1661 shows Test Mode on a dark screen?

My 1661 got wet and now when I power it on the screen remains dark but with a barely visible "Test Mode" showing on it.
Pressing keys does nothing.
If I remove the battery and then replace it and press the power button, the Test Mode message reappears.
Is there anything I can do or is this phone trashed?
Thanks...

Visit a Nokia Care center. Really strange that the test mode appeared there :/
Normally test mode can be removed by removing the battery and re-inserting, but as you've tried it already. There seems to be something else wrong with the phone.
Dry the phone completely under a light bulb or dump it into rice for a while. And try turning it on after it has fully dried.

Similar Messages

HT3215 How do you keep the clock face showing all the time without the screen going dark?

How do you keep the clock face showing all the time without the screen going dark?

Thanks. I saw a number of answers to the same basic question after I posted my question and apparently there are ways to to keep it on but, as you said, it will drain the battery quickly.

TS2771 my ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, became a dark screen, what can I do? I love this ipod very much as it's a present from my

My ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, it showed fully charge, but after I pressed, it became a dark screen, but it shows a dark apple everytime I connect the Mac, what can I do? I will try my best to save it, I love this ipod very much as it's a present from my dear.

After drying for a month and it's still not working, it's almost certainly suffered hardware damage and will need to be replaced. You can learn what Apple will charge to replace it here:
http://www.apple.com/support/ipod/service/faq/
BTW, you posted originally in the iPod touch forum. It's best if you post in the forum specifically for your product; you'll get the most applicable responses that way.
Regards.

S10 screen stuck on "factory test" mode after replacing ribbon

After replacing the LCD ribbon on my S10 netbook (with one the exact same) it seems to be stuck on some "factory test" mode. It flickers between solid red, green, and blue and also some gradients and other patterns.
I'm still able to use my netbook using an external monitor.
I don't want to use OneKey because 1) I'm not certain it'd fix it + 2) there's a broken ext3 partition that I need to recover files from. If it's the only way to do a reset (don't know) then so be it.
Thanks for any help!

I should mention that when I boot to Windows XP and select "Notebook" from the graphics output options, the notebook screen goes back to displaying the test patterns. Otherwise it's off when the external monitor is plugged in.

SPAM in test mode does not show modified objects

I am running SPAM in test mode, and I need to see the objects that have been modified with the modification assistant that are in the patch... how can I see that?
when I run SPAM in test mode, during the step step RUN_SPAU_? I can see only the number of the objects modified, not the actual object names.

Run SPAU seperately, are there too many objects that have been modified ?
Regards,
Siddhesh

My iphone 5 suddenly wont fully boot...it stuck on the apple logo and goes of after 20 -25 secs and comes on by itself after a minute or two but still stuck on apple logo..also i am able to see a bit of lighting on the dark screen whenever it goes of

my iphone 5 on the ios 7.1.2 suddenly wont fully turn on...it gets stuck on the apple logo and stays like that for approximately to 90 secs then goes blank but I can see a bit of lighting behind the dark screen....it goes off by itself and comes on by itself trying to boot but still gets stuck on the apple logo after the dim light shows....when I connect to iTunes my phone can only be recognised only in recovery mode thus if I force it into recovery mode. My main worry is I don't have a back up of any of my data...on icloud I have just less than 2GB of my data which is as a result of incomplete back up...HOW CAN I GET THIS PHONE WORKING AGAIN WITHOUT LOSING MY DATA...if I can only just recover my data I would really appreciate it as I really need almost everything on it back...if I can only get retrieve my data and lose the phone I wouldn't mind at all....Anybody know how to resolve this??Kind Regards

Anyone have any suggestions? or is everyone else just as clueless as me !

E70 Update ends in Test mode?

