1841 Does Not Allow Browsing

I have a brand new 1841 that is not allowing any internet browsing. I can ping and tracert and resolve DNS, but all browsing comes back "page cannot be displayed".
I have the 4 port switch module in slot 0. We are using an XData line that comes into the router as ethernet.
I've attached my config, any help would be greatly appreciated.

Larry
I have looked at the config that you posted and believe that I see your problem which is the access list that is applied inbound on interface vlan 1. Access list 101 is controlling traffic coming into the router if I understand your config correctly. And access list 101 has only 2 statements that permit any kind of tcp traffic:
access-list 101 permit tcp any range 1099 1102 any range 1099 1102
access-list 101 permit tcp any range 5631 5632 host 172.20.1.150 range 5631 5632
and neither of these permit HTTP traffic to get through the interface. I am not clear what the logic was in constructing this access list. But if you add a statement in the access list which permits HTTP traffic I believe that browsing will start to work.
HTH
Rick

Similar Messages

Firefox with GoogleDocs, "Your browser does not allow access to your computer's clipboard." Solution?

This question was asked two months ago and never solved, so I thought I'd bring it up again, as it's new to me and perhaps Firefox has changed since then. I know it's Google, but as it pokes at Firefox, thought I'd take a shot. This is the previous question:
[[https://support.mozilla.com/en-US/questions/867479?s=firefox+access+to+clipboard&r=3&as=s|Previous question]]
Basically, when using GoogleDocs with a right-click cut/copy and paste, it doesn't function. I get the error message above: "Your browser does not allow access to your computer's clipboard." It's as simply broken as that. I recently had an issue in Firefox with the clipboard that required a system restore to solve, so that may be related.
I have done three different virus/malware scans on my computer, and everything comes back clean. Which it should be, as I'm a very careful user.

Yes, that was the first thing that I tried. I really couldn't get it to do... anything useful at all. So I'm guessing it's somehow different in detail, though the question is the same; Firefox vs. the Windows clipboard. It's difficult of course, when working with Google, to figure out where Firefox's code issues end and Google's overblown invasive code begins.
At any rate, no, that extension did not help. But thank you for the suggestion.
I'm sure that there's a solution out there somewhere....

When i am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to keep typing. i have to keep clicking on the page to continue to type letter by letter...is there some function on that i don't know about?

When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

I open a new webpage in a new tab. I then go to a link and the back button does not allow me to go back to the original webpage. Any suggestions?

I open a new webpage in a new tab. I then go to a link and the back button does not allow me to go back to the original webpage. Any suggestions?

I don't think you understood the question. I am having the exact same issue. I open a link in a new tab or window, for example: https://addons.mozilla.org/firefox/addon/backforedrop/
When the new tab opens, I click on "reviews" to open the link: https://addons.mozilla.org/en-US/firefox/addon/backforedrop/#reviews in the existing tab because I want to see the reviews for this feature. After I read the reviews, I want to go back to the main link, but the back button on my browser is greyed out, as though I was never even on the previous page. So my options are 1) Open every link I ever click on in a new tab or window, or 2) Hope the website is user friendly and attempt to navigate back to the previous page using links inserted on the current page.
You never realize how frustrating not having back button is until it happens.

Apple does not allow giveaway of iPad/iPhone/iPod ?

Hello I would like to know if this is true that Apple do not allow giveaway iPad/iPhone/iPod ? And if it so, does it apply to all world or just some countryes?
And I would like to know about country: Slovenia in Europe. And where can such company who is giveing away free apple products (in giveaways) can be reported?
Thank you

Jeaninefromca wrote:
Apple does not allow use of Adobe Flash with the IPad. Is it all right to use Bridgebaseonline with a Mac that is synched with an IPad?
Flash is not available for the iPad. If Bridge Base Online requires Flash, there's nothing you can do on the iPad, unless Bridge Base Online has an app in the iTunes App Store.
You may want to try an alternate browser like Skyfire or Puffin. No guarantees.
I have not been able to synch Ical and Iphoto with my IPad. I've been to the Genius bar 5 times and on the phone twice to try to resolve this problem.
iBook, Mac OS X (10.5.2), I cannot synch my IPad with IBook
This is a separate issue than what you stated in the subject. Syncing recent iPhones and iPads that have iOS5 on them require iTunes 10.5, which also requires OSX 10.5.8 on your Mac. Your profile says you have 10.5.2. If that is correct, you need to update to 10.5.8, then update iTunes to 10.5, if you haven't already done so.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Noob question. SWF file runs as slideshow, does not allow navigation.

