(1611) error code and unable to restore Ipad 2

I have attempted to load OS 5 to my Ipad 2. It tells me to resore but when i start that process I first get a"USB not recognized" from my computer and then I will get an error of Ipad could not be restored (1611) error code.

Resolve iOS update and restore errors
iPhone could not be restored. An unknown error occurred (36)?
iphone restore error 36

Similar Messages

How do I fix a 1611 error code when trying to restore my ipod?

How do I fix a 1611 error code when trying to restore my ipod touch?

Click here and follow the instructions.
(120576)

Error Code (-1) Can't Restore iPad

Tried updating to the latest OS. It failed and itunes says iPad needs to be restored. Tried restoring and get error code (-1). tried restoring again. It goes through the restore process, completes, then says it needs to be restored (as if that's not what I just did). So I try again and get error code (-1)
I have:
Restarted the pc
Restarted the ipad
Hard reset
Uninstalled and reinstalled the latest itunes
Tried all the different usb ports
Created a new user for the pc
none of which works... still getting the same error or it just finishes and states that it needs to be restored
This is a freshly unboxed iPad 32GB wifi (original ipad) that was given as a replacement for another non functioning ipad
called customer service (the guy was patient and very friendly by the way) but they were unable to find any info on an error code (-1).
Has anyone else received this error code or heard of it? anyone know a cause or a fix?

If you can't update or restore your iPad: Press and hold down the home button for five (5) seconds, then (without letting go of the home button) hold on to the sleep button until the apple sign shows up on your screen, and finally (still holding on to the home button) let go of the sleep button, and in a few seconds the image with a USB cable and the iTunes logo should appear.
This process puts your iPad into DUI mode which means that it has been un-bricked and should work properly once you put it into iTunes. Keep in mind though: it won't start up untill you plug it into your computer, let it start up, and sync it to get everything you need.
Best of luck!
Note: If your iPad, iPhone, or iPod Touch ever crash and refuse to work; you can do this process at any time to get it going again. If you're running iOS 5 you don't need to connect it to a computer at all, just configure your device like you did when you installed the software for the first time.
Message was edited by: K1ngc00l

Error 4005 and itunes wont restore ipad

I was opdating ipad 2 to ios 8. Ipad now has gone into restore mode and shows that it needs connecting to itunes.
Itunes will not recognise that the ipad is connected. So it can't be restored. Help please?

Look at 2nd link for error message descriptions.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Unable to restore Ipad. Unknown error occured (8)

Tried to install 7.1.2 upgrade on Ipad. Upgrade would not complete. Ipad would shut down frequently while trying to use after failed upgrade. Connected it to ITunes where it tried to install upgrade. After several attempts message stated I would have to restore. While trying to restore it fails once it gets to verifying firmware. Error message is "Unable to restore Ipad. Unknown error occurred (8). I've already made sure all updates on PC are complete. Shut down and restarted both Ipad and PC. Even called Apple Support where I was instructed to uninstall ITunes and components. Tried to restore again with same problem.

For unknown error -50
Disconnect the iPad from your Mac.
Open the Finder.
From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Preferences/SystemConfiguration/Networkinterfaces.plist
Click Go then move the Networkinterfaces.plist file to the Trash.
Restart your Mac. Connect the iPad then launch iTunes.

1611 error when updating, can't restore

When updating to the new "iCloud" version of software I got the 1611 error code and have been unable to restore my iPod Touch. I've tried uninstalling all Apple software from my computer and reinstalling iTunes, but that did not work. What is the solution?

I have almost the exact same issue, I really hope someone finds the solution.

When i try to restore my ipad min it says unknowna error 14 and i cant restore it

When i try to restore my ipad min it says unknowna error 14 and i cant restore it

Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

HT201263 unable to restore ipad 1e code

unable to restore ipad 1e code

3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Replacement iPad 4th generation WIFI/3G saying no SIM CARD and unable to restore previous settings

Replacement iPad 4th generation WIFI/3G saying no SIM CARD and unable to restore previous settings

Hi Inez2317,
Thank you for participating in the Apple Support Communities.
It sounds like you see a "No SIM" message on your iPad. You can find some troubleshooting steps that can help at this link:
If you see 'No SIM' alert on iPhone - Apple Support
Although the article references the iPhone, most of the steps can help troubleshoot an iPad as well.
All the best,
Jeremy

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

TS3694 what is error code 1015 trying to restore but keeps coming up with this code

what is error code 1015 trying to restore phone keeps saying in recovery but keeps coming up with this error code help please

Are you trying to downgrade your iPhone?
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
(from iTunes: Specific update-and-restore error messages and advanced troubleshooting)
If not, try to move or delete the IPSW file and let iTunes download it again.
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your device. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.
Windows XP
iPhone
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
Note: To quickly access the Application Data folder, click Start, and then choose Run. Type %appdata% and click OK.
Windows 7 and Vista
iPhone
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
Note: To quickly access the AppData folder, click Start, and then in the search bar type %appdata% and press the Return key.

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

ORA-00600: internal error code, arguments: [unable to load XDB library]

hi everybody ;
i have 9.2.0.7 db runs on SLES9 on host A. and i take full rman database backup to make a new database on different host ( host B ) with different file structure. ( sid is the same ) i had already 1 database on host B. after this duplicate now there are 2 database on host B.
i take daily full database rman backup on the new host for my new database and there is no problem. when i try to take extra full export backup i get an error ;
Dynamic link error: libxdb.so: cannot open shared object file: No such file or directory
*** 2010-08-05 09:46:12.868
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
as i search ; i have to stop the database and listener and set the LD_LIBRARY_PATH variable. how can i make this without make any mistake for the first database runs on Host B.
because 2 database must be up and running on host B. can you explaın these operation step by step ?
thank you ....

craft wrote:
any idea ?
>any idea ?
your database is out off support you should consider to upgrade. ORA-00600 indicate for bug

Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)

We are on Exchange 2007
We have one database that will not mount. Whenever we try to mount we get the below error
Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
Initiating FILE DUMP mode...
         Database: SG3-DB.edb
        File Type: Database
   Format ulMagic: 0x89abcdef
   Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
     DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
         cbDbPage: 8192
           dbtime: 3942751903 (0xeb019e9f)
            State: Clean Shutdown
     Log Required: 0-0 (0x0-0x0)
    Log Committed: 0-0 (0x0-0x0)
   Streaming File: No
         Shadowed: Yes
       Last Objid: 877765
     Scrub Dbtime: 0 (0x0)
       Scrub Date: 00/00/1900 00:00:00
Please help us on how to clear this error and mount the database.

We are on Exchange 2007
We have one database that will not mount. Whenever we try to mount we get the below error
Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
Initiating FILE DUMP mode...
         Database: SG3-DB.edb
        File Type: Database
   Format ulMagic: 0x89abcdef
   Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
     DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
         cbDbPage: 8192
           dbtime: 3942751903 (0xeb019e9f)
            State: Clean Shutdown
     Log Required: 0-0 (0x0-0x0)
    Log Committed: 0-0 (0x0-0x0)
   Streaming File: No
         Shadowed: Yes
       Last Objid: 877765
     Scrub Dbtime: 0 (0x0)
       Scrub Date: 00/00/1900 00:00:00
Please help us on how to clear this error and mount the database.

(1611) error code and unable to restore Ipad 2

Similar Messages

Maybe you are looking for