17 in. iMac G4 Startup Issue/irregularity

I was wondering if anyone could help me with this. I restarted my iMac an hour and a half ago, and noticed that while it was booting up it had a folder icon with a '?' on it, and then 2 seconds later it switched to the 'finder' mac face, and booted up. Also, during the startup the screen seems to flicker more than I remember, but then I rarely turn my iMac off, so I don't have a lot of experience to reference here. I was wondering if this means more trouble to come, or if there is any preventative maintenance I can do to keep it from getting really bad. I've already run Cocktail, which cleans caches and repairs disc permissions. I've also got Disc Warrior, and the program says that the hard drives s.m.a.r.t diagnostic says everythings ok, and that the fragmentation on the drive is only 3%. What could be causing this? Could it be a software issue, or hardware, or both? Thanks a bunch to whoever can lend me a hand.
- Simon

Hello Simon,
Another way to check what is going on might be here. Go to...
Blue Apple ( top left of your screen )
System Preference
Start up disk.
There it should say that " You have selected to start Mac OS X xx.xx.xx from the volume Macintosh HD "
If it does not - That may be why the question mark appears at start up.
I would expect a little extra " flashing and banging! " if the system is hunting for a place to start working ( if that makes sense )
Regards
Ian

Similar Messages

  • 24" iMac having startup issues

    I thought I would post here in an effort to try and see if there is anything else I can do before heading to an Apple Store tomorrow. I own a 24" iMac, which I got in the fall 2006. A few weeks ago, this problem first occurred. The computer started up and the chime sounded then it got to a gray screen with an Apple logo and a spinning wheel below it. Then the spinning wheel would freeze. Then the screen would go black. I don't quite remember how I got the computer working again after the first time this happened (probably one of the solutions below), but I did and now the same problem has occurred today and I cannot figure out any way to fix it.
    Solutions I have tried today:
    1) Unplugged AC adapter and let computer alone for 30 secs and then plugged in and restarted. Nothing changed. Computer froze as describe above.
    2) Unplugged all the peripherals and restarted. Nothing changed. Computer froze as describe above.
    3) I reset the SMC by removing the SO-DIMM modules and reinstalled them. Nothing changed. Computer froze as describe above.
    4) I reset the PRAM and NVRAM by holding command option P R. Nothing changed. Computer froze as describe above.
    5) I tried booting from the OSX Install disk. It would not do so. Computer froze as describe above. Computer froze as describe above.
    6) I tried starting up holding C and it actually gave me the option of selecting the hard drive. But then it froze as described above.
    So far, I plugged in a firewire cable and am using my MacBook to backup files so I can access the computer and its various files via this FireWire Target Mode.
    Does anybody have any further suggestions before I take it in to an Apple Store?
    24" iMac   Mac OS X (10.4.8)  

    Add me to the list on of startup problems with my 24" iMac. First off the computer seemed to be slowing up and some of my icons were disappearing.....labels were still there but not the icon. Then I tried installing the 10.4.9 upgrade. Big mistake.......it wouldn't completely install even when I used the standalone installation. Kept getting errors and the try again message.
    So after all of this, the computer would not boot up from the hard drive or from the install DVD. Fortunately, I have a external startup drive and eventually I was able to get the computer to startup from that drive. From there I was able to startup from the install CD DVD. I tried to repair Disk but it failed because of an error and I am now doing an install and archive while I write this. Keeping my fingers crossed.
    This is my second iMac that I have had startup problems. With my last iMac, it was the hard drive......Apple replaced it and the computer works fine.(my wife is now using that computer) It was during my problems then that I learned it is helpful to have an external startup drive. I operated that iMac from the external startup drive a couple of months before I took it in for repair.
    Oh boy, the first install DVD just finished and it won't eject and now I have the message "there were errors installing the software" Try again.
    Complete frustration...........I will try the installation once more and then probably a clean install if that doesn't work.
    iMac G5, G4 Powerbook    
    iMac G5, G4 Powerbook   Mac OS X (10.4.8)  
    iMac G5, G4 Powerbook    
    iMac G5, G4 Powerbook    
    iMac G5, G4 Powerbook    

  • IMAC G5 Startup Issue

    Hi, Wonder if someone can point me in the right direction or advise a fix. I have a iMAC G5 that on startup I get a flashing Globe Icon with a ? and will not perform the startup unless I insert the Install disk upon power up.
    Any ideas?
    Much appreciated
    Pjmcdee

    The startup disk needs to be reassigned to the internal HD (the globe means the machine was set to netboot) so boot up holding down the "Option" key and then choose the internal HD from the boot options/drives that should come up...
    Don't forget to set the startup disk to the hard drive once you get booted up
    because the globe means the machine was set to netboot.
    You may still want to check the disk though, the machine was set to netboot, however, it should timeout when it gets no response from the netboot server and continue booting from the hard disk.