Hi. I run my own company, and hired a professional to design my website in Flash. I have the editable .fla file in my possession and given that what I need is really simple, I´d like to do it myself and start knowing the tool by reverse engineering an already built site.
My problem is this:
I need to update some text information, really simple, so I did open the .fla document in Flash CC and changed the text.
However, when I publish/export the .swf file, it runs in the browser as a slideshow, and it does not allow for navigation.
The animations run in a loop that cannot be stopped, and the buttons are disabled.
What am I doing wrong?
Thanks in advance.

Error one:
if (Link[ID] == undefined or Link[ID] == "") {
bttn.enabled = false;
} else {
bttn.enabled = true;
Error two:
if (isNaN(percentage) or percentage == 0) {
percentage = 0;
left.half._rotation = 0;
right.half._rotation = 0;
this._visible = false
} else if (percentage<=50 && percentage>0) {
left.half._rotation = 0;
right.half._rotation = (360/100)*percentage;
this._visible = true
} else if (percentage>50 && percentage<100) {
left.half._rotation = (360/100)*(percentage-50);
right.half._rotation = 180;
this._visible = true
} else if (percentage == 100) {
left.half._rotation = 180;
right.half._rotation = 180;
this._visible = false
I studied Graphic Design waaaaaay before everything was done in a computer, but I do have some rather limited computer skills.
I´d like to know, if at all possible, what caused this errors, so I can avoid making the same mistakes in the future.
All I did was change some text/update pictures in the flash file, how come the code got messed up?
Thanks so much for your time.

Safari 5.1.2 still does not allow me to view PDF documents in web pages. I am running OSX Lion 10.7.2. Any suggestions

Safari 5.1.2 still does not allow me to view PDF documents in web pages. I am running OSX Lion 10.7.2. Any suggestions?

Read here > Known Issues | Adobe products on Mac OS 10.7 Lion
And go to ~/Library/Internet Plug-Ins
Move the PDF Browser plugin to the Trash.
Quit Safari, empty the Trash.
Relaunch Safari. You should be able to view PDF files now.
Message was edited by: Carolyn

ERecruiting - Data Overview - "Acrobat does not allow connection to..."

Hello gurus,
how is it going?
I'm facing one strange problem in eRecruiting.
We've got customized smartforms for Candidate and Requisition overview.
On Candidate overview we've got part, where URL links of assigned requisitions are shown.
By opening these links, it should open Requisition overview page.
But when I want to open this link, I'm getting popup window, where is written:
"Acrobat Does not allow connection to..."
I've got Acrobat Reader X, I've updated "Trust manager" and "Security (Enhanced)" also in Page preferences.
But still facing this error.
Could you advice me, how I can solve it?
I've already read many pages on google, but still nothing....
Many thanks in advance.
Regards, Luke.

Hi,
first I have a question:
You say you have the Candidate Overview Smartforms containing links to a requisition Smartforms?
So this is a custom development isn't it?
Is the Adobe Acrobat opening within a Browser window or as a dedicated programme?
If Adobe is opened separately please check, that the Browser Integration of Adobe is active within Adobe's settings.
Links within Smartforms are relative links in general and therefore just working when called in-browser.
Best regards
Sebastian

Firefox 5 does not allow me to use McAfee site advisor. How can I download previous version?

McAfee site advisor is important to me and the new Firefox 5 does not allow it's use. Can you please let me know if I can use previous version of Firefox and how can I get download.
Perhaps you could e-mail me when problem has been resolved and I can then return to using Firefox which is my preferred browser. In the interim I shall use Internet Explorer which permits site advisor Thank-you

The McAfee extension was blacklisted due to be a #2 top crasher and McAfee has been working on fixing their toolbar for a month now and it may be ready in 2-4 weeks.

