160 GB Ipod needs constant resetting in car.

Hey hopefully someone can help me with this. I have a 160 GB ipod and i play it in the car all the time. Everytime I plug it in, the ipod goes to some sort of car play mode and just starts playing the songs in order and i cant skip or even pause it. If i reset the ipod with it plugged into the car, this stops and plays normally. Anyone know how to get it to stop doing this? Its pretty annoying. Thanks in advance.

<bump>
Anyone have a similar problem or know how to fix it?

Similar Messages

  • 160 GB Ipod needs resetting in car

    Hey hopefully someone can help me with this. I have a 160 GB ipod and i play it in the car all the time. Everytime I plug it in, the ipod just starts playing the songs in order and i cant skip or even pause it. If i reset the ipod, this stops and plays normally. Anyone know how to get it to stop doing this? Its pretty annoying. Thanks in advance.

    <bump>
    Anyone have a similar problem or know how to fix it?

  • AirPort Express needs constant resetting?

    I think my AirPort Express is on its last legs. Today a friend of mine came over with his Windows laptop (don't ask). Before we tried anything, I used the AirPort Admin Utility to add his MAC address to my access list and uploaded it to the AX. My AirPort Express network did not appear in his whatever-it-was Windows network utility. So, I used the AirPort Admin Utility to take my WPA2 Personal password off (the name of the network is open, so it still should have appeared in his list). Then the AirPort Express stopped passing the Internet to my MacBook and iMac. I was unable to get even the AirPort Admin Utility to see my AirPort Express after that, but the network was still available in the AirPort menubar.
    I tried un-powering the AirPort Express and plugging it back in. That didn't help. I ended up plugging the DSL modem directly into the iMac and getting back on the Internet (as I am now with Internet sharing and the iMac's AirPort card) so I'm certain that my Internet access is fine and the DSL modem is fine. I ended up doing a soft reset, and hard reset but neither would bring the AirPort Express back to life. I did a factory reset and then I could use the AirPort Admin Utility to put my settings back in, one part at a time. But the AirPort Express won't pass along the Internet with my WPA2 Personal password enabled. And after a second or third update/upload of settings the AirPort Express becomes completely inaccessible without yet another factory reset.
    I got the AX the day they were announced, so it's been humming along for more than two years now. I do have an AppleCare Protection Plan for my Mac mini, so I think the AirPort Express is covered with that. But, if there's anything else I can try before calling Apple, I'd like to give it a whirl.
    -Doug

    Even after a week of messing with it on my own, calling AppleCare Support got it back up and running. We didn't do anything that I hadn't already tried on my own, so I'm not sure exactly what it was that "fixed" it. But, the AirPort Express is now back up and supplying the Internet to my three Macs with all the original settings again.
    -Doug

  • BEFW11S4 v. 4 needs constant resetting for connection

    I have two linksys products -- a BEFCMU10 v2 modem and a BEFW11S4 v4 router.  Between two households, I have given MAC ID access to five machines (4 laptops, 1 iTouch).  
    It seems as though the computers (especially our neighbors') have connectivity problems unless I turn the power off and on -- sometimes once a day, sometimes more.  Sometimes that works right away (like this morning), but not always.   Usually I just flip the power strip, but in hopes of figuring out what is the culprit, I just unplugged and plugged the router today.  That connected my laptop immediately.  
    What's the deal?  The neighbors don't have access to this manual switch-flipping reset, so they're getting restless.  I have no hardware expertise, so I'm at a loss...
    Thanks! 
    Message Edited by sresari on 10-25-2008 09:52 AM

    Try to Change the wireless settings on router :
    Open the setup page of the router using 192.168.1.1 by putting the password as admin with username as blank & under the wireless section change the channel.
    And also you can try to upgrade the firmware of router by logging on to www.linksys.com/downloads

  • Phone needs constant resetting

    I have a iPhone 5S and everymorning I am unable to receive or send texts and unable to make or receive phone calls.  I have to tuern the phone off and then back on and it works fine until the next day.

    Been there, Apple has a trouble shooting for this kind of problem. 3.1 worked for me.
    here's the link:
    https://support.apple.com/kb/TS3406

  • HT4623 I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it on my phone when I unplug but not anything thru the stero except static. Help!

    I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!

    Hi Novagurl2369!
    I have an article for you that can provide some helpful troubleshooting steps to address your issue:
    No sound through stereo headset1
    Inspect the headset jack for debris and clean if necessary.
    Connect the headset and make sure the connector is pushed in all the way.
    Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
    If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
    Try a different song or video.
    Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
    Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • 30GB IPOD needed to be reset to factory settings...HELP

    my 2 yr old 30 GB ipod needed to be reset to factory settings as it was not being recognized by my computer or itunes. It stated the the ipod was corrupt. Apple support in Burlington suggested to reset to factory settings as othe measures didn't work. I now have new computer and need to know if I have to reload the itunes CD or just login to Itunes store.

