1602 AP doesn't join my backup vWLC

Hi everyone,
I have a problem with my vWLC and AP 1602. I have the vWLC 1 with 7.4.121. software in cloud and 3 AP's 1602 and it is working fine. And I tried to make a Backup Controller vWLC 2 on Local network. I downloaded the cfg file, changedn the IP adress and uploaded on my new vWLC 2 with 8.0.100.0 software. The vWLC 2 picked up the VLANs and it has same configuration like the vWLC 1 but it can't see AP's..
Did anybody have a similar problem and managed to fix it?

Yes, I did that.
When I checked statistics of "AP join", I saw that the vWLC 2 reciveid requests from AP's and then vWLC 2 sent response to AP's but still AP's didn't join to vWLC 2. I think that the problem is new version of software(8.0.100.0) on my vWLC 2 whose software supports 15.3.3 IOS version of AP's , but on my AP's is still 15.2.2 version ( because the software 7.4.121.0 on my vWLC 1 supports that version of AP's IOS).
I dont know what should be my next step?

Similar Messages

I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work docum The installation run perfectly,

I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), The installation run perfectly, but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work documents (I'm a lawyer!!), my kid's photos.... How can I restore my files?? Help!!

Since you seem to be using a new disk for Lion, Time Machine will consider previous backups to be for a "different" computer. Try doing a control-click or click-and-hold on the Time Machine icon in the Dock, then choose "Browse Other Time Machine Disks". This should allow Time Machine to see the previous backups.
In the worst case you should be able to open those Time Machine backups and copy your documents from there to your home folder.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

My i phone 4s ios 7 doesn't join the network

my i phone 4s ios 7 doesn't join the network

Well, for the time being (I mean, if Apple does not go back to the bolt/plug icons) if the device shows 100% then it's fully charged.
But feel free to let Apple know that you want it in http://www.apple.com/feedback

Backing up to a thumb drive - time machine doesn't delete older backups when it's full. I will have to erase and re-do the drive. Why?

Backing up to a thumb drive - time machine doesn't delete older backups when it's full. I will have to erase and re-do the drive. Why?

You are both right.
Time Machine can backup FROM:
It cannot back up a USB thumb drive.
Time Machine can backup TO:
•A USB thumb drive (but most aren't large enough, and are very, very slow)

TM doesn't see its backup after migrating to new iMac and restoring system.

TM doesn't see its backup even though it still exists on the HD. I just migrated to a new iMac. After using OS X disc to 'Restore System From Backup' with TM backup it was showing the latest backup attempt had failed. The same disk was highlighted under TM Preferences too. But once I reset it TM began to make a new backup under a new folder/computer name (adding a number to the end). Is there a way to make TM see the existing BU and continue on?
Message was edited by: Sakahara

I'll try to recall to the best of my memory what I did... It's been stressful, frustrating, trying to deal with it.
Computers:
1) iMac6,1 (Late 2006) Intel 2.16 GHz Nvidia OS X 10.5.6
2) iMac8,1 (Early 2008) Intel 2.8 GHz ATI OS X 10.5.4
Perform final backup of iMac #1 with TM and SuperDuper!
Shut down and disconnect.
Hook up iMac #2 and power up.
After OS X intro select 'Transfer from another Mac' with Set Up Assistant (note: this was from the SD! backup).
Everything was selected for transfer; Users, Apps, Network,..etc. (I assumed it would update OS X too).
Transfer complete.
Restart.
Log in.*
* I have both Admin and User account. I noticed things weren't performance was off; log in was slow (Menu Bar items took longer to display, clock too), and generally overall apps,..etc seemed slow. Apps were asking for license and reg info too.
Second attempt (restore system from TM backup):
Startup from OS X 10.5.6 disc.
Erase HD with DU.
Select 'Restore System from Backup'.
Select TM backup.
After that completed, restart computer.
And that brings us to now. Well, sort of.
So what is the proper way to migrate as it were from between two different Intel iMac's? I have to assume I transfered over system files that caused a conflict with the new iMac's HW, correct? What can I do now? I've already performed new backups of both SD! and TM. I didn't think it mattered since either way the backups come from my old system. I'm guessing I should have updated OS X first on the new iMac and only selected User files, Apps, Network settings,.. etc., for transfer, or maybe installed apps fresh. I thought I was doing it correctly.
The new iMac still seems off with performance to me. I've tried performing multiple 'Repair Disk Permissions' too. There are about 32 differing permissions but DU doesn't seem able to repair them as they come up again and again. Here are some examples;
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
My final attempt to straighten this out is to install from OS X disc fresh (erase/install). Transfer only User files, Network settings, anything pertinent to my Users (email, browser, keychain,..),... and nothing else. Reinstall 3rd-Party Apps. I had to do this before after updating from Tiger to Leopard because it didn't take well.
Any help/insight appreciated.

