1602 and 1604 errors when updating to 1.1.3 firmware

So like many people today, I tried to update my Touch's firmware to 1.1.3. Using iTunes 7.6, I downloaded the file, but then when it goes to update, it gets stuck on the "Preparing iPod for update" step and then comes back telling me that the iPod could not be updated, giving either a 1602 or 1604 error. I can restore back to the 1.1.2 firmware with no problems, but after multiple attempts, multiple reboots, multiple reinstalls of iTunes, and multiple forced restores, I still can't update the firmware to 1.1.3, getting the same error each time. A quick Google search reveals that I'm not the only one having this problem, so I hope a fix is worked out quickly. I guess I shouldn't be in much of a hurry, seeing as there appear to be a slew of other problems with the new application pack anyway.

I had all of these problems, and I was able to fix them with the following process. Here is what I did:
My setup:
Apple Max OS 10.4.10, Mac G4, with 3rd party USB 2.0 card.
1. Upgrade to iTunes 7.6 and Quicktime 7.4, Restart and repair permissions
2. Purchase the iPod Touch Upgrade - It took two tries to purchase. I had to accept to two agreements, and then got an error. I purchased the upgrade again and got an instruction screen. iTunes appeared to download a very small file.
3. Sync my touch (I still had not upgraded to firmware 1.1.3)
4. The touch synced, but I had no new functions.
5. I clicked upgrade, and downloaded the 165GB file.
6. While the file was downloading I undocked my iPod touch and restarted it.
7. When the download was complete, it gave me an unknown error because my iPod was not connected.
8. I connected My iPod and tried to install the update. After several tries, I always got a 1602 error.
9. I restarted my computer and did a hard restart of my ipod touch. This did not work, I still had 1602 errors.
10. At this point, I chose to RESTORE my iPod Touch.
11. After the restore, I chose not to restore any content, and just tested the firmware update. EVERYTHING worked great!
12. I synced my iPod touch while I watched the keynote. 45 minutes later my sync was complete and 14 Gig of content was restored. The new functions are great. I have already read my .Mac email.
Message was edited by: gotabmac

Similar Messages

  • 1602 and 1604 Errors When Attempting to Restore/Update iPhone - Please Help

    Hi, I've been having trouble with my iPhone 3GS and after wasting many days on trying to solve the problem, I am reaching out for help from those more knowledgeable than me. I have been having this problem for as long as I can remember (I've owned my iPhone for just under a year): whenever I attempt to Restore my iPhone or update its OS, I receive a 1602 or 1604 error on iTunes and the process stops with the iPhone wiped. iTunes refuses to continue the Restore and any further attempts result in the same error. I originally found this work around for the problem after an exhaustive search (4th post down):
    http://discussions.apple.com/thread.jspa?threadID=1363589
    However, every time I wish to Restore or update, I have to follow these long, annoying, unusual steps, and, now that I am coming to the end of my year's warranty, I really want to fix this problem, or get it fixed by Apple if this is not possible.
    The iPhone restores with no problem on another computer in my house, so I guess the problem is with my computer. I have taken the following steps (often many times over and in combination with each other) in my attempts to fix the problem, but with no success:
    1. Uninstalled and reinstalled iTunes
    2. Uninstalled and reinstalled iPhone drivers
    3. Uninstalled and reinstalled all Apple software and drivers
    4. Removed iTunes library, all music and any other iTunes files in music folder
    5. Created a new user account, which is free from any old iTunes settings, opened iTunes and plugged in iPhone
    6. Used different USB ports
    7. Plugged in iPhone after being restored on other computer
    I'm running out of ideas. Can anyone please help?
    Thanks,
    James

    I had all of these problems, and I was able to fix them with the following process. Here is what I did:
    My setup:
    Apple Max OS 10.4.10, Mac G4, with 3rd party USB 2.0 card.
    1. Upgrade to iTunes 7.6 and Quicktime 7.4, Restart and repair permissions
    2. Purchase the iPod Touch Upgrade - It took two tries to purchase. I had to accept to two agreements, and then got an error. I purchased the upgrade again and got an instruction screen. iTunes appeared to download a very small file.
    3. Sync my touch (I still had not upgraded to firmware 1.1.3)
    4. The touch synced, but I had no new functions.
    5. I clicked upgrade, and downloaded the 165GB file.
    6. While the file was downloading I undocked my iPod touch and restarted it.
    7. When the download was complete, it gave me an unknown error because my iPod was not connected.
    8. I connected My iPod and tried to install the update. After several tries, I always got a 1602 error.
    9. I restarted my computer and did a hard restart of my ipod touch. This did not work, I still had 1602 errors.
    10. At this point, I chose to RESTORE my iPod Touch.
    11. After the restore, I chose not to restore any content, and just tested the firmware update. EVERYTHING worked great!
    12. I synced my iPod touch while I watched the keynote. 45 minutes later my sync was complete and 14 Gig of content was restored. The new functions are great. I have already read my .Mac email.
    Message was edited by: gotabmac

  • Errors 1602 and 1604 trying to update from 1.1.4 to 2.0!!!