  • A1145 iMac 20" Startup issue

    This 20" iSight iMac (model A1145) was left by a neighbor who moved.  It seems to be functional to a degree, and shows no signs of abuse.  However, on startup, all that happens is the chime, followed by the screen lighting up, but no grey apple or gear image or the blue startup screen leading to the desktop.
    I have tried inserting a Tiger install disc and restarting with the C key depressed.  For a second, the normal grey apple appears, and then it seems to freeze for a long time.  Finally, probably 15 or 20 minutes later, there's the folder image with a Mac face on it - not a question mark.   On other attempts, only a blank lit screen is present. 
    To shut down, I have to push the power button.  The disc can only be ejected with the left mouse button down on startup. 
    There seems to be some functionality here.  What could be the problem?   Are there any steps/procedure one could try to revive this iMac? 
    Or what repair would be necessary?  Anything I could do myself?  What sort of shop repair are we looking at?
    Thanks

    As indeed it does:  with option key held and released, I've now got a solid purple screen with a circular arrow on the left and a right-pointing arrow on the right..no text or otherwise 
    This is good.  You should see icons of the bootable partitions and dics.  You do not.  Perhaps you machine came out after the dvd.
    I clicked the right arrow...and now there's a watch icon replacing the cursor.
    Nothing to boot.  Not sure what happens.
    Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime.
    Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    Should the fail...
    Try taking the battery out for 10 minutes.  Put battery back in.  Cross fingers. Power the machine back on.
    How to eject a cd from the internal cd drive:
    eject cd
    List of devices:
    devalias
    List of variables:
    printenv
    More than you ever wanted to know about open firmware
    http://www.firmworks.com/QuickRef.html
    Restore Tiger 10.4 & Leopard 10.5  DVDs are available from Apple by calling  1(800) 275-2273. Have your serial number ready. Have your credit card ready too.  There may be a small fee.
    https://discussions.apple.com/thread/4720126?tstart=0  -- January 20,2013
    https://discussions.apple.com/message/24588313#24588313 -- January 22,2014

  • Have any ideas re: G5 startup issues? Long post...

    My dual processor G5 (purchased Jan. 2005) is in the shop, and, of course, out of warranty. It's been down for over two weeks. Here is the story of its demise:
    Installed 10.4.9 upgrade. Began having "launch systems" and crashdump/usb crash errors thereafter. Not a lot of info online regarding these problems, so I decided to do an archive and re-install of my system software.
    Started having intermittent problems restarting the G5. Either it would chime, but not kick on the monitor, chime and kick on the monitor but hang at the grey apple startup screen, or not chime at all, with which only the fans would come on. Apple Extended Hardware Test came back OK. Still had problems after removing my USB devices.
    Problems continued after the reinstall of the system software, eventually to the point where I could not even boot from a CD. When the G5 did operate, after a short period of use it would freeze, and I would have to force a restart and pray it would boot up completely. It would reliably freeze after waking it from sleep, but also froze in iPhoto and Finder as well.
    I have tried resetting the PMU and the PRAM with no improvement. Took it to an Apple Authorized Service Center, luckily only a couple miles from where I work. They tried booting with the Apple RAM only, then the third party RAM only, no improvement. Hard drive was completely reformatted and system reinstalled, no improvement. I am waiting to hear what else they've tried.
    My G5's serial # falls outside of those involved with the power supply issues. Yet, could this be a possibility? Any other ideas as to what the problem could be, or has anyone had similar issues?
    I freelance as a graphic designer and this has me in a panic. Now using the hubby's Intel iMac to run CS2 and it's a drag.
    Thanks in advance.

