16GB down to 13GB plus update problems

I have an iPad 1 16GB model and according to the "Usage" section in Settings > General says it is 13GB. I need to update Garageband but I have 1.2GB available, even though the app update is 850MB, and it still won't install.

How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Similar Messages

  • 20 July Netprotect Plus update problems

    The McAfee virus scan updated itself this morning and since then has kept turning off the real time scan!
    Atempts to quick scan cause it to give "an unexpected problem has occurred"
    Is this a botched update?

    What Windows system are you using?
    If it's Windows 8 then Windows Defender is an antivirus program that is turned on by default. If you installed BTNetprotect/McAfee it should have turned off Defender when it was installed but it could be that rather than turning it off they are conflicting and this has been aggravated when you installed the update.
    If that is the case my advice would be to uninstall BTNetprotect. It can cause problems on some computers and hogs resources. Windows Defender is a capable antivirus program.
    If you are using another Windows version then Windows Defender should only be working as an anti-malware program and should work alongside BTNetprotect/McAfee however I would still advise uninstalling it for the above reasons and installing another free antivirus program such as Microsoft Security Essentials, Avast Free or AVG 2013 free.
    If you do decide to uninstall BTNetprotect follow this guide and remember to use the uninstall BTNetprotect tool after you have restarted your computer.
      http://bt.custhelp.com/app/answers/detail/a_id/13523/~/i-don't-want-bt-netprotect-plus-anymore.-how-...

  • Adobe Open and Type 1 Fonts in XP/SP3 plus updates & CS3

    Since applying the latest Microsoft updates to XP/SP3 last week I can now no longer add Open Type 1 or Type 1 fonts to Fonts in Windows, and therefore can't add more fonts for use in Photoshop CS3. I tried a new harddrive, reloaded with XP/SP3 plus updates and the exact same thing occurs. Any of those types of fonts I try to add come up as corrupt/can't load, when in fact they are not corrupt and the exact same font files load with no problem in another XP/SP3 machine that hasn't had the updates applied, and they also load without a hitch in a Vista machine. Anyone else, who has all the updates installed noticing this? Anyone have a solution? I know that this isn't exactly 100% related to Photoshop only, but it does affect the program. Any assistance or advice would be greatly appreciated................frank

    This problem is now solved. Microsoft updated the video driver for my video card, and it was obviously the wrong one. It took two days and a lot of work to discover what had caused the problem, but at least the story has happy ending. Now, back to Photoshop! :)

  • Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

    Hi,
    I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily. 
    I just installed Office 2013 on this system and have activated it as necessary.  The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM.  I have other systems with
    Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
    If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
    I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
    What can I check to try and determine what the problem is?
    Thanks in advance,
    Nick

    Yes, the 8.1 system is a member of collection where the update deployment is targeted.
    Are there any specific logs I should check in the client?  If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
    in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Computer Shuts down when trying to update to v4.2

    Hi Internet,
    I am trying to update my firmware from version 4.1 to 4.2 and as I click the update button, my computer just shuts down and does not update.
    It's like the update button is acting as the shutdown button from the start menu.
    Is anybody else having this problem?
    I have tried contacting apple customer support and end up playing the ping pong game from operator to operator.
    Please help

    Unfortunately after that I have no other suggestions... if it was my computer I would reformat the entire computer but you need a good backup to do that something is obviously corrupt and not acting right otherwise if you have another computer that you can use to update..

  • Deferring Office 365 Pro Plus Updates (possible?) - Clicking Cancel fails install (no deferral or advert retry)!

    I'm planning to deliver Office 365 Pro Plus updates via SCCM where i can control the build versions and use the already available SCCM to do so.
    My issue is around the user clicking "Cancel" when they are prompted with the notification window to close down Office apps when trying
    to release an updated build version.
    This is because when the user selects cancel the application fails with "The exit code
    is 17002, the execution status is FailureNonRetry" = FAILED. This message is taken from the execmgr.log.
    Ideally I'd like to allow the user to defer the install say 3 times and afterwards deploy it mandatory...like how you could manage WSUS patches.  
    Does anyone have any helpful suggestions around this?  Thanks in advance!

