17 inch Laptop 1920x1200 keynote doesn't support size

Hello,
I have just bought a 17 laptop, mmm its niceeee! Im a using keynote to show my design portfolio. My question is that my screen's res is 1920x1200 but keynote 09 only goes up to 1920x1080.
If I create a white page, even when I ask the comp to fit to screen, I get a black area top and bottom that is not part of the presentation.
How do I resolve this please?
Thanks

Hello,
maybe I am misunderstanding your question, but Keynote support 1920x1200 and many more resolutions. Simply open the Inspector and go there to Document->Slide Size -> click on the dropdown menu -> select "Custom slide size" and enter the desired values.

Similar Messages

I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

As Niel has suggested Mac OS X 10.5 Lepaord.
But first of all make sure that your iBook is above 800Mhz and you have at least 512 Meg of memory. (1 GB recommended)
Please note, that if you do install Mac OS X 10.5 on your iBook, it will not allow you to install the latest version of iTunes version 11. The most recent version of iTunes that can be installed would be 10.5, which will be compatible with your iPod touch 4th gen, provided it's not been updated to iOS 6.
Sadly you can't install any version of Mac OS X above 10.5 Leopard, as it they requires an Intel processor, which your iBook G4 does not have.
Hope this helps.

Iwlist scanning gives: Interface doesn't support sc [solved]

When I'm trying to scan for all available networks I get:
# iwlist eth1 scanning
eth1 Interface doesn't support scanning : Operation not supported
My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
make: *** [modules] Error 2
So I did try the wlan-ng26 driver downloaded and installed with pacman.
I remove the orinoco modules with
[root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
But when I try to insert the prism2_pci module, it doesn't exist. Why?
[root@ArchThinkpad orjanp]# modprobe prism2_pci
FATAL: Module prism2_pci not found.
Any heads up on what to do?
This is iwconfig before removing the orinoco modules.
[root@ArchThinkpad orjanp]# iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
Tx-Power=15 dBm Sensitivity:1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
This is lspci
[root@ArchThinkpad orjanp]# lspci
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
This is lsmod before removing orinoco.
[root@ArchThinkpad orjanp]# lsmod
Module Size Used by
radeon 78336 1
ohci_hcd 23048 0
ehci_hcd 36488 0
irtty_sir 7552 0
sir_dev 18636 1 irtty_sir
irda 144184 1 sir_dev
crc_ccitt 2432 1 irda
parport_pc 29252 0
parport 38600 1 parport_pc
rtc 13260 0
pcspkr 4044 0
eepro100 32528 0
orinoco_pci 7552 0
orinoco 44172 1 orinoco_pci
hermes 9472 2 orinoco_pci,orinoco
yenta_socket 23560 0
rsrc_nonstatic 11648 1 yenta_socket
pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
snd_intel8x0m 19396 0
snd_intel8x0 34624 0
snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss 56224 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 27268 1 snd_pcm
snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_i801 8972 0
i2c_core 23296 1 i2c_i801
usbhid 47744 0
uhci_hcd 33424 0
usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
shpchp 100996 0
pci_hotplug 34760 1 shpchp
tsdev 8256 0
joydev 10560 0
evdev 9984 0
cpufreq_powersave 2176 0
cpufreq_userspace 5680 0
p4_clockmod 6164 0
speedstep_lib 4868 1 p4_clockmod
freq_table 5008 1 p4_clockmod
e100 37760 0
mii 5760 2 eepro100,e100
nls_cp437 6144 1
vfat 14976 1
fat 41884 1 vfat

orjanp wrote:
Thanks.
I installed the 0.15RC1 version of the Orinoco drivers found here.
I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
What do I have to do to update the driver?
do you use a PKGBUILD?
update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
for a start, check under
ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
that your module is installed under the correct location (the orinoco files should be newer than the other ones)
if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
Thnksssssss....

So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

HOW TO PUBLISH YOUR WEBSITE ..FROM IWEB ..WHEN I USE TO USE MOBILE ME .. BUT NOW THERE IS NO MOBILE ME BECAUSE OF ICLOUD, AND ICLOUD DOESN'T SUPPORT IWEB PUBLISHING?

HOW TO PUBLISH YOUR WEBSITE ..FROM IWEB ..WHEN I USE TO USE MOBILE ME .. BUT NOW THERE IS NO MOBILE ME BECAUSE OF ICLOUD, AND ICLOUD DOESN'T SUPPORT IWEB PUBLISHING?

