160GB iPod Classic Won't Work Properly with speaker systems

My 120GB works fine with my iHome, and a new speaker system I just purchased... because I thought my iHome was broken, because when I used my 160GB in it, it didn't respond to "play/pause" commands with either the remote or the speaker command. When I tried the 160GB on the new system I bought, it didn't respond either. Should the 160GB work fine with those systems if they play the 120GB without a problem? I'm a bit confused on the issue.

More info would be helpful
What do you see on the iPod screen when you connect to the PC?
Which version of iTunes are you using?
What is the iPod software version as shown in iTunes summary page, the last time you connect successfully.? Or just, on the iPod, press Settings->About
     press the select button 3 times and you will get the software version.
HAVE A NICE DAY!

Similar Messages

  • 160gb ipod classic won't sync since update to 11.2.2, system wants to wipeout all current info on device

    160gb ipod classic won't sync since update to 11.2.2, system wants to wipeout all current info on device

    same has happened to me,  on and off,   for the last 6 months.   Its an issue with the Mavericks system and ipod classics.    works great for a while -  then one day for no reason - erases the entire iPod.   some days the copmputer will not recognize the iPod and you have to start over.  Apple will tell you that "you" may have a disc problem in the device.  that is all the help I have received.

  • Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

    Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

    Read A fix via Virtual XP
    http://forums.adobe.com/thread/702693?tstart=0

  • My 160gb ipod classic won't sync to itunes on a mac (I've tried everything)

    Just got a 160gb ipod classic off of craigslist. The slate grey one.
    It says "connected eject before disconnecting" on the ipod when I plug it in and nothing shows up in itunes.  Every once in a while the "sync" circulating arrows start up, then stops and goes back to the plug symbol.
    It isn't available under "devices".
    I updated itunes, I restarted my mac, I put the ipod into and out of recovery mode (while plugged into itunes and on it's own), and still nothing.
    Everything on the ipod works perfectly fine.
    One thing to note, is the ipod is completely full. It has like 3kb of free space. Could this be part of the problem? Is there any way to delete directly off the ipod not through itunes?
    Is it possible that it's formatted for windows and needs to be reformatted for mac? If so, how do I do that?
    Please help!

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • IPod Classic won't sync properly?????

    I have a 160gb iPod Classic and I'm using a 2.3 GHz Intel Core i5 Macbook Pro, Early 2011, running on Yosemite.
    So I was using my iPod the other day and it hanged so I reset it like how I normally would by holding the center and menu button but the next thing I knew, all my music was gone. I plug it into my computer and it tells me the iPod is corrupted so I have to restore and stuff, which I do, and then I try syncing all my music again (only about 4,000 songs, 30gb) and the same thing happens, my iPod tells me there are no music.
    I've tried resetting, restoring, and resyncing countless of times and I figured it was broken so I brought it to the Apple store, only to have the personnel tell me there's absolutely nothing wrong with it, and they even managed to sync the store's playlist into my iPod.
    So I bring it home again and try and try and try and it just doesn't work. It's frustrating because it takes forever to sync all my music in and then nothing shows up and it freezes a lot and I've to reset it and it takes forever to reset because it gets frozen at the Apple logo. And it doesn't always show up on my iTunes, even when I put it in Disk Mode. Ugh not sure what I'm doing wrong, there might be something wrong with my iTunes but I've managed to sync the same content into my iPhone so I'm not so sure. Plus I don't know how to troubleshoot my iTunes since there's no way for me to uninstall it on my mac. I'm using the most current iTunes.

    Hello Stevie A B,
    The article linked below provides details about this error and steps to help resolve the issue.
    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    http://support.apple.com/kb/HT1207
    Cheers,
    Allen

  • 160gb ipod classic won't display album artwork...sometimes

    I have a 160GB iPod Classic (version 2.0.4 PC), and ran into a strange problem regarding displaying album artwork. Here's what I can describe:
    --> When browsing through albums, any albums that have been added to my iPod or had their info changed since a certain time (not sure of the exact date but I believe it to be July 2013) do not display artwork.
    --> If these albums are played, one song from the album will not display artwork, but all the rest will. I can't detect any set pattern as to which song won't display artwork once I update it, but I'm sure there's some pattern.
    --> All the album artwork is displayed on Cover Flow and on iTunes, but not in these places.
    --> It doesn't matter whether I downloaded the artwork directly through iTunes (i.e. clicked "Get Album Artwork") or put in artwork from a file on my computer, this happens literally every single time.