    Hi all.
    So I have two iPod Touch devices in my home. I purchased and downloaded the 2.0 update this morning. It got halfway through the update and then died, leaving the iPod in recovery mode where the display shows the sync cable and the iTunes icon. At first it gave me the 1602 error, and every time I tried to Restore it, iTunes would think about it for several minutes and eventually give me a 1604 error.
    After two hours on the phone with Apple support, I got it to work by plugging the iPod into a different USB port on my computer.
    Updating the second iPod had similar difficulties, except I couldn't fix it by switching USB ports. Another call to Apple, and again no real solution. They had me go to another PC and try restoring and iTunes then downloaded the 1.1.4 firmware and installed it, although my iPod was now wiped.
    I tried the 2.0 update on the new computer and now I'm right back to the 1604 error.
    What the heck is going on?!? Two different computers and I can't update this thing.
    It is NOT jailbroken or in any way modded - it was purchased brand new from Best Buy and has been treated like a baby its entire life.
    I am desperate, frustrated, and exasperated.
    Anyone, please, pretty please, oh please . . . can you help me?
    Paul

    Hello all, I have the same problem. It is very frustrating. I have a single iPod Touch and two USB ports. The following steps have been taken, starting with my OOTB 1.1.4 iPod Touch running Windows XP:
    1. Upgrade iTunes to 7.7, purchase version 2.0 of software for $10 and attempt to install via iTunes - failed with Error 1602
    2. Exited recovery mode (this process has to be completed after each failed attempt as otherwise I am stuck with the USB cable / connect to iTunes image on the Touch's screen), attempted to perform restore via iTunes, selecting 2.0 software as source - failed
    3. Kicked out of recovery mode, attempted restore, selecting 1.1.4 software as source - failed
    4. Uninstalled iTunes / Quicktime / Apple Mobile Device Support / Apple Software Updater as per WinXP instructions at http://support.apple.com/kb/HT1925?viewlocale=en_US. Repeated attempts above - failed
    5. DID NOT kick out of recovery mode, closed iTunes, started iTunes again. Prompted with "Detected an iPod in recovery mode, must be restored before use" - clicked restore, selected 2.0 as source - failed
    6. DID NOT kick out of recovery mode, closed iTunes, started iTunes again. Prompted with "Detected an iPod in recovery mode, must be restored before use" - clicked restore, selected 1.1.4 as source - failed
    7. Did several of the above steps with nothing else connected to USB ports, and switching up the USB ports - failed
    I seem to have exhausted all tips I have found online through Google and various forums, including the ridiculous instructions from Apple to just remove all Apple software and reinstall. What a waste of time. Anyway, the ONLY tip I have not attempted is to perform a restore / upgrade on a second computer - I don't have access to one at the moment and would like to solve this another way.
    I am definitely open to more suggestions as I would really like to get 2.0 up and running. I mean - I paid for it and this Touch is only about 3 weeks old!

  • R5034 Runtime error when updating ITunes  help - deleted all iTunes/Apple programs and reinstalled ITunes

    R5034 Runtime error when updating ITunes  help - deleted all iTunes/Apple programs and reinstalled ITunes
    help please ?

    solved problems and reinstalled  - 4 hours wasted trying to fix iTunes ...
    Apple could do better to inform users when updating and upgrading  .....

  • Error when updating Playbook OS version via Blackberry Desktop Manager

    Greeting,
    I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
    But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
    I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
    I've attached the step by step screenshots for reference, where you can find here:
    http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
    Thanks,

    BLock wrote:
    Sorry I can not help you with your problem but perhaps you can help me.  
    Can you advise where I can find info on "disable the automatic update"?
    just ignore the update if you dont want it on the playbook
    for reloading the OS
    First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
    This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
    After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
    Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
    You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
    QUICKLY choose the Update option.
    This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Error Loading Hierarchy Error when updating Idocs in Source System

    Hello  Friends,
         I am loading  hierarchy data  using Info pac into  0FUNDS_CTR . I have selected  a hierarchy under hierarchy selections tab  in the Info pac .
    All Partner profiles in WE20 seems OK .   But When I loaded data , throwing errrr message  as below
    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    When I checked in TC WE05 says that  IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
    Please advice .
    Many thanks

    Hi  Krishna4bi,
    Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem  if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
    Hope it helps,
    By,
    Praveen Yagnamurthy,
    SAP BI Consultant,
    Blue Marlin Systems-INDIA.
    http://bluemarlinsys.com/bi.

