16: The transport tool terminated due to an internal error(transport req)

Hi friends,
i created one transport request for transporting custom appset to quality system.
while importing in quality i'm getting request in red color. checked log:
Unexpected EOF after 88079651 bytes
Ended with return code: ===> 16 <===
16: The transport tool terminated due to an internal error.
we intially transported Non BPC cubes, along with that infoarea name(/cpmb/bpc) came. But i'm able to see several /cpmb/xx infoobjects. I manually moved from infoarea(/CPMB/BPC) to other infoarea(ybpc) with new request in quality. next i'm trying to delete /cpmb/xx infoobejcts through one program(around 700 infoobjects are exists). can i use ujt_content_activate program to delete contents of appset, if i use that program what i have to mention in content version field? can anyone eloborate usage of ujs_activate_content? we are on bpc75nw sp04
any suggestions pls to import request correctly.
thanks,

continution to above question. sequence of things happend in our side.
Few BW cubes(not bpc), which are getting data from bpc applications(bpc cubes) via APD are transported. Imported to quality succesfully.
Next transferred around 5 BADIs(classes & enhancement implementations) to quality system, which were written for moving data among bpc applications as well for few calculations in plng applications. Succefully imported into quality system and checked respecive BADIs.
Next trying to transport custom appset. while importing facing above problem. Followed SAP how-to guides/methods.
any suggestions pls.

Similar Messages

Error 244: The DataFinder cannot start due to an internal error.

I have LabVIEW 2010 and, during Windows start-up, this error message pops up:
"The DataFinder cannot start due to an internal error.
(244): Please wait till the National Instruments PSP Service is running and try starting the DataFinder again or reboot your computer."
I have had this error message pop up for the past year so it is a recurring thing. It started showing up a few months after I had installed the LabVIEW program onto my computer, so I am not sure on what caused this message to consistently pop up. I find that it also causes a delay in the starting up of my computer--my other start-up applications will begin to show only when I close the error window. Please help! Thank you.
Solved!
Go to Solution.

Hi xcontradictorx,
It sounds like the National Instruments PSP Server Locator might not be started. Could you go to Control Panel >> Administrator Tools >> Services and locate the National Instruments PSP Server Locator? Double-click on it and make sure that the service is started. If it is, stop it and start it again (just by hitting the stop and start buttons). If it is not, start it, then go to the Recovery Tab and choose Restart the Service as the action for First, Second, and Subsequent failures.
If after change the settings for the PSP service the issue continues I would think that for some reason the PSP service is just being started late for some reason. Could you do a test real quick: disable the DataFinder in msconfig, reboot, then run the DataFinder.exe from C:\Program Files\National Instruments\Shared\DataFinderDesktop\bin. This should place the MyDataFinder app in your system tray (it looks like a yellow gear).
If this is successful, then we will need to change the order of startup services such that the DataFinder just starts after the PSP service.
Try the following:
1) Locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
2) Delete the DataFinder entry
3) Add a shortcut of DataFinder.exe to C:\Documents and Settings\All Users\Start Menu\Programs\Startup
4) Reboot
This should do all the standard Windows Startup (like starting services, etc.) and then launch the DataFinder.
One question: do you use the DataFinder at all? Either with DIAdem or the Data Finder toolkit? If not, you could try removing it from the Startup items. Just go to Start >> Run... and type "msconfig". Choose the Startup tab, locate DataFinder, and deselect it. Click apply. This will probably get rid of the error message.
Patrick H | National Instruments | Software Engineer

Error: The DataFinder cannot start due to an internal error

Hello,
I get the same error message every time I reboot my Win 7 PC:
"National Instruments DataFinder"
"The DataFinder cannot start due to an internal error."
"Please wait till the National Instruments DataFinder Index Service is running and try starting the DataFinder again, or reboot your computer. "
I tried finding a DataFinder Index Service in the Control Panel --> Admin,istrative Tools --> Services, as mentioned in this post http://forums.ni.com/t5/LabVIEW/Error-244-The-DataFinder-cannot-start-due-to-an-internal-error/td-p/...,
but there was none such listed service:
I cannot find any mention of a DataFinder or a DataFinder Index Service anywhere else on my PC. Can you please help to find out where this error is coming from and how to fix it? As far as I am aware, I do not use this DataFinder. Thanks!
Regards,
Brandon

