1920 x 1980 HD
When should I export in 1920 x1080 HD?
When your source file uses those dimensions and your playback hardware supports it.
Similar Messages
-
Upscaling SD DV to ProRes 1080i 25fps (1920 x 1980)
Can anybody please advise which settings I need to do this as there is no default setting in the "High Definition" advanced format conversion folder. I can do Uncompressed 8-bit 4:2:2 as standard but it doesn't match my timeline in FCP.
I have the exact same issue, using MAC OS, so I assume this has nothing to do with the operating system. Converting any AVCHD footage (source is a canon HF10, 17Mbit/s) to .mov (Apple ProRes 422 or even h.264) results in a video that looks like 10-15fps. Playback of the original AVCHD footage or exporting to an MP4 works great though. I reproduce the same error no matter which transcoding software I try. (There is an available demo of VoltaicHD which I tried for example.)
Following an idea from another thread I deinstalled Perian and rebooted - unfortunately no improvement. Please help!
- Christian -
I am trying to get 3d working with the ATI drivers. I have installed the kernel and have installed the drivers, ran
fglrxconfig
. I have also added the fglrx module to rc.conf and then when i boot i get the following error message:
(ww) Fglrx: no matching device section for instance (BusID PCI:1:5:0) found
(EE) No devices detected
Here is my xorg.conf:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# DRI Section
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
#This loads the synaptics touchpad driver
# Load "synaptics"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse[1]"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
#Section "InputDevice"
# Driver "synaptics"
# Identifier "Mouse[1]"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "1700"
# Option "RightEdge" "5300"
# Option "TopEdge" "1700"
# Option "BottomEdge" "4200"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "VertScrollDelta" "100"
# Option "MinSpeed" "0.06"
# Option "MaxSpeed" "0.12"
# Option "AccelFactor" "0.0010"
# Option "SHMConfig" "on"
# #Option "Repeater" "/dev/ps2mouse"
# EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=5653
Screen 0
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Thanks in advance!no, my graphics card has Hypermemory (where it has dedicated memory, but allows you to add system memory for use as well). So i was on a forum ( www.notebookanalysis.com ) that deals only with my model of notebook, and saw someone with the same blank screen as mine, so they go it to work by using only shared video memory. So i changed that and it worked.
When i type glxinfo i get this:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
GLX_ATI_render_texture
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON XPRESS 200M Series SW TCL Generic
OpenGL version string: 1.3.5519 (X4.3.0-8.20.8)
OpenGL extensions:
GL_ARB_multitexture, GL_EXT_texture_env_add, GL_EXT_compiled_vertex_array,
GL_S3_s3tc, GL_ARB_depth_texture, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_multisample, GL_ARB_occlusion_query, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
GL_ARB_vertex_blend, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_ARB_draw_buffers, GL_ATI_draw_buffers,
GL_ATI_envmap_bumpmap, GL_ATI_fragment_shader, GL_ATI_separate_stencil,
GL_ATI_texture_env_combine3, GL_ATI_texture_float,
GL_ATI_texture_mirror_once, GL_ATI_vertex_streams,
GL_ATIX_texture_env_combine3, GL_ATIX_texture_env_route,
GL_ATIX_vertex_shader_output_point_size, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_object,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_texgen_reflection, GL_EXT_texture3D,
GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_EXT_vertex_shader, GL_HP_occlusion_test, GL_NV_blend_square,
GL_NV_occlusion_query, GL_NV_texgen_reflection, GL_SGI_color_matrix,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x2c 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x2e 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x2f 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x31 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
which tells me that DRI is enabled.....however after running glxinfo, it gives me the information above, but does not bring me back to a command line, almost as if it is frozen. There are several other applications that freeze constantly while using them.
output of lsmod:
Module Size Used by
usblp 10752 0
usbhid 40064 0
yealink 10752 0
usb_storage 62272 0
eth1394 16776 0
uhci_hcd 26768 0
ehci_hcd 27144 0
ohci_hcd 17028 0
ohci1394 28084 0
ieee1394 77400 2 eth1394,ohci1394
amd64_agp 9668 0
snd_atiixp_modem 12296 1
snd_atiixp 14988 2
snd_ac97_codec 80032 2 snd_atiixp_modem,snd_atiixp
snd_ac97_bus 2688 1 snd_ac97_codec
snd_pcm_oss 41760 0
snd_mixer_oss 15104 1 snd_pcm_oss
snd_pcm 69252 4 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_timer 19076 1 snd_pcm
snd 41956 13 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7776 1 snd
snd_page_alloc 8200 3 snd_atiixp_modem,snd_atiixp,snd_pcm