I am trying to update my E70. The updater installed fine. It runs fine. It recognizes my phone. Downloads the firmware. Then it starts updating the phone.
After a while nsl_host_process.exe quits. On one computer I have Dr. Watson. On another one it silently quits. Still the updater gui shows the same "Updating software, please wait...". The phone itself shows:
APE_TEST_SERVER,w43_05,(c)NMP
Test
mode
Nokia
Nokia
And that's it. The phone does not react to any keys. Nothing else is happening anymore. I have read the update can take up to 20 minutes but I have been patiently waiting for 1 hour now.
What should I do now? Can I simply unplug the phone? Or can I expect the updater to figure out eventually that somethings gone wrong?

18-Dec-200604:27 PM
zayebysty_mis wrote:
the same is with E61, test mode and nothig.
Today was relesed new NSU(1.2.20) with (i think, because i dont have this error) nsl_host_process.exe error fixed, but upgrade still ends on test mode...
I faced the same problem while updating my nokia 6300!!!!
my phone screen now reads "test mode" and it shows no reaction to any key strokes. It seems I have no choice but to remove the battery. I don't know what to do????!!!!!!

Test mode (5330 mobile TV edition)

Hello, Please I need help.
When I switched on my nokia 5330 mobile TV edition on, what I see on the screen is test mode. And anytime it comes up, it will stay on for some minutes and go off again. Sometimes it will show low battery on the screen. But I have tested the battery in another nokia 5330 and is working perfectly.
Anybody that might be of help should please assist.
Thanks

Unfortunately NO.
http://europe.nokia.com/find-products/devices/nokia-5330-mobile-tv-edition/specifications
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Want to hide or mod FCP 6 Splash Screen

Just want to hide the splash screen on my FCP system. I rent it to indy projects and I want to protect my serial. How can I access the Splash Screen Image? I've been able to mod the splash screen on all the other apps on the rental system but can not find or get to the Splash Screen for Color and FCP 6. I know that a real hacker can find my serial some how but I am not trying to block those geniuses. Just the lazy ones that are willing to go as far as copying or screen grabbing my Splash Screen and or About Screens to get a working serial. I know how to mod the Splash Screen to hide my serial and how to hide the app so the user can't get to the splash screen. I just don't know where the splash screen file is. I've read that it is in the .nib files? I just wanna hide my serial. Don't care if I mod it myself or install an app that does it for me. Any apple people or anyone else know what I can do to protect my product. I've also been told that the splash screen does not display the full serial but it soo totally does. Hey apple, please add the ability to hide this splash screen. Perhaps with it's own password to unlock and show again? OR, make splash screen hiding a universal ability in the OS. That would be sweet! Anyway,... ideas?

Hey all. I have been able to mod the splash screen on all the apps in FCP Studio 2 except for FCP and Color. The other studio apps Splash Screens access a .psd file. The only files I've found in Color that seem like they might be the splash screen files are ft_splash.Isi, ft_splashEDU.Isi, ft_splashNFR.Isi and ft_splashVOL.Isi
How do I open a .Isi file? If I can figure that out I can hide the serial number for Color but it still leaves FCP. Why do apps show the serial on the splash screen at all? What purpose does this serve?

Sold to party showing editble mode in sales contract

Hi all,
I created a sales contract and followed by sales order, delivery billing the movement i am checking sales contract SOLD TO Party its showing editable mode in contract over view screen and i check in header partners it showing sold to party in gray mode , i maintain relevant configuration ( partner determination i mark as a SP not editable and mandatory function in sales document header and procedure KAB release order in that i assign SP sold to party with not editable and mandatory function
still its showing editable mode in sales contract
Same Config is working fine for Sales order, once subsequent document is created sold changing into gray mode
why same confg is not working for Sales contract
can any one guide me where i am wrong
Thanks
Rajesh

hi
goto
img>sales and distribution>basic function>partner deternination>Set Up Partner Determination for Sales Document Header-->
partner determination procedure
partner determination procedure assignment(assign sales document and partner determination)
partner functions
account group-function
regards
senya
Edited by: senya_1111 on Sep 7, 2009 4:00 PM