  • Error when updating Idocs in Source System - Urgent

    Hi Team,
    When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
    When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
    <b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
    Can any one please help me to solve this error.
    This is am Urgent requirement for me to deliver.
    Thanks & Best Regards,
    Venkata.

    Hello VenkaTa,
    How r u ?
    The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
    Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Error when updating

    I get an error when updating. The message states,
    Adobe Photoshop Elements 12.1 update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop Camera Raw 8.5
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Do you know what causes this issue?

    Please see- https://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html
    This error code occurs when multiple instances of Updater are open. Please refer to following forum link for more details: http://forums.adobe.com/message/4913117#4913117#4913117
    Thanks
    Andaleeb

  • Error when updating! Help please!!

    I've been having a problem with the artwork updating on my 5th iPod. I kept getting an error when updating in iTunes whenever I added artwork to songs. So I was told to go into iTunes and go under iPod options and UNCHECK the box to display the artwork on my iPod. Then click okay. Then, go back into it and CHECK the box TO display the artwork and I get an error; "..Unknown Error occurred (-50)". Same error. And yes I have pressed the center button on my iPod to scroll through the different things. And I have restarted the program and computer. Tried disconnecting hte iPod, closing the program, restarting computer, restarting iTunes and reconnecting iPod and every combination of the steps (I've done many searches on this subject here) and same result. I've tried other different things but it all ends up to this error. Can some one please help me
      Windows XP Pro  

    Hi Melophage,
    I managed to do a OS X Recovery Reboot by restarting my computer and holding down Command and 'R'. I reinstalled OS X, and now my computer is working again.
    However I'm going to take my computer into the Genius bar for review.
    I have a Macbook Pro from 2012 (with a 2.6 GHz Intel Core i7 Processor) and was attempting to update OS X (I think Version 10.8.5).
    Many thanks for your message.

  • Received the error when updating to inDesign 2014 "Unable to extract to temp directory."  c

    Received the error when updating to inDesign 2014 "Unable to extract to temp directory."  Anyone have a fix for this?

    Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.

  • I keep getting errors when updating from the Creative Cloud (49)

    I keep getting errors when updating from the Creative Cloud (49).
    " Update Failed" and when I click on Learn More. The error messages says there is a download error with (49)  I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

    Error 49 https://forums.adobe.com/thread/1491394
    -and https://forums.adobe.com/thread/1353632
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Error when updating software (OS6) for BB9300

    Hi,
    Please help me, when I try updating the the OS of my BB9300 it says : there's an error when updating your software.
    I  want to update my OS to OS6. 
    PS, I use BB Desktop Software Manager.
    Many Thanks! and Godbless!

    Multiple posts of the same message:
    http://supportforums.blackberry.com/t5/BlackBerry-Curve/can-upgrade-my-OS/m-p/3012574#nobanner
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error when updating to 4.2

    My Ipod Touch is on ios 2.2.1 and always get error when updating to 4.2

    I think you have a 1st Gen iPod Touch. You can only go up to iOS 2.2.1 OR you can purchased the iOS 3.1 firmware.
    http://support.apple.com/kb/ht2052
    Purchase the iOS 3.1 Software Update directly from the iTunes Store.
    IF NOT, then try to get a better internet connection (if connect with Wi-Fi) or wait a while and try to reupdate again. If you have to make sure iTunes is up to date (iTunes 11.x)
    Message was edited by: keeferaf

  • Error when updating HANA Live Authorization Assistant

    Hi Guys,
    I'm trying to use the HANA Live AAA component for the creation of HANA Roles and it works fine when trying to generate the roles but it throwing me an error when updating them. The error happens at the beginning when the plugin attempts to load the Users from ECC. The message is:
    SAP DBTech JDBC: [1300]: fetch returns more than requested number of rows: [1300] "_SYS_BIC"."sap.hba.tools.auth.db/GetUsers": line 20 col 1 (at pos 1770): [1300] (range 3) fetch returns more than requested number of rows exception
    Anyone has gone through this error before??
    Thanks!
    Cheers.

    Ok Guys. No answer to this just yet.
    We decided not to use the tool and build our security with HANA security functionalities. It takes a bit longer but It's more robust in the long run in terms of maintenance.
    Cheers.
    Christian.

  • Error when updating ODS

    Hi,
      We got an error when updating ODS.
    The error message is "RSDRO_UPDATE_ODS".
    Its fetching all the records and its giving an error "when saving the aggregation information for ODS".
    We rectified the error.
    But how to fix it permenantly, what might be the reason for this error.
    Thanks in advance!!

    hI,
    I executed the program and there are no errors in the program and the program is active, but still we are often getting the error when updating the data in ODS.
    Please suggest me what might be the problem behind this....
    Thnaks in advance!!

Maybe you are looking for