yenta_socket 22156 0
rsrc_nonstatic 10624 1 yenta_socket
pcmcia_core 32664 2 yenta_socket,rsrc_nonstatic
fglrx 417568 19
agpgart 26064 2 amd64_agp,fglrx
fuse 29712 0
ndiswrapper 150800 0
8139too 22528 0
mii 4992 1 8139too
usbcore 100484 9 usblp,usbhid,yealink,usb_storage,uhci_hcd,ehci_hcd,ohci_hcd,ndiswrapper
ntfs 186640 1
evdev 7552 0
xfs 436896 0
reiserfs 214768 0
jfs 152828 0
ext3 107016 1
jbd 49044 1 ext3
sata_vsc 6020 0
sata_uli 5252 0
sata_via 6276 0
sata_sx4 11268 0
sata_svw 5892 0
sata_sis 5892 0
sata_sil24 8964 0
sata_qstor 7428 0
sata_promise 8708 0
sata_sil 6916 0
sata_nv 7044 0
sata_mv 14340 0
mptspi 6664 0
mptsas 12300 0
mptfc 5892 0
mptscsih 27536 3 mptspi,mptsas,mptfc
mptctl 19968 0
mptbase 39904 5 mptspi,mptsas,mptfc,mptscsih,mptctl
tmscsim 18880 0
sym53c8xx 68372 0
st 32416 0
sg 26528 0
sr_mod 13732 0
scsi_transport_sas 13568 1 mptsas
raid_class 5120 0
qlogicfas408 6536 0
qla6312 115712 0
qla2322 134912 0
qla2300 125056 0
qla2200 87680 0
qla2100 79872 0
qla2xxx 106460 5 qla6312,qla2322,qla2300,qla2200,qla2100
pdc_adma 7300 0
qla1280 115340 0
osst 45088 0
nsp32 21908 0
megaraid_sas 22956 0
megaraid_mbox 28816 0
megaraid_mm 9252 1 megaraid_mbox
lpfc 125884 0
iscsi_tcp 34308 0
scsi_transport_iscsi 18112 1 iscsi_tcp
ipr 55072 0
imm 10632 0
parport 28488 1 imm
dmx3191d 12160 0
dc395x 30480 0
atp870u 27136 0
ata_piix 7556 0
aic7xxx 148788 0
aic79xx 219864 0
ahci 9988 0
libata 46348 15 sata_vsc,sata_uli,sata_via,sata_sx4,sata_svw,sata_sis,sata_sil24,sata_qstor,sata_promise,sata_sil,sata_nv,sata_mv,pdc_adma,ata_piix,ahci
aha152x 32080 0
aacraid 47616 0
a100u2w 9280 0
BusLogic 21556 0
3w_xxxx 23968 0
3w_9xxx 27908 0
sd_mod 13568 0
ide_floppy 15104 0
ide_cd 33284 0
cdrom 31520 2 sr_mod,ide_cd
ide_disk 13568 4
via82cxxx 8196 0 [permanent]
trm290 4228 0 [permanent]
triflex 3712 0 [permanent]
slc90e66 4992 0 [permanent]
sis5513 13448 0 [permanent]
siimage 10112 0 [permanent]
serverworks 7816 0 [permanent]
sc1200 6272 0 [permanent]
rz1000 2944 0 [permanent]
piix 8708 0 [permanent]
pdc202xx_old 8960 0 [permanent]
pdc202xx_new 7552 0 [permanent]
ns87415 4168 0 [permanent]
it821x 7300 0 [permanent]
hpt366 16000 0 [permanent]
hpt34x 4608 0 [permanent]
generic 4868 0 [permanent]
cy82c693 4356 0 [permanent]
cs5535 6016 0 [permanent]
cs5530 4736 0 [permanent]
cmd64x 9500 0 [permanent]
atiixp 5264 0 [permanent]
amd74xx 12956 0 [permanent]
alim15x3 9996 0 [permanent]
aec62xx 6400 0 [permanent]
ide_core 102480 29 usb_storage,ide_floppy,ide_cd,ide_disk,via82cxxx,trm290,triflex,slc90e66,sis5513,siimage,serverworks,sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,ns87415,it821x,hpt366,hpt34x,generic,cy82c693,cs5535,cs5530,cmd64x,atiixp,amd74xx,alim15x3,aec62xx
i see fglrx is loaded along with agpgart and amd64_agp..... does this mean that my modules are looking for external agpgart?
I am using the archck kernel because i thought that was the only way i could use the ati-drivers package from community.....
I have also tried re-running the fglrxconfig, but it hasnt solved anything.
Any help would be appreciated!!
Thanks in advance! -
Hey everyone! I have been using ArchLinux as my main OS for about 1 month. I've never bothered installing any GUI though.
Last week, I installed Gnome 3. Everything seemed to go pretty well. After a few days, Gnome 3 started crashing randomly (It shows the terminal boot for half a second and then it brings me back to the GDM.). When I log back in, it's as if it was a normal boot (All the applications are gone and I need to restart them.)
I have searched through the wiki and on Google and have found nothing that could explain any possible fix.
Last edited by Apos (2011-09-19 17:31:11)This is the log from my X session. I'm not sure if anything is of any interest except the last 5 lines maybe.
[ 1125.010]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 1125.010]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 1125.010] X Protocol Version 11, Revision 0
[ 1125.010] Build Operating System: Linux 3.0.0-ARCH x86_64
[ 1125.010] Current Operating System: Linux archlinux 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 1125.010] Kernel command line: root=/dev/sda5 ro
[ 1125.010] Build Date: 08 August 2011 08:24:13AM
[ 1125.010]
[ 1125.010] Current version of pixman: 0.22.2
[ 1125.010] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1125.010] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1125.010] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 19 23:44:30 2011
[ 1125.010] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1125.011] (==) No Layout section. Using the first Screen section.
[ 1125.011] (==) No screen section available. Using defaults.
[ 1125.011] (**) |-->Screen "Default Screen Section" (0)
[ 1125.011] (**) | |-->Monitor "<default monitor>"
[ 1125.011] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1125.011] (==) Automatically adding devices
[ 1125.011] (==) Automatically enabling devices
[ 1125.011] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1125.011] Entry deleted from font path.
