1600 all-in-one series printer error message to remove and check color cartridge will not go away

Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled).  Any help would be appreciated.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

Similar Messages

  • HP 1610v error message: Remove and check color cartridge

    In the middle of printing, my HP 1610v All-In-One PSC just stopped and displayed an error message reading "remove and check color cartridge". I did.... but couldn't really determine what I'm supposed to be looking for though. Ink cartridge is full, clean, and seems fine. Not only can I not figure out what I'm supposed to do to fix it....I can't do ANYTHING. no printer menu access, no printing with only the black cartridge, only an orange exclamation point that ceaselessly blinks at me.
    I've tried unplugging and waiting 20 seconds
    I've put 3 different color cartridges in and the error message only went away with the EMPTY cartridge...which, of course, I couldn't print with!
    Please Help ASAP!!
    Thanks!

    Hi there iceefrost,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Need to bypass "Remove and check color cartridge" error message

    I have an old HP printer giving me the error message "Remove and check color cartridge." I remove it, it's good, I put it back, same message. I try leaving it out, I get an error message asking me to install a color ink cartridge.
    I DON'T EVEN WANT TO PRINT WITH THIS PRINTER. I have a new HP printer connected to my wireless network that I use for all my printing. I am using the old printer for its scanning capabilities in my crafting area. I am JUST wanting to scan old pictures to an external hard drive for storage, so that I don't have thousands of print photos sitting around in boxes and files.
    Please help.

    I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
    After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
    I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

  • G85 printer says "remove and check color cartridge"'

    My G 85 all in one inkjet printer was working fine until it suddenly displayed "remove and check color cartridge". Now it won't print. I removed both the color and B/W cartridges and cleaned contacts on printer and on cartridges. After re-insertion same message. Removed color cartridge and installed a new color cartridge. Same message is displayed. Any help would be greatly appreciated.
    Phil

    Hi saratogaphil,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issues with an error on printer to Remove and check Cartridges.   I have a few different document for you to try. Please click on the following links for Print Cartridge Errors.
    You can also attempt to clean the product with the use of the following link on Cleaning the All-in-One as well as Maintenance and Cleaning.
    Once last step you can try is Resetting the Printer.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Photosmart 2575 cartridge error "Remove and check color cartridge"

    I have one of the above all in ones, which has given excellent service until recently. The last 2 colour cartridges (Both were original HP) have been acting up. When the cartridges were first installed all was well but as the ink levels fell to about half, I started getting a "Remove and check color cartridge" warning. I followed the instructions and cleaned the contacts on the printer and the cartridge and the problem seemed to be cured. The some time when I turned the printer on, the message re-appeared. Again, cleaning seemed to redress the problem. As the ink level fell further, the warning appeared more regularly, until at about one quarter, the problem could not be solved. I fitted a new cartridge and all was well again until that too had the self same problem. Now that has reached one quarter and the problem will not go away. As far as I can see, the contacts on both the cartridge and the printer are perfectly clean, the cartridge sits fair and square in it's position and there is no apparent damage to any part of the setup.
    Any assistance you can provide to resolve this problem would be gratefully appreciated.

    Followed this proceedure with both cartridges. When they were about half full this would solve the problem temporarily but it returned. As they got down to around quarter full this would not make any difference. Have now fitted a new cartridge and the printer is working as it should. Will have to throw away another quarter full cartridge by the looks of things. I will see how this one performs. Thanks for your help.

  • Re: the printer says remove and check color cartridge.

    How do I fix this problem ... the printer says remove and check color cartridge.  I have done this many times.  No change it still says the same thing.

    Please read this post then provide some details.  What printer model? What operating system?  Is the cartridge an HP or a third party?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • The printer says remove and check color cartridge.

    I have a HP Photosmart C4180 printer. I just put brand new ink cartridges in it today and it still says "Remove and check color cartridge."
    Now what?

    The troubleshooting steps in the document here may resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My 4215 all in one HP printer error message suddenly reads "remove and check right cartridge" .

    My all in one 4215 printer suddenly is flashing an error message in the screen saying "remove and check right cartridge"...For what I am checking it is unclear. I have removed and reinstalled the cartridge and it looks OK to me...It is not empty, and the last thing it printed was fine...Help!
    This question was solved.
    View Solution.

    I'm betting that the contacts inside the printer or on the ink cartridge are dirty. This happens over time. The document below will walk you through cleaning the contacts. Let me know what happens.
    http://goo.gl/9oXc9
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How do I fix error message remove and check color cartridge?

