1920 down to 720 for some lateral
Hi All,
Question about my avchd 1920x1080 and reducing my sequence to 720 giving me some lateral for cropping unwanted areas, so I do not have to use zoom to blow up pixels. I have seen this done with FCP however I cannot see my results after creating a 720 sequence while using 1920 sized footage. I want big footage for a smaller box to be able to crop out edges without using Scale to 150%
See pics if you are not clear on my question please. If it is easy to do please write>out>the>path to turn it on or access it if available. Not just one word like see "Kanuder Valve" Thank you.
NC
What you have circled in your first image is your Preview File format.
Changing that will not change your Sequence settings.
As Jim sez, you need to create a new 720 Sequence.
Not changable after footage is in a timeline?
Not changeable after creating it, footage or not.
Similar Messages
-
Down payemt restriction for some vendors
The issue is like this
Down payment to some vendors to be restricted but not through the separate vendor account group because after some point of time my client may allow them (vendor) for down payment.
Thanks in Advance1. Use of field in Master Data.
Decide wich field to use. For example Payment method.
in Ob28 mantain validation
Prereq. BKPF-BSTAT <> 'S'
Check ZWELS= '1'
Message Error
So, for vendor wich allowd to create DPR you'd mantain Payment method=1...
2. in Ob28 mantain validation
Check : here you'd ask abaper to write code,wich'd check Z table,where you mantain list of vendor(for wich DPR isn't allowded)
As for me, 1 varint is more useful! -
I tried creating a new user account and installing and it would not work either. I tried the uninstall recommendation from Apple and that did not work. I am running out of ideas. I even had my IT look at it and they said Apple sometimes locks down their registries for some reason.
This isn't really my thing but no one else has replied.
A few thoughts, if this is an upgrade, are you using the same account to do the upgrade as you used for the original install? If now it might be worth trying the other account.
Although you account has admin status, it might be worth logging in as THE adminstrator, if you haven't done that.
Although you don't have HKEYLOCALMACHINE\Software\.aif\OpenWithProgIds, you didn't say if you have HKEYLOCALMACHINE\Software\.aif - if you do it might be worth checking permission there.
If this is an iTunes 7.5 upgrade problem - you didn't say - it might be worth gettting the details to royb - see this post:
http://discussions.apple.com/thread.jspa?messageID=5766448� -
For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?
Thank you so much for the quick response to my question. I tested your directions and it works!! Thank you. I would never have figured that out. I knew I had to go into System Preferences but would not have guessed that I needed to have Automatic Login set to off.
-
HELP! I had iPhoto on my mac, for some reason it was not responding or damaged. down loaded a new version but can't find my photos. any ideas please. I thought once on the mac always on the mac.
Sorry but we need details to help
What version of the OS do you have? What has changed since iPhtoo worked?
What exactly is the problem - you say "it was not responding" - You downloaded a new version (what version)" -you can't find yoru photos" none of which is helpful
look in your applications folder - is there an Iphoto application there? If so get info and report the version
Look in the picures folder - is there an iPhoto library there? If so exactly (including exact error messages) happens if you double click on it?
what else can you tell us that might help us assist you?
LN -
I have been using the xfinity ap for some time with no problem. Now every time I open the ap it shuts down. I have updated software, reset, done a sync, rebooted to no avail any ideas
My Xfinity App does the same thing. Hope they are coming out with a app update.
-
I HAVE THE LATEST VERSION OF READER FOR SOME REASON IT FREEZES UP WHEN SRCOLLING OR PRINTING THEN I HAVE TO SHUT DOWN & RESTART PLEASE ADVISE
Windows 8.1 Adobe Reader XI 11.0.1
Thanks
In a message dated 3/27/2015 3:46:30 A.M. Eastern Daylight Time,
[email protected] writes:
HELPI HAVE THE LATEST VERSION OF READER FOR SOME REASON IT FREEZES UP WHEN
SRCOLLING OR PRINTING THEN I HAVE TO SHUT DOWN & RESTART PLEASE ADVISE
created by pwillener (https://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(https://forums.adobe.com/message/7359996#7359996) -
For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???
I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.
-
My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...
Hi ohmghimire,
Thanks for visiting Apple Support Communities.
If you're seeing unexpected behavior when using USB devices, try resetting the SMC on your MacBook Pro:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the article with these steps here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you still see this behavior after resetting the SMC, or your computer won't turn on, try the steps in this article next:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best Regards,
Jeremy -
For some reason I am unable to download apps. I have downloaded several apps in the past but all of a sudden my I Phone 4S will not download. I have totally reset my entire phone but that didn't work. My account shows that I purchased the app but it just appears as a grey square on my home page. Even tried other apps but nothing. Any suggestions?
For some reason I am unable to download apps. I have downloaded several apps in the past but all of a sudden my I Phone 4S will not download. I have totally reset my entire phone but that didn't work. My account shows that I purchased the app but it just appears as a grey square on my home page. Even tried other apps but nothing. Any suggestions?
-
I am a teacher and my building just purchased a set of 25 ipad 2s. I am looking for some form of a carrying case where a teacher or students can take 20-25 ipads from the iPad storage cart and carry it to the classroom. Some classrooms are on the second floor so something that would hold them safely would be great. Thanks for the help!!
Check out the carts on this page. Great ways to spend taxpayer dollars!
http://www.apple.com/education/labs/
An Apple iPad Learning Lab streamlines the management of classroom sets of iPad devices. Each lab includes 10 iPad devices and a sturdy and secure mobile cart. The cart can store, charge, and sync up to 30 iPad devices and has room for a MacBook computer. The cart rolls easily around campus, so multiple classes can benefit, and it can be locked to secure the devices when they’re not in use. For even more iPad portability, the Bretford PowerSync Tray can charge, sync, store and secure up to 10 iPad devices at once and is available only through Apple. Purchase a predesigned Apple iPad Learning Lab or let us help you build your own iPad mobile lab. -
[SOLVED] Getting freezes after using dwm for some time and exiting it
Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]--- -
I have a Samsung HD TV and I purchased a Mini Display port to HDMI Adapter today. For some strange reason I get no display on my HD tv. I even tried switching a few HDMI cables and nothing popped up. I made sure my computer performed all software updates, and I even tried calling Apple Support. They just told me to keep trying different hdmi cables and see if anything pops up. Does anybody know what the problem is? My HDMI cable is from "rocketfish" also my display port is too.
You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits. -
Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really. -
I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do this? I have done the library sharing thing but I am getting rid of my primary computer and am afraid I will lose the library.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD
Maybe you are looking for
-
these cable are so delicate that after one week of use they break down. i can't spend all my money on buying them. moreover, last week it broke down on saturday eve so i was stuck untill tuseday without a phone. i have to say that this compan is so r
-
Hi Gurus, Please help. Users are encountering error upon viewing of JPG in tcode CV03N. error "File c:\temp\img\_XXXX.jpg cannot be created" Please advice on what caused the error. Thank you.
-
I see a small photo of myself when I look at my "sent" emails from the mail application, and I want to know how to change it, I don't remember setting it up. Anyone know how to do that?
-
Adobe photoshop 5.0 will not install
Hi i have my old version of Adobe photoshop 5.0 LE "limited edition" but when i insert my cd my computer which is win 7 home premium, tell me my computer does not support this instalation and i do have 64 bit operating system. i cant seem to follow
-
[SOLVED!] agetty seems unable to ioctl() my serial device...?!
Hi. After much head-scratching as to the root of my serial cable issues (hint: if your serial cable works port-to-port on the same PC *and* shorting pins 2 and 3 for a loopback test both work, check that the ground line hasn't helpfully disconnected