17" MBP - TN or IPS? - Light Leaks? . . . Hello?

I made these same queries in an earlier post, but no one replied. I'm trying again.
I'd like to know how the new 17-inch MBP's display compares with that of the 15-inch. I know it has a greater gamut. But does the viewing angle suggest it uses TN (Twisted Neumatic), IPS (In-Plane Switching), or some other LCD technology? And has anyone's display exhibited the same kind of light bleeding that has plagued the 15-inch models?
I've had a 15-inch MBP since December and am not thrilled with the display. It apparently uses TN LCDs, as it has a very narrow viewing angle. And as has been described in other posts, many individual displays have a problem with light bleeding around the perimeter.

EWW: Thanks for elaborating. (Your full message isn't displaying, but I received it in the email notification. Don't know what happened to it.)
Your point is well taken, but after talking to an Apple rep, and then noting the number of posts from people who got multiple replacements with the same problem, it seems an uncomfortable proportion of 15" MBPs recently shipped are in this condition, to some degree. And for myself, far from the nearest Apple service, repair or replacement is lengthy and inconvenient.
I fully intend to have the problem corrected. But there's no hurry.

Similar Messages

  • Light Leaks on 13" MBP unibody

    Hi
    firstly I just wanted to let you know that the machine in question is out of warranty by a few months. I have noticed two things, one of which I have noted on here before.
    In the past few weeks I have noticed light leaks at the bottom of the display (faint but I have some concerns that will progressively get worse) also spots have started to appear in the bottom left hand corner.
    This is the main issue but was looking for advice. whether it is a case of apple being able to replace the screen etc.

    Apple can almost always repair or replace something. The question is how much it will cost and whether or not you are willing to pay the price.

  • T450s Light Leaking around display

    Hi to the Lenovo Community! I just purchased the Lenovo T450s Thinkpad from their site. It has a pronounced problem with light leaking around the display frame, especially from the bottom part of the frame. I've seen a PC Mag review that mentions this same problem. I'm wondering if this is a problem with other T450s machines, and if there is a fix for it. I'm trying to contact Lenovo support since this is a brand new system, but would like to know if any other T450s owners are having this problem, or if it may be a general problem with thinkpads or laptops from Lenovo in general. Thanks in advance for any thoughts about this issue! Robert

    Puppy wrote:
    The article is 10 years old and about a desktop panel with CCFL (not LED) backlight type, there are more pictures http://www.tftcentral.co.uk/articles/dell2005_backlight_fix.htm I wouldn't recommend to do this with notebook panel. Unfortunately you can not fix the LED backlight hype. My 11 years old R51 with 15" SXGA+ IPS CCFL display has almost no backlight bleeding. On the other hand the display lid is 15 mm thick Puppy, Thank you again for your technical insight and expertise. Needless to say, I'm not planning on taking my T450s apart anytime soon! FWIW, I did have limited success with this method, but to anyone reading, I used very, very light pressue, no more than you would use cleaning an LCD screen, and even lighter than that. I did not use the amount of pressure recommended in the thread, nor did I use the tapping. Also, there were many, many responses warning of the permanent damage you could cause to your LCD panel display so I would advise caution!!!!  This is what I did. I used very light back and forth rubbing motions with the tip of my index finger starting furthest away from the bezel, then continuing the same back and forth motions worked my way slowly down toward the bezel. By doing this I was able to reduce the most pronounced light bleeding by about half. Additional rubbing did not improve it further and the rubbing didn't change any of the smaller bleeds at all. While this didn't totally fix the problem, it has made it mostly a non issue for me since I no longer notice it. It could also be that I'm super suggestible and nothing actually changed at all. But that's OK because how I experience my Lenovo is all in my head anyway!

  • Windpad 110W Tablet LCD light leak and dead pixels

    Hello,
    I've just received the 110W tablet (I'm in the USA) and the LCD exhibits what I'll call light leak, where the backlight leaks or bleeds through so that when viewing a dark background you can see white light around the perimeter of the display.  The white light is in blotches and shows up around the display in various places.  My tablet most noticeably shows light leak on the left side of the display.  Has anyone else had this problem with their Windpad tablets?
    I've seen this in several other tablets I've had (Eee Transformer, Xoom FE), and it may just be something we live with, but I'd like to get your feedback before I return it to find the replacement exhibits the same light leak problem.
    Also, how about dead pixels?  Mine has a dead (always black) pixel up at the top of the display which doesn't really bother me at all.  Again, I'm just looking for your experience with these issues.
    Thanks!

