1650 x 1080, will be fine for Color?

Ive heard Color can hog up screen real estate. Will a 22inch 1650 x 1080, you think with be useusable without having to strain to see the smaller menus?

Color-Specific Requirements (from the FCS2 Technical Specifications)
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad.
For 32-bit rendering: a graphics card with at least 256MB of VRAM.
*A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.*
A three-button mouse for full functionality
x

Similar Messages

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it!, Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it!

Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it! Does it at home and work so not either broadband connection

jp270759 wrote:
Hi. MAny thanks for the answer. Am new to Apple - what's the "real" MacBook Pro forum?
I would like to know also!
For your issue - Solution may be found if you search in the "More Like This" section over in the right column.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

I am a new mac user and have a 15 macbook pro (non retina display). I am having an issue with safari "freezing" ...it will work fine for a while and then I will open a new tab and attempt a website that won't load and after that it seems no website will.

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

After the update my earbuds will not work for my music BUT will work fine for phone conversations

After the update my earbud will not work for music BUT will work for phone conversations

this might sound dumb but how do i do that because that is probably the problem

TS1741 Does anyone have trouble with the Remote app losing contact with the iTunes library after it has been connected and working fine for a while. If I go to the computer and turn off sharing, then turn it back on, it will relocate the library again.

My iTunes remote app on my ipad mini will work fine for a while and then it will lose the library. I then have to turn off sharing on the computer and then turn it back on. This will work for a while and then I will have to repeat the process. Help!

I have just found the problem to be windows firewall on my library PC
I can only presume there has been an update to windows firewall or iTunes
all the relevant programs were on the allowed list
I'm now currently running with firewall turned off on my library PC.
I'll update when i have found the rogue setting.

SG500 POE issue on one port, worked fine for over a year!

Hello,
I have 2 SG500 52 port switches in a stack. One is non-POE and the other is POE. I use the POE switches primarily to drive our Yealink T22P and T46G phones. They have worked flawlessly for about a year.
This weekend I updated the firmware and boot for the switches to the latest release.
SG500#sh ver
Unit SW version Boot version HW version
1 1.4.0.88 1.4.0.02 V02
2 1.4.0.88 1.4.0.02 V02
Now all of a sudden a port that is being used to power one of the phones isn't working correctly, and the behavior is VERY odd (I will explain in a second). I have 20+ phones on this same POE switch that have no issues. I'm WELL under power budget since each phone draws about 2.5W.
Any phone that is plugged into this bad port at first looks like it works fine. It is in the right VLAN, auto smartport correctly identifies it, LLDAP-MED works as it should. The phone looks to be operational. It even might work fine for a while. But eventually when making a call the light in the screen starts flickering like crazy and you get a "static" sound on both ends of a call. It sounds like electrical interference. I can make a call and it will be fine for 1 minute and the next it starts doing this. It is NOT the phone. The same phone in a different switch port does not do this (in fact 20 others phones on different ports don't do it). ANY phone in this port shows this behavior.
The port in question (port 36), is showing Local POE as 0 Watts, Remote POE 2.9W (in Administration -> Discovery-LLDP -> LLDP Port Status). All other phones show Local POE as something like 2.5W. All settings on this port (36) are exactly the same as the rest of the ports on the switch that work fine with the EXACT same phones. I know it is the port on the switch that is causing the issue as well because I was able to isolate it. I tested the phone by plugging the phone that appears to be bad into a different wall outlet. I tested the wall outlet by switching the cables from the patch panel to the switch ports. I changed the patch cables as well. It is the switch port for a fact.
I did some searching and found some similar info related to the SG300. So I ran some of those commands and found some more info.
SG500#show power inline gi2/1/36
Port Powered Device State Status Priority Class
gi2/1/36 Auto Searching low class4
Time range:
Power limit: 30.0 W
Inrush Test: Enable
Legacy Mode: Enable
Port Status: Port is off - detection is in process
Overload Counter: 0
Short Counter: 0
Denied Counter: 2
Absent Counter: 0
Invalid Signature Counter: 1
Notice the port status (it shows this all the time) and the Class.
This is compared to the same phone in a different port showing this;
SG500#show power inline gi2/1/22
Port Powered Device State Status Priority Class
gi2/1/22 Auto On low class2
Time range:
Power limit: 30.0 W
Inrush Test: Enable
Legacy Mode: Enable
Port Status: Port is on - valid capacitor/resistor detected
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 5
Invalid Signature Counter: 0
I am afraid to make any changes across all ports on the switch since they are working fine. So I am trying to make changes on just port 36 of this switch. I tried turning off EEE settings, didn't help. Tried turning off the VLAN and auto smartport settings, didn't help.
Is the port busted (if so I'm pretty upset with the purchase of this switch)? Is it something caused by the latest firmware?
In 15 years I haven't had a single faulty piece of hardware. If this is I sure hope Cisco is easy to deal with.