IMac won't boot, dark screen after normal grey start up screen

Quite perplexed with this problem, have tried everything I can think of.
Computer: iMac 2.16 gHz 24" mid 2006, 4 gig RAM
OS: 10.6.8
Froze and required hard shutdown. Subsequent to this, has behaved consistently:
Normal grey screen with Apple logo and spinning timer, can hear disk activity. Then the screen goes dark and nothing else happens (although the computer is still on). Have to perform hard shutdown.
Have tried:
1. Booting into single user mode (multiple times) and performed fsck, no errors noted
2. after using 'exit' command in single user mode, computer attempts to reboot but then freezes after noting 'panic'
3. Reset PRAM (no change)
4. Tried safe mode boot, progress bar on grey screen progresses, then spinning timers comes on, then same crash with dark screen
4. Disassembled computer, removed hard drive, mounted normally in external SATA enclosure. I backed up critical data, ran Disk Utility Repair, no errors noted.
5. Reinstalled HD, reassembled computer, rebooted, same issue
6. Attmepted to boot with Snow Leopard Install disc to perform a fresh Achive and Install - after prolonged grey screen with spinning timer and audible DVD drive access, same switch to dark screen and no further progress
7. Same panic message and stalled boot attempt noted when booting into single user mod
I'm stumped. My assumption is that there is a courrpt file that is causing a kernel panic during boot and I assumed that I'd be able to perform an archive and install but when this failed I'm guessing all I can do is replace the hard drive with a new one and then go through the hassle of transferring all the data over manually.
I would welcome hearing any other observations, similar experiences or other ideas. MTIA.

One update ... when I boot the computer and get the 'dark screen', I hear disc activity. So I started hitting the return key and I get the chime with each return as if I'm on the log in screen and hitting the return to log in without entering any text.
That would argue there is a problem with the screen.
However, it does not explain why the computer display works normally during single user mode and hangs (without the screen going dark) when trying to reboot from this mode.

I have an Imac. When I click to open google maps a permeable but dark screen covers my monitor screen and I get a note that tells me to shut down the computer and restart it. This hasn't helped. Everything else seems to work fine.

When I attempt to open google maps in Firefox on my Imac, a dark screens descends over my monitor screen and a note tells me there's been an error, no number is noted, and that I need to turn off and restart my computer. This doesn't help, but everything else works, including google maps in other browsers.

This is a kernel panic.
First verify that Firefox is fully updated including all extensions.
If this fails to fix....
Restart in Safe Boot mode then open Firefox.
* shutdown
* start the Mac and *wait* for the startup chime to sound
* after the sound, press and hold down the shift key
* keep holding and *wait* until the grey  Apple logo appears
* now release the shift key and just wait (it could take a few minutes)
* eventually the login screen appears with the words SAFE BOOT
* login and open Firefox.
If you continue to have problems see this article for more options to fix.
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html

AFAB program strange performance in TEST mode

Hi colleagues,
We are experiencing a strange performance in AFAB program.
We have uploaded several assets in a particular company code. When executing AFAB transaction in TEST mode, the new assets are not considered, whereas, when performing a REAL execution yes they are.
We think that when reconciliating assets at the end of the year, this issue which is not harmful (but strange indeed) may be solved, but we are not sure at all.
Can anybody provide a clue on what is happening.
Thanks and my best regards

Hi When you run this report online in test it will only show +/- the first 1.000 assets and the new asset are later in the data base and you don't see them.
You have to run it in test mode in back ground and look in the spool to the result (default the spool shows arround 20 page's but this you can change or go to the next 20 pages)

WDA - Application in Test Mode is displayed in Disabled mode

Hi,
I have developed a component in SE80 and created an Application. Now if I run the same component in Test mode, It is displaying the page and elements(Ex: Input Fields & Buttons) in Non-Editable mode. Is there any setting for the same. Please help me in this case.
Thanks.
Sekhar.J

In version 10.7.4 the screen background of the fullscreen is the same login background. I like. I used the Loginox 1.0.6b5.