[ 1125.011] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1125.011] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1125.011] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1125.011] (II) Loader magic: 0x7d3620
[ 1125.011] (II) Module ABI versions:
[ 1125.011] X.Org ANSI C Emulation: 0.4
[ 1125.011] X.Org Video Driver: 10.0
[ 1125.011] X.Org XInput driver : 12.2
[ 1125.011] X.Org Server Extension : 5.0
[ 1125.012] (--) PCI:*(0:0:2:0) 8086:0116:103c:3388 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
[ 1125.012] (--) PCI: (0:1:0:0) 1002:6740:103c:3388 rev 0, Mem @ 0xa0000000/268435456, 0xc6500000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 1125.012] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1125.012] (II) LoadModule: "extmod"
[ 1125.012] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 1125.012] (II) Module extmod: vendor="X.Org Foundation"
[ 1125.012] compiled for 1.10.3.901, module version = 1.0.0
[ 1125.012] Module class: X.Org Server Extension
[ 1125.012] ABI class: X.Org Server Extension, version 5.0
[ 1125.012] (II) Loading extension MIT-SCREEN-SAVER
[ 1125.012] (II) Loading extension XFree86-VidModeExtension
[ 1125.012] (II) Loading extension XFree86-DGA
[ 1125.012] (II) Loading extension DPMS
[ 1125.012] (II) Loading extension XVideo
[ 1125.012] (II) Loading extension XVideo-MotionCompensation
[ 1125.012] (II) Loading extension X-Resource
[ 1125.012] (II) LoadModule: "dbe"
[ 1125.013] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 1125.013] (II) Module dbe: vendor="X.Org Foundation"
[ 1125.013] compiled for 1.10.3.901, module version = 1.0.0
[ 1125.013] Module class: X.Org Server Extension
[ 1125.013] ABI class: X.Org Server Extension, version 5.0
[ 1125.013] (II) Loading extension DOUBLE-BUFFER
[ 1125.013] (II) LoadModule: "glx"
[ 1125.013] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1125.013] (II) Module glx: vendor="X.Org Foundation"
[ 1125.013] compiled for 1.10.3.901, module version = 1.0.0
[ 1125.013] ABI class: X.Org Server Extension, version 5.0
[ 1125.013] (==) AIGLX enabled
[ 1125.013] (II) Loading extension GLX
[ 1125.013] (II) LoadModule: "record"
[ 1125.013] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 1125.013] (II) Module record: vendor="X.Org Foundation"
[ 1125.013] compiled for 1.10.3.901, module version = 1.13.0
[ 1125.013] Module class: X.Org Server Extension
[ 1125.013] ABI class: X.Org Server Extension, version 5.0
[ 1125.013] (II) Loading extension RECORD
[ 1125.013] (II) LoadModule: "dri"
[ 1125.014] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 1125.014] (II) Module dri: vendor="X.Org Foundation"
[ 1125.014] compiled for 1.10.3.901, module version = 1.0.0
[ 1125.014] ABI class: X.Org Server Extension, version 5.0
[ 1125.014] (II) Loading extension XFree86-DRI
[ 1125.014] (II) LoadModule: "dri2"
[ 1125.014] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1125.014] (II) Module dri2: vendor="X.Org Foundation"
[ 1125.014] compiled for 1.10.3.901, module version = 1.2.0
[ 1125.014] ABI class: X.Org Server Extension, version 5.0
[ 1125.014] (II) Loading extension DRI2
[ 1125.014] (==) Matched intel as autoconfigured driver 0
[ 1125.014] (==) Matched vesa as autoconfigured driver 1
[ 1125.014] (==) Matched fbdev as autoconfigured driver 2
[ 1125.014] (==) Assigned the driver to the xf86ConfigLayout
[ 1125.014] (II) LoadModule: "intel"
[ 1125.014] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1125.014] (II) Module intel: vendor="X.Org Foundation"
[ 1125.014] compiled for 1.10.2, module version = 2.15.0
[ 1125.014] Module class: X.Org Video Driver
[ 1125.014] ABI class: X.Org Video Driver, version 10.0
[ 1125.014] (II) LoadModule: "vesa"
[ 1125.014] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 1125.014] (II) Module vesa: vendor="X.Org Foundation"
[ 1125.015] compiled for 1.10.0, module version = 2.3.0
[ 1125.015] Module class: X.Org Video Driver
[ 1125.015] ABI class: X.Org Video Driver, version 10.0
[ 1125.015] (II) LoadModule: "fbdev"
[ 1125.015] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1125.015] (II) Module fbdev: vendor="X.Org Foundation"
[ 1125.015] compiled for 1.10.0, module version = 0.4.2
[ 1125.015] ABI class: X.Org Video Driver, version 10.0
[ 1125.015] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1125.015] (II) VESA: driver for VESA chipsets: vesa
[ 1125.015] (II) FBDEV: driver for framebuffer: fbdev
[ 1125.015] (++) using VT number 7
[ 1125.023] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1125.023] (WW) Falling back to old probe method for vesa
[ 1125.023] (WW) Falling back to old probe method for fbdev
[ 1125.023] (II) Loading sub module "fbdevhw"
[ 1125.023] (II) LoadModule: "fbdevhw"
[ 1125.023] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1125.023] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1125.023] compiled for 1.10.3.901, module version = 0.0.2
[ 1125.023] ABI class: X.Org Video Driver, version 10.0
[ 1125.023] drmOpenDevice: node name is /dev/dri/card0
[ 1125.039] drmOpenDevice: open result is 8, (OK)
[ 1125.039] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 1125.039] drmOpenDevice: node name is /dev/dri/card0
[ 1125.039] drmOpenDevice: open result is 8, (OK)
[ 1125.039] drmOpenByBusid: drmOpenMinor returns 8
[ 1125.039] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 1125.039] drmOpenDevice: node name is /dev/dri/card1
[ 1125.039] drmOpenDevice: open result is 8, (OK)
[ 1125.039] drmOpenByBusid: drmOpenMinor returns 8
[ 1125.039] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 1125.039] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1125.039] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1125.039] (==) intel(0): RGB weight 888
[ 1125.039] (==) intel(0): Default visual is TrueColor
[ 1125.039] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 1125.039] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 1125.039] (**) intel(0): Relaxed fencing enabled
[ 1125.039] (**) intel(0): Framebuffer tiled
[ 1125.039] (**) intel(0): Pixmaps tiled
[ 1125.039] (**) intel(0): 3D buffers tiled
[ 1125.039] (**) intel(0): SwapBuffers wait enabled
[ 1125.039] (==) intel(0): video overlay key set to 0x101fe
[ 1125.040] (II) intel(0): Output LVDS1 has no monitor section
[ 1125.040] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 1125.040] (II) intel(0): Output VGA1 has no monitor section
[ 1125.064] (II) intel(0): Output HDMI1 has no monitor section
[ 1125.103] (II) intel(0): Output DP1 has no monitor section
[ 1125.103] (II) intel(0): EDID for output LVDS1