    I'll answer my own question again...:/
    If you re-run the advertisement set the schedule to something like daily then as expected the user will be re-prompted with the notification window providing they have a office app open at the time of deployment.  Ensure the program is set to re-run
    on failed attempt.
    However this will continue to be re-curring and you'll never know when the user will decide to click close programs to continue the install.  So i worked around this by using a program wrapper from AppDeploy which worked a treat.  It allows you
    to defer programs a specified number of times.  Very helpful on the user interaction side of things.
    Check out AppDeploy Toolkit

  • Updating problem...I have a update that starts out going through but then does not finish just keep running

    also with the update problem it says software update and below the running bar it says connecting to the server

    Please do the following:<br><br>
    #Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop.<br><br>
    #Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
    #Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    #Finally run the installation file you downloaded to the desktop earlier.<br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • Xcode and firmware update problem

    Hi all,
    i've been working on my app for a few month now and i have about two more weeks until i finally submit it. everything went very good during development.. untill -
    by ACCIDENT i've upgraded my firmware to 3.1.2
    since my OS is 10.5.7, as i understand, i must install xcode 3.2.1. but this version also needs mac OS 10.6
    so it's realy frustrating for me...
    do i need now to upgrade/purchase OS 10.6 and also my xcode environment in order to continue working ?
    can't i make a rollback to other firmware version supported by my current 3.1.2 xcode ?
    i've searched the net endlessly and just couldn't find anyway to downgrade my firmware (i have a 5.11.7 baseband and 6.2 bootloader)
    please...
    any help ?

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

    After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • No drop down menu under "report a problem"

    When I go into My Purchases and click, Report a Problem for an album, it only takes me to the FAQ page. In that FAQ page, it mentions using a drop-down menu to select the problem you are having. Why is it that I do not seem to have that option in my Itunes Account page? Or is it simply that the FAQ has not been updated for the latest version of Itunes?

    My advice is, don't use that 'Report a Problem' through itunes purchase history. Use your browser and this link
    http://www.apple.com/support/itunes/store/browser/

  • Zen 8G This device cannot start code 10 and firmware update problem

    I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
    I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
    If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • 3000 N100 0689-A42 BIOS update problem

    I bought this laptop one years ago and it came with 63ET62WW, V1.08 BIOS. After then, I haven't updated any BIOS.
    But today, I go to the website  BIOS Update Utility - 3000 C200, N100   and download the 63af07us V3.11 BIOS (DL01108A.WPH). I run th AdRomLdr.exe as a administrator under Vista Basic. Then a Phoenix WinPhlash windows pops up. Next, I flash the bios without battery  and external USB device. After all, it says the BIOS succeed to update and shut down Windows automatically.
    The problem is: when the laptop reboot, it still shows the V1.08 BIOS, not the V3.11 BIOS.
    1. Does it mean the BIOS update is fail?
    2. What should I do in order to update my bios sucessfully.

    Hi Joseph, I don't know whether my guidance is still relevant for you and others after all this time but anyways, here goes. the version v3.11 is the version number for the bios utility file 63af07us and not for the actual bios that is going to be installed. as the bios image file in version 3.11 is DL01108A.WPH, the version number for the bios is also 1.08. even the latest utilisty version 3.12, file 63AF08US, which is only meant for XP loaded models has the same bios version 1.08 (actually meant for vista models) being installed on XP loaded lenovo n100 models. As I have XP on my N100, I can't even get the dam 3.12 utility to install the XP bios like it is supposed to.
    So rest assured that you laptop has the latest verion of the bios, i.e. the version 63ET62WW, V1.08 BIOS
    Regards, 
    ozzi

  • So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

    So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

    I've got the same issue and it affects all my adobe software.  You are not alone as I have seen several postings looking for the answer to this help request.

  • I have rented a movie on my ipad. It did not download due to not being on wifi at the time.  I know I completed the rental because my gift card balance went down $3.99 plus tax.  How do I find where to download the movie?

    I have rented a movie on my ipad. It did not download due to not being on wifi at the time.  I know I completed the rental because my gift card balance went down $3.99 plus tax.  How do I find where to download the movie?

    But now I can't find the actual movie...I go to iTunes to purchases and view movies , to downloads and searched the title of the movie...I can see an icon of it and it is in a separate place from other purchases but it says downloaded in faded lettering. Where is it?
    If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

  • My I phone was down loading the latest update to O S 7.o and it froze showing an I tunes icon and the wire connection to the charger. My phone is not working now.

    My I phone was down loading the latest update to OS 7.0 and it froze showing an I tunes icon, and an arrow pointing to the cord used to charge and download.
    I can't use the phone now its frozen in this screen.

    Hello, Indy car fan. 
    Thank you for visiting Apple Support Communities.
    When experiencing issues restoring or updating an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

Maybe you are looking for