16 bit Tiff crop and straighten display issues

Still having the same old issues with 16 bit exports when crop and straighten have been applied to a file. Re import the n zoom or use loupe results in artifacts.
Anyone else??

I've had this problem with images saved as 8-bit scans.
Are you using any compression in the TIFs? I scanned using Nikon Scan 4, cleaned up a bit in Photoshop 7, reduced the bit depth to 8-bit, and saved at TIFs with embedded colour profile using ZIP compression, Macintosh byte order.
This used to work with Aperture 1.5.6, but with Aperture 2.0 I see a kind of offset pattern, so a vertical line looks like this:
If export the master TIF, open it in Photoshop (where it looks normal) and save it with no compression Aperture displays it properly.
(I'm still using Tiger, so I don't think this is an OS issue.)

Similar Messages

3.2 image rendering issues when cropping and straightening

Upgraded to 3.2 - all works well so far but have noticed that the top 1/3rd of image disappears during the cropping and straightening processes in the viewer window, but only with portrait/vertically oriented images. Anyone else have that issue?

Still on Snow Leopard here and I just tried this. Sorry to report it worked OK for me. I tried both straightening then cropping and then the reverse. No problems.
Does it happen on all portrait images? Could you post a screen shot of the results?
There wasa report of something similar a while back. Here's the thread:
After straightening/cropping 1/2 or 3/4 of displayed image is blacked out! Don;t know how that turned out.
regards

PSE 11 editor has stopped importing from scanner, no longer permits drag and drop, will not permit cropping, and other bizarre issues