[ 1125.103] (II) intel(0): Manufacturer: AUO Model: 13ed Serial#: 0
[ 1125.103] (II) intel(0): Year: 2008 Week: 0
[ 1125.103] (II) intel(0): EDID Version: 1.4
[ 1125.103] (II) intel(0): Digital Display Input
[ 1125.103] (II) intel(0): 6 bits per channel
[ 1125.103] (II) intel(0): Digital interface is undefined
[ 1125.103] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 1125.103] (II) intel(0): Gamma: 2.20
[ 1125.103] (II) intel(0): No DPMS capabilities specified
[ 1125.103] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 1125.103] (II) intel(0): First detailed timing is preferred mode
[ 1125.103] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 1125.103] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 1125.103] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 1125.103] (II) intel(0): Manufacturer's mask: 0
[ 1125.103] (II) intel(0): Supported detailed timing:
[ 1125.103] (II) intel(0): clock: 149.8 MHz Image Size: 344 x 193 mm
[ 1125.103] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end 2028 h_blank_end 2040 h_border: 0
[ 1125.103] (II) intel(0): v_active: 1080 v_sync: 1092 v_sync_end 1104 v_blanking: 1223 v_border: 0
[ 1125.103] (II) intel(0): Unknown vendor-specific block f
[ 1125.103] (II) intel(0): AUO
[ 1125.103] (II) intel(0): B156HW01 V3
[ 1125.103] (II) intel(0): EDID (in hex):
[ 1125.103] (II) intel(0): 00ffffffffffff0006afed1300000000
[ 1125.103] (II) intel(0): 001201049022137802c8959e57549226
[ 1125.103] (II) intel(0): 0f505400000001010101010101010101
[ 1125.103] (II) intel(0): 010101010101843a807870388f403c30
[ 1125.103] (II) intel(0): cc0058c1100000180000000f00000000
[ 1125.103] (II) intel(0): 00000000000000000020000000fe0041
[ 1125.103] (II) intel(0): 554f0a202020202020202020000000fe
[ 1125.103] (II) intel(0): 004231353648573031205633200a0049
[ 1125.103] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1125.103] (II) intel(0): Printing DDC gathered Modelines:
[ 1125.103] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1125.103] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1125.103] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1125.103] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1125.103] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1125.103] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1125.103] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1125.103] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1125.103] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1125.104] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1125.104] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1125.104] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1125.104] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1125.104] (II) intel(0): Printing probed modes for output LVDS1
[ 1125.104] (II) intel(0): Modeline "1920x1080"x60.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1125.104] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
[ 1125.104] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 1125.104] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 1125.104] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 1125.104] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 1125.104] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 1125.104] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 1125.104] (II) intel(0): EDID for output VGA1
[ 1125.127] (II) intel(0): EDID for output HDMI1
[ 1125.166] (II) intel(0): EDID for output DP1
[ 1125.166] (II) intel(0): Output LVDS1 connected
[ 1125.166] (II) intel(0): Output VGA1 disconnected
[ 1125.166] (II) intel(0): Output HDMI1 disconnected
[ 1125.166] (II) intel(0): Output DP1 disconnected
[ 1125.166] (II) intel(0): Using exact sizes for initial modes
[ 1125.166] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[ 1125.166] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1125.166] (II) intel(0): Kernel page flipping support detected, enabling
[ 1125.166] (**) intel(0): Display dimensions: (340, 190) mm
[ 1125.166] (**) intel(0): DPI set to (143, 144)
[ 1125.166] (II) Loading sub module "fb"
[ 1125.166] (II) LoadModule: "fb"
[ 1125.167] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1125.167] (II) Module fb: vendor="X.Org Foundation"
[ 1125.167] compiled for 1.10.3.901, module version = 1.0.0
[ 1125.167] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1125.167] (II) Loading sub module "dri2"
[ 1125.167] (II) LoadModule: "dri2"
[ 1125.167] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1125.167] (II) Module dri2: vendor="X.Org Foundation"
[ 1125.167] compiled for 1.10.3.901, module version = 1.2.0
[ 1125.167] ABI class: X.Org Server Extension, version 5.0
[ 1125.167] (II) UnloadModule: "vesa"
[ 1125.167] (II) Unloading vesa
[ 1125.167] (II) UnloadModule: "fbdev"
[ 1125.167] (II) Unloading fbdev
[ 1125.167] (II) UnloadModule: "fbdevhw"
[ 1125.167] (II) Unloading fbdevhw
[ 1125.167] (==) Depth 24 pixmap format is 32 bpp
[ 1125.167] (II) intel(0): [DRI2] Setup complete
[ 1125.167] (II) intel(0): [DRI2] DRI driver: i965
[ 1125.167] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 1125.168] (II) UXA(0): Driver registered support for the following operations:
[ 1125.168] (II) solid
[ 1125.168] (II) copy
[ 1125.168] (II) composite (RENDER acceleration)
[ 1125.168] (II) put_image
[ 1125.168] (II) get_image
[ 1125.168] (==) intel(0): Backing store disabled
[ 1125.168] (==) intel(0): Silken mouse enabled
[ 1125.168] (II) intel(0): Initializing HW Cursor
[ 1125.230] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1125.341] (==) intel(0): DPMS enabled
[ 1125.341] (==) intel(0): Intel XvMC decoder enabled
[ 1125.341] (II) intel(0): Set up textured video
[ 1125.341] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1125.341] (II) intel(0): direct rendering: DRI2 Enabled
[ 1125.341] (==) intel(0): hotplug detection: "enabled"
[ 1125.341] (--) RandR disabled
[ 1125.341] (II) Initializing built-in extension Generic Event Extension
[ 1125.341] (II) Initializing built-in extension SHAPE
[ 1125.341] (II) Initializing built-in extension MIT-SHM
[ 1125.341] (II) Initializing built-in extension XInputExtension
[ 1125.341] (II) Initializing built-in extension XTEST
[ 1125.341] (II) Initializing built-in extension BIG-REQUESTS
[ 1125.341] (II) Initializing built-in extension SYNC
[ 1125.341] (II) Initializing built-in extension XKEYBOARD
[ 1125.341] (II) Initializing built-in extension XC-MISC
[ 1125.341] (II) Initializing built-in extension SECURITY
[ 1125.341] (II) Initializing built-in extension XINERAMA
[ 1125.341] (II) Initializing built-in extension XFIXES