    Quote from: blakebart on 06-September-12, 11:05:49
    Interesting that you would return it for the dead pixel.
    Absolutely, on a screen this size it would be very annoying. I have only ever had a dead pixel at work and made them change it.
    I have no idea what MSI's dead pixel policy is  though so that may affect whether you can return it or not.

  • Anyone else have Light Leaks on their new 27inch iMacs?

    I just received my custom 27inch imac a couple days ago, and found some subtle light leaking on the lower left hand corner about the size of my fist, and a much smaller one on the lower right side corner. The lower left side is most noticeable when the screen is dark. Is this occuring with anyone else and what choices do I have with this?

    Hi guys. Custom 27" iMac, same thing.
    Lower left corner whiteish on dark screen, less but still visible on the right lower corner.
    I think that unfortunately it is a "normal" thing. IPS screens seem to be like this, and if you notice it, on a dark screen if you move your view angle, it turns almost white. LCD is not a perfect technology yet, and even if it is hard to say after spending all those money on a computer, I have to admit that (especially on such a big display) it is fairly normal.
    Therefore, if you ask for a repleace, you might get the same problem, or the same problem with some dead pixels on top of it.
    I'm not going to ask for it, even if I know how frustrating is to notice that what is sold for perfection is not.

  • Light Leaks and reboots on CLNR.

    So my new phone per the great policy was replaced with a refurb. That seems fair. The refurb I noticed has light leaks and the screen appears like it its not tightly sealed all the way around.
    A replacement is on the way but not before the nice verizon rep that told me the only way the screen would be loosing adhesiveness, since I did not notice if it was like this from day one, 25 days ago, is humidity or water damage.. Yeah for three weeks I have been watching my mom die, now that is out of the way, i have time to focus on all things thunderbolt... I should be aware of the details of my refurb junk. I am now aware at their discretion they will decide to arbitrarily charge me for something I did not do.  Because adhesives or humans who rebuild these things never fail. Only the user, I guess
    Better believe the next one I guess I will need to fine tooth comb it on day one. I was going with the assumption of quality. I was wrong
     Rooms to Go does the same thing... We had 3 month old furniture with cushions starting to break down. Did rooms to go say we were sitting on them to hard, maybe they might suggest at 170 pounds I lose some weight as I am 6' 1" and a guy.  No rooms to go replaced 3000 dollars worth of furniture with NEW furniture.  Rooms to go replaced it with a different model, style, etc... since the first did not meet expectations.  They delivered that new set tuesday of this week. 
    All sarcasm aside, my mother did pass, rooms to go did replace my furniture, and I am waiting to see if I get charged for something I did not do to a defective phone because I did not notice the slight lifting of the screen the day the sub par replacement arrived... 
    Reading is fundamental and I will only be a verizon customer until this contract expires... There 14 day new replacement policy for sub par equipment is a disservice for the millions of dollars they receive from hard working folks like you and I.  
    Two companies. One sells 3000 dollar items replaces with no questions. One sells 500 dollar items and continues to make 1500 a year off of thorough recurring billing and gives you junk replacements... Some business model.

    Hello kballard72,
    I know how frustrating it must've been for you to experience issues with your device.  Please let us know if you experience any difficulties with your replacement. We are always here to assist.

  • Lumia 920 light leak

    Hi Nokia Singapore,
     I'm the user who facing Lumia 920 light leak on top left. May I replace a new one? I bought this Lumia 920 on last Saturday from Vivo Starhub

    problem no.2
    dust under front camera.
    please at attached files.
    http://i.imgur.com/RFMLF.jpg
    hello nokia, did you hear me?
    Attachments:
    2012-12-16-1697.jpg ‏1046 KB

  • I have light leaking from the right top corner of my iPhone 5.is it a problem or a major thing. Is there anyone, who hasn't got this problem?