    Hi and thanks for the input. I just spoke to the Apple service guy and he still insists there is not a hardware issue. Apparently there is an Apple technical doc, available only to authorized techs, that refers to this particular issue, and the fix is a download and install (firmware, perhaps?) He has to contact Apple and confirm my G5 is within the serial # range for this particular fix.
    That's my best interpretation of our discussion. He was rather cryptic. But he says it's not the power supply.
    I did an archive and install because, like an idiot, I did not have anything backed up at that point. After that failed, I used up my stash of DVDs and copied gigs to our iMac until the G5 gave out. I had run the hardware test several times and each time came back clean.
    Permissions were repaired before and after updates; had it freeze a couple times mid-update. Tried booting in safe mode and single-user mode and still had the same startup issues.
    To add insult to injury, I purchased a LaCie Porsche external drive as an eventual backup drive whenever the G5 returns. Hooked it up to our iMac to backup the items I saved off the G5. It failed after the second use. Returned for replacement.
    Thanks.
    G5 Dual 2.5 MHz Mac OS X (10.4.8)

  • Slightly Different CRT iMac Power Up Issue

    So I saw several variations on CRT iMac Start-Up Power issues, but none seemed quite what I have going on. I have a graphite CRT iMac (bought around 2000) that I was hoping to limp along with for a good chunk of this year but realized it's time might almost be up. I'm now worried it sensed me drooling over a new Mac Pro, got jealous, and fried itself... grin
    The house had a power outage recently, and I do keep it plugged into a surge protector. However since then, when I press the power button it gives an initial chime as usual for a second with what sounds like the drive starting to whir and then immediately shuts down again. Repeat presses of the power button do nothing... UNLESS I unplug the power cord and plug it back in and it does the same chime w/ immediate shutdown.... I've opened the case, attempted to reset the CUDA or whatever it is called (if I'm pressing the right button like I think so...) and tried to blow the dust out as best I can. I've tried booting it upside down as suggested in other items. I haven't replaced the battery, which I assume is the one that looks like a short fat AA battery (Made in France which I found interesting for some reason...)?
    Any input on this would be greatly appreciated...
    I have replaced the slot loading CD/DVD drive in this machine twice just fine, so I do have some experience with the innards to draw upon.

    I don't know about that... but your CRT iMac symptoms sound like a bad analog video board. This is the part that connects internally to the CRT. When you first start the iMac, the startup process checks the board. If it does not pass a test, the iMac shuts off (probably for safety reasons). Pushing the button again does nothing, until you unplug it, which resets the iMac to try again.
    The same thing happened to my iMac. Is your iMac a slot-loader or a tray-loader?

  • Hi, having trouble with my iMac on startup. Background screen appears, but no icons,

    Having trouble with my iMac- on startup, the background screen appears, but no icons. The spinning beach ball appears for quite a long while, then when the icons finally come up, when I open a finder window, the only icons to appear are the Network and Macintosh HD icons. I've tried to repair disk permissions: this came up with heaps of errors, which it then fixed, but the original problem remains.
    Any suggestions on how to fix this?
    thanks

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Same problem(s) in safe mode?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • New StartUp Issue

    My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
    After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
    The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
    I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
    Any ideas guys??

    you can try to boot to safe mode ( restart holding Shift )
    - you can attempt to boot to install disc and disk utility
    - you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
    - chances are, this is a hardware issue though. you will probably need repairs.

  • Startup issue - Process 'Starting Framework'

    Hi
    I seem to have a startup issue with NM2004s.  I get a Half Green/ Half Yellow icon in the MMC.  The 01 instance is always yellow and never progresses onto green.  I have a process status of 'starting framework'.
    Anyone else had this issue?
    Cheers
    Ian

    Hi Ian,
      I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
      Any hints would help.
    Thank you

  • Managed server startup issue!!!

