17" intel iMac screen froze then has gone completely blank. Any ideas?
Hi There,
My 17" intel iMac screen froze then has gone completely blank..
I've done a SMC reset to no avail.
thanks
Richard
If it won't startup in Safe Mode, then try Startup Manager or the Apple Hardware Test from your original Install Disc.
Similar Messages
-
My I pad has a red blotchy screen and keypad has gone blue? Any ideas how to solve?
MY iPad has a red blotchy screen and keypad has gone blue, any ideas if I can rectify this?
This happened to me a few times. Take the case off and sit down, give it (Back side of ipad) a hard smack on your thigh, but do it in a way that the back lands flat on your leg. There are some component cables that can come loose and this smacking motion can cause them to go back into place.
*be cautious so you don't dent the Ipad* -
Since the newest hp update, my sound has gone completely silent. any ideas?
I have an HP Pavilion g6 and I just updated with an unknown update (it doesn't show in my "View History") so I'm not entirely sure which one it was, but since then I've lost my sound completely. I'm about to update my sound driver, but in the mean time, does anyone have any ideas?
Hi, Megan:
Try a hard reset of the notebook first. Info on how to do that is at the link below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01684768&prodT...
Paul -
My screen on my iPhone has gone completely blank. I can hear it ringing but am not able to answer it. Any advice?
try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
have you tried charging the device ?
if so and it still does not work you can try a Forced Recovery..
by holding the HOME button down and plugging it into your computer at the same time..
http://support.apple.com/kb/HT1808 -
My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
I am in Greece and my iphone has completely blacked out. I have had it on charge in my room but nothing. screen completely blank. any ideas?
See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062 -
I have a 3rd generation IPod and the screen is black - it is fully charged and will play music but there is nothing to be seen on the screen. I have no idea how to fix this. We live in France now so any of the fixes have to be in English since I can't read French. Any advise would be greatly appreaciated. I looked at some of the other answers but I have no idea where the Hold button would be on this. Thanks.
Try here:
iOS: Not responding or does not turn on -
i have heard a few people talking about a hard reboot, which you need the power botton and home botton for but i broke my power botton awhile ago.
Hold both home and sleep buttons together until apple log appears and then welt go and wait for phone to restart
-
Camera feature has gone completely blank...any easy fix?
I wonder if this problem is common...my camera feature just went totally blank, almost as if the shutter is stuck closed...however the entire screen is blank. If anyone is familiar and knos of an easy fix, it would be greatly appreciated.
ThanksSame problem followed solution from another support page as folows:
Move camera app from main home screen to one of the other screens restart itouch and it worked. -
IPad has gone completely black, any suggestions
I was using my iPad and it stalled in an application so I pushed the round center button on front . It went black and will not function at all. I tried plugging in charger although I recall it having at least 60% but nothing happens when I try to turn it on, just black.... Anyone else have this happen & how was it solved?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
The screen on my 4s is completely grey any idea how to get fixed or should I purchase a new one?
My idea screen is grey. I am unable to see anything on it and the only I make calls is by using Siri.
Hi queenming,
If you are having issues with a grey screen on your iPhone, you may find the Display portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
My iPad 3 screen has gone completely black and does not respond
MY iPad 3 screen has gone completely blank (blacked out) and does not respond to either of the power buttons.
ANy suggestions?If the battery is not flat, try a reset.
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider. -
My touch screen on my ipod Nano, Gen 6 has gone completely white. It had started going white the day before. I tried resetting it but to no avail. Does anyone know how I could fix this. Also I have 2 other ipods that I am no longer able to sync. It comes up with a message (best I can remember) something to the effect that my itunes version is not compatible with my ipod. Please help. I'm tired of buying new ipods when the new hasn't even worn off of them!!!
ThanksTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
HI, How can i enable CSV output in SQL Script Regiaon Steps, Page Definition > SQL Report >Report Attributes > Report Export > Enable CSV Output Best Regards Perumal Swmy.R
-
Validation required for a GL account
Hi Guru, I want to have a validation for a GL account 571006 to use WBS element for manual postings and should give error if WBS element is not entered against this GL. Can you please let me know how to create a validation in GGBO. Thanks
-
Dear Guys, How come I get an error msg like that? My autoexec.bat is PATH C:\JDK131\BIN SET CLASSPATH=.;C:\JDK131\BIN;C:\JDK131\CODE Note: 1. I put my Java codes in C:\JDK131\CODE 2. I compile the Java code (test.java) in C:\JDK131\BIN 3. I am using
-
Managing session using cookies..Need urgent help
Hi, For my app thats running in Tomcat, I need to get the user authentication by using a cookie created by a perl application. Is that possible? I know the cookies name and the field names. Pls suggest me. Thnx in advance. Guhan
-
Hello all, I am new to SAP, so please bear with me. I have a ABAPJAVA test system, with the central instance and a dialog instance installed in the domain and the central service instance installed as a local installation. Before, all three instance