Windows 8.1, PSE 11
I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos. Then some freezing. A little added crashing. A plethora of other bizarre issues as well. This just stated happening a couple of days ago.
What I have tried:
Uninstall/Install.
Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it.
Kindly advise. Thanks!
Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3500 MHz
Built-in memory: 8139 MB
Free memory: 5185 MB
Memory available to Photoshop Elements: 3255 MB
Memory used by Photoshop Elements: 70 %
Image tile size: 128K
Image cache levels: 6
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 660 Ti
Driver Version: 9.18.13.3750
Driver Date: 20140327000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 660 Ti
Video Card Memory: -2047 MB
Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
Temporary file path: C:\Users\evan\AppData\Local\Temp\
Photoshop Elements scratch has async I/O enabled
Scratch volume(s):
Startup, 931.2G, 805.4G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2011/03/29-16:11:44   63.457850   63.457850
   adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/20-18:39:56   4.1.9   78.509892
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2011/03/29-16:11:44   63.378681   63.378681
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2010/10/12-08:45:30   63.139439   63.139439
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
   adobe_caps.dll   Adobe CAPS   4,0,42,0
   Adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   AGM.dll   AGM 2011/03/29-16:11:44   63.457850   63.457850
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   1.486530
   aif_ogl.dll   AIF   3.0   1.486530
   amtlib.dll   AMTLib   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   amtservices.dll   AMTServices   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   ARE.dll   ARE 2011/03/29-16:11:44   63.457850   63.457850
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat   3.3   49.279053
   AXEDOMCore.dll   AXEDOMCore   3.3   49.279053
   AXSLE.dll   AXSLE   3.3   49.279053
   Bib.dll   BIB 2011/03/29-16:11:44   63.457850   63.457850
   BIBUtils.dll   BIBUtils 2011/03/29-16:11:44   63.457850   63.457850
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2011/03/29-16:11:44   63.457850   63.457850
   data_flow.dll   AIF   3.0   1.486530
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ems.dll   Elements Organizer   11.0
   ExtendScript.dll   ExtendScript 2010/03/05-08:21:15   61.423205   61.423205
   FaceDetector.dll   FaceDetector 0000/00/00-00:00:00   2.0.1.1   2.0.1.1
   FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
   filter_graph.dll   AIF   3.0   1.486530
   hydra_filters.dll   AIF   3.0   1.486530
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   image_compiler.dll   AIF   3.0   1.486530
   image_flow.dll   AIF   3.0   1.486530
   image_runtime.dll   AIF   3.0   1.486530
   JP2KLib.dll   JP2KLib 2011/03/29-16:11:44   63.196876   63.196876
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   MPS.dll   MPS 2011/05/24-09:45:42   63.464027   63.464027
   MSVCP100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCP71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   MSVCR100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCR71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop Elements Editor   11.0
   platform.DLL   Adobe Help System   1, 0, 0, 1
   Plugin.dll   Adobe Photoshop Elements Editor   11.0
   PSArt.dll   Adobe Photoshop Elements Editor   11.0
   PSViews.dll   Adobe Photoshop Elements Editor   11.0
   ScCore.dll   ScCore 2010/03/05-08:21:15   61.423205   61.423205
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   Tbb.dll   Intel(R) Threading Building Blocks for Windows   2, 2, 2009, 1011
   updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
Required plug-ins:
   Accented Edges 12.0
   ADM 3.11x01
   Angled Strokes 12.0
   Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
   Average 12.0.2
   Bas Relief 12.0
   BMP 12.0.2
   Camera Raw 7.4
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Clouds 12.0.2
   Color Halftone 12.0.2
   Color Variations 12.0.4 (12.0.4x001)
   Colored Pencil 12.0
   Comic NO VERSION
   CompuServe GIF 12.0.2
   Conté Crayon 12.0
   Correct Camera Distortion 12.0.2
   Craquelure 12.0
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   Difference Clouds 12.0.2
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Extrude 12.0.2
   FastCore Routines 12.0.4 (12.0.4x001)
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Grain 12.0
   Graphic Novel NO VERSION
   Graphic Pen 12.0
   Halftone Pattern 12.0
   Ink Outlines 12.0
   Lens Blur 12.0
   Lens Flare 12.0.2
   Lighting Effects 12.0.4 (12.0.4x001)
   Liquify 12.0.1
   Matlab Operation 12.0.4 (12.0.4x001)
   Mezzotint 12.0.2
   MMXCore Routines 12.0.4 (12.0.4x001)
   Mosaic Tiles 12.0
   Multiprocessor Support 12.0.4 (12.0.4x001)
   Neon Glow 12.0
   Note Paper 12.0
   Ocean Ripple 12.0
   OnEdge 1, 0, 0, 1
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Pen and Ink NO VERSION
   Photocopy 12.0
   Picture Package Filter 12.0.4 (12.0.4x001)
   Pinch 12.0.2
   Pixar 12.0.4 (12.0.4x001)
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Polar Coordinates 12.0.4 (12.0.4x001)
   Poster Edges 12.0
   Radial Blur 12.0.2
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.0.4
   Shear 12.0.2
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Solarize 12.0.2
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Straighten and Crop Image 12.0.4 (12.0.4x001)
   Straighten Image 12.0.4 (12.0.4x001)
   Sumi-e 12.0
   Texture Fill 12.0.4 (12.0.4x001)
   TextureSelect 12.0.4 (12.0.4x001)
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   Underpainting 12.0
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   WIA Support 12.0.4 (12.0.4x001)
   Wind 12.0.2
   ZigZag 12.0.2
Optional and third party plug-ins:
   Frame From Video 6.0
   Magic Extractor 12.0.4 (12.0.4x001)
   PhotomergeUI 12.0.4 (12.0.4x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices: NONE

Final Update: ...god willing...
OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
Wish me a lot of luck in the future.. I'm sure i'll need it!

The trial version of Adobe photoshop 13 does not have the Crop And Straighten Photos option under file and automate....... all it has is "Fit Image"....... would really like to have that feature.... is it something they eliminated?

I am scanning in many old photos and there are several photos on one page.... I read about a feature that was suppose to be available under adobe photo shop elements 13 that would allow multiple cropping under the file, automate, Crop And Straighten Photos....... the only thing that displays on the version 13 that I have is "Fit Image"...... which doesn't help me...... have they removed this tool or do you have to crop and save one image at a time? Thanks for your help?

You want Image>Divide Scanned Photos

Crop and straighten

Crop and straighten tool no longer work correctly in PSE 11, windows 7. Problem surfaced in the last week. Have done a complete reinstall and problem still exists. Appers to be an instability error.