TS3212 When I try to download iTune, it shows Drive K which does not exist in my computer. It does not allow me to change to other Drive and terminate download stating ' out of disk capacity"

Whne I download iTune, it shows that it will be downloaded to Drive K which does not exist in my computer. It does not allow me to change to other Drives has enough capacity. Then I click change bottom, attempting to change drive, it terminates the download.
Do you have any solutions??

Try "Invalid drive X:\" install errors. You should still be able to chose the drive for the download when downloading the installer with a web browser. The iTunes application is installed on the active system drive, usually drive C:.
tt2

The adobe version 10 update does not allow use of tabs

I had tabs working ok on my laptop, then an adobe update to ver 10 has stopped the tabs feature working. I get all sorts of notices about this being embarrissing to Firefox and analysing the problem. But nothing is offered. Everything locks up when I try to open tabs. Seems trawling q and a that this is not a prob unique to me. Do Firefox actually moniter this feedback and offer some hope of resolution?

Jeaninefromca wrote:
Apple does not allow use of Adobe Flash with the IPad. Is it all right to use Bridgebaseonline with a Mac that is synched with an IPad?
Flash is not available for the iPad. If Bridge Base Online requires Flash, there's nothing you can do on the iPad, unless Bridge Base Online has an app in the iTunes App Store.
You may want to try an alternate browser like Skyfire or Puffin. No guarantees.
I have not been able to synch Ical and Iphoto with my IPad. I've been to the Genius bar 5 times and on the phone twice to try to resolve this problem.
iBook, Mac OS X (10.5.2), I cannot synch my IPad with IBook
This is a separate issue than what you stated in the subject. Syncing recent iPhones and iPads that have iOS5 on them require iTunes 10.5, which also requires OSX 10.5.8 on your Mac. Your profile says you have 10.5.2. If that is correct, you need to update to 10.5.8, then update iTunes to 10.5, if you haven't already done so.

KeyUsage does not allow digital signatures

Hello,
I'm getting the security: KeyUsage does not allow digital signatures error (in java log) when trying to authenticate our web-based java app using a smart card (CAC). The smart card authentication works fine on one test system, but not the other. Both are using the same 'certificate' (we believe). Both have the same IIS 6.0 settings, and same java setting...as well as IE browser settings.
Visually, the symptom presents itself via the sun java login prompt when clicking the link to load the java app. We have an asp client that works fine. Only our java app is asking for re-authentication. If we manually type the credentials of a system admin, it loads the applet fine. What I can't figure out is, "Why are we getting prompted for a log-in to begin?"
Note: We have verified that IIS (via IIS logs) that authentication is successful, yet still prompted.
Here is a snippet of the java log: ----------------------------------
security: Checking if SSL certificate is in Deployment permanent certificate store
security: KeyUsage does not allow digital signatures
Exception in thread "HandshakeCompletedNotify-Thread" java.util.ConcurrentModificationException
at java.util.HashMap$HashIterator.nextEntry(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at java.util.HashMap$EntryIterator.next(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl$NotifyHandshakeThread.run(Unknown Source)
network: Firewall authentication: site=sditap10086.afsac.wpafb.af.mil/134.136.33.21:443, protocol=https, prompt=, scheme=ntlm
java.io.IOException: Server returned HTTP response code: 401 for URL: https://sditap10086.afsac.wpafb.af.mil/report.web/ASP/insight-inpage.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
Any clues?

One of the KeyUsage extension bits is DIGITAL_SIGNATURE which in your case has most likely not been enabled so try getting a certificate signed with the DIGITAL_SIGNATURE bit enabled. It would be a good idea to actual have a look at your certificate to see which KeyUsage bits are enabled and whether the KeyUsage extension is set as critical or not. If the extension is defined as critical, then all the bits have to be followed, whereas if it is not critical, then the bits can be ignored and it depends on the API used on whether they enforce what the bits say.

Ff does not allow me to download adobe reader

ff does not allow me to download adobe acrobat reader

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
A sample of Apps that can display some Flash content:
1. Puffin
2. SkyFire
3. Photon Flash
4. Browse2Go
5. Swifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

1841 Does Not Allow Browsing

Similar Messages

Maybe you are looking for