    I noticed light leaking from the top right corner of my new iPhone 5 from a small area. I noticed first, when I changed the brightness to higher and when I changed back the light was still there.

    Personally I would take it to the Apple Store cause the iPhone is still under warranty. You should try your carrier first if your not near an Apple Store and then go from there based on what help or lack of help they provide.
    Best of luck.

  • Does the iPhone 5 'light leak' affect function?

    I just recently received my white iPhone 5, and I have a small light leak near the power button along the bezel. Does this affect the function of the phone, such as the screen brightness? And Would Verizon replace it?

    There may be a possibility it could affect the function but not likely. I would call Apple and report it though as they may replace it, Verizon would send you straight to Apple. Being that this is still such a new product they like to capture new products with hardware problems.

  • Screen light leak!!!!!!

    hi there,
    i got an iphone 4, and it had replaced once aready about 2 months ago, there is a spot light leak on the bottom of the screen, when i just get it, it not really matter, but now the little spot becomes 'bigger', it is really obvious to see when the turn on and off my phone, that makes me SHOCKED by the "growing" light spot!!!!!
    i m wondering if i can get another replaced phone with perfect condition that would not disappoint me again!!!
    cheers

    It was bought from the online Apple Store.
    I'm just hoping that they'll do something about it; I know that there's some people that damage things themselves and try and return them, and it affects it for people that do have genuine claims like myself.
    One thing that pains me is that I got it as a graduation present from my parents, the second is that this is the THIRD iPod that I've had problems with over 2007 and 2008 (half way through last year my 30GB iPod's hard drive failed, it was only seven months old, and earlier this year my 1st generation iPod touch had to be replaced because it kept freezing). I guess I've just had bad luck, because I've always taken absolute care of my iPods...they've always been in cases, never been dropped, never been in a position where they could be damaged.

  • Nokia Lumia 720 capacitive button light leak

    I just bought Nokia Lumia 720 a week ago and i discovered the capacitive button has light leaked to the display above.
    The display is so beautiful and i like it but the light leak is annoying especially when the display is showing dark colour.
    Anyone has this problem?
    Attachments:
    20130530_234248.jpg ‏75 KB

    Its a minimal light leak wouldn't bother me tbh,however you can return the device to point of purchase for replacement,dont forget your receipt.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How do i fix light leaks in my photos?

    i have a light leak in my camera and my last roll of film has come out with lots of red stripes over the images, is there a plugin i can use for aperture to repair the photos? or any other suggestions would be great! thank you

    If you find a way to fix it by brushing in a curves adjustment that reduces the remand perhaps increase the contrast along the red stripes, you can save the adjustment as a preset. For photos taken with the same lens or zoom the light leak pattern will probably the same, so you start with the same preset.
    To save an adjustment use the "effects" menu in the Adjustment panel:

  • Light leaks

    I know in Premiere Pro, you can download light leaks and add them as an editing effect with an overlay, etc... Is this possible to do with Elements 11??
    Jordan

    jordanisobel
    I did so Googling to see what I could find in the way of "Light Leaks" effects,
    I came across one web site offering free ones that were described as "1080p HD clips".
    A "1080p HD clip" should import into Premiere Elements, provided the video and audio compressions of the file plus
    its file extension are supported by Premiere Elements. If this find is characteristic of what is out there with regard to
    these "Light Leaks" effects, then what we need to go after are the properties of these "1080p HD clips". They do not
    appear to be plug-ins, rather files imported (hopefully) into the project with the project's Add Media/Files and Folders.
    More later.
    ATR

  • Iphone 5s had white light leaks on lcd after unlocked with touch id

    My iphone 5s had white light leaks on lcd after unlocked with touch id. It's a bit confusing because if I unlock with passcode, there's no white light leaks. Does anyone have the same issue? What should I do?