Try Edit> Preferences> General> "Reset Preferences on Next Launch" and restart PSE.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Crop and Straighten Photos in CS6

I open a 8"x10" jpeg or any other photo then go over to FILE menu and drop down to AUTOMATE then over to CROP and STRAIGHTEN PHOTO,S
Now what happens is that three other copies appear copy ,copy 2 copy 3 .
My original is OK at 8"x10" followed by the copy being 5"X7" then copy2 is about 1/2"x2" and copy 3 is about 3/4"x3/4"
I think this is being caused by interaction with CS5 as the same happens there.
CS4 is all OK this not being affected.
Now in CS4 i can crop and straighten but in CS5 and CS6 nothing can be done.
Kip

OK, here's the scoop: the feature in File>automate>crop and straighten is designed for those who scan in several photos with white space between them. It will make it's best attempt at separating each photograph by looking for the white space around them. It will then crop each photo to the edges it determines and make each straight based on the detected edge.
It is not designed to straighten the image in a photo. If you run this on a photograph, it is looking really hard for white space and will make its best attempt to separate what it thinks are independent items or photos and save each to a file.
If you want to straighten an image, go to the ruler tool and draw a line and choose straighten layer to get a rotation only, or go to the crop tool and select straighten, and draw a line that you wish to be the horizontal. This one will crop also.
I hope that clears up the issue.
Pattie

Is there a way to adjust crop borders on Crop and Straighten?

I'm trying to use Photoshop CS3 to crop and straighten images of postage stamps. E.g., place a bunch of stamps on the scanner bed and scan them as one image. Then use Automate/Crop and Straighten Photos to create separate workspaces each with a single stamp image, cropped and rotated appropriately. This almost works; the problem is it often crops the stamps too closely, cutting off the perforations. The rotation is not always perfect either. For example, for the above image I get:
These two are pretty good except the perforation tips are trimmed off.
This one is a disaster
So I'm thinking if there were some way to specify how tightly the images are cropped, it might help solve the problem. Any other suggestions?

We now have a solution.
http://forums.adobe.com/thread/778507?tstart=0

10.5.3: Clamshell mode and 1080p display issues fixed?

Has the clamshell mode issue and 1080p display issue been fixed in 10.5.3? Are you able to shut your laptop and use 1080p on an external monitor without the **** thing freaking out?

Me and hundreds like had the issue when we upgraded to 10.5.2. It is a known but bug that when you start up the system an external display wouldn't be recognized in calibrated profiles (only at 1440x900). A work around was to start up then close the door immediately or boot up without external display connected and connect when completed booted.
I was told by support in Jan that there would be a fix in the next release (10.5.3 I presumed), but after installing it I have the same problem and the release notes don't mention it as repaired.

Crop And Straighten Photos - Changing parameters / Editing Script

Hi. I am currently using the Crop and Straighten Photos automation to crop scans of 10 to 12 maps that are scanned on a large flat bed scanner.
A lot of the plans have rough edges and aren't always completely square. Is it possible to allow a tolerance (eg. 5mm, or 20pixels etc) before cropping each image? I've tried editing a .jsx script that was submitted on this forum (the script was designed to crop more border from the image, as opposed to leaving more image) but this simply added a black border around my image as it enlarged the canvas side once the image had already been cropped.
Instead, I need the selection area to be increased prior to cropping.
Does anyone have an idea on whether I can get a script to do what I am looking for?
Furthermore, if two or more of the maps are joined at all by a hair or a frayed string of canvas from the map's backing then the Crop and Straighten Photos automation considers it to be one map and crops it as only one image. Is there a way of increasing this tolerance to make the cropping process more brutal so to speak?
Any help would be greatly appreciated.