When MobileMe goes down the drain, you will need to move your website to standard hosting. Depending on your site size, I recommend A Small Orange, as the Tiny hosting plan they have is big enough for most iWeb sites and much cheaper then shelling out $6 a month for most of the other big names, and if you check out their forum, several of the members have coupon codes in thier signatures. Also, their customer service is great and very fast in getting back to you.
To upload, I publish the iWeb site to a folder, then using Cyberduck upload it to the host. Cyberduck beats iWeb's FTP uploader because Cyberduck only replaces updated pages, instead of uploading the entire site.
I hope this helps!

Internet plug in that Safari doesn't support

Ouestion. Brand new Mac OSX 10.4 Not able to open Internet programmes,
keep getting Safari doesn't support. Have tried ticking the Rossett box in Safari
with no results. I had no trouble with G4 laptop with Panther. Would appreciate some help , thanks sarsfield

Hi,
You need to install additional plug-ins for Safari to work with RealPlayer or Windows Media video streams.
Flip4Mac (for Windows Media playback)
Real Player (free download link in the top right hand corner)
Note that Flip4Mac is not yet a Universal Binary so you will need to continue running Safari in Rosetta mode for that to work correctly.
If you're still having problems after installing those, please post the website in question so we can take a closer look.
Good luck!

MS-DOS.This system doesn't support fullscreen mode in windows server 2008

MS-DOS.This system doesn't support fullscreen mode.Choose close to terminate the application. Unable to open full size screen mode for MS-DOS in virtual windows server 2008

Please anybody could suggest why the MS-DOS does not open full size mode in Windows server 2008. PC cate shell for windows application Is running and alerting this error msg. This system doesn't support fullscreen mode. Choose close to terminate the application.
Please can any body help on this regard.

Importing video frames to layers - Photoshop doesn't support it on my version of Windows??

Ok I really need help - my laptop hard drive died yesterday and I had to get a new one. I've just booted up Photoshop on my new hard drive and it's saying it doesn't support importing video frames to layers on this version of Windows. It's Windows 7 - the same version I had yesterday (as far as I know). Does anyone know how to fix this?? I don't want to pay for someting I can't even use!!

Also, you can make sure your system is 64 bit capable by:
Open Performance Information and Tools by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking Performance Information and Tools.
Click View and print details.
In the System section, you can see what type of operating system you're currently running under System type. Under 64-bit capable, you can see whether you can run a 64-bit version of Windows. (If your computer is already running a 64-bit version of Windows, you won't see the 64-bit capable listing.)

Iv'e got this error message : "protocol doesn't support output"

When i execute my applet the part of code below give's me thi error message: "protocol doesn't support output". This part of the code save's a vector(of string) into a data file. I'm able to load the file but i can't put info in it. Helppppppppp:
That's the method where tje problem is :
private void saveVector()
Evenement Ev;
try{
// THE ERROR IS PROBABLY IN THE 2 NEXT LINES!
Dos = new DataOutputStream(new BufferedOutputStream( new URL(this.getCodeBase(), FichierEvenement).openConnection().getOutputStream()));
for ( int i = 0; i <= VecEvenement.size();i++ )
Ev = (Evenement) VecEvenement.elementAt(i);
String Ligne = Ev.getDateEvent().trim().concat("|")+ Ev.getTitre().trim().concat("|") + Ev.getLieu().trim().concat("|") + Ev.getDesc().trim().concat("|") + Ev.getPers().trim().concat("|")+ Ev.getAdresse().trim().concat("|");
Dos.writeUTF(Ligne);
Dos.close();
catch (Exception e) {
LErr.setText(e.getMessage());
}

http://java.sun.com/docs/books/tutorial/networking/urls/readingWriting.html
As is noted in this part of the tutorial, a URL may simply not support output:
"Next, the program creates the URL object--the URL for the backwards script on java.sun.com--opens a URLConnection, and sets the connection so that it can write to it:
URL url = new URL("http://java.sun.com/cgi-bin/backwards");
URLConnection c = url.openConnection();
c.setDoOutput(true);
The program then creates an output stream on the connection and opens a PrintWriter on it:
PrintWriter out = new PrintWriter(c.getOutputStream());
If the URL does not support output, getOutputStream method throws an UnknownServiceException. If the URL does support output, then this method returns an output stream that is connected to the standard input stream of the URL on the server side--the client's output is the server's input. "
Sorry I can't be of more help.