    You need to download the latest version of iTunes from Apple (the "itunes store" is not involved).
    http://www.apple.com/itunes/
    The disc that came with the iPod will have an older version of the software, so download the latest. Install iTunes. Put all of your music and other media into the iTunes library. Connect the iPod. It should be recognized by iTunes. Depending on the current settings on the iPod, it may or may not ask if you want to sync the iPod to the iTunes library. If you sync, the music in your iTunes library will be copied to the iPod, and replace whatever music is already on the iPod.
    If you want to Restore the iPod to erase it and and initialize the software, select the iPod in the iTunes sidebar and click on the Restore button. This will install the latest available software for the iPod (technically not "factory settings"). After the Restore process completes and the iPod restarts, iTunes will again ask if you want to sync the iPod to your library or not (do it manually).

  • TS4268 I have an iphone on my account & added my daughter's ipod touch 5th generation to it. Now all my iphone info is on her ipod, even my phone number! How do I separate the two? Do I need to reset her ipod?

    I have an iphone 4s on my itunes account & added my daughter's new ipod touch 5th generation. Now everything from my iphone is on her ipod & still on my phone too, even my phone # shows up as her ipod. How do I separate the 2 devices? Do I need to reset her ipod? If so when I plug it into the computer won't it happen again?

    Don't select his apps to sync.
    Your iphone will only sync what you select

  • I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?

    I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?

    It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.

  • I have an ipod either 1st or 2nd generation,very old but my problem is that i forgot the password and i need to reset it. The problem is i cant reset it because my sleep button doesnt work

    I need to reset my ipod but i cant do that because my sleep button doesnt work any more and plus i dont remember my password.HELP

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella

  • Is there a way to resort an ipod touch to the point before a restore was done on it? It is telling me there is nothing in the icloud and I need to reset it back up.

    s there a way to resort an ipod touch to the point before a restore was done on it? It is telling me there is nothing in the icloud and I need to reset it back up. The reset was done before I could backup the icloud and itunes to the computer and it wasn't done with my permission.

    You may be able to get some info off the restored iPod by:
    via How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    iPod recovery software to restore lost music files      
    http://www.pcrecoverytools.com/ipod-data-recovery.html
    You can redownload most iTunes purchases by:        
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • I needed to reset my iPod touch because my pass code was changed and I didn't know what it was, but now iTunes wont let me restore it what do I do?

    Please help me!! I needed to reset my iPod touch because my pass code was changed and I didn't know what it was, but now iTunes wont let me restore it what do I do?

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • WRT54G Ver 6 Constant Need To Reset!

    I purchased a WRT54G Ver 6.0 Router in April to bring to Iraq with me.  I have it connected to my iDirect 3000 Satellite Modem, with the static IP config input into the WRT54G.
    I have two computers on my desk, my personnal XPS 1710 with Vista and my Work D600 Latitude with XP.  Both computers exhibit the same problems at the same time.  I have even had other computers connected and have had the same problem.
    My problem seems to be a constant need to reset the WRT54G Router.  I was connecting wirelessly.  The system seemed to operate fine for a day or two.  I started to have problems with the connection to the internet dropping.  When it did this, I could not connect to the WRT54G setup page either.  I figured something locally here at the Camp in Iraq might have been interfering with the wireless, so I ditched the wireless and have been using wired connections.  The problems have not stopped.  I am constantly having to unplug and reset the router to reconnect.  When it hangs up, I cannot even connect to the setup page.  Occasionally, it will find itself without reseting the router, but most times, I have to reset.
    I have tried factory default reseting and manually reentering my settings.  I have just updated the firmware, but it didn't seem to solve anything.  In the past few minutes while trying to search for this problem here on this forum, the router dropped the connection twice.  The networking icon on the computer still indicates a connection, on the Vista is shows that a local connection is available only (during the problem).
    I have read a little online and this seems to be a common problem for Linksys.  I have 2 more of these routers, one at home and one at my office in the States.  Both have had the problems, just not as severe.  This router requires reseting at least 15 times a day during my 12 hour shift.
    I bought the Linksys Routers because they did have a reputation for reliability and quality.  Boy, I guess I should have researched this one a bit more.
    I have 5 IP addresses from my Satellite ISP, so I am considering configuring the Router as a Switch or HUB, but I am unsure on how to do this, or of it will even solve my problems.
    Any ideas?
    Thanks,
    Vincent