Hello BrandonVonk,
The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
Hope this helps,
Siana A.
Application Engineering
National Instruments

Workflow Manager 1.0 (SharePoint 2013): The process was terminated due to an unhandled exception

I am seeing large numbers of the following errors appearing in the event log of the SharePoint 2013 application server hosting Workflow Manager 1.0:
Log Name: Application
Source: Application Error
Date: [Date/Time]
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: [Application Server]
Description:
Faulting application name: Microsoft.Workflow.ServiceHost.exe, version: 1.0.20922.0, time stamp: 0x505e1b24
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c Faulting process id: 0x691c Faulting application start time: 0x01cfc2776b3f0d74
Faulting application path: C:\Program Files\Workflow Manager\1.0\Workflow\Artifacts\Microsoft.Workflow.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: b8157bf8-2e6a-11e4-9413-00155d38891d Faulting package full name:
Faulting package-relative application ID: Event Xml:
Log Name: Application
Source: .NET Runtime
Date: [date/time]
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: [same application server]
Description:
Application: Microsoft.Workflow.ServiceHost.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception
Info: Microsoft.Workflow.Common.FatalException Stack: at Microsoft.Workflow.Common.Fx+<>c__DisplayClass2.<failfast>b__0() at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object,
Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
Event Xml:
Log Name: System
Source: Service Control Manager
Date: [date/time]
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: [Same application server]
Description:
The Workflow Manager Backend service terminated unexpectedly. It has done this 895 time(s). The following corrective action will be taken in 30000 milliseconds: Restart the service.
Event Xml:
The SharePoint 2013 farm is updated through the September 2014 PU (KB2995902). Topology: 1 App, 2 WFEs. Workflow Manager 1.0 installed to the App server. Workflow Manager 1.0 cumulative updates one
and two have not been installed. The Service Bus Gateway and Service Bus Message Broker services are started. The Workflow Manager Backend service can be started, but then quickly stops.
Thoughts? Resolution? I would be grateful for any assistance.

Hi Stephan,
As I understand, you are encountering the issue that Workflow Manager Backend service terminating each time. May I know did you run the update cmdlets after you installed the updates for SharePoint server 2013? Please confirm it per the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
If you haven’t run the updates cmdlets, I suspect this is an install issue. I’d suggest you re-install workflow manager to resolve the issue:
1) Leave WFM/SB Farm
2) Uninstall updates and application in the following order and one at a time:
Service Bus CU1
Workflow Manager CU1
Service Bus 1.0
Workflow Manager 1.0
Workflow Manager Client 1.0
Microsoft Windows Fabric
3) Log into SQL server and delete Service Bus and Workflow Manager databases.
SBManagementDB
SBGatewayDB
SBMessageContainer01
WFManagementDB
WFInstanceManagementDB
WFResourceManagementDB
4) Install in the following order one at a time through Web Platforms Installer:
Workflow Manager 1.0
Service Bus 1.0 CU1
Workflow Manager 1.0 CU1
Regards,
Rebecca Tu
TechNet Community Support

Crystal Reports PrintToPrinter - The process was terminated due to an unhandled exception

Hi,
I am having a real problem with Crystal Reports in an application built using Visual Studio 2013.
Sometimes (in fact nearly all the time, but not always) whenever I call PrintToPrinter, I get the following error:-
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 37A9D5DC
I have two projects that wrap the functionality, one a Windows Service and the other a Console application.
I will attach a sample of my code, but at the moment I am testing using the console application for testing and this error always terminates the application completely. I have added all sorts of exception handling to try and stop it terminating the app, but to deal with the exception gracefully. Nothing however works, it always terminates the application completely.
The strange thing is that this only happens when calling PrintToPrinter. If I use export functionality such as ExportToStream, everything is absolutely fine and I don't get any errors.
The application always works fine on my development machine as well printing to an Epson WF-3540, it just falls over when deployed to the live server.
The application is developed in Visual Studio 2013.
It uses .NET Framework 4.5.1.
The printer that we are printing to that causes the issue is an HP LaserJet P3010 Series PCL 6
All Crystal Reports For Visual Studio are patched to the latest versions on the live server (13.0.5.891)
I am at a complete loss and any help or guidance would be very much appreciated.
A sample of my code is attached
Many thanks in advance.
Simon

VS 2013 is not supported until SP 9 due out end of this month
Don

Logon failure due to an internal error-webi client tool

Hi experts,
I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
there is a way to solve this problem?
regards,
Jonathan.