    Probably, the easiest way to resolve this is to copy the artwork from one song on an album and paste it into every song on that album.
    In your iTunes Library, choose an album that has artwork issues; choose one track that has the artwork and copy it. Then:
    the slightly longer method is to check each song individually, until you find the one with the missing artwork. Paste (the copy previously made) from one of the other tracks on the album.
    a slightly quicker method is to highlight all the songs on that album (make sure it is just that one album) and paste the artwork into the box.
    Sync the iPod with your iTunes Library.

  • 6th Gen. 160GB iPod Classic won't mount on 10.4.11

    Hi,
    I'm desperate for a solution! Would somebody please help me!
    Here is my problem:
    I have a 6th Generation 160GB iPod Classic that will no longer mount onto my PPC G4 10.4.11.
    On this iPod I have a few thousand photos of a trip to Mexico that I kept on here until I returned home to sync them.
    The other day, I started synching them into iPhoto 6.0.6, and it was working fine for the first half, but stalled around the middle. I could not find any way to get the synching process to continue or to quit / force quit the program successfully. Force quit did not actually terminate the process/program. I know at the time it was a mistake, but I unplugged the iPod cable from the iPod and held the computer's power button until it shut off.
    Today, when plugging the iPod back into the computer:
    1) it no longer mounts (though the iPod partition is viewable (grayed out) in Disk Utility.
    2) because it does not mount in Disk Utility (I've tried many times including a separate iPod restart) it is also not viewable in Finder or in Terminal.
    3) The iPod Settings Display that it is completely empty (though I know the files are still on there).
    4) iPhoto recognized that there were more photos that still needed to be synched and asked if I wanted to continue, which I'm not able to do.
    5) iTunes 8.0.2 tells me that I need to restore my iPod (which I can't do because I need these files, and can't erase them off of the iPod).
    Does anybody know a workaround to save these files, which are extremely important to me, and cannot be erased under any circumstances? I would be extremely grateful for any help!
    Please Help Me!
    Thanks.

    deggie,
    thanks for responding.
    just to let you know, I had the same problem before (when my iPod was brand new), but the problem was just with media already in my iTunes Library, so I tried to restore a bunch of times, and that didn't work. At the time, I had Apple Care, so I brought it to a Genius to restore. When I arrived home, it still wouldn't sync, but one last restore in my iTunes, and I got it working fine again. Ridiculous!
    This time, I have already tried the iPod disk mode / Diagnostic mode, as -well-as connecting on a new user computer account (same computer), and on a different computer using a different iPod cable. All of this yielded the exact same results. The USB drive is detected (such as dev/disk2), but the iPod partition (dev/disk2s2) is grayed out in Disk Utility and is not accessible.
    The closest luck I've had so far is downloading/installing the demo of Disk Rescue II, which produced a "thorough scan" of the entire drive (one block at a time). I was able to see somewhere between half to most of my files on there, and am not sure about the remaining undetected files. The demo only let me restore a single 5MB file, but am at least assured that most of it should be able to be recovered once I pay for the full version.
    I am, however, interested to understand why some of my files were not recognizable. For example, during a class, I had a bunch of 100MB-400MB .wav files recorded with a Belkin TuneTalk Stereo Microphone that connects via the iPod Dock connector. The majority of these files I moved into a separate folder I created on the iPod as a way to organize them. Those files were either not discovered, or somehow not viewable in the Data Rescue II scan results. The last couple of files I recorded with the mic (and did not move elsewhere on the iPod) interestingly were automatically synced and playlisted in my iTunes (I did not tell it to sync), and are still playable on my iPod. Also, I may be wrong, but I don't believe all of my photos were detected by Data Rescue II. It seems like many random photos from each photo folder I created on my iPod were missing/not detected/not viewable, so at first glance it might appear like they all show up, but the file count doesn't look correct. I was expecting more files to be detected than there were. To my knowledge the Scanning between Demo version/full version should be the same, so I can only speculate until I buy the full version/restore to see which files I'm dealing with.
    I would love to hear any other thoughts/ideas/solutions.
    No doubt this iPod is getting restored (possibly at an apple store) when this is all done. From now on, I'm doing everything possible to backup on DVD's while on trips. I can't trust my iPod alone to be a dependable backup. This is unnacceptable!

