16bit Tiff & PSD previews in Bridge not showing correctly

Large multi layered Tiff, PSD and PSB files which have alpha channels, masks and layers, etc. do not show appropriate previews in Bridge (nor Windows for that matter). Many of these are very large 2-4GB, but even a typical 30-60MB file with certain alpha channels and masks are also problematic with previews. I believe the problem appears mostly when the base images ar 16bit since the 8bit version exhibit properly most of the time.
Is this an issue which has a remedy?
Thanks,
Doug A
Photoshop CS5, Windows 7, 64bit.

As Jeff said, this should fix the very large files, but I would recommend to post in the Bridge forum, or on http://feedback.photoshop.com if you still have trouble with 30 -60 Mb files.

Similar Messages

PS CS5 and Bridge not showing correct colors

When I open up pictures in Photoshop CS5 and view them in Bridge, I see a really washed out color and the pictures look horrible. However, when bring them up in Pictureviewer or another application I see the correct colors. In PS the mode is set to RGB color like normal. Please help!

Well, I'm not necessarily suggesting it as a permanent solution, just a workable fix to get up and working again. Which is what I've always done - anything's better than those useless junk profiles that these manufacturers keep pushing down unsuspecting users' throats.
But it's true, some calibrators really are "silly devices" and in some cases you really are better off using sRGB. I've accumulated about 8 or 10 different calibrators over the years but if you ask me now I only trust two of them. Both especially and exclusively made for the displays they're used on.
Still, it never hurts to get into good habits early on. Your knowledge improves, your equipment improves, and you move on. The early takeaway for me was that it helped me understand what color management is and what it does - and where it does it. Pretty basic stuff, but nevertheless an important leap in understanding. A small step for a man and all that...

Iphoto preview not showing corrections with Yosemite

I created a new iPhoto file for 2015 and when I make adjustments to some of the photos with an outside editor (PhotoShop), the preview image does not show the corrections after making the changes. This has always worked before.
If I click to open the preview image after changes were made, the image shows with the corrections made but the menu under photos does not have the "revert to original" active and is grayed out, even though there have been changes. Yet, if I check the package contents of the 2015 iPhoto file to check the contents for the new pictures, the changed photos are shown under previews and the originals are shown in masters.
Since I got the iPhone, I had not used my digital camera since a June 2014 vacation. The preview corrections will always show if it is an iPhone picture but will not show the corrections if it is from my digital camera. If I export the camera photos with Image Capture to another folder not associated with iPhoto, then import the the pictures into iPhoto using the Import function, corrections will be saved and the preview will change to show the corrections (as previously). The picture also shows the revert to original option as available.
I had not used the camera since I upgraded to Yosemite so I went back to experiment in Mavericks which is on another drive and imported a test picture from the camera into iPhoto, made extreme changes to make it easier to see in the preview, and saved. The preview showed the corrections and iPhoto behaved as expected. I imported the same picture into Yosemite from the camera into iPhoto, made new radical changes and the preview did not change, no revert available, or the changes saved. Import in both instances was using the same picture on the same SDHC card in an external card reader.
These experiments seem to show that the problem is not my pictures or the card, but it a problem with iPhoto importing digital camera pictures under Yosemite. Since the iPhone imports directly and not through a reader, can it be that iPhoto under Yosemite has a problem communicating with the reader that does still work under Mavericks?
I know how to avoid the problem by this two step importing, although it will not break the photos into the auto-split of the events to individual days as would be if directly imported, but as one cluster of multiple day photos - a problem since I sort by date under View. The splitting by days is important for me. I do not want to sort trip pictures into individual days before importing as I might have as many as 1,000 photos in a single trip!
Is there a solution?

Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Screenshots are from PSE 10
Note 1: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Note 2: editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

APERTURE: Small preview images do not show the changes.

excuse my lousy english...
Problem with Aperture:
Small preview images do not show the changes.
I use Aperture 3 since August 2010. By November and 10 projects later it ran normally.
Since the project 11 are in the preview images shown (on the bottom bar in the shared representation) and in the pictures in the books no adjustments. I change for example a picture in b / w it remains in the small preview images bunt even though the great View Erbild s / w is. Even in the books then the famous picture colorful and even grobpixelig.
This is of course in the processing of multiple images per project huntert pretty annoying to have no overview of processed images ...:-(
I had a third installed for books and not as close a relationship.
Does anyone have similar experience or know someone how can I fix this?
Thanks for reading!
Lokoe

Lokoe,
To make sure we understand:
I change for example a picture in b / w it remains in the small preview images bunt even though the *great View Erbild s / w is*.
I am not sure what "s/w" is, but I think you mean:
"I change picture to black and white and the small preview images remain *in color* even though the *big picture in the Viewer* is in B/W."
Even in the books then the famous picture colorful and even grobpixelig.
"In the books the selected picture is colorful and even ???"
"Grobpixelig" -> "grosspixelig" -> "Looks like big pixels???" Not quite sure of the translation. It's been 15 years since I spoke Deutsch!
nathan