Run in test mode call transaction

I have written a bdc program using call transaction method. I am giving the option in the
selection screen like run in test mode.so i want to display the error mess
without actually updating the tables,
if there is a way to do this
please tell me how to run in test mode.
thank you so much for all the replies.

have written a bdc program using call transaction method. I am giving the option in the
selection screen like run in test mode.so i want to display the error mess
without actually updating the tables,
if there is a way to do this
please tell me how to run in test mode.
thank you so much for all the replies.
Hi
it is not possible, once u run call tranation the data is updated in table.
for ur requirement, put the option in test mode in selection screen, in this mode flat file data check with master data (flat file validations
) , if any errors it disaly errors in a report.
i provide some code, this is for fb60 check this code
      FORM validate                                                 *
FORM validate.
delete t_record index 1.
loop at t_record.
    delete t_record where accnt = ' '.
    translate t_record-bukrs to upper case.
    translate t_record-accnt to upper case.
    translate t_record-waers to upper case.
    translate t_record-xblnr to upper case.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-accnt
         IMPORTING
              OUTPUT = t_record-accnt.
    move-corresponding t_record to n_record.
    append n_record.
    clear n_record.
endloop.
loop at t_record.
    clear flag.
    delete t_record where accnt = ' '.
vendor and company code checking.
    translate t_record-accnt to upper case.
    translate t_record-bukrs to upper case.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-accnt
         IMPORTING
              OUTPUT = t_record-accnt.
    select single * from lfb1 where bukrs = t_record-bukrs
                                  and lifnr = t_record-accnt.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
      error_record-text1 = 'The Vendor not Under this company Code'.
    endif.
With holding liability.
    select single * from lfbw where bukrs = t_record-bukrs
                                    and lifnr = t_record-accnt
                                  and WT_SUBJCT = 'X'.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
error_record-text2 = 'The Vendor doesnt have Withholding Tax Liability'.
    endif.
G/L account check with company code*
    select single * from skb1 where bukrs = t_record-bukrs
                                  and saknr = t_record-hkont.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
    error_record-text3 = 'The G/L acc not under the given company code'.
    endif.
*cost centre checking
this FM for leading zeros
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-kostl
         IMPORTING
              OUTPUT = v_kostl.
select single kostl from csks into v_kostl where bukrs = t_record-bukrs
                                         and kostl = v_kostl.
    if sy-subrc <> 0.
      flag = 'X'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
error_record-text4 = 'The costcentre not under the given company code'.
    endif.
it check the invioce alredy posted or not.
    translate t_record-waers to upper case.
    translate t_record-xblnr to upper case.
select single belnr into v_belnr1 from bsip where bukrs = t_record-bukrs
                                          and   lifnr = t_record-accnt
                                          and   waers = t_record-waers
                                              and   bldat = p_invdat
                                          and   xblnr = t_record-xblnr.
    if sy-subrc = 0.
      day   = p_invdat+6(2).
      month = p_invdat+4(2).
      year = p_invdat+0(4).
      concatenate day month year into date1 SEPARATED BY '.'.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
concatenate 'This document under number' v_belnr1 'already posted on '
      date1 into fld2 separated by space.
      error_record-text5 = fld2.
      flag = 'X'.
    endif.
*zero balance
    on change of t_record-accnt or t_record-xblnr.
      amount = 0.
      totalamount = 0.
      amount = t_record-wrbtr1.
      loop at n_record where bukrs = t_record-bukrs
                           and accnt = t_record-accnt
                           and xblnr = t_record-xblnr