    hi all,
    i am facing managedserver startup issue
    i am start the managed server it will up take the 6 min
    how to reduce the time
    1)i am trying differnt ways 1)threaddump 2)GCparamets
    but no usee
    can u see the log and give me suugestions
    below log one perticuler area it will load the application 4 min
    please see the time stamps 8:31:01 to 8:35:09
    please give me suggistions!!
    ======================================
    ####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
    ####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
    ####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <

    hi sandeep,
    i take the thread dump 10 times at the start the server can u look into this one...
    ===============================
    CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
    PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
    Your environment has been set.
    QCHTTPHeaderIdentityAsserter.initialize
    AgileAuthenticationProviderImpl.initialize
    2010-04-10 20:03:14
    Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
    "Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
         - locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
         at java.lang.Thread.run(Thread.java:619)
    "LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d820a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
    "LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
    java.lang.Thread.State: RUNNABLE
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
         - locked <0xf2d920a8> (a java.io.BufferedInputStream)
         at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
         at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
         at java.lang.Thread.run(Thread.java:619)
    "DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
         at java.lang.Thread.sleep(Native Method)
         at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
    "VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at java.lang.Object.wait(Object.java:485)
         at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
         - locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
         at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
    "ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
    java.lang.Thread.State: RUNNABLE
         at weblogic.socket.PosixSocketMuxer.poll(Native Method)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
         - locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
         - waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    "[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
         at java.lang.Object.wait(Object.java:485)
         at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
         - locked <0xf2daa030> (a weblogic.work.ExecuteThread)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    "Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
    java.lang.Thread.State: WAITING (parking)
         at sun.misc.Unsafe.park(Native Method)
         - parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
         at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
         at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
         at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
         at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
         at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
         at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
         at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
    "weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
         at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
         - locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
    "weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
         - locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
         at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
         at java.lang.Thread.run(Thread.java:619)
    "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
    java.lang.Thread.State: RUNNABLE
         at java.util.HashMap.<init>(HashMap.java:209)
         at java.util.jar.Manifest.<init>(Manifest.java:37)
         at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
         at java.util.jar.JarFile.getManifest(JarFile.java:146)
         at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         - locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
         at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    "Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a2c0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:509)
         - locked <0xf2d7a3b0> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:462)
    "RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2d76210> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
    java.lang.Thread.State: RUNNABLE
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
         - locked <0xf2da0170> (a java.net.SocksSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:453)
         at java.net.ServerSocket.accept(ServerSocket.java:421)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
         at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
         at java.lang.Thread.run(Thread.java:619)
    "Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
    java.lang.Thread.State: RUNNABLE
    "CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
    java.lang.Thread.State: RUNNABLE
    "Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
    java.lang.Thread.State: RUNNABLE
    "Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
         - locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
         at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
         at java.lang.Object.wait(Object.java:485)
         at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
         - locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
    "main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
    java.lang.Thread.State: WAITING (on object monitor)
         at java.lang.Object.wait(Native Method)
         - waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
         - locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
         at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
         at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
         at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
         at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
         - locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
         at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
         at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
         at weblogic.Server.main(Server.java:67)
    "VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
    "GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
    "GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
    "GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
    "GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
    "GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
    "GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
    "GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
    "GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
    "GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
    "GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
    "GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
    "GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
    "GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
    "GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
    "GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
    "GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
    "VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
    JNI global references: 957
    Heap
    PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
    eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
    from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
    to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
    PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
    object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
    PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
    object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000)

  • Startup issue when having more than one database on machine

    Startup issue when having more than one database on machine:
    I’ve installed two databases.
    When I shutdown one of the database and try to start it up using
    Startup pfile=’…location..’;
    I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
    when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
    Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
    I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
    I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
    Anyone know how to get this working, i.e. starting and stopping DB without issues?
    Using oracle 11gR2 on Windows 7 64bit, all is working normal.
    Thanks,
    Ayman
    Edited by: aymanzone on Jun 15, 2011 9:27 AM

    aymanzone wrote:
    my oracle_sid is set to the name of one of my databases
    echo %oracle_sid%
    shows me the name of my first database.
    Still not working though.
    When I start the services of both databases using Services, I can connect and run queries from both of the database.
    Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
    Next ... from the command prompt:
    set oracle_sid=<Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
    From the same command prompt session or other ....
    set oracle_sid=<Other_Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Edited by: Srikanth on Jun 16, 2011 12:27 AM