    I am having the almost exactly the same problem. It started about a week ago, (just like alot of others I have read on here recently) and I too will have no access to the set up page once it drops the net. I can still acess other computers on the router, but no net and no router set-up page until I reset it. I'm running the same router, without the firmware update. I have 4 desktops directly into the router..and one laptop wireless. Most of the time, the net will stay on for all the computers for surfing and email. Maybe once or twice a day it will drop access to the internet. a simple unplugging of the power cord resets it and everything is peachy. BUT....try to start a download.(usind DAP *download accelerator plus* or a bit torrent)...WHOA! it's anywhere from an instant drop to maybe ten minutes then drop. Most assuredly it will drop. we have had this router since January, and until a week ago, it worked just fine. no problems. Last week, our ISP upgraded their equipment and increased the bandwidth. (we have to use a cellular connection with a static IP being out in the boonies far enough that cable and DSL are still not available) The problems started at the same time and I thought it might be a problem with them. After testing one of the computers with a direct connection to the internet modem, everything, including a major download, worked just fine. It is definately a router problem. I spent quite a lengthy time on the phone with Linksys tech support, and the nice lady had me change the MTU rate from 1500 to 1300. It seemed to work, but about an hour after being done with the support call, things started to go wonky again. I am just about at my wits end!! Nothing has been changed on the router settings except that one thing that tech support instructed me to do. I am kinda leary about upgrading the firmware because I have been seeing a ton of *my router wont work with firmware update* or *now my router is frozen* posts. I have to type in a ton of settings because I am using a static IP and I really don't want to do all that again!! lol PLEASE, somone have a solution to this problem! It is driving me mad!! I would really hate to have to buy a new router, but my roomate is about to that point if this doesn't get fixed soon.

  • Ipod need to be reset all the time

    Hi recently my Ipod is acting weird. if i don turn it on for 1 day the following day i need to reset it else nothing happens.
    Is this supposed to be happening? I didn't hv this problem before.

    Anita,
    I know you said that you need to reset your iPod (and by that I take it to mean you have to do it yourself), but are you aware that the iPod resets itself after being left inactive for a period of 36 hours or so?
    See iPod Sleep.

  • Need to reset every time I turn iPod on

    For the past day every time my standard 20GB click-wheel iPod has turned off, both from me manually doing it and inactivity, I need to reset it to get it to come back to life (that is, hold the menu and select buttons). It's almost as if it is freezing every time it is off. Has anyone else come across this problem before and would be able to assist me in this matter? It's pretty frustrating. Thanks very much.
    -Robert

    For the past day every time my standard 20GB
    click-wheel iPod has turned off, both from me
    manually doing it and inactivity, I need to reset it
    to get it to come back to life (that is, hold the
    menu and select buttons). It's almost as if it is
    freezing every time it is off. Has anyone else come
    across this problem before and would be able to
    assist me in this matter? It's pretty frustrating.
    Thanks very much.
    -Robert
    Mine has done the same thing for about 2 months and there dosent seem to Be ANY help from Apple OR Ipod at all on any thing it seems that once thay have our money then thay dont want anything to do with us at all so it seems that the only thing we can do is to NEVER buy A another apple product I hve been trying to get some help with this since I bought my I pod New and I cant. ALL I WANT IS THE THING TO WORK LIKE IT IS SUPOSED TO IM Tired of the poor support....
    hi end lapto   Windows XP  

Maybe you are looking for

  • Datasource 0HR_PT_3 and end of month

    Hi experts We are using datasource 0HR_PT_3 for extraction of leave data. At the following screen you can see the change log of a standard DSO. A change has made on 25.08.2014. This change has been stored as new image. The new image is correct. At th

  • Ipod mini doesn't appear to be recognized by updater

    i have been having trouble with my mini. whenever i connect it to my PC, the ipod screen goes directly to ok to disconnect. I have tried the latest updater available but even when i plug in the mini when asked by the popup, the application never seem

  • Key figures in PM Orders

    Dear Experts, Can you please tell me what is the significant of u201CKey figuresu201D in Maintenance order cost Tab. How the same is distinct from value categories and activity type. How can you make use of this key figures while generating in mainte

  • Problem in activation using WiFi

    iPhone 3GS is not getting activated through WiFi after updating to firmware version 6.0.1

  • [Linux 8.1.2] Two up view: Odd Pages on Left Side

    Hi, Since upgrading to Version 8: In Two Up mode, the odd pages are shown on the left. This breaks facing pages, and is in conflict with the online manual at: http://help.adobe.com/en_US/Reader/8.0/help.html?content=WS58a04a822e3e50102bd615109794195