  • Ipod classic won't work at all. Help!

    Today, my ipod has stopped working even after being able to use it earlier today. It will turn on only when connected to the wall charger (that is plugged in to an outlet) and won't connect to my mac. It flashes the apple symbol start up screen. I can only reset it when it's plugged into the charger and I can put it mannually into disk mode at that time too, but otherwise it won't work. Any help?

    Ok, I ran into this same issue of a brand new iPod Classic resetting itself continuously about once every 30 seconds, and you could hear the hard clicking sound, with each reset cycle. I had to do the following to get it to work ok.
    10 Simple Steps To Fix Your iPod That Is Stuck In A Continuous Reset Loop:
    1) While the iPod was resetting itself over and over (continuously resetting itself), press the Play/Pause button and the center select button simultaneously, for about 5 seconds, and it will display that it is now in disk mode.
    2) Start up iTunes on your computer and then connect the iPod to your computer with the USB cable.
    3) Click on the iPod in the left pane, select "Restore" to restore it to its original blank state. Follow the prompts to continue.
    4) When the computer completes the Restore update, and it displays a message saying that the iPod will disappear and reappear in iTunes in a minute, immediately disconnect the iPod (unplug it from your USB cable).
    5) On the iPod, you should see the main menu, in a few seconds. Pick a couple of settings to update for example the English language, and Eastern Time Zone (New York or Washington, DC), etc.
    6) Press and hold the Play/Pause button to power the iPod off.
    7) Re-connect the iPod to your comptuer with the USB cable.
    8) Start syncing using iTunes, as normal.
    9) All should be well.
    10) Remember to always click on Eject in iTunes, and waiting for visual confirmation, before disconnecting the iPod.
    The End. Whew!

  • IPod classic won't work

    When I turn on my iPod classic it has a big red x on it and it doesn't work. What can I do?
    It tells me to go to apple support but I couldn't find anything.

    So you haven't seen this article?
    iPod Displays a Red "X" Icon
    Note, that this symbol is often a sign that your iPod's Hard Disk is dying in need of a replacement. 
    Some users have been able to also resolve this issue by slapping the iPod against their thigh with a bit of force, although not too hard.
    B-rock

  • Ipod Nano won't work properly in my Car's AUX

    I had the old ipod before and somehow i lost it. So i decied to buy the new ipod nano but when i connect it to my car's aux , the music won't sound properly there is always a interference and a annoying noise.But the thing is this never happend to me on my old Ipod and it worked perfectly so what should i do please help..

    can someone respond please

  • IPod Classic won't fully sync with OS Mavericks

    I have recently upgraded my MacBook Pro OS to Mavericks. I have just plugged in my iPod to it to update contacts, calendars, etc and to my horror find that this is no longer possible. I have the same problem with my iPhone 3G - the chap in the store said that Apple has changed the sync process for data so that it can only be done via the Cloud - neither the iPod Classic or iPhone 3G can access the Cloud. This is an outrageous degradation of usability of items which are still fully functional. When will they reinstate the plug-in type of syncing for data?

    I was having this same problem and tried many things. All of a sudden it started working, I just finished syncing my whole library. The only things I've done since my last failure was, 1. Let it sit(I just left it alone for a day, I know it sounds weird, but I wonder if it had to completely shut down, not sure) 2. I downloaded an updated bonjour (I don't know what this would have to do with the iPod, but I synced right after and it worked). I'm not sure if it will work with yours, but at least they don't involve a big production. Hope it works for you.