    I have a PSC 2355xi all in one printer. I recently tried to replace the ink cartridges. Error code...Remove and replace color cartridge shows in the printer window. Now the printer will not work at all and I haven't found the fix. HP "Customer Support" has been NO HELP AT ALL!

    Hello Kimosabe
    If you have not already please try this article it may help with your problem.
    Remove and Check Cartrdige Error
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Can not clear "Remove and check right cartridge" error

    I am trying to fix a 6110xi AIO printer that originally had the error "Remove and check cartridge". I have performed the following steps:
    1) Downloaded and attempted to install firmware update HpAiOFWUdate2_2.exe.  The software commented that the printer does not need the update and ended itself.
    2) Removed print cartridges and cleaned contacts on both the cartridges and the contacts within the printer
    3) Installed new ink cartridges.
    After installing the new cartridges, the error changed to "Remove and check right cartridge". The printer will now print a test page and print documents as well, but the error persists.  The printer will not scan anything at this time, and that is a highly desired operative function. I have also attempted to reset the printer with various power cycles and holding down the ENTER button and then pressing the MENU button, hearing the 3 fast beeps. How can I get the error to clear?

    Hi Lifechaser,
    I can certainly understand the frustration with all the steps you've done already. I just have a few more questions for you.
    Is the printer plugged to a wall outlet? (If not, unplug from the back of the printer first, before moving the power to a wall outlet)
    Are you using genuine HP ink cartridges? (If not, trying genuine HP may help resolve the issue)
    Get back to me with the results of these two questions and we will go from there!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HP PSC 1600 All-In-One error message remove and replace color cartridge

    I get the remove and replace color cartridge and printer or scanner won't work. I have replaced the cartridge with new ones twice and it still happens. Just installed a new HP color cartridge and no luck. I've tried everything I can think of.
    Please, does anyone have any other suggestions????
    Thank you,
    Mary Jean Kelso

    Hi MJKEL,
    Welcome to the HP Forums.
    I see that you are having an issue with errors on the printer pertaining the ink cartridges.
    I do have a few steps that we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I have also located a documet that deals with A 'Remove and Check [color / black / photo] Cartridge' Error Message Displays on the Printer Control...
    Please feel free to write me back if you have any other questions or concerns.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Can I share HP PSC 1610 All-In-One series printer through Bonjour?

    I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

    Hi my printer psc 1610 hp not picking paper

  • The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

    Is the Paper Size: set to US Letter and Scale: set to 100%
    Dennis

  • I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program.  I can't find that program in my Apple updates file.

    I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program update.  I can't find that program in my Apple updates file.  Please help.

    From the HP Support site, this may help:)
    "Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
    Options 
    08-10-2012 10:54 AM
    Download and install this: http://support.apple.com/kb/DL907
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
    Hope this helps

  • Hp 1512 all in one series printer

    i have a hp 1512 all in one series printer the software that came with it says hp 1510 all in one series printer is this the right software

    Hi blanche2,
    I understand you are inquiring if you have the proper software CD for your printer. Yes you do. A printer much like a car has a series that contains a base model and a few others. By adding different features and options to the base model it will create a different model number under that original series. The base driver will be the same for all the printers, but each model will have certain extras. Also different store chains will be assigned a different model number in that series depending on the promotions that are offered at that particular chain.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

Maybe you are looking for

  • Passing TABLE NAME as parameter is possible or not?

    I want develop a small/simple report like this TABLE NAME : WHERE : ORDER BY : QUERY ROWS In the above model i want to pass all the three (TABLE NAME,WHERE and ORDER BY) as a parameter. My doubt, is that possible to pass TABLE NAME as a parameter? If

  • Issue with ALSA softvol and reloading sound card module

    I'm using a Chaintech AV710 card with the snd_ice1724 module as a driver. The core issue is that sometimes when this module is loaded during startup (or every time after a suspend), it will play nothing but very loud static. To fix this, I simply rel

  • Re: Satellite L70-A-13E and Win 8: Twain driver for built-in webcam required

    Hi, My application require TWAIN DRIVER for Web Camera of Satellite L70-A-13E on Windows 8.1. Would you please tell me how can I get it? regards Nevzat

  • PDF Booklet Printing

    In PDF Booklet printing how do I ensure that center column (for binding) is properly aligned?

  • Display on iMac freaking out

    My wifes iMac (Intel 2.66 GHz/1 G Ram/ 20" display)has recently began to freak out with numerous blank blocks on the screen (up to 12) opening up when switching applications. It doesn't happen when working in an app, only switching between apps. The