Cs6 bridge not showing thumbnails for raw file

Just upgraded to CS6
cs6 bridge not showing thumbnails for raw files.
Can see thumbnails in CS5.1 bridge and LR 4.2 which fortunately i did not uninstall.
Bummer since I am up against a hard deadline.
Really Sucks

We can't know. You are not offering any system information or e.g. info about what image files you are working with. Since they do show up in your otehr programs, my assumption would be that you need to switch the Camera Raw engine back to the 2009/2010 version in Photoshop and not use the default new 2012 one. Perhaps your thumbnails will appear then....
Mylenium

Preview module does not show ajustments

Hi everyone
This is a problem that has arisen very recently.
When carrying out adjustments in the develop module the preview image does not show the changes however the thumb nail in the filmstrip at the bottom of the screen does.
Can anybody help please as it is rendering the programme unusable.
Many thanks

Sorry Keith details as follows
What version of Lightroom? 5.4
Have you installed the recent updates? Yes
What operating system? Win 7 x64
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive? Intel I7, 16GB ram, runs from 1TB D drive with 580GB of space
Has this ever worked before? If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? Recently added the following Dr Brown services, Adobe paper textures pro, Adobe watermark, Adobe emailer
Thanks

Spot colors not showing correctly in acrobat 11

Spot colors not showing correctly in the output preview as well as the page correctly. I have a spot pms
295 on a page in a few different areas of text and backgrounds. The spot color shows on 1 of my backgrounds
and text and a spot color on another background does not. These items are on the same page. Although I
can use the eyedropper to check the color of these items and it states the spot color is present. The page
also prints correctly. Previews not happening.

I included 3 screen shots from Acobat 11 of the test requested. Also, included the last screen shot from Acobat 9 of same file.
Which shows correct preview. To eliminate possible ICC profile issue. I did change profiles to all that were in the profile list
with no change in either test.

How do I report a video not showing correctly?

I tried to find a Contact Us to "Report an issue" but ended up chasing my tail.
This video is not showing correctly in the frameset during preview.
http://itunes.apple.com/us/music-video/medley-surfer-girl-wouldnt/id504074645
at least ... not for when whenever I tried to watch it.

Most every product Mozilla has is from say a mozilla.org site link.
https://mozillalabs.com/en-US/projects/
https://www.mozilla.org/en-US/products/
The only real video related thing Mozilla has is https://wiki.mozilla.org/Shumway and more info at http://mozilla.github.io/shumway/
The site you downloaded this NewVideoPlayerSetup.exe from was a scam as it uses the inexperience of users and popularity of Mozilla and the Firefox browser to trick people into installing stuff like this.
Next time if you are uncertain you should ask as somebody will then tell you if it is legitimate or not for example.

MiniDV Video in Affert Effects not showing correct ratio.

I'd like to know how to edit minidv video in its aspect ratio in After Effects. Video is 720 by 480 and 16 by 9 (non-square pixels). When I import the video, it's stretched too tall (set to square pixels I believe). No mater how many times I change the composition ration to widescreen, it still does not show correctly.
I seem to do fine in Premiere. It automatically sets the aspect ratio for minidv video. But I can't get After Effects to do it. I don't want to spend time creating something only for it to be squished in Premiere later.
So how to do create a composition that's 16 x 9 using non-square pixels 720 by 480 that can be edited into miniDV video in adobe premiere?

If you properly interpret your footage as widescreen (AE may guess incorrectly here) and put it in any square pixel comp it will not look distorted but it may or may not fill the frame. It will only fill the frame if the frame size is the square pixel equivalent size of your widescreen footage. This applies to all non square pixel aspect ratio footage.
If you interpret your footage as widescreen and put it in the same format (NTSC, PAL HDV) widescreen comp it will also fill the frame. There may be some black pixels on the left and right side because almost all cameras don't put live pixels in every column or even every row of the frame, but the footage will fill the frame. The caveat is that this footage will look distorted unless you activate pixel aspect correction preview in the Comp window because computer displays are always square pixels. You have to fool the display by selecting this option.
When you render your widescreen comp, if you're using any of the standard DV codecs or a codec like Quicktime Animation or JPG, there is no place in this codec for an aspect ratio tag that will tell apps like Premiere or FCP or Avid that this footage is supposed to be widescreen. Once you import the footage to another app you'll have to check and make sure that the footage is interpreted as widescreen there too.
I hope this helps. What ever you do, do not use the Fit to Frame option to force footage into a comp frame. If you insist on using Fit to Frame then check the X and Y scale values after you do and make sure they are identical. If they are not, you've distorted your footage at that point and it will be difficult or impossible to fix it later.

Site does not show correct on Samsung Tablet

Hi all,
I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
cheers,
Larry

Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
Both of them has got android 4.04
See the image with the specs in which it loads correct.(white background)
And here the specs of a older one (dark grey one And arround 3 years old)
And this problem occurs:
So on a newer tablet it shows correct.
Verstuurd vanaf mijn iPhone
Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
Re: Site does not show correct on Samsung Tablet
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi Larry
Please let me know if there is any specific page element not showing up correctly on Tablet.
Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
The device details would also help.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Dreamweaver codes does not show correctly

Hi, i have a problem with dreamweaver.
İ use last version Adobe CC. When i use dreamweaver for my job, codes does not show correct.
look ss please. letters cut of middle. look letter "g" "j" "y " Look MysQl letter. you see "y" is cut of
Thank you for help.

