1751 places two calls

Hi.
1. I'm installing a 1751 w/ 12.2(11)T1 and a VIC-2FXS. When i connect a phone on port 0 and dial a number, it places two calls for the same destination using the two ports. I ear the mix of the sound of the two channels and at the remote end people doesn't ear me. This doesn't happen when i use port 1.
2. In a VoIP configuration with multiple remote sites and a gatekeeper, how does the remote site know what are their E164-IDs to send when registring? Does the router assume the "destination-pattern" from all the "dial-peer voice XX pots"?
3. Is there a configuration example of a case study with VoIP, a gatekeeper and several remote sites? The only one i found at cisco was w/ one remote and one gatekeeper.
Thanks in advance.
Telmo

1. As for as I know there is no bug in the IOS 12.2(11)T1 related to your voice specific problem. check whether you are using the same codec on both sides.
2. Check the following links for Gatekeepers
Understanding H.323 Gatekeepers
http://www.cisco.com/warp/public/788/voip/understand-gatekeepers.html
Understanding Cisco IOS H.323 Gatekeeper Call Routing
http://www.cisco.com/warp/public/788/voip/gk-call-routing.html

Similar Messages

  • Two calls at the same time on agent detail

    Hi All,
    Pulling an agent detail report for an agent im showing two calls with exact same start and end time.  The first is listed as inbound non-acd and the second is listed as inbound acd, assigned to a queue which the agent is assigned to.
    never saw it before and cant begin to understand it.  Has anyone saw this before?

    Hey tomas.micovcin,
    I'm slightly confused by your question so i'd like to try and clarify a few things. 
    You have two AD7760. Each AD7760 is then connected to its own CED1Z. Is that correct?
    Next i'm confused between which of the two following scenario's you're interested in. 
    1.You're interested in taking measurement from the AD7760 and bringing them into LabVIEW using the CED1Z as a USB interface. This would involve building a USB driver to bring the data into the LabVIEW environment.
    2. You're interested in building code in LabVIEW that will acquire and process the data from the hardware. You then want to deploy this code to your Evaluation Board.
    Which of these scenarios are you interested in? If none of these, what are you trying to accomplish?
    Also... could you go into more detail on what you mean by "if is possible use LabView program \download from www.analog.com\, becouse i can,t find in "source code " place where i can choose name of usb port where is connect." I'm kind of confused as to what you're asking here. 
    Tim A.
    National Instruments

  • When I place a call the caller cannot here me. Also when I speak the sound is coming back to me is my ear

    When I Place a call the caller cannot hear me,also when I speak the sound is coming back in my ear.

    Ongoing issues for over two months....Read the 91 pages below
    Outgoing call issues thus far 91+ pages
    https://discussions.apple.com/thread/3404857?start=0&tstart=0
    Go to that long thread and add yourself to the list

  • How To place two images in a obiee 11g Report Page header

    Hi ,
    Greetings for the day!.
    I want to place two images (one at top left and another at top right ) above the table view . I am not sure how it is called as. i think it is page header . Can anyone let me know how to accomplish this ?
    Kind Regards
    Sudarshan

    Hi,
    Will you pls let me know the best pixel size can be given for both images ?
    Also how can i make the images left and right aligned .Formatting option is not allowing to move the images left or right.
    Pdf output of the report header should display images one at extreme left and extreme right.
    Will you pls let me know whether i can try in single view(title/static/narrative) with html code like below :
    <img src="smiley.gif" alt="Smiley face" align="middle" />
    If so pls provide the details.

  • How to place two checkboxes in a single line.

    Hi all,
        In selection screen , how we place two checkboxes
    with labels in a sigle line.
    Regards,
    bala.

    hi,
    chk this.
    chk this.
    SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN: BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(3) TEXT-003
    FOR FIELD P_Chk1.
    SELECTION-SCREEN POSITION 30.
    PARAMETER: P_chk1 AS CHECKBOX.
    SELECTION-SCREEN POSITION 35.
    PARAMETER: P_chk2 AS CHECKBOX.
    SELECTION-SCREEN: END OF LINE.
    SELECTION-SCREEN: END OF BLOCK B2.
    rgsd
    anver
    if hlped mark points

  • I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

    I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • Two call  transaction in Sigle Report

    Hello  Everybody ,
    Is it possible  to write BDC in baclground  for two call  transaction  for different  Tcode in a sigle  ABAP  Report  .
    Regards,
    Sandeep

    Hi,
    Yes it is possible. Populate the values on BDCDATA table and do the call transaction. Only thing to remeber is the document flow. It should not be dependent. I.e data created by the BDC on first transaction should not be required to post second transaction. In such cases you may face difficulty for the second call transaction.
    thanks,
    Vivekanand

  • HT4515 Just tried to place a call on my new iPhone5S.     I can hear the person I'm calling, they cannot hear me.    The microphone icon has a line through it, but tapping the icon does not make a difference.