In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
For the updated reference table of the versions / builds and corresponding patch levels, please see KB article # 1602088
BI 4.0 RTM
14.0.0.760
Patch 04
14.0.0.904
Patch 05
14.0.0.918
Patch 06
14.0.0.940
Patch 07
14.0.0.954
Patch 08
14.0.0.970
Patch 09
14.0.0.986
Patch 10
14.0.0.996
Support Pack 1
14.0.1.287
Patch 1.1
14.0.1.313
Patch 1.2
14.0.1.330
Patch 1.3
14.0.1.342
Patch 1.4
14.0.1.360
Patch 1.5
14.0.1.375
Patch 1.6
14.0.1.397
Support Pack 2
14.0.2.364
Patch 2.1
14.0.2.388
Patch 2.2
14.0.2.397
Patch 2.3
14.0.2.416
Patch 2.4
14.0.2.439
Patch 2.5
14.0.2.455
Patch 2.6
14.0.2.481
Patch 2.7
14.0.2.508
Patch 2.8
14.0.2.532
Patch 2.9
14.0.2.556
Patch 2.10
14.0.2.565
Patch 2.11
14.0.2.594
Patch 2.12
14.0.2.619
Patch 2.13
14.0.2.641
Patch 2.14
14.0.2.657
Patch 2.15
14.0.2.682
Patch 2.16
14.0.2.703
Feature Pack 3
14.0.3.613
Patch 3.1
14.0.3.630
Patch 3.2
14.0.3.657
Patch 3.3
14.0.3.678
Patch 3.4
14.0.3.691
Please note that at today FP03 is in RampUp

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).

Windows 7 users in my domain are unable to configure or change backup settings. Users are able to open Control Panel > Backup and Restore, but when they click
Change settings, they receive the error: Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).
The same error is received when executing sdclt.exe /configure at the command prompt, regardless of whether the command prompt is launched using "run as administrator".
I've done significant testing, and have been able to determine that the local administrator account is able to configure backups before the computer is joined to the domain. Once the computer is joined to the domain, the local administrator account
and domain users who are in the local administrators group are no longer able to configure backup and restore. Domain administrators are able to configure backups.
This is a new issue, which began occuring sometime in the last 2 months. 3 months ago, users were able to configure backups without issue, and those computers with backups configured are still able to run their backups and do restores; however the
settings can no longer be changed.
Clearly something in the domain is doing this, but Group Policy has not been altered, and I can find no setting that would be doing this in any case. Any help is appreciated.

Hi,
So you mean you have tried different accounts in the local Administrator group and all of them failed?
If so, please check what group the local Administrator group belongs to? Does it belong to a group with limited privileges, such as the Guests group?
Tim Quan

DPM failing SQL backups due to error: "the SQL Server instance refused a connection to the protection agent. (ID 30172 Details: Internal error code: 0x80990F85)

I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O.  I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name:      Application
Source:        MSDPM
Date:          6/13/2011 1:09:12 AM
Event ID:      4223
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSDPM" />
    <EventID Qualifiers="0">4223</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
    <EventRecordID>68785</EventRecordID>
    <Channel>Application</Channel>
    <Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
    <Security />
</System>
<EventData>
    <Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
    <Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!

Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress.

Getting error The user could not be registered at this time due to an internal error in R11

