19 working fine, downloaded 20 - it crashes frequently, hogs memory, runs scripts and slows down internet. I don't want a fix, just reinstall 19

FF 19 was working fine. Downloaded 20 and within 5 mins. it crashed. Script running problems again and it slows down my internet connection tremendously. I don't want to fix it, I want to go back to FF 19 but can't find it - it doesn't exist Running XP SP 3. If I can't go back to FF 19, then I'll just remove it and stick with Chrome. I like the old private browser in FF 19 better. I run 20 - 40 tabs open at a time and the way the new Private browser works with the existing window open just uses more memory Thanks!

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Similar Messages

  • Hi I bought the oxford dictionary app a while ago and it worked fine . Now with the new iOS it starts and closes instantly. I don't want to buy it again. Who can I turn to?

    Hi I bought the oxford dictionary app a while ago and it worked fine . Now with the new iOS it starts and closes instantly. I don't want to buy it again. Who can I turn to?

    Try closing the app via the device's multitasking bar and see if it works when you re-open the app : double-click the home button to open the taskbar and then swipe or drag the app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
    If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
    If the app still doesn't work then try deleting the app from your device and redownload it (assuming that it's still in the store) via the Purchased tab in the App Store app - or resync it from your computer's iTunes (if you don't have a copy of the app in the Apps part of your computer's iTunes library then copy it over via File > Devices > Transfer Purchases before deleting it).
    If that also doesn't get it to work then contact the developer.

  • HT204406 I can't seem to download songs from iTumes Match on my new iPhone 5. It still works fine on my iPad. Both are running ios6 and there is plenty of free space on the phone (20 GB or so). The download icon shows & flashes but nothing happens.

    I am trying to play songs from iTunes Match on my phone everything is enabled. The songs and playlists show up but when I select one it won't download or play. The download status icon next to the song name flashes on and off but nothing happens. When I go to the iTunes Store the download section shows the same behavior - it flashes that there is 1 download continuously but nothing downloads. My iPad on the same network also running ios6 works fine. Any ideas?

    Problem closed (although not resolved).  After working with Apple support, no resolution was found.  I asked for a refund of the iTunes match purchase price, which was granted.  Interestingly the support tech, who was very nice if not particularly helpful from a technical point of view, spun the "resolution" of refunding my iTunes match purchase price as a positive one, here is a quote from the final email
    "I'm glad to hear that you're not having issues with the songs you've purchased.  Nothing makes Apple happier than to hear that our customers concerns have been rectified."
    It is notable that I never had an issue downloading music directly purchased thru the iTunes store, the only issue that existed was downloading songs that I ripped from my CD collection and "matched". 
    I'm happy that I received my money back, however I wish that the iTunes Match service worked for me (I was looking forward to this service).  I'm most upset at the time I wasted trying to fix this problem.
    I'll now download music the old fashioned way: syncing with iTunes directly.

  • Upload working fine, download doesn't work

    Upload working fine, download doesn't work on my PC

    Sign in at OVI from a PC or laptop and Reinstall Ovi Store on your device.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • As of today, neither sample songs on the music store nor songs already downloaded will play correctly.  They are stuttery and slow.  I have iTunes 10.5 and have not downloaded any upgrades for anything recently.  They were working last night. Thoughts?

    As of today, neither sample songs on the music store nor songs already downloaded will play correctly.  They are stuttery and slow.  I have iTunes 10.5 and have not downloaded any upgrades for anything recently.  They were working last night. Thoughts or advice?

    I found a solution that worked for me.  Here is what I did and where I found it.
    "Looks like I tracked down the problem, it worked for me so I hope this works for everyone else experiencing problems.  Go to your Task Manager and locate the program APSDaemon.exe (Apple Push)..... if you see this executing terminate the program and then startup iTunes and it should come up fine.  You will see afterwards that APSDaemon.exe (Apple Push) starts back up but this is fine as long as iTunes has already started.
    I tried playing both music and syncing up my iPhone with no problems.  Note if you shutdown iTunes again you will have to terminate the process APSDaemon.exe (Apple Push) again.  Haven't had time to see what in the world Apple Push is but this appears to have corrected the problem so that you can at least use iTunes and sync any device that needs to be synced.
    Hope that helps everyone!"
    https://discussions.apple.com/message/16998456#16998456

  • I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem.

    I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem. Uninstalled it. Still have the problem with Firefox.
    == This happened ==
    Every time Firefox opened

    How about if you right click on the PDF and select Save Link As..., and then open it locally from within Reader? Does it work ok then?  That might be a workaround until the issue within the browser is resolved.
    Rob Jaworski
    Intl Program Manager

  • Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Yes, your battery is likely toast and in need of replacement.  Not much else for troubleshooting here.  Sorry.
    B-rock

  • Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

    Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
    I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
    4SNS/1/40000000 LB1T
    I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer.  Would you know how I can find the sensor to test it?  Could my battery problem be related to something else?  Would a fresh install of Lion help?
    Thank you!
    Mike
    Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

    Why do you have LION installed on that older machine?
    So you say you built a macbook from a bucket of parts eh?   Kudos
    heres a pic of the battery temp sensor

  • I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

    I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • My sound won't work on my ipod 5. I plugged the speakers in and it works fine.  When the headphones aren't plugged in and I turn the volume up it says that they are plugged in.  Please help !

    my sound won't work on my ipod 5. I plugged the speakers in and it works fine.  When the headphones aren't plugged in and I turn the volume up it says that they are plugged in.  Please help !

