160gb classic won't sync after adding a new album to the library..'sync' lettering in devices is not highlighted

All was fine until i bought two new albums and tried to sync them today. They appear along with artwork in the library but the 'sync' lettering in 'devices' isn't highlighted and syncing simply does not take place.
I had to re-install Norton anti-virus software today but otherwise cannot think of any possible explanation for the lack of response.
Ipod is close to being full but i think i have enough space left...i can't delete any albums now anyway..except from the library.
I have re-installed i-tunes.
Help gratefully welcomed

Ok I've got some additional info. If I reload the offending videos into itunes as Movies rather than TV shows then the'll load onto my iPod. Anyone know why my iPod would let me load it with a movie but not let me load it after the exact same video is changes to a tv show? Someone has GOT to know something. Please people please!

Similar Messages

IBooks won't open after adding a new PDF

This topic has been posted before and there are really no resolutions that I can see. I added a 2 page pdf to iBooks and it closes as soon as it encounters the pdf on the shelf. I've tried just about everything suggested. Finally I tried deleting it in finder and iTunes and then deleting iBooks and downloading a new iBooks but it just won't go away. I am SO happy that most of my stuff is on Kindle. I won't use iBooks for anything further. Kindle is great and always there for me. It's terrible all the posts and no help from Apple.

Hi there Eyes-only, I'll see if I can help you with this problem.
Try some basic trouble shooting steps first to see if they help the problem:
• Multi tasking quit iBooks (double click the home button then slide ibooks away)
• Perform a hard reset on your device (hold down the power button & home button until you see the apple logo)
If these fail to solve the problem, you're going to have to move onto some more time consuming steps.
• Backup your device then entirely reset & erase it, then setup your device again restoring it from your backup via iCloud.
• Failing this, attempt a software reset using iTunes
Let me know if any of these steps resolve the problem, or get you any further to a solution.
Kind Regards.
- Mike.

Adding a new PDF to the library of books to use in iBooks via iTunes fails

Hi everyone who is not a beginner at his/her mac,
I try to add a new PDF file the my iBooks Library using the iTunes app, but this does no more work for me. I looked in the System log and found that there is a problem to put a finder window to front.
A part of the messages which could be related to this problem are:
2014-01-26 18:51:10 +0100 launchservicesd[54]: Application App:"Finder" asn:0x0-b00b pid:256 refs=8 @ 0x7fc37060f6e0 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x25025 pid=460 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100004/0x186a4 queue
2014-01-26 18:51:10 +0100 WindowServer[104]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xb00b, securitySessionID=0x186a4, err=-13066
What is the reason for this behavior? How to fix it ?
The next problem is reported in the log file with the following:
2014-01-26 18:54:17 +0100 MDCrashReportTool[464]: 464:3674112|CrashReportCopierAFC.m:-[CrashReportCopierAFC copyAndProcessRemotePath:usingConnection:]| ERROR: Could not remove remote path at ./DiagnosticLogs/security.log.20140119T105324Z.gz
I would be lucky if someone could help.
Hartmut

If it's a zip file that just contains the classes,
then (brilliant insight here) change it's name so
that it's a jar file. If it's a zip file that
contains a bunch of documentation and readme files
and also a jar file that contains the classes, then
extract that jar file and use it.Do you mean that the only difference between jar files and zip files is the extension name???

What is the expected behavior in a zone after adding a new static route in Solaris 10....

Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.com

Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

160gb ipod classic won't sync since update to 11.2.2, system wants to wipeout all current info on device

160gb ipod classic won't sync since update to 11.2.2, system wants to wipeout all current info on device

same has happened to me, on and off, for the last 6 months. Its an issue with the Mavericks system and ipod classics. works great for a while - then one day for no reason - erases the entire iPod. some days the copmputer will not recognize the iPod and you have to start over. Apple will tell you that "you" may have a disc problem in the device. that is all the help I have received.

Ipod classic won't mount after updating to itunes 11.0.2

ipod classic won't mount after updating to itunes 11.0.2.
I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
I've restarted the ipods 10+ times each.
All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
Machine is a Mac Pro running 10.6.8.

Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

My iPod classic won't sync at all. I've synced it on the same macbook for many years.

My iPod classic won't sync at all. I've synced it on the same macbook for many years.

See Corrupt iPod classic.
tt2

IPod Classic won't sync to PC

My iPod Classic won't sync with iTunes on my PC. An error message is received stating that there is not enough memory available to sync, but I have 101 GB free on the iPod. I'm using iTunes Version 10.6.3.25 on a PC with the Vista operating system.The iPod operating system is 2.0.1 PC.