We created new Organization (that had alpha numeric value e.g. 7777A) using Customer Online to be used in iStore i11 version.
The user account and password was also created for the organization. When we tried to login to istore the first time the registration screen (jtftmplh.jsp) was displayed. After filling the needed information and submitting we get the error:
"The user could not be registered at this time due to an internal error Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error."
But if we created new Organization with numbers only e.g. 7777 we don't have the issue. Yet we already have large number of organization with alpha numeric and they work fine. (believe they were pragmatically loaded).
The profiles "HZ: Generate Party Number" and "HZ: Generate Party Site Number" are set to Yes.
==> Here is the error in the page source:
Message: The user could not be registered at this time due to an internal error
Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error.
Stack:
oracle.apps.jtf.base.resources.FrameworkException: The user could not be registered at this time due to an internal error
Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error.
    at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:406)
    at _oa__html._jtftmplh._jspService(_jtftmplh.java:3961)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
    at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
    at _oa__html._jtftmplh._jspService(_jtftmplh.java:3870)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
    at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
    at _oa__html._jtftmplh._jspService(_jtftmplh.java:2342)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
    at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
    at _oa__html._ibeCRgpBusinessCreate._jspService(_ibeCRgpBusinessCreate.java:1467)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
    at org.apache.jserv.JServConnection.run(JServConnection.java:294)
    at java.lang.Thread.run(Thread.java:680)
Caused by: oracle.apps.jtf.base.resources.FrameworkException: IBE_ERR_UM_REG_USER
    at oracle.apps.ibe.um.RegisterBusiness.handle(RegisterBusiness.java:1157)
    at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:379)
    ... 37 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException
    at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
    at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
    ... 39 more
The error message is not helpful and not clear of the error. How can we register users with alpha-numeric value (if that is the issue?).
Thanks for your assistance.

Been like this for a couple of days. Is this something that happens from time to time?

The messages program will not open due to an internal error

The Messages application will not open due to an internal error? I have reinstalled the OS and still have the same problem. Although the messages notifcation still works.

Look at the discussion here.

An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are try

hi i am getting this error.
An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are trying to view does not have the required property 'SI_FILES'. Please contact your system administrator
please do the nedful.

yeah Ted Ueda,
what you are saying is correct. i am getting this output for
report.getProgID() is CrystalEnterprise.Report.
can you elaborate this. i am new to this. and also please let me know how to start and if u have any materials on this please forward to [email protected] and [email protected]
please let me know which is best book for beginers.
Thanks & Regards,
Purushotham Podaralla

I am trying to update CS 6Illustrator using the updater tool but I continually get an error saying,

I am trying to update CS 6Illustrator using the updater tool but I continually get an error saying, "Updates could not be applied." How can this be?
Here is my log file:
Adobe Illustrator CS6 Update (version 16.2.1)
Installation failed. Error Code: U44M1P7

if you're using a mac: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

The operation cannot complete due to an unknown error.

I get an error "The operation cannot complete due to an unknown error" when I copy paste ax XL graph from MS excel to Illustrator CS6. This happens only when I paste the graph created in Win7 but when I paste the graph created in XP, it doesn't throw any error and works fine. Can anybody say why get this error only with the graph sheets created in Win7 and what is the solution for this?

Moha,
Is that some thing to do with this.
That sounds highly probable.
Is it possible to downsave the file to .xls and try that?
It may be one for our staff friends here.

The workflow failed to start due to an internal error

My approval workflow never work in my machine before. It was a newly installed machine. when i start the Approval workflow, it stated "The workflow failed to start due to an internal error'. What other circumtances might lead to this problems?or you can email me @ [email protected]

hi
Finally it worked for me after reinstalling the features on the site collection. deactivating and reactivating didnt help. once i uninstalled and re installed them it worked.
Here are the steps i performed.
OffWFCommon
stsadm -o deactivatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
stsadm -o uninstallfeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -force
ExpirationWorkflow
stsadm -o deactivatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
stsadm -o uninstallfeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -force
ReviewWorkflows
stsadm -o deactivatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
stsadm -o uninstallfeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -force
SignaturesWorkflow
stsadm -o deactivatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
stsadm -o uninstallfeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -force
translationWorkflow
stsadm -o deactivatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force
stsadm -o uninstallfeature -id C6561405-EA03-40A9-A57F-F25472942A22 -force
install & activate
OffWFCommon
stsadm -o installfeature -name offwfcommon -force
stsadm -o activatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
ExpirationWorkflow
stsadm -o installfeature -name Expirationworkflow -force
stsadm -o activatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
ReviewWorkflows
stsadm -o installfeature -name ReviewWorkflows -force
stsadm -o activatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
SignaturesWorkflow
stsadm -o installfeature -name SignaturesWorkflow -force
stsadm -o activatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
TranslationWorkflow
stsadm -o installfeature -name Translationworkflow -force
stsadm -o activatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force

16: The transport tool terminated due to an internal error(transport req)

Similar Messages

Maybe you are looking for