[ 1125.341] (II) Initializing built-in extension RENDER
[ 1125.341] (II) Initializing built-in extension RANDR
[ 1125.341] (II) Initializing built-in extension COMPOSITE
[ 1125.341] (II) Initializing built-in extension DAMAGE
[ 1125.349] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1125.349] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1125.349] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1125.349] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 1125.349] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1125.349] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 1125.349] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1125.350] (II) intel(0): Setting screen physical size to 508 x 285
[ 1125.436] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1125.436] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1125.436] (II) LoadModule: "evdev"
[ 1125.437] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.437] (II) Module evdev: vendor="X.Org Foundation"
[ 1125.437] compiled for 1.10.0, module version = 2.6.0
[ 1125.437] Module class: X.Org XInput Driver
[ 1125.437] ABI class: X.Org XInput driver, version 12.2
[ 1125.437] (II) Using input driver 'evdev' for 'Power Button'
[ 1125.437] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.437] (**) Power Button: always reports core events
[ 1125.437] (**) Power Button: Device: "/dev/input/event4"
[ 1125.437] (--) Power Button: Found keys
[ 1125.437] (II) Power Button: Configuring as keyboard
[ 1125.437] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 1125.437] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1125.437] (**) Option "xkb_rules" "evdev"
[ 1125.437] (**) Option "xkb_model" "evdev"
[ 1125.437] (**) Option "xkb_layout" "us"
[ 1125.461] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 1125.462] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1125.462] (II) Using input driver 'evdev' for 'Video Bus'
[ 1125.462] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.462] (**) Video Bus: always reports core events
[ 1125.462] (**) Video Bus: Device: "/dev/input/event11"
[ 1125.462] (--) Video Bus: Found keys
[ 1125.462] (II) Video Bus: Configuring as keyboard
[ 1125.462] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event11"
[ 1125.462] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 1125.462] (**) Option "xkb_rules" "evdev"
[ 1125.462] (**) Option "xkb_model" "evdev"
[ 1125.462] (**) Option "xkb_layout" "us"
[ 1125.463] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 1125.463] (II) No input driver/identifier specified (ignoring)
[ 1125.465] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 1125.465] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1125.465] (II) Using input driver 'evdev' for 'Video Bus'
[ 1125.465] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.465] (**) Video Bus: always reports core events
[ 1125.465] (**) Video Bus: Device: "/dev/input/event10"
[ 1125.465] (--) Video Bus: Found keys
[ 1125.465] (II) Video Bus: Configuring as keyboard
[ 1125.465] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input10/event10"
[ 1125.465] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 1125.465] (**) Option "xkb_rules" "evdev"
[ 1125.465] (**) Option "xkb_model" "evdev"
[ 1125.465] (**) Option "xkb_layout" "us"
[ 1125.476] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1125.476] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1125.476] (II) Using input driver 'evdev' for 'Power Button'
[ 1125.476] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.476] (**) Power Button: always reports core events
[ 1125.476] (**) Power Button: Device: "/dev/input/event3"
[ 1125.476] (--) Power Button: Found keys
[ 1125.476] (II) Power Button: Configuring as keyboard
[ 1125.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 1125.476] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1125.476] (**) Option "xkb_rules" "evdev"
[ 1125.476] (**) Option "xkb_model" "evdev"
[ 1125.476] (**) Option "xkb_layout" "us"
[ 1125.480] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event7)
[ 1125.480] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall"
[ 1125.480] (II) Using input driver 'evdev' for 'HP TrueVision HD'
[ 1125.480] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.480] (**) HP TrueVision HD: always reports core events
[ 1125.480] (**) HP TrueVision HD: Device: "/dev/input/event7"
[ 1125.480] (--) HP TrueVision HD: Found keys
[ 1125.480] (II) HP TrueVision HD: Configuring as keyboard
[ 1125.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7/event7"
[ 1125.480] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD)
[ 1125.480] (**) Option "xkb_rules" "evdev"
[ 1125.480] (**) Option "xkb_model" "evdev"
[ 1125.481] (**) Option "xkb_layout" "us"
[ 1125.481] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 1125.482] (II) No input driver/identifier specified (ignoring)
[ 1125.482] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Front Jack (/dev/input/event13)
[ 1125.482] (II) No input driver/identifier specified (ignoring)
[ 1125.482] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Front Jack (/dev/input/event14)
[ 1125.483] (II) No input driver/identifier specified (ignoring)
[ 1125.483] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event15)
[ 1125.483] (II) No input driver/identifier specified (ignoring)
[ 1125.486] (II) config/udev: Adding input device Dynex 5-Button Wired Optical Mouse (/dev/input/event1)
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1125.486] (II) Using input driver 'evdev' for 'Dynex 5-Button Wired Optical Mouse'
[ 1125.486] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: always reports core events
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: Device: "/dev/input/event1"
[ 1125.486] (--) Dynex 5-Button Wired Optical Mouse: Found 9 mouse buttons
[ 1125.486] (--) Dynex 5-Button Wired Optical Mouse: Found scroll wheel(s)
[ 1125.486] (--) Dynex 5-Button Wired Optical Mouse: Found relative axes
[ 1125.486] (--) Dynex 5-Button Wired Optical Mouse: Found x and y relative axes
[ 1125.486] (II) Dynex 5-Button Wired Optical Mouse: Configuring as mouse
[ 1125.486] (II) Dynex 5-Button Wired Optical Mouse: Adding scrollwheel support
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1125.486] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:19:00.0/usb2/2-1/2-1:1.0/input/input1/event1"
[ 1125.486] (II) XINPUT: Adding extended input device "Dynex 5-Button Wired Optical Mouse" (type: MOUSE)
[ 1125.486] (II) Dynex 5-Button Wired Optical Mouse: initialized for relative axes.