It sounds like your PC may be too low on memory (RAM) or Hard Drive in for the iPod to sync properly with iTunes. Try rebooting your PC to see if that helps. Then run only iTunes and try to resync your iPod.
B-rock

IPod 160GB Classic (late 2009) sync & related problems

My pod went weird while syncing this afternoon.
First the iTunes started freezing & the pc subsequently hanging after adding just a few of the freshly imported songs.
Incidentally, all my songs are imported from legit audio cds or paid downloads.
On every occasion i had to re-boot my pc to start over.
Re-booting with the pod connected does not work either (though i have never tried this before), as the pc stalls after the windows splash screen.
On the 3rd attempt the ipod stopped appearing on itunes altogether!
Then it became invisible to explorer completely.
The "connected" warning & rotating graphics are playing on the pod though!
Finally the pc started freezing everytime the pod was plugged in BUT is waking up on removing the pod.
iTunes on its own is working fine.
On checking the iPod i found that it has come down to only "49" songs (from 5530 orginally) & the memory status is showing 148GB used!!!
Fortunately the library on my HDD is intact & i am still within warranty period
However, after going through some of the threads here, it seems this is a well-known issue.
Will be grateful if anybosy could help me.
BTW, trying to download a fresh iTunes on top of the existing one (whic was updated last week).
In case that helps.
Have tried restore etc., without any effect.

Ok I've got some additional info. If I reload the offending videos into itunes as Movies rather than TV shows then the'll load onto my iPod. Anyone know why my iPod would let me load it with a movie but not let me load it after the exact same video is changes to a tv show? Someone has GOT to know something. Please people please!

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now on my device and no matter how many ways I try its not worked

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.

I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

MacBook Pro won't sync with other devices

My MacBook pro won't sync with other devices in the house. My iPad and iPhone sync OK but MacBook won't for some reason. Can you help?

Sign into your account in iTunes - from that page you should be able to deauthorise ALL 5 authorised computers - supposedly you can do this once a year.
Thereafter any devices you no longer have will be deauthorised, and you can reauthorise those you still have or are new.
AC

Logical standby issue after adding a new user at production db server

Hello Experts,
I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
tried below .....
SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
got error
ORA-16227: DDL skipped due to missing object
ORA-01403: no data found
ORA-00942: table or view does not exist
OS : RHEL 4 (IBM P5)
DB : Oracle 10g (10.2.0.1)
Achyot

Please let me know if can skip the DDL at which it is failing.
ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Use EXECUTE DBMS_LOGSTDBY.SKIP
ALTER DATABASE START LOGICAL STANDBY APPLY;
Thanks,
Renu

.xml get disformatted after adding a new Element

Dear friends!
I have a xml file when i add a new element to this its formatting
get destroyrd. Plz help me to keep them in proper shape.
before adding:
<person>
<name>xyz</name>
</person>
after adding a new name element:
<person><name>xyz</name> <name>new 1</name><person>

ok, so using JAXP (which is embedded in JDK 1.4 so if you use this JDK no need to add anything on your classpath).
0. few imports
import org.w3c.dom.*;
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;1.load the XML file in a DOM:
Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse("c:/data/myxmlfile.xml");2. manipulate the DOM, see:
http://java.sun.com/webservices/docs/1.0/tutorial/doc/JAXPDOM7.html#65002
3. save the DOM:
Transformer transformer = TransformerFactory.newInstance().newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "1");
transformer.transform(new DOMSource(doc), new StreamResult(new FileOutputStream("c:/data/myxmlfile.xml")));hope it helps.

Sequence of items in 'to do' list now abritary after adding a new calender

Hi I doubt there is a fix for this but I would like to understand the problem.
I added a new calender (on the left, in a new color) and my to do list is now scrambled. The sequence of items was important, they were grouped, and now they seem to be in a random order. I'm not using priorities.
WHY?! : )
Perhaps now is a good time to switch to a competitor?
Any thoughts?
Thanks
Matt

For some reason the actual Task in the process is not being completed. If you see the same Task ID then you are probably still looking at the same actual Task because if a new Task was created, it would still get a new ID incrementing in value. What happens when you select the green check mark in the Task card in Workspace (rather than complete from the form view). If this works then perhaps there is something wrong with the submit button on your form. Also, what version of Reader are you using?

160gb classic won't sync after adding a new album to the library..'sync' lettering in devices is not highlighted

Similar Messages

Maybe you are looking for