                           and wrbtr1 = t_record-wrbtr1
                           and waers = t_record-waers.
        totalamount = totalamount + n_record-wrbtr2.
      endloop.
    endon.
    if amount ne totalamount.
      error_record-rowno = sy-tabix + 1.
      move-corresponding t_record to error_record.
      error_record-text6 = 'Posting only possible with zero balance'.
      flag = 'X'.
    endif.
    if flag = 'X'.
      error_record-flag = 'X'.
      append error_record.
    endif.
    if flag <> 'X'.
      move-corresponding t_record to f_record.
      append f_record.
    endif.
    clear f_record.
    clear error_record.
endloop.
endform.
*& Form Table Control
FORM head_item .
clear t_record.
LOOP AT t_record.
    delete t_record where accnt = ' '.
    translate t_record-bukrs to upper case.
    translate t_record-accnt to upper case.
    translate t_record-waers to upper case.
    translate t_record-xblnr to upper case.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_record-accnt
         IMPORTING
              OUTPUT = t_record-accnt.
    on change of t_record-accnt or t_record-xblnr or t_record-wrbtr1.
      MOVE-CORRESPONDING t_record TO t_head.
      APPEND t_head.
    endon.
    MOVE-CORRESPONDING t_record TO t_item.
    APPEND t_item.
    clear : t_item,t_head.
ENDLOOP.
ENDFORM.
form disperrortestrun.
loop at error_record.
    format color 2 intensified on.
    set left scroll-boundary column 70.
    write :   /'|',
             (6) error_record-rowno,         '|' no-gap,
             (14) error_record-bukrs,        '|' no-gap,
             (12) error_record-accnt,        '|' no-gap,
             (16) error_record-xblnr,        '|' no-gap,
             (16) error_record-wrbtr1,       '|' no-gap,
             (8) error_record-waers,        '|' no-gap,
             (13) error_record-secco,        '|' no-gap,
             (20) error_record-sgtxt,        '|' no-gap,
             (14) error_record-hkont,        '|' no-gap,
             (15) error_record-wrbtr2,       '|' no-gap,
             (10) error_record-mwskz,        '|' no-gap,
             (20) error_record-gsber,        '|' no-gap,
             (12) error_record-kostl,        '|' no-gap,
             (5) error_record-flag,         '|' no-gap,
             (50) error_record-text1,        '|' no-gap,
             (53) error_record-text2,        '|' no-gap,
             (50) error_record-text3,        '|' no-gap,
             (50) error_record-text4,        '|' no-gap,
             (67) error_record-text5,        '|' no-gap,
             (45) error_record-text6,        '|' .
endloop.
uline at /1(538).
format color off.
endform.
Report Header for Test Run                                          *
form header.
set left scroll-boundary column 70.
format color 5 .
write: 'REPORT :', sy-repid,
38 'ERROR RECORDS DETAILS OF TEST RUN OF FB60(VENDOR INVIOCE POSTING)'
,123 'DATE :', sy-datum .
format color off.
skip 3.
format color 1 intensified on.
uline at 1(538).
write : /'|',
          (6) 'Row No',                             '|' no-gap,
         (14) 'Company Code',                       '|' no-gap,
         (12) 'Vendor No',                          '|' no-gap,
         (16) 'Reference',                          '|' no-gap,
         (16) 'Invioce Amount',                     '|' no-gap,
         (8) 'Currency',                            '|' no-gap,
         (13) 'Section Code',                       '|' no-gap,
         (20) 'text',                               '|' no-gap,
         (14) 'G/L Account',                        '|' no-gap,
         (15) 'Item Amount',                        '|' no-gap,
         (10) 'Tax Code',                           '|' no-gap,
         (20) 'Business Area',                      '|' no-gap,
         (12) 'Cost Centre',                        '|' no-gap,
         (5) 'Error record Status',                '|' no-gap,
         (50) 'Company Code/Vendor',                '|' no-gap,
         (53) 'Vendor/With holding tax Liability', '|' no-gap,
         (50) 'Company Code/ G/L Account',          '|' no-gap,
         (50) 'Company Code / Cost Centre',         '|' no-gap,
         (67) 'Invioce Status',                     '|' no-gap,
         (45) 'Invalid Balance',
        '|'.
uline at /1(538).
format color off.
endform.
thanks
sitaram.

1661 shows Test Mode on a dark screen?

Similar Messages

Maybe you are looking for