    Just tried to place a call with my new iPhone.  I can hear the person I'm calling but they cannot hear me.     There is a line across the microphone icon, which I took to mean muted but nothing changes when I tap it.    What am I doing - or not doing?

    is your mute switch turned on (above the volume) ?  remove case and screen protecter.
    is volume turned up?
    if so do this
    account security
    Please call apple @ 1-800-692-7753 in USA
    ask for the account security team
    you may want to add a credit card to your iTunes account  before calling; so they will have a way to verify your identity.
    Peace, Clyde
    check # for your country
    http://support.apple.com/kb/HE57
    <Edited by Host>

  • Please help. I cannot place a call on BB Z10

    Hello,
    Please help. I have problem for placing any call on Blackberry Z10. It was okay until today. I think i did not make any changes for phone. I cannot make call on Blackberry and it ends as soon as i place a call. I normally receive call from someone. What should I do.
    Yours sincerely,
    Tuya
    Solved!
    Go to Solution.

    Hello enkhtuya,
    Welcome to the BlackBerry Support Community.
    Thank you for your question regarding the issue you are experiencing with making phone calls.
    Please reinsert your battery as a test. If this process fails to resolve the issue for you, please contact your mobile service provider for further investigation.
    Let us know if you have any other questions.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • How do I place two graphics side by side.

    We are using a one column with a side head. (Not that that should matter I guess.) How would I place two graphics side by side, still numbering the figures correctly. We have tried several things and finallly got them even, but it is a big hassel and then the paragraph style (Figure XX) doesn't always line up either. When I use the text frame tool to number the Figures, the numbering doesn't continue as it should. Seems that sometimes it works, but sometimes it doesn't.
    Thanks,
    ls

    If it was me, I'd set up a two-column, two-row table and set the ruling to none.
    Import the graphic into cell 1/1 so that an anchored frame is created automatically.
    Shrink-wrap the graphic. Repeat for cell 2/1.
    Then I'd put the Figure caption tag into the second row of cells, under the graphics.
    *Ordinarily, you wouldn't use the text frame tool for stuff like this, nor the Text Line tool, which is what you may be using.
    If stuff isn't set up properly, it creates a text flow that's separate from your main text flow, which means the auto-numbering counters are in two separate flows -- the reason they're not incrementing for you.
    Art

  • How do I Place Two Or More Template Regions Side by Side?

    How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
    Maybe I need to know how to place two or more template regions side by side?
    Can you insert a template into a table?
    How do you insert a template within the main template along side a region within the main template?
    Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
    Thank you in advance for any help that you can offer me.

    How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
    Template regions are not layout regions.  They do not add any structure to your page, and only provide a way to add content to whatever HTML structure contains the template region.  So - you need to make your Template's HTML provide the space.
    For example, you could have a three column, one row table with an editable region in the left/right cell.  The exact answer, though, will depend on your page's layout and where you want the editable regions to be placed within that layout.
    In addition, you say "place two templates side by side" as if the regions were the templates.  That's not correct.  There is a template file, which contains editable regions.  Thus, you could not place two templates side by side.
    Can you insert a template into a table? 
    See the answer above.  You can place an editable region inside a table.
    Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
    I bellieve you are very confused about what templates are and how to use them, and so I strongly suggest you read DW's F1 Help about templates before going further with this project.

  • How to place two narrow portlets in the same row of a wide column

    Hi,
    How to place two narrow portlets in the same row of a wide column.
    Im using ALUI 6.1
    Thanks in advance
    sandeep

    As I understand there is no easy way to do it now. I guess in theory that can be done by customizing ALUI page layout source code, but this is significant efforts. Correct me if there is more easy way to do it.
    Edited by Bryazgin at 05/23/2007 7:32 AM

  • Only two calls on 7920 phone

    I configured the maximum of calls to 4 and the busy trigger to 4 on the callmanager for the 7920 phone.
    Now, the problem is when two calls are activ on the 7920 phone, it is not possible to tranfer one of the calls to a internal number. The phone shows the message that the internal number is busy.
    Why only two calls can be handled on my 7920 phone?
    regrads
    Pascal

    try to configure a second line on the 7920. it can have up to 6 multiline appearance-extensions or speed dials. set the maxCall/busyTrigg and try the xfer again.

  • How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

    How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

    Or choose Window > Arrange > Tile
    And, you of course can copy/paste without tiling.

  • Tapping phone number does not place a call. A flag with "COPY" in it appears instead.

    I tap a contact and it only places a call automatically sometimes. Most often, I have use the keypad to make the call.
    Instead of placing the call automatically, it puts up a flag with "COPY" in it.
    Please help. Thankyou.
    Damsel in Distress.

    Try tapping more quickly and lightly. Tap-and-hold is supposed to bring up the Copy command, so the phone is interpreting your tap as a tap-and-hold for some reason.

Maybe you are looking for