Powerbook airport doesn't join to wifi

Since I have upgraded my powerbook to 10.4.2 and now to 10.4.3, airport card doesn't join with my modem/router WiFi.
Following the error messages from both console and system.log:
WirelessJoin unexpected status: 4
Nov 1 11:23:28 Voyager kernel[0]: AirPort: Link DOWN (AP deAuth 0)
To join to wifi network, I must use an old 350 aironet cisco pcmcia card. To return to use my airport card I must down-upgrade to 10.4.1 or there are some other actions to do?
Thanks a lots
Biagio Incremona

Can you please help me?

OSD task sequence computer doesn't join domain - error NetJoinDomain failed error code is [1355]

I am using sccm 2012R2 and trying to deploy a task sequence to Ultrabook UEFI with usb Ethernet adaptor
I have inject network drivers in boot image and in sccm.
Task sequence runs fine till Setup Windows and Configuration. After this step computer reboots and boots in windows with local administrator account. Doesn't join to domain
I have tried ping domain and domain controller during Apply network Settings, I can ping fine and get an ip address as well.
setuperr.log file shows following error:
[Djoin.exe] Unattented Join: NetJoinDomain failed error code is [1355]
I can image other computer using x86 bootimage fine.
It is x64 boot image with UEFI Task sequence which is causing issues for me.
I have tested domain join AD account and able to do domain join same machine manually.
Need advise, not getting anywhere, already spend few days to figure out.
RJ
RJ09

Ultrabook I am using have SSD if this could be part of problem.
I also see errors in Panther\UnattendGC\setupact.log
[DJOIN.EXE] Unattend Join: DebugJoinOnlyOnThisError =[Null]
[DJOIN.EXE] Unattend Join:DsGetDcName failed: 0x54b, last error 0x0, will retry in 5 seconds
[DJOIN.EXE] Unattend Join:DsGetDcName failed: 0x54b, last error 0x0, will retry in 5 seconds
About 20 times
Exit, returning 0x0
RJ09

My imac doesn't recognize my backup drive anymore,what can i do?

My Imac doesn't recognize my backup drive anymore,what can i do?

Unfortunately, that usually means the drive has died although it doesn't mean some other hardware failure or even software failure (in some cases.)
I think the wise thing to do is take it in for service.

Why PC Companion doesn't support SMS backup?

Hi!
Why PC Companion doesn't support SMS backup?
So clear to need it as a base features
May be it has a recommended third party software?

Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Sister was using my iPod, she changed Apple id to hers, then forgot the iTunes password, now it's disabled she doesn't know what backup email she use or the security questions HELP can Apple reset my iPod?

sister was using my iPod, she changed Apple id to hers, then forgot the iTunes password, now it's disabled she doesn't know what backup email she use or the security questions HELP can Apple reset my iPod?

Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

AP1142N doesn't join his WLC (5508)

Hello,
My APs 1142N don't join their WLC. APs and WLC management interface are in the same vlan (WLC can ping all the APs). It is strange because it doesn't seem like they are trying to contact the WLC.
What's strange is that I have other AP 1142N which joined this WLC without any problem.
(Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.0.98.214Bootloader Version............................... 1.0.1Field Recovery Image Version..................... N/AFirmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27Build Type....................................... DATA + WPS ...
ap#show versionCisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Wed 16-Sep-09 18:09 by prod_rel_teamROM: Bootstrap program is C1140 boot loaderBOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA6, RELEASE SOFTWARE (fc1)ap uptime is 43 minutesSystem returned to ROM by power-onSystem image file is "flash:/c1140-k9w7-mx.124-21a.JA1/c1140-k9w7-mx.124-21a.JA1" ...cisco AIR-AP1142N-E-K9 (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.Processor board ID FCZ1649D2U0PowerPC405ex CPU at 586Mhz, revision number 0x147ELast reset from power-on1 Gigabit Ethernet interface2 802.11 Radio(s)32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: E0:2F:6D:A5:AA:F6Part Number : 73-12836-06PCA Assembly Number : 800-33767-06PCA Revision Number : A0PCB Serial Number : FOC164732R2Top Assembly Part Number : 800-33775-05Top Assembly Serial Number : FCZ1649D2U0Top Revision Number : A0Product/Model Number : AIR-AP1142N-E-K9
Regards,

Ok thank. I didn't notice that it was an autonomous image.
It seems that I can't use this guide (http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157147) to upgrade them to lightweight (can't install software on windows seven).
Regards

ITunes doesn't perform automatic backup

hi, i have Yosemite last version. I noticed that plugging ny iPhones to imac doesn't even performance automatic backup in imac. Why?

I was unaware that iTunes has ever performed an "automatic" backup. I thought this was done manually.