Hi Christoph.
I'd realised that once i made the post, and yes, the duplicate and flatten parts in the process are unnecessary, they have been removed. The action is set up now so that once it crops the individual images, it closes the main image down, and then saves and closes the individual images. It is setup to save and close 12 images (as this is the most there will ever be in my case), and I set the action to post errors to a log rather than halt, so if there are less than 12 files it will continue and just post an error in the file. It works really well now thanks!!
I then run an action that options each individual file and brings up the "save as" dialog. This is a chance to perform a QA on the image and to save it as the correct name on the plan.
However, the action is currently setup so that it creates a complete new image each time and closes the original. This is the only way I can make the "Save as" dialog point to the new destination as if I simply open and "save as" the original files, the default folder always resets back to the original folder where the cropped images are. I'll have to investigate other methods of opening and renaming the images to help speed this part of the process up.
Thanks so much for your effecient responses. They have been a great help!
Cheers.

Photoshop CS6: Auto Crop and Straighten work wrong (EDIT)

Hello together,
I use the Creative Cloud for Students (German) and have make for some days an update of my programs like Photoshop CS6.
Since today the option of automatic crop and straighten makes some big problems.
Edit:
I make following Steps:
1.) Duplicate the level and make the first level invisible.
2.) I use the crop tool to mark the details which I want to have free.
3.) Click on the mask symbole in the level section
4.) At the end I click "auto crop and straighten"
It makes 39 little pics out of one. This isn't what I want to do and it is since the last update.
--> Edit end.
I hope someone understand my problem and can help.
Greetz
Markus from Germany

Since your question asks "Could we ..." I would like to state that "we" cannot do such a thing. "We" here in this forum are Lightroom users, and not Adobe employees. If you'd like to make a request for a specific new feature in Lightroom, there is a link right here on the front page of this forum to the proper place to make feature requests.

Crop and Straighten not separating photos but is producing a single image file.

I have been trying to use crop and straighten on multiple scanned images and am getting very disappointing results. Instead of separating each of the images with white space around them into individual files, I am getting back a single image of the entire scanned area. Is there a setting I am missing? When I was using CS3 it was no problem, it would have its occasional glitches, but nothing major. CS6 isn't even trying to separate the images.

Could you please post one of the images (or a lores version of it) that produce unsatisfactory results?

Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool

In both Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool with horizontal images. Im running Lightroom on a Quad-Core Intel Xeon Mac with 32 GB of memory with OS 10.8.4, this problem has gotten worse and worse to the point where the crop tool is unusable. Please help!

Alright,
no replies so far! Anyways, here's some more information which is leading me to the conclusion that the bug causing the effect described above is a combination of Apple's SMB implementation of Mavericks and the way Lightroom is actually using SMB network access:
I did another trial by connecting a USB hard drive to the USB port of my router (Netgear). The connection is quite slow, but moving one of the folders in question (see my 1st post above) to the shared drive connected to the Router made Lightroom on my Windows machine to see the photos again, when I told Lightroom where to find the moved folder!
Everything was working as expected, on the Windows machine again! Moving the folder back again to the Mac Mini fileshare was causing Lightroom on the PC to get blind again for the pictures trying to sync or import. However, accessing and modifying a photo was possible again, like it was before the trial. So it's only the sync and import function having a problem!
I also did some trial in re-building ACLs and access rights on the file server with no luck. So there's got to be a functionality in sync and import of Lightroom which is using a certain SMB feature which is not supported by Apple's SMB implementation!
Any thoughts or hints?
Thanks!

CS6 crop and straighten causes error message - "An error has occurred"

Running CS6 on a windows 7 desktop machine. When I try to crop and straighten a 4 image scanned image I get "An error has occurred" I do not get this error on my laptop. I have uninstalled and re-installed CS6 with no change in error message. I have reset the preferences and still the same error. Any suggestions?

Starting Photoshop without plug-ins solved the problem. Is there a way to
find out which plug-in is the problem? Copy them to another folder and add
them one at a time back into the plug-in folder until the problem re-occurs?
Bob
On Sun, Feb 22, 2015 at 6:17 PM, Benjamin Root Photography <

Crop and Straighten Images Settings

I'm trying to use Photoshop CS5 to crop and straighten images of postage stamps. E.g., place a bunch of stamps on the scanner bed and scan them as one image. Then use Automate/Crop and Straighten Photos to create separate workspaces each with a single stamp image, cropped and rotated appropriately. This almost works; the problem is it often crops the stamps too closely, cutting off the perforations.
Here are a few once cropped.
So is there a way to set the border? Thanks in advance.