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: (accel) keeping acceleration scheme 1
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: (accel) acceleration profile 0
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: (accel) acceleration factor: 2.000
[ 1125.486] (**) Dynex 5-Button Wired Optical Mouse: (accel) acceleration threshold: 4
[ 1125.486] (II) config/udev: Adding input device Dynex 5-Button Wired Optical Mouse (/dev/input/mouse0)
[ 1125.486] (II) No input driver/identifier specified (ignoring)
[ 1125.490] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1125.490] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1125.490] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1125.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.490] (**) AT Translated Set 2 keyboard: always reports core events
[ 1125.490] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1125.491] (--) AT Translated Set 2 keyboard: Found keys
[ 1125.491] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1125.491] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1125.491] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 1125.491] (**) Option "xkb_rules" "evdev"
[ 1125.491] (**) Option "xkb_model" "evdev"
[ 1125.491] (**) Option "xkb_layout" "us"
[ 1125.491] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 1125.491] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1125.491] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1125.491] (II) LoadModule: "synaptics"
[ 1125.491] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1125.491] (II) Module synaptics: vendor="X.Org Foundation"
[ 1125.491] compiled for 1.10.2, module version = 1.4.1
[ 1125.491] Module class: X.Org XInput Driver
[ 1125.491] ABI class: X.Org XInput driver, version 12.2
[ 1125.491] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1125.491] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1125.491] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1125.491] (**) Option "Device" "/dev/input/event8"
[ 1125.573] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5756
[ 1125.573] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4868
[ 1125.573] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1125.573] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1125.573] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1125.573] (**) Option "EmulateTwoFingerMinZ" "0"
[ 1125.573] (**) Option "HorizEdgeScroll" "on"
[ 1125.573] (**) Option "VertTwoFingerScroll" "on"
[ 1125.573] (**) Option "HorizTwoFingerScroll" "on"
[ 1125.573] (**) Option "TapButton1" "1"
[ 1125.573] (**) Option "TapButton2" "2"
[ 1125.573] (**) Option "TapButton3" "3"
[ 1125.573] (**) Option "CircularScrolling" "on"
[ 1125.573] (**) Option "CircScrollTrigger" "2"
[ 1125.573] (**) Option "CircScrollDelta" "0.1"
[ 1125.679] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1125.680] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1125.786] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 1125.786] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 1125.786] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1125.786] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 1125.786] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 1125.786] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1125.786] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1125.787] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1125.787] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1125.787] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1125.787] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 1125.787] (II) No input driver/identifier specified (ignoring)
[ 1125.787] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event9)
[ 1125.787] (II) No input driver/identifier specified (ignoring)
[ 1125.787] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 1125.787] (II) No input driver/identifier specified (ignoring)
[ 1125.788] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 1125.788] (II) No input driver/identifier specified (ignoring)
[ 1125.789] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[ 1125.789] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 1125.789] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 1125.789] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1125.789] (**) HP WMI hotkeys: always reports core events
[ 1125.789] (**) HP WMI hotkeys: Device: "/dev/input/event5"
[ 1125.789] (--) HP WMI hotkeys: Found keys
[ 1125.789] (II) HP WMI hotkeys: Configuring as keyboard
[ 1125.789] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 1125.789] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 1125.789] (**) Option "xkb_rules" "evdev"
[ 1125.789] (**) Option "xkb_model" "evdev"
[ 1125.789] (**) Option "xkb_layout" "us"
[ 1125.801] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1125.801] (II) intel(0): Printing DDC gathered Modelines:
[ 1125.801] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1125.971] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1125.971] (II) intel(0): Printing DDC gathered Modelines:
[ 1125.971] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1126.034] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1126.034] (II) intel(0): Printing DDC gathered Modelines:
[ 1126.034] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1126.097] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1126.097] (II) intel(0): Printing DDC gathered Modelines:
[ 1126.097] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1126.160] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1126.160] (II) intel(0): Printing DDC gathered Modelines:
[ 1126.161] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1130.995] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1130.995] (II) intel(0): Printing DDC gathered Modelines:
[ 1130.995] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1131.057] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1131.057] (II) intel(0): Printing DDC gathered Modelines:
[ 1131.057] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1131.121] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1131.121] (II) intel(0): Printing DDC gathered Modelines:
[ 1131.121] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1131.465] (II) intel(0): EDID vendor "AUO", prod id 5101
[ 1131.465] (II) intel(0): Printing DDC gathered Modelines:
[ 1131.465] (II) intel(0): Modeline "1920x1080"x0.0 149.80 1920 1980 2028 2040 1080 1092 1104 1223 -hsync -vsync (73.4 kHz)
[ 1132.136] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 67170 < target_msc 67171
[ 1132.150] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 67172 < target_msc 67173
[ 1132.308] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 67181 < target_msc 67182
[ 1132.333] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 67183 < target_msc 67184
[ 1132.349] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 67184 < target_msc 67185
It seems like it only crashes when I am using Firefox.
I started the gdm from the console but now, I'm starting to wonder if Gnome really crashes since when it seems to crash, it doesn't bring me back to the console. I'm not sure how to stop Gnome when it's running so I couldn't see if there were any error messages on the console.
The following commands did not work:
/etc/init.d/gdm stop
/etc/init.d/xdm stop
Last edited by Apos (2011-09-19 20:32:13) -
I'm rather new to Arch Linux, but so far I'm really liking it. I've been using Debian and Fedora before.
My install went fine but I'm having problems getting xorg to recognize my Video Card drivers.
I'm running a ATI Radeon 9600 on Xorg. I downloaded the fglrx drivers (4.3) from ATI and unpacked the rpms (a file format I hope never to use again ) and installed locally. I also made a new xorg.conf to go along with it but it seems it can't initilize. Please help.
Here is my xorg.conf
# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
....legal stuff....
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# DRI Section
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 80.5
VertRefresh 50 - 70
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:3:0:0" # vendor=1002, device=4152
Screen 0
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.1)
I'm not quite sure why this is showing Mesa because I have it removed. :?