  • Ipod Classic won't work on old Power PC G4?

    I got a 120GB Ipod Classic for Christmas from my whole family. When I tried to hook it up to my Power PC G4 Mac Mini, it told me that I needed iTunes version 8. After downloading it and attempting to it, I was informed that I needed to have OS X 10.4.11 to update to iTunes 8. I looked around and wasn't able to find any way to update to OS X 10.4.11 and wasn't sure if it was even possible with my old power PC. Are there any ways around this, or do I have to get an older Ipod? I tried adding mp3 files from my external hard drive directly to the Ipod, and while the files transferred, the never showed up on the Ipod. I'd rather not go through the hassle of selling it just to buy an older model, but if I did, would 5th gen Ipods work?

    Thank you for the help, but I would prefer a solution that does not involve me having to spend more money on an operating system I don't really need. Any other solutions?

  • My Extigy won't work properly with Wi

    I have upgraded my PC to WinXP. I have a Creative Extigy with 5. speakers, and on my old PC it all?worked perfectly. With the new computer?the 5. rear?right and left speakers won't work. The others work just fine !?There seems to be no signal coming from the Extigy when I play from Musicmatch Juke box. But if I play something throught MixMeister3 it works just fine. Any ideas what the problem is ? ... thanks ... Roger

    hey..actually i have same problem 2 days ago n yesterday my imessage finaly worked..
    in my case i use another sim card/not original bundling,then i use my original sim card/carrier, n it instanly worked..
    so actually carrier does take the problem..
    im sory my english is terrible bad,im from indonesia..thank you

  • Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

    Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
    Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
    Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
    System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
    Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
    This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
    Any thoughts?
    Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
    Ken
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

    Hey, thanks! That was fast. I'm impressed by the Mac community.
    This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
    Ken

  • My 160GB ipod classic doesn't sync properly because of silly accident - HELP pls!!

    By accident my iPod classic got disconnected in the middle of the sync process. Ever since, it can sync onlt 1GB of my 50GB music collection. Now while it syncronizes, at times it stops and reads "connected". It freezes for a while and then the -69 error pops up and also and a dialog appears that my iPod cannot be accessed. Below is what the Diagnosys mode shows. Do you think it is too screwed up??
    Thank you!!

    Yes have it replaced, You Realloc numbers are too high, it will keep increasing, as the Hardisk start and stop trying to locate some good sectors to write data.
    Most likely your iPod  battery drained out fast too.
    If it is under warranty, bring it in to APPLE store for a replacement.
    Have a nice day!

Maybe you are looking for

  • Filter values not showing on iPad

    Hi, I have a BW query based universe (UNV) that is published to iPad. The WebI report runs fine in BI Launchpad. However, when I open same report on iPad, the prompt values are not show (I see only blank Blank Blank) and report is not executed. BW se

  • After 10.8.2 update i can no longer wake my macbook from standby with keyboard when the lid is closed

    I just updated to 10.8.2 and now i can no longer wake my macbook froom standby when the lid is closed, it directly goes back to sleep steps to reproduce: 1. attach secondary monitor and keyboard 2. close lid 3. wait 5 seconds for going to standby 4.

  • Hard Drive Failure on Rev 1 Macbook Air. What are my options?

    My HD on my Macbook Air (Rev 1) 1.6 ghz 80 gb pata HD has failed. so I am going to have to take to it an Apple Service provider to fix. My question is what options do I have, I.e. Could I upgrade disk size, put in an SSD drive instead or is my only v

  • Add field from structure maintanace option for datasource in LBWE (BI 7)

    Hi, while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes th

  • Library cannot be saved

    I receive the message "The iTunes library cannot be saved. An unknown error occured (-50)" while watching a video podcast. Once I get this message, I usually lose my video as the podcast continues to play. iTunes usually will crash and I need to rest