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. (this was already sugested) There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an erro

    Hi there
    I ha
    Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.

    Shame you had the iPhone hacked as  O2 usually unlock their customers iPhones happily.
    We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
    However hint ....you have probably trashed it

  • I have an iphone 3g which brought him use me when I brought it worked fine, I updated the system to 4.3.3 and no longer recognizes any network operator, look at the baseband and 5.16.02 and says it is it does not recognize anything I can do? the operator

    I have an iphone 3g which brought him use me when I brought it worked fine, I updated the system to 4.3.3 and no longer recognizes any network operator, look at the baseband and 5.16.02 and says it is it does not recognize anything I can do? the operator to buy my iphone was a 4 but it was stolen, I thought I could use this but aparentementeno, I can do to make it recognize my carrier? thanks

    Looks like you have relocked a hacked phone when you updated.  The only way to fix it would be if you could figure out the original carrier and see if they would unlock it.

  • Hi there, i bought my macbook 1 week ago and its working fine. BUT the fan is always running and it is very annoying? what should i do

    hi there, i bought my macbook 1 week ago and its working fine. BUT the fan is always running and it is very annoying? what should i do

    Take it back to the store where you bought it for a hardware check and/or exchange/refund.
    If they say "that's normal" then get your money back.
    Nothing worst than a annoying fan you can't do anything about.
    I has a eMac that did that, sounded like a vacuum cleaner running all the time, I'm so glad I trashed it and will never buy a machine I can hear running in a near silent library.
    Some advice, the higher end models with a dedicated graphics do tend to operate cooler, it's the one's with only CPU graphics (Intel) regardless if a Mac or PC that tend to make a lot of noise.
    Graphics should have never been put on the CPU, it just doubles the heat and doubles the fan noise.

  • I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a pho

    I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?

    Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
    As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
    You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
    You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.

  • Firefox 27.0.1 crashes and slow dow, useless for me.I want to change IE, how can I migrating my bookmarks to IE?

    I used Firefox for more than 10 years (actual version 27.0.1). Since2-3 days Firefox crashes and slows down. I have already blocked all the additions, without any results. I have completely uninstalled and reinstalled Firefox, the situation remained the same. I can’t really use Firefox support, because I had to wait more than 5 minutes to open the page. I made 2 virus research (MS Security Essential, and MS anti malware) I did not have virus.
    I returned to the base state of Firefox, It fonctioned, but after the restart of Windows, it started again slow down.
    I tried IE it function well without any problem, but it’s slightly strange for me, but I have to work, so I must use another one if Firefox is dying on my computer.
    Unfortunately I have more than hundred important bookmarks in Firefox which are necessary for my daily work, so I can’t simply uninstall Firefox and use IE.
    My question: If Firefox is not reparable how can I migrating all my bookmarks to IE?
    Thank you in advance for your help and instructions

    First of all thank you for your response
    I saved all my bookmarks to a library (I have created a library) and I used the importation function of IE, but it was partially successful, more than 70 % of the bookmark has disappeared. I suppose it was a mistake of the conversion made by IE. So I uninstalled and reinstalled again Firefox, thereafter I reinstated the bookmarks.
    I suppose, that I found a reason for the crashes and the freezing, probably it was a consequence of the adobe flash player 12. It seems Firefox has a conflict with adobe flash player.
    So as conclusion I have trapped between Firefox and IE, Firefox does not work well on my computer, IE work, but without my bookmark and without my usual comfort and customization of my Firefox…
    Just a note: during this letter writing, Firefox has slowed down 2 times.
    Thank you in advance for your help.

Maybe you are looking for

  • Issue with processing time of JDBC receiver adapter

    Hi all, We are using PI 7.1 EHP1. We have an issue with JDBC receiver adapter taking too much time to process messages. We are using XML SQL format message protocol with INSERT_UPDATE as the document format. Each message can contain multiple records,

  • I have gone through 4 charging cables for my iPhone 5. Is it possible to claim one free of charge from Apple?

    I have gone through 4 charging cables for my iPhone 5. Is it possible to claim one free of charge from Apple?

  • Selecting an option in a SELECT feild

    lets say i have a form which allows me to edit details of products stored in a database. on this edit form, i have a select box where the user can indicate the color of the item. since it is an EDIT form, there is already data abotu the product in th

  • Album art not importing

    I have gigs of wma files on my PC that have the album art associated. When I convert the files in Itumes it does not pick up the album art. I can manually copy the album art after the conversion, but is there a way it should just copy over? Also if I

  • Cannot View Webdynpro Content

    Hi all, We are using EP7 and i get the following message when tried to view the WebDynpro content "You do not have the needed permissions to start the Web Dynpro Content Administrator. Please contact your System Administrator." But all the roles assi