Maya iff plugin doesn't support Alpha when saving

Now that's annoying... the iff plugin doesn't support Alpha Channel when saving file! And when you open an IFF file with an alpha, generated from Maya for example, the alpha is removed and the transparent parts of the original alpha become punches out the image (so you see the grey checker in the BG).
I hope someone from the PS team reads this and fixes it. Maya converts all textures to IFF internally before rendering and that slows you down if you have a lot of textures. I was hoping I could do this in PS myself but it looks like I will have to rely on Shake to do it.
Anybody knows of a drag and drop software that could easily convert TIFF, JPG, TGA or other formats to IFF? I need and easy solution because I don't want to have to convert all my textures one by one.
Robert
PS: I posted this as a bug to Adobe...

I can confirm that if one uses the Eraser tool in Photoshop CS5 to create 0% opacity (100% transparency), the pixel values will be set to pure white. I have a content-aware plug-in that has to specifically avoid examining pixels if the transparency mask exists and the opacity is equal to 0.
We can only guess that this was done to reduce saved file sizes or something. ??? I can imagine the thinking when this was designed/implemented: "Who'd want to maintain data that was utterly transparent?"
Clearly someone does.
What this pixel destruction "quirk" DOES DO, specficially, is blow away the proposal that viewing opacity in Photoshop is completely interchangeable with the maintenance of a separate alpha channel.
I second PECourtejoie's request to make the 100% deletion non-destructive. After all, Photoshop now maintains information outside the canvas, why not maintain it in transparent image areas as well? And if it's compatibility you're worried about, make an Advanced option to toggle the functionality.
Thanks.
-Noel

I want to print file labels but the avery ap doesn't support their own file labels. Any other way to print file labels from ipad?

I want to print file labels but the avery ap doesn't support file labels, is there ant way to print file label from an ipad?

You cannot save to Dropbox from Pages natively, but there is a workaround that allows you to use the Copy to WebDAV to get things to Dropbox:
http://techinch.com/2011/02/02/integrate-dropbox-with-pages-keynote-and-numbers- on-ipad/
As to the "Send to iTunes" command "not playing ball", if you'll post specifics, perhaps someone can help you sort that out. It should be pretty straightforward.
Regards.

Front Row doesn't support Compilations / Multiple Artists

Frustrating but true - Front Row doesn't support multiple artists, so whilst you can view Various Artist albums in iTunes and on your iPod - you can't do it in Front Row. Pity - I just spent £600 buying an iMac SOLEY to use Front Row for a large music collection..... so please put me out of my misery. What am I doing wrong ?

great!
I found the same question and the SOLUTION in this forum. Thank you!.
Pity that the Macbook Pro17 SPANISH manual just says "open the Front Row application" and not how to do (holding Comand-Esc).....
Nice laptop though....
Thanks again!

How many Watts in plug for Apple MacBook Air MC233LL/A 13.3-Inch Laptop (OLD VERSION)

I am taking my
Apple MacBook Air MC233LL/A 13.3-Inch Laptop (OLD VERSION) that I purchased in 2010 overseas.
I can see the voltage information, i.e. 100-240V, but I cannot find Watts anywhere.
Similar case for iPad2 that I purchased in Jan 2012 - I will also take this overseas and can see the voltage information, i.e. 100-240V, but I cannot find Watts for the iPad plug anywere
Can you help me please.......

According to Apple:
"Built-in 50-watt-hour lithium-polymer battery. 45W MagSafe power adapter with cable management system"
Take a look... http://support.apple.com/kb/SP618

If I buy anApple MacBook Pro MGXC2LL/A 15.4-Inch Laptop with Retina Display (NEWEST VERSION)MOTHERBOARD, CPU AND CHASIS ONLY what else would I need to buy to get it fully functional?

If I buy an Apple MacBook Pro MGXC2LL/A 15.4-Inch Laptop with Retina Display (NEWEST VERSION)MOTHERBOARD, CPU AND CHASIS ONLY what else would I need to buy to get it fully functional?

Mac 101
http://www.apple.com/support/switch101/
http://www.apple.com/support/mac101/
http://www.apple.com/support/macbookpro

17 inch Laptop 1920x1200 keynote doesn't support size

Similar Messages

Maybe you are looking for