    Title: Burst of White Light on iPhone 5S and iPhone 6
    Description:
    On unlocking the device with Touch ID a burst of white light is produced from the Top Left/Right corners of the screen.
    It happens when more than two folders are created i.e three/four folders each having some applications and the phone is locked while on the same screen.
    If no folder or maximum two folders are created then no such burst is produced when unlocking with Touch ID.
    Steps to reproduce:
    1. Configure Touch ID
    2. Use Black/Dark wallpaper on Home & Lock Screen.
    3. Create minimum four folders either on the home screen or the second having some applications in each.
    4. Being on Home Screen lock the phone.
    5. Unlock with Touch ID and a Burst of White Light will appear on Top Left/Right Corner.
    6. Now move/drag two of the folders to the other second page.
    7. Go back to Home Screen and lock the phone.
    8. Unlock with Touch ID and there is no Burst of White Light.
                        OR
    Repeat step 1 and 2 as listed above.
    1. Go to the second screen (after home screen) and create three or four folders with applications in it.
    2. Lock the iPhone while on the same screen.
    3. Unlock with Touch ID and there is a Burst of White Light.
    4. Now drag or remove the folders with only two left.
    5. Lock the iPhone while on the same screen.
    6. Unlock with Touch ID and there is no Burst of White Light.
    NOTE: If iPhone is LOCKED and UNLOCKED when on the screen with no folders NO WHITE BURST is there.
    Problem Since:
    Burst of White Light when apps added to a folder and unlocked with Touch ID. This is noticed since the update iOS 7.0.6 [11B651]
    Devices:
    The burst of light on iPhone 5s is easily recognized but on iPhone 6 its for a fraction of a second. Not checked on iPhone 6+.

  • Light leaking from lower left corner

    Just got my iphone 4, and there's a light leak in the lower left corner of the display. It's only noticeable when the surrounding area is black, as when booting up.
    Anyone else have this issue?

    I think if you have this issue you should returne it to apple or give a call and talk with an expert, because you played for an excellent quality iPhone and you deserve to have it. I don't have the iPhone four but I think its a big problem and you should do so.

  • Canon 5D Mark III = Light Leak & Exposure warning

    For those keen on the new 5DM3.... a warning about the exposure metering.
    It's been reported that using the LCD light in dark environments will affecting the metering.
    Ambient light on the top LCD will enter the exposure metering circuits to again mess up the metering...
    http://www.engadget.com/2012/04/14/5d-mark-iii-light-leak-incorrect-exposure-readout/
    http://www.usa.canon.com/cusa/support/consumer?pageKeyCode=prdAdvDetail&docId=0901e02480538fc7&WT.mc...
    Hmm... does this mean the camera can't be trusted outdoors in bright light, nor in total darkness?

    Hi xl,
    Sorry for the delay in responding on this. I believe you are correct, and that Canon is working on a resolution to this problem. I know you’re a Nikon user, but if any Canon shooters have any concerns about this I would suggest contacting Canon directly.
    Thanks,
    Allan|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

Maybe you are looking for

  • Dual 17'' Displays and an NTSC Monitor for Video Editing

    I am trying to hook up two 17'' apple monitors and an NTSC television monitor for video editing, but all I have on the back of my G5 tower is one ADC plug and one DVI plug. Any advice on how to make this work would be greatly appreciated.

  • MAX can't find serial to USB converter COM3

    Hello friends, I am using serial to USB converter for communicating the instruments. I install drivers successfully and device manager shows COM3. But when I go MAX 5.5 , I cannot see the COM3 port in  device and interface. Please tell me solution of

  • One step procedure for STO without delivery

    Hi, I need a help. I've configured the STO one step procedure (document type, supplying plant and receiving plant) but it does not working. When i use movement type 351 it does not automatically transfer the stock to the receiving plant. Could anyone

  • Generating Excell Sheet using Reports 9i

    Hello, I wanna know how can I do to generate one excell sheet using reports, without use the option that4s generate text file using tab. I wanna know if someone have example codes, or library4s. Thanks, Paulo Sergio

  • How can I make Function return varchar2 more than 4000

    I have a function FUNCTION testing (v_pk_application in number, v_inccharges in char) return varchar2(30000) --return number is v_net_sum varchar2(30000); v_net_sum2 varchar2(30000); v_datarow varchar2(3000); v_datarow2 varchar2(3000); begin return v