More info to help diagnose:
SG500#show power inline
Port based power-limit mode
Inrush Test: Enable
Legacy Mode: Enable
Unit Power Nominal Power Consumed Power 2 On 375 Watts 68 Watts (18%) Port Powered Device State gi2/1/1 Auto gi2/1/2 Auto gi2/1/3 Auto gi2/1/4 Auto gi2/1/5 Auto gi2/1/6 Auto gi2/1/7 Auto gi2/1/8 Auto gi2/1/9 Auto gi2/1/10 Auto gi2/1/11 Auto gi2/1/12 Auto gi2/1/13 Auto gi2/1/14 Auto gi2/1/15 Auto gi2/1/16 Auto gi2/1/17 Auto gi2/1/18 Auto gi2/1/19 Auto gi2/1/20 Auto gi2/1/21 Auto gi2/1/22 Auto gi2/1/23 Auto gi2/1/24 Auto gi2/1/25 Auto gi2/1/26 Auto gi2/1/27 Auto gi2/1/28 Auto gi2/1/29 Auto gi2/1/30 Auto gi2/1/31 Auto gi2/1/32 Auto gi2/1/33 Auto gi2/1/34 Auto gi2/1/35 Auto gi2/1/36 Auto gi2/1/37 Auto gi2/1/38 Auto gi2/1/39 Auto gi2/1/40 Auto gi2/1/41 Auto gi2/1/42 Auto gi2/1/43 Auto gi2/1/44 Auto gi2/1/45 Auto gi2/1/46 Auto gi2/1/47 Auto gi2/1/48 Auto Usage Threshold Traps Temp (C)
95 Disable 39
Status Priority Class
Searching low class4
On low class2
On low class2
On low class2
On low class2
On low class2
On low class3
Searching low class4
On low class2
On low class2
On low class0
Searching low class4
Searching low class4
Searching low class4
Searching low class4
On low class2
Searching low class4
On low class2
On low class2
On low class2
On low class0
On low class2
On low class2
Searching low class4
On low class0
On low class2
Searching low class4
Searching low class4
Searching low class4
Searching low class4
On low class2
On low class2
On low class2
On low class2
On low class2
Searching low class4
On low class2
Searching low class4
Searching low class4
Searching low class4
Searching low class4
Searching low class4
Searching low class4
Searching low class4
On low class0
On low class0
Searching low class4
Searching low class4

When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself.

I have had a problem with my iphone 4s for some time now but I have just been so busy to try and fix it. When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself. However, even though it says the data is on, I can’t use the data when I don’t have wifi. I tried restoring my phone a few times and the last time I did that, it wouldn’t turn my service on so I had to talk with a Verizon agent for a long time trying to fix it and finally they simply sent me another phone. I thought hey new phone, this part will be fixed. However, I got my service to work but it’s still the same problem with the cellular data. I have just left it alone and not worried about it, but it’s still not fixed and thought I could ask on here if anyone had any ideas. It has something to do with the apps actually installed on the iphone. Apps like the mail, safari, settings, itunes apps, etc. All my other apps turn on and off just fine. Does anyone have any ideas?

Read the User's Guide... it covers how to backup and sync the device as designed.

I loaded mozilla 6 on my new laptop. it was working fine for a few weeks, but now will not launch at all. how to fix??

I loaded mozilla 6 on my hp laptop and it was working fine for a few weeks, but now it will not launch at all wheather I clip on the icon or type in the site. there is no message or warning, it just does not start up. I am a long time firefox user.

Hi Gamon,
Do you see any error message on your screen when you open up Acrobat? What happens when you open Acrobat?
Regards,
Rahul

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated i think it has somthing to do with the battery but im not sure because it still turns on. Im for sure that its the ipod and not the cord or outlet and charger. somone please help!!!!!! I tried everything besides opening it up.
I dont know what to do???????

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium

OK... so now I can pin a tab so it will always be there... so what the heck happen to all my tabs that were pinned? Worked fine for awhile so now what...???????

OK... so now I can pin a tab so it will always be there... so what the heck happen to all my tabs that were pinned? Worked fine for awhile so now what...???????

App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
It is also possible to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
If you use cleanup software like CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it?

I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it? OS 10.8.3, Safari 6.0.4

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

HT5642 Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Tried to reset network settings ...only fixes it for 15min. Did a firmware restore and a clean new phone setup. no settings restore. still have network service after around 60min. still running 6.1. i do get a prompt that i have to update settings to LTE. Have not excepted the settings as yet. Cellular data is still set to 3G....

My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

1650 x 1080, will be fine for Color?

Similar Messages

Maybe you are looking for