180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

Thank you William for your most helpful response. I shall deal first with your three comments:
Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
I have updated my profiles as you suggest. Excellent tip.
This guidance is good. Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make. Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
The answer is “yes”. Two events have happened both of which concerned the Time Capsule:
The telephone company, with which I have access to the Internet and I have my email account, installed a new modum. After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance. The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule.
Access to the Internet failed and the telephone company reset the modum. I had to call Apple again. This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site” (not the Time Capsule).
Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup. Everything appears to be in order. When I enter the Time Capsule for this laptop I have backups going back for a long time.
Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software. So I have another backup of both computers.

Similar Messages

I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My laptop hard drive crashed, used to have lion now it is back to snow leopard. how do i get it back to lion again?

my laptop hard drive crashed, used to have lion now it is back to snow leopard. i lost all of my info, music, pictures, etc. how do i get it back to lion again? this is very frustrating because i paid $30 to download it and now i am unable to have it again.

If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

Hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!

hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!

Hello Laurabcn,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario

TS1717 Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?

Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

I have an airport extreme space station which works fine, but does not ask for the password so anyone can get on my network. I don't know what to do to fix this.

I set up airport wifi with a WEP password, but it never asks for the password and anyone can enter my network...what to do?

Is it possible to backtrack your way out of the keychain?
Yes:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Delete every entry that has both your Network Name with this Kind.
What can I do to test or reset?
You can completely erase all the base station's passwords by performing either a "hard" or "factory default" reset. You can also temporarily disable these passwords for up to five minutes so that you will have enough time to change them using the AirPort Utility, by just performing a "soft" reset. I would recommend this one first.
This would also be a good time to consider using WPA or WPA2, instead of WEP, as WEP is no longer considered secure.
I got the airport extreme based used with no softward and set up with reset on airport base and followed instructions.
You can download a copy of the AirPort Utility, that runs on OS X Tiger here.

TA21328 every time I use Safari I receive a message that says Safari is no longer responding because of a script problem with the website and I must press "continue" for the page to continue. This happens with every website I go to. What is wrong with my

When using Safari I have begun to notice this box appearing as I try to reach any website: "Safari is no longer responding because of a script on the webpage and then it lists what ever web page I have tried to reach. It then asks me if I want to "stop" the script or allow it to continue. I must "continue" it in order to reach my web page/ If I press "stop" it just keeps coming back and back and I can't continue. What is wrong with my computer or Sarari or both?

chick --
Does it mention "Slow Script?

For the past week I can no longer sync my contacts or calendar from my iphone to outlook. I have spent approx 5 hours reading what I should do to correct this matter but nothing works. Can anyone help mr?

for the past 2 weeks I can not sync my iphone contacts or calendar to outlook. I have spent 5 hours reading on how to fix this matter but nothing works.
Can anyone help me?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos

How to merge hard drives without using Disk Utility?

Hi,
Disk Utility has no visible 'Partition' tab when I click on a hard drive, so I am wondering if there is a way to merge my hard drives without using it?
A possible reason for the Partition tab not being visible is that my MacBook was set up by adminstrators at my school, and perhaps they have locked the hard drive so I cannot merge them.
Is there any way to get around that?
Thanks!

Yes, you cannot Partition a Partition, even if it's just one Partition, you must Partition the whole disk, which may erase all your data... I forget which version of OSX it changed to allow resizing Partitions.

Footage: send to a usb hard drive without using my MBP?

Footage: send to a usb hard drive without using my MacBook Pro?
Is this possible?
Imagine shooting during a voyage, reviewing the footage in camera and download it to a portable usb hard drive without using a computer in order to format the card and shoot again.
I need to be very light travelling; so no Mac if possible.
My first post around a camera.
My first two weeks new 5DMII owner ,-) and I LOVE it. Still learning how to use it...
Thanks.
Regards to all.

No. You would need to be able to plug a USB drive into your 5D and transfer the footage. Your camera can't do that. Take your MBP with you. That's what laptops are for - portability.

Macbook Pro late 2012 model with intel processor and 4G of RAM. I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

I have a Macbook Pro late 2012 model with intel processor and 4G of RAM. I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. I have ordered a 1T external drive to do a backup now. What can I do to improve my system performance?   Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

I have a Macbook Pro late 2012 model with intel processor and 4G of RAM. I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. I have ordered a 1T external drive to do a backup now. What can I do to improve my system performance?   Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory

I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory in which case how do I go about this process.

You are confusing RAM (Random Access Memory) with hard drive data storage space.
Your hard drive storage is getting too full if you can't empty your Mac's main trash.
Here are some general tips to keep your Mac's hard drive trim and slim as possible
You should never, EVER let a conputer hard drive get completely full, EVER
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
( as you mentioned, you can't empty this as your hard drive is too full.)
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
To find other large files, download an app called Omni Disk Sweeper.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

I recently uploaded 10.8, but I have a number of VALUABLE old files which I can no longer read because "power PC applications are no longer supported. How can I retrieve them?

I recently uploaded 10.8, but I have a number of VALUABLE old files which I can no longer read because "power PC applications are no longer supported. How can I retrieve them"?

Here is a post I assembled for another with a similar problem:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PPC software or Lion/Mt. Lion;
3. Upgrade to an Intel compatible versions of your software, or find alternatives that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

How do i not have my photoshop linked to my macintosh hard drive because it slows down the program by using my hard drive space

how do i not have my photoshop linked to my macintosh hard drive because it slows down the program by using my hard drive space

Which version of mac os x and photoshop are you using?
How much free space is on your hard drive?
How much ram do you have?
Photoshop needs to use your hard drive for scratch space.
If you have more than one hard drive (not partition), you can assign photoshop's scratch disk to another hard drive.
Optimize performance | Photoshop CS4, CS5, CS6, CC

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

Similar Messages

Maybe you are looking for