And here is what happens when I run fgl_glxgears:
X Error of failed request: GLXUnsupportedPrivateRequest
Major opcode of failed request: 143 (GLX)
Minor opcode of failed request: 16 (X_GLXVendorPrivate)
Serial number of failed request: 23
Current serial number in output stream: 25Originally I did get that error. I was able to stop the error and get dri to load properly (so my x log says). I do not remember exacly how I fixed the error I've been making changes, and gl apps no linger crash x, just themselves. Here is my xorg.conf
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mouse0"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Buttons" "3"
Option "ZaxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
Option "DPMS"
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.c
#Option "backingstore" "true"
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "fglrx"
BoardName "Unknown Board"
Option "no_accel" "no"
Option "no_dri" "no"
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "VideoOverlay" "no"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:5:0"
VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1680x1050"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1680x1050"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1680x1050"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "Composite" "Enable"
# Option "RENDER" "Enable"
#EndSection
And my X log
[code]
X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.6.8.1 i686 [ELF]
Current Operating System: Linux meh 2.6.8.1 #1 SMP Sun Aug 22 16:44:06 PDT 2004 i686
Build Date: 18 September 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 2 09:54:20 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8002180c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5833 card 1002,1234 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5838 card 1002,5838 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:13:0: chip 1002,4347 card 1002,434c rev 01 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4348 card 1002,434c rev 01 class 0c,03,10 hdr 00
(II) PCI: 00:14:0: chip 1002,4353 card 103c,006b rev 16 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4349 card 1002,4349 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,434c card 1002,434c rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4342 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:14:5: chip 1002,4341 card 103c,006b rev 00 class 04,01,00 hdr 80
(II) PCI: 00:14:6: chip 1002,434d card 103c,006b rev 01 class 07,03,00 hdr 80
(II) PCI: 01:05:0: chip 1002,4e50 card 103c,006b rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 104c,8026 card 103c,006b rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:02:0: chip 14e4,4301 card 103c,12f3 rev 02 class 02,80,00 hdr 00
(II) PCI: 02:03:0: chip 10ec,8139 card 103c,006b rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 104c,ac54 card 4000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 02:04:1: chip 104c,ac54 card 4800,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 02:04:2: chip 104c,8201 card 103c,006b rev 01 class 08,80,00 hdr 00
(II) PCI: 02:07:0: chip 1033,0035 card 1033,0035 rev 43 class 0c,03,10 hdr 80
(II) PCI: 02:07:1: chip 1033,0035 card 1033,0035 rev 43 class 0c,03,10 hdr 00
(II) PCI: 02:07:2: chip 1033,00e0 card 1033,00e0 rev 04 class 0c,03,20 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8100000 - 0xe81fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe8200000 - 0xe82fffff (0x100000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:4:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:4:1), (2,7,10), BCTRL: 0x05c0 (VGA_EN is cleared)
(--) PCI:*(1:5:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xf0000000/27, 0xe8100000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xea000000 from 0xebffffff to 0xe9ffffff
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xe8000fff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe8208c00 - 0xe8208cff (0x100) MX[B]
[1] -1 0 0xe8207000 - 0xe8207fff (0x1000) MX[B]
[2] -1 0 0xe8206000 - 0xe8206fff (0x1000) MX[B]
[3] -1 0 0xe8208800 - 0xe82088ff (0x100) MX[B]
[4] -1 0 0xe8204000 - 0xe8205fff (0x2000) MX[B]
[5] -1 0 0xe8200000 - 0xe8203fff (0x4000) MX[B]
[6] -1 0 0xe8208000 - 0xe82087ff (0x800) MX[B]
[7] -1 0 0xe8003400 - 0xe80034ff (0x100) MX[B]
[8] -1 0 0xe8003000 - 0xe80030ff (0x100) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[11] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[13] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[14] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000a400 - 0x0000a43f (0x40) IX[B]
[17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[18] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[20] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[24] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe8208c00 - 0xe8208cff (0x100) MX[B]
[1] -1 0 0xe8207000 - 0xe8207fff (0x1000) MX[B]
[2] -1 0 0xe8206000 - 0xe8206fff (0x1000) MX[B]
[3] -1 0 0xe8208800 - 0xe82088ff (0x100) MX[B]
[4] -1 0 0xe8204000 - 0xe8205fff (0x2000) MX[B]
[5] -1 0 0xe8200000 - 0xe8203fff (0x4000) MX[B]
[6] -1 0 0xe8208000 - 0xe82087ff (0x800) MX[B]
[7] -1 0 0xe8003400 - 0xe80034ff (0x100) MX[B]
[8] -1 0 0xe8003000 - 0xe80030ff (0x100) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[11] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[13] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[14] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[16] -1 0 0x0000a400 - 0x0000a43f (0x40) IX[B]
[17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[18] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[20] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[24] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8208c00 - 0xe8208cff (0x100) MX[B]
[6] -1 0 0xe8207000 - 0xe8207fff (0x1000) MX[B]
[7] -1 0 0xe8206000 - 0xe8206fff (0x1000) MX[B]
[8] -1 0 0xe8208800 - 0xe82088ff (0x100) MX[B]
[9] -1 0 0xe8204000 - 0xe8205fff (0x2000) MX[B]
[10] -1 0 0xe8200000 - 0xe8203fff (0x4000) MX[B]
[11] -1 0 0xe8208000 - 0xe82087ff (0x800) MX[B]
[12] -1 0 0xe8003400 - 0xe80034ff (0x100) MX[B]
[13] -1 0 0xe8003000 - 0xe80030ff (0x100) MX[B]
[14] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[15] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[16] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[17] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[18] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[19] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[20] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000a400 - 0x0000a43f (0x40) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[25] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[27] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[30] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[31] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.12.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AS (Fire GL T2), ATI RV350 AT (Fire GL T2),
ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2),
ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800),
ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10), ATI R420 JH,
ATI R420 JI, ATI R420 JJ, ATI R420 JK, ATI R420 JL, ATI R420 JM,
ATI R420 JN, ATI R420 JP, ATI RS300 IGP, ATI RS350 IGP
(II) Primary Device is: PCI 01:05:0
(--) Chipset ATI RV350 NP (M10) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8208c00 - 0xe8208cff (0x100) MX[B]
[6] -1 0 0xe8207000 - 0xe8207fff (0x1000) MX[B]
[7] -1 0 0xe8206000 - 0xe8206fff (0x1000) MX[B]
[8] -1 0 0xe8208800 - 0xe82088ff (0x100) MX[B]
[9] -1 0 0xe8204000 - 0xe8205fff (0x2000) MX[B]
[10] -1 0 0xe8200000 - 0xe8203fff (0x4000) MX[B]
[11] -1 0 0xe8208000 - 0xe82087ff (0x800) MX[B]
[12] -1 0 0xe8003400 - 0xe80034ff (0x100) MX[B]
[13] -1 0 0xe8003000 - 0xe80030ff (0x100) MX[B]
