressed (10 bit if you can) audio = best (the best settings for both). Make sure your project in final cut matches your qt output and import the footage.

  • IMAQ Read File error -1074396159

    Hi NI,
    I am getting "IMAQ Read File" error -1074396159 when trying to read a large image.  I get this error when trying to read a ~400MB image on a very clean (not many extraneous applications) Windows 7 computer with 4GB or RAM.  I tried this on two other not very clean Windows 7 computers with 4GB of RAM and 2GB of RAM respectively.  On the latter two computers I do not get this error.  I found this knowledgebase which explains one possible cause of this error.  Are there any other causes for this error?  Are there any workarounds?
    Thanks,
    Jonathan-LV

    That KB is incorrect, as the memory only needs to be virtually contiguous inside the process address space, not physically contiguous in RAM. This is not affected by how many programs are loaded (with the very slight exception that some read-only pages of DLLs can be shared cross-process in certain cases). This is really a function of how fragmented the memory space is in the process itself. The problem is that a normal 32-bit app on 32-bit Windows only has 2GB of virtual memory space. 500MB is 25% of the entire space. DLLs tend to get loaded scattered throughout the memory space for various reasons and other memory allocations that have different lifetimes cause fragmentation. The number of multi-hundred-MB chunks available is very small in a large app like LabVIEW.
    Some options to help:
    -Moving to a 64-bit OS (still using 32-bit LabVIEW) will change that 2GB address space to 4GB with no changes to your app
    -Moving to both a 64-bit OS plus 64-bit LabVIEW will change that 4GB address space to 8TB (virtually unlimited)
    Eric

  • Has anyone gotten a missing file error when installing 10.5 on windows 7

    I have tried to install iTunes 10.5 on my windows 7 64 bit laptop and keep getting a "missing file error" but it doesn't say what file is missing and I haven't been able to find any info to help resolve the issue. Any help would be appreciated!

    Ok, if you get this message I've read a bit further and found that you must uninstal everything that has something to do with apple. this includes the device driver. this link may help you with that. http://support.apple.com/kb/ht1925 Once I went through the list and deleted everything (device support is a *****). I installed it again and it came up with the same error. I then clicked ok and it rolled back but automatically started installing again and it worked. I know have itunes 10.5. but know my iphone 4 wont connect to it, lol. it says i have to reinstal because the driver didn't take or something. I really want the OS update for my phone but gd this is a bit much.

  • Bridge CC doesn't display dpx files

    We just upgraded from cs5 and there is a huge problem with bridge cc - it doesn't display previews for any dpx files.
    I already exported 10bit, 12bit and 16bit dpx files and none of them display!!!
    This pretty much makes Bridge useless for any postproduction facility.
    We have it installed on 5 separate machines.
    PS, AE and Premiere display the files without a problem.

    Here are three different dpx fotmats exported form AE CC - 10bit, 12bit and 16bit - none of them displays in Bridge, all open fine in any of the Adobe applications.
    Using OSX 10.8.4 and Bridge CC 6.0.1.6 (latest update for CC just appeared last week) and can view the 10 and 16 bit versions without problems in Bridge CC as thumbs and as previews but the the 12 bit version is only a document icon. Select purge cache for selection has no effect
    I also can open and view the 12 bit version in AE so the file itself should be OK but here it ends I'm afraid due to next to none experience with AE. Tried to export again but got lost in the wood of options and a save as command saves as an AE project which also can't be viewed in Bridge…

Maybe you are looking for