Using paths and the stroke paths function, like in this video, should get you
decent results with the crop and straighten function.
Look down the page under CS2 and Crop and Straighten updated:
http://www.russellbrown.com/tips_tech.html
This:
To this:
MTSTUNER

Scripting and Crop and Straighten photos

photoshop CS3 has this neat feature "Crop and Straighten photos" which is very helpful in cleaning up scanned images (remove the black border) but is there a way to turn it into an action ?
i would like to apply this against many images (lots of files) in an automated way but being new to scripts/actions, I haven't had much success since this command creates a copy of the original.
is there an action that will help me batch remove the black border from all my images either using this CS3 command or another. thanks

OK, I'm giving back: here's an adaptation of Paul's script that uses recursion to iterate through all subdirectories. (Note that I also changed the file name suffix to a "static" (non-sequenced) value, as well as the name of the output folder, since I am using this to process single-photo image files. The original lines are commented out.) To implement the recursion, I defined the "main" functionality in a function ("ProcessFiles") that calls itself when encountering a subfolder.
Here's the full script. Hope this helps someone!
===========================
// Prompts the user for a directory, and then recursively processes each image
// in that directory and all subdirectories by executing the "Crop and
// Straighten" command. Images are saved with a specified suffix in a
// designated subfolder.
// Adapted from a script provided by "Paul R." in the "Photoshop Scripting" forum
// http://www.adobeforums.com/webx?7@@.59b54905/2
// TIP: Hold down the "Alt" key while running this script to instruct Photoshop
// to treat the image as a single photo. (For more information, see:
// http://livedocs.adobe.com/en_US/Photoshop/10.0/help.html?content=WSfd1234e1c4b69f30ea53e4 1001031ab64-762e.html)
#target Photoshop
app.bringToFront;
var inputFolder = Folder.selectDialog("Please select folder to process");
if(inputFolder != null){
ProcessFiles(inputFolder);
function ProcessFiles(inFolder) {
// var fileList = inFolder.getFiles(/\.(jpg|tif||psd|)$/i);
var fileList = inFolder.getFiles();
var outfolder = new Folder(decodeURI(inFolder) + "/Cropped");
if (outfolder.exists == false) outfolder.create();
for(var a = 0 ;a < fileList.length; a++){
if(fileList[a] instanceof File && fileList[a].name.match(/\.(jpg|tif||psd|)$/i)){
var doc= open(fileList[a]);
doc.flatten();
var docname = fileList[a].name.slice(0,-4);
CropStraighten();
doc.close(SaveOptions.DONOTSAVECHANGES);
var count = 1;
while(app.documents.length){
// var saveFile = new File(decodeURI(outfolder) + "/" + docname +"#"+ zeroPad(count,3) + ".tif");
var saveFile = new File(decodeURI(outfolder) + "/" + docname + "-CR"+ ".tif");
SaveTIFF(saveFile);
activeDocument.close(SaveOptions.DONOTSAVECHANGES) ;
count++;
else if (fileList[a] instanceof Folder) {
// alert("Folder: " + fileList[a]);
ProcessFiles(fileList[a])
else {
// inappropriate file type, or null
function CropStraighten() {
function cTID(s) { return app.charIDToTypeID(s); };
function sTID(s) { return app.stringIDToTypeID(s); };
executeAction( sTID('CropPhotosAuto0001'), undefined, DialogModes.NO );
function SaveTIFF(saveFile){
tiffSaveOptions = new TiffSaveOptions();
tiffSaveOptions.embedColorProfile = true;
tiffSaveOptions.alphaChannels = true;
tiffSaveOptions.imageCompression = TIFFEncoding.TIFFLZW;
activeDocument.saveAs(saveFile, tiffSaveOptions, false, Extension.LOWERCASE);
function zeroPad(n, s) {
n = n.toString();
while (n.length < s) n = '0' + n;
return n;

16 bit Tiff crop and straighten display issues

Similar Messages

Maybe you are looking for