Are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f9hns3$soa$[email protected]..
> FlashRenaissance wrote:
>> When I try to preview my .html pages in Dreamweaver
8 it does not know
>> the page. The only thing that shows up is a page
that "Cannot be found"
>> with a strange extension (TMPztriqmk5y3.htm).
>
> See the TMP at the beginning? It stands for temporary.
>
>> Any suggestions on how I can get the pages to show
up again in preview
>> mode? Maybe something went wrong in the preferences?
>
> Go to Preferences, select Preview in Browser, and
deselect the option to
> preview using temporary files.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Not showing correct output when parsing the date

//WAP the gives the details of employees
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
           employee()
              nm="\0";
              dob=null;
              doj=null;
              curr_dt=null;
              salary=0;
           void getdata()throws IOException
              String dt;
              BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
              //we can create date with these 3 type of objects
              Format fm=new SimpleDateFormat("dd-mm-yyyy");
              DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
   //object of base class are type compatible with the object of derived class
              SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
              System.out.print("\nEnter the name of Employee : ");
              nm=br.readLine();
              try{
              System.out.print("\nEnter the date of birth of Employee : ");
              dt=br.readLine();
              dob=(Date)fm.parseObject(dt);
              System.out.print("\nEnter the date of joining of Employee : ");
              dt=br.readLine();
              doj=df.parse(dt);
              }catch(ParseException e){
              Date d=new Date();
              curr_dt=sdf.format(d);
              System.out.print("\nEnter the salary of employee : ");
              salary=Integer.parseInt(br.readLine());
           void putdata()
              System.out.println("\n\n\nEmployee Name : "+nm);
              System.out.println("\nDate of birth : "+dob);
              System.out.println("\nDate of joining : "+doj);
              System.out.println("\nCurrent date : "+curr_dt);
              /*if((doj-curr_dt)>1)
                   salary+=3000;
              System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
       employee emp[]=new employee[1];
       System.out.println("\nEnter the detail of employees \n\n");
       for(int i=0;i<1;i++)
            emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
}*Output:*
Enter the detail of employees
Enter the name of Employee : Rajendra Sharma
Enter the date of birth of Employee : 10-10-1979
Enter the date of joining of Employee : 05-09-2004
Enter the salary of employee : 2000
*it is not showing date in the "dd-mm-yyyy" format and not showing correct month as well*
Detail of employees are
Employee Name : Rajendra Sharma
Date of birth : Wed Jan 10 00:10:00 IST 1979
Date of joining : Mon Jan 05 00:09:00 IST 2004
Current date : 17-08-2008
Salary of Employee : 2000

Hi,
Use below code that will help u to sort ur problem.
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
private String dobb,dojj;
employee()
nm="\0";
dob=null;
doj=null;
curr_dt=null;
salary=0;
void getdata()throws IOException
String dt;
BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
//we can create date with these 3 type of objects
DateFormat fm=new SimpleDateFormat("dd-mm-yyyy");
DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
//object of base class are type compatible with the object of derived class
SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
System.out.print("\nEnter the name of Employee : ");
nm=br.readLine();
try{
System.out.print("\nEnter the date of birth of Employee : ");
dt=br.readLine();
dob=(Date)fm.parseObject(dt);
dobb= fm.format(dob);
System.out.print("\nEnter the date of joining of Employee : ");
dt=br.readLine();
doj=df.parse(dt);
dojj = df.format(doj);
}catch(ParseException e){
Date d=new Date();
curr_dt=sdf.format(d);
System.out.print("\nEnter the salary of employee : ");
salary=Integer.parseInt(br.readLine());
void putdata()
System.out.println("\n\n\nEmployee Name : "+nm);
System.out.println("\nDate of birth : "+dobb);
System.out.println("\nDate of joining : "+dojj);
System.out.println("\nCurrent date : "+curr_dt);
/*if((doj-curr_dt)>1)
salary+=3000;
System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
employee emp[]=new employee[1];
System.out.println("\nEnter the detail of employees \n\n");
for(int i=0;i<1;i++)
emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
thanks,
prabhu selvakumar.

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

Characters codes are not showing correctly in my wesbite. I use other browser it works but her ein mozilla its not. Please help

This is my site http://globaledsource.com/ then the characters is not showing correctly. This is what happen in my site http://globaledsource.com/wp-content/uploads/2013/03/MAS_ThemeProbleme-1024x1024.jpg

Hi paulique, the simplest next test would be to disable all plugins and extensions (except Shockwave Flash, which is pretty much indispensable) here, restart Firefox, and see whether your font works without them:
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category

16bit Tiff & PSD previews in Bridge not showing correctly

Similar Messages

Maybe you are looking for