Time machine doesn't delete old backups when disk is full

TM disk is 750GB. It tells me there is not enough room for backup…then I look into TM and find there ARE NO BACKUPS anymore. (There were a few days ago.) All backups are gone, except for one two days ago, which was when I began getting the "no room" error.
I assume I've lost everything, as the TM disk shows only the backup from 2 days ago. True?
Do I just format and start again?
Is there a fix for this "no room" message? (It says oldest backups are deleted when disk becomes full. But it doesn't do it.)
Do people rely on this?

How much data is TM backing-up? (What's shown for +Estimated size of full backup+ under the exclusions box in TM Preferences > Options?)
Note that your Time Machine disk should, in most cases, be at least twice the size of the data it's backing-up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
It appears that Time Machine needed to do a large backup, perhaps a full one, for some reason, and deleted as many old backups as it could (but it won't ever delete the last remaining one, as that would leave you with no backup at all), trying to make room.
If in doubt, Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the backup in question, then copy and post all the messages for that run here, along with the amount of data that TM is backing-up.

Time Machine running out of space but doesn't delete old backups

First some context:
I am running Parallels Desktop on a 2011 iMac. The VM is on a partition that is excluded from Time Machine.
I have a second partition where I copy the VM every night using CCC. (This avoids TM backing up a large VM every hour).
TM says initial backup is 220 GB. I have a 1TB USB drive attached. So normally, this works fine.
This morning 100GB were copied to my Parallels Desktop partition. So TM should copy something in excess of 100GB during backup.
Currently, only 15GB are free on my backup volume. But TM doesn't try to delete old backups. It doesn't seem to recognize the size of the backup. Instead when it starts, it predicts about 1GB to backup. Then during backup the amount grows (note that no new data is changed during backup!) and it finally hits the wall at 15GB because the disk is full.
Any idea why TM doesn't figure out the real backup size?
Here's the log from TM Buddy:
10.12.12 13:25:13,472 com.apple.backupd[27667]: Backing up to: /Volumes/Time Machine-Backups/Backups.backupdb
10.12.12 13:38:34,588 KernelEventAgent[48]: tid 00000000 type 'hfs', mounted on '/Volumes/Time Machine-Backups', from '/dev/disk1s2', low disk
10.12.12 13:38:34,000 kernel[0]: HFS: Low Disk: Vol: Time Machine-Backups freeblks: 38389, warninglimit: 38400
10.12.12 13:38:45,000 kernel[0]: HFS: Vol: Time Machine-Backups Very Low Disk: freeblks: 25589, dangerlimit: 25600
10.12.12 13:38:45,066 KernelEventAgent[48]: tid 00000000 type 'hfs', mounted on '/Volumes/Time Machine-Backups', from '/dev/disk1s2', low disk, very low disk
10.12.12 13:38:45,088 mds[42]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/Time Machine-Backups" because it is low on disk space.
10.12.12 13:39:47,794 KernelEventAgent[48]: tid 00000000 type 'hfs', mounted on '/Volumes/Time Machine-Backups', from '/dev/disk1s2', low disk
10.12.12 13:39:53,885 com.apple.backupd[27667]: Error: (-34) SrcErr:NO Copying /Volumes/WBackup/Parallels/Smart iMac Windows 7.pvm/Smart iMac Windows 7-0.hdd/Smart iMac Windows 7-0.hdd.0.{a09d01ec-5596-4f65-b4cd-86aeff90082f}.hds to /Volumes/Time Machine-Backups/Backups.backupdb/Smart iMac/2012-12-10-072536.inProgress/3380F092-9336-408F-90EB-387FDE60A79D/WBackup/ Parallels/Smart iMac Windows 7.pvm/Smart iMac Windows 7-0.hdd

I would highly recommend the following resource to help you with this problem:
http://pondini.org/TM/Troubleshooting.html
Hope this helps

Time Machine doesn't delete old backups

Hi,
I keep getting errors from the TM backup that the disk for backup is full. It appears that TM doesn't delete the old backups that are on the disk. Any idea why it is not deleting the backups to make space? I also checked the button to notify me when deleting....useless....I am using Lion/Mountain Lion
Thanks

When you have issues of this sort.. Pondini is your man..
See http://pondini.org/TM/Troubleshooting.html
There is no need for admin / Root / SU login to TM.. that will not achieve anything.
You can delete the current set of TM preferences and start over.. See A4.
You have to delete the whole existing backup to start over. Or archive it off as I said if you want historical record, and erase the disk.
You erase the TC by using Airport Utility, under disk is erase option.. that is the fastest way. A quick erase via AU takes about 1min. Do use any other erase option, as they will take several hours.
You can also delete a sparsebundle.. but it is a long and time consuming process. That is important though if you have multiple backups on the TC you do not wish to lose.
See Q12 here http://pondini.org/TM/FAQ.html
There are many many posts about how to speed up deletion of large backups.
eg https://discussions.apple.com/thread/2224110?tstart=0

1602 AP doesn't join my backup vWLC

Similar Messages

Maybe you are looking for