  • Another startup-issue

    I have a problem with system startup. My MacBook is pretty much brand new and the system is not cluttered or anything. And still the startup-process freezes even before the apple logo appears, so I just get the grey screen and that's it. I have read about other startup issues, but in those cases the computer at least booted until the apple logo was shown, so my case is slightly different.
    After unplugging my external USB hard drive startup works. It also works when I plug it into the other USB-slot. Other devices plugged into the problematic slot (keyboard, USB-stick) work and do not cause problems during startup.
    Any experiences with this problem? Would you say the USB-slot is broken in any way? Is it something that can be fixed?
    Ordinarily, I would just use the other slot and be done with it. Since the computer is brand new, however, I'd prefer to be on the safe side.
    Thanks in advance,
    Timo

    Hi
    +"Would you say the USB-slot is broken in any way?"+
    Possibly? Running an Apple Hardware Test might say?
    +"Is it something that can be fixed?"+
    Yes. It should be covered under the standard 1 year warranty regardless. Provided the fault is not down to wilful or accidental damage it will be covered under the warranty.
    You could connect the external USB hard drive in the affected slot an restart the mac in verbose mode (command+v) at restart. This should display error messages - if any - at the point where the start-up stalls. Possibly giving a clue as to what it's having a problem with? You may see an I/OKit error problem or something similar?
    Tony

  • My PC can connect to the airport extreme but with encryption it cannot connect to the internet my iMac has no issues, any help.

    My PC can connect to the new airport extreme I just purchased but with encryption it cannot connect to the internet my iMac has no issues.  If I open the airport exteme up and provide no security everything is fine which leads me to believe it is something with the encryption between the two devices.  Not sure what step I'm missing here this shouldn't be this difficult.

    Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
    DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
    The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
    Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

  • Black Macbook Startup Issues

    Hey guys.
    I'm having a distressful startup issue with my Macbook (13-inch, black). It's happened to me before, but that was a few months ago and everything was fine. Now it's happening again and I'm getting worried that the workaround I've found won't work anymore.
    The first time it happened, I wanted to restart my computer because I had installed a bunch of things and it was running a little slow. After I restarted, I heard the "GONG", the apple appeared, and the spinning gear also appeared. It seemed to be working, but after a few minutes, the apple changed to a "do not enter" sign.
    I tried resetting the P-RAM to no avail, and finally ended up starting up in Safe Mode (by holding the Shift Key) which at least allowed me to start up my computer. From there, I was able to reset and my computer started up normally after that just fine.
    Now, last night, the same thing started happening. There were a few different things that happened this time. For one, I got a big gray box on my screen that told me I needed to reset my computer in a few different languages. Secondly, (the only thing I can attribute the cause to) was that I had opened iChat for the first time in 5 months or so. Shortly after is when I got the box.
    So I reset and started having the same problem. I've reset in safe mode now, and am currently installing an update to OSX 10.6.3.
    The only programs running at the time of the incident were:
    -Google Chrome
    -Text Edit
    -iCal
    -iTunes
    Any help you guys have for me would be GREATLY appreciated! I took it to an Apple store the first time it happened and they didn't know what was wrong with it. :/

    Well, after booting in Safe Mode and installing the update, it started up just fine. I am afraid that this is going to happen again, though. Any help you guys have would be GREATLY appreciated.
    Thanks.

  • 15" imac Flatscreen startup problem

    When I turn on my computer, it will chime, the screen comes on (bluegrey), the grey apple shows up, then less than a second goes by and I notice the grey apple icon shifts down 1/8”, then nothing else happens. Here is what I was doing when the problem starteed: I was cleaning up the computer (trashing file and programs I do not use anymore). First in ox 10.3.9. Then I restarted (with no problems) the computer in 9.2 cleaned up there. Restarted the computer in 9.2 again with no problem. Then I restarted the computer again, this time back to osx. It was at this restart that the problem occurred. I have tried most restarts as suggested to no avail. Each time I hear the chime. see blue/grey screen with the grey apple logo then nothing else happens. Any idea, thoughts or fixes would be greatly appreciated.

    Try things in Apple doc.#106464 for your startup issue. The article says it's is for 10.3.9 and down but it still applies to 10.4 systems.
    Also, try using Disk Utility to repair your startup disk (hard drive) as shown in this link, while booted on your install disk, as Barbara kindly suggested.
    Let us know what errors DU reports and if it was able to repair them.
    Try this before you buy anything. If you need help after this, we will be happy to advise!
    Cheers!
    DALE

Maybe you are looking for