[14] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[15] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[16] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[17] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[18] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[19] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[20] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000a400 - 0x0000a43f (0x40) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[25] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[27] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[30] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[31] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8219538
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8208c00 - 0xe8208cff (0x100) MX[B]
[6] -1 0 0xe8207000 - 0xe8207fff (0x1000) MX[B]
[7] -1 0 0xe8206000 - 0xe8206fff (0x1000) MX[B]
[8] -1 0 0xe8208800 - 0xe82088ff (0x100) MX[B]
[9] -1 0 0xe8204000 - 0xe8205fff (0x2000) MX[B]
[10] -1 0 0xe8200000 - 0xe8203fff (0x4000) MX[B]
[11] -1 0 0xe8208000 - 0xe82087ff (0x800) MX[B]
[12] -1 0 0xe8003400 - 0xe80034ff (0x100) MX[B]
[13] -1 0 0xe8003000 - 0xe80030ff (0x100) MX[B]
[14] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[15] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[16] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[17] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[18] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[19] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[20] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[26] -1 0 0x0000a400 - 0x0000a43f (0x40) IX[B]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[28] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[29] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[30] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[31] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[33] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[34] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 5 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "no"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI RV350 NP (M10)" (Chipset = 0x4e50)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x006b)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
(--) fglrx(0): MMIO registers at 0xe8100000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x0C
(II) fglrx(0): Video RAM override, using 131072 kB instead of 131072 kB
(**) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
Monitor -- LVDS
Connector -- None
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- NONE
(II) fglrx(0): Secondary head:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: SEC
(II) fglrx(0): Panel Size from BIOS: 1680x1050
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Valid mode using on-chip RMX: 1680x1050
(II) fglrx(0): Total 1 valid mode(s) found.
(--) fglrx(0): Virtual size is 1680x1050 (pitch 1728)
(**) fglrx(0): *Mode "1680x1050": 121.0 MHz (scaled from 0.0 MHz), 64.6 kHz, 60.7 Hz
(II) fglrx(0): Modeline "1680x1050" 121.00 1680 1704 1792 1872 1050 1051 1054 1065
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.12.0
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000bb8
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8100000 - 0xe810ffff (0x10000) MX[B]
[1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe8208c00 - 0xe8208cff (0x100) MX[B]
[8] -1 0 0xe8207000 - 0xe8207fff (0x1000) MX[B]
[9] -1 0 0xe8206000 - 0xe8206fff (0x1000) MX[B]
[10] -1 0 0xe8208800 - 0xe82088ff (0x100) MX[B]
[11] -1 0 0xe8204000 - 0xe8205fff (0x2000) MX[B]
[12] -1 0 0xe8200000 - 0xe8203fff (0x4000) MX[B]
[13] -1 0 0xe8208000 - 0xe82087ff (0x800) MX[B]
[14] -1 0 0xe8003400 - 0xe80034ff (0x100) MX[B]
[15] -1 0 0xe8003000 - 0xe80030ff (0x100) MX[B]
[16] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[17] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[18] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[19] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[20] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[21] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[22] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[23] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[24] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[25] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[26] 0 0 0x00009000 - 0x000090ff (0x100) IX[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[29] -1 0 0x0000a400 - 0x0000a43f (0x40) IX[B]
[30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[31] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[32] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[33] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[34] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[36] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[37] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xf08f6000 (size=0x0770a000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
( -
Hey all,
To start, i've been running arch for a few months now, and loving it. Haven't posted much on the forums though, but starting today i'd like to change that.
I have, since initially installing, been playing around with trying to get my radeon 9200SE videocard working at 100%, but right now glxgears only comes out at about 200fps.
Here's the issue:
I can get the fglrx driver to compile & install (using the wiki on creating the packages in 2.6).
I am running a customized 2.6.9 kernel as some other hardware i have requires 2.6.9 or lower at the moment (waiting on better drivers).
So, I can get the fglrx to modprobe, and can start xorg 6.8.2-2 just fine. I have also been over the Xorg.0.log file, and found no errors anywhere, by all accounts it should be working properly.
BUT
as soon as i run fglrxinfo, i find out the MESA drivers are what's running. I have tried new kernal compiles, including cutting out kernel DRM support completely, but that didn't change anything.
As of right now, the kernel has agp and drm compiled as modules.
I have also resorted to wiping the entire system and starting fresh, which is where I am now. Basically, i have xorg, enlightenment WM, and firefox on the system right now. I was hoping the wipe would correct whatever problem is causing this to happen, but it didn't.
I have also read that it may be my Xorg 6.8.2, but the fglrx drivers i used during the install (latest) claim to be FOR 6.8.x, so i figured that shouldn't be a problem anymore. Plus, i can't find a package for the earlier Xorg 6.7.x, so i haven't tried it.
I hope this all makes sense, cause i'm completely stumped on this one...
The following post will contain all log files and info i can track down on how the system currently sits.
If there is anyone that has seen or heard of this, or anyone who could take a minute and look over my logs/config files and see if there's something simple i'm missing, i would REALLY appreciate it.
TIA,
-s_mCard: ATI Radeon 9200SE
Kernel: 2.6.9 from kernel.org, with some scsi driver patches. Current kernel has both DRM and AGP compiled as module.
Xorg: 6.8.2-2 (latest)
lsmod (with irrelevant modules removed)
fglrx 243356 7
nvidia_agp 8348 1
agpgart 35628 2 nvidia_agp
xorg.conf
# DRI Section
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/usbmouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 80.5
VertRefresh 60 - 85
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0" # vendor=1002, device=5964
Screen 0
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "800x600" "1024x768" "1280x1024"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Xorg.0.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/MORBO:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.10-ARCH i686 [ELF]
Current Operating System: Linux MORBO 2.6.9 #3 SMP Wed Jun 8 15:23:01 PDT 2005 i686
Build Date: 16 February 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 8 17:15:32 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/$
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1458,0c11 rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1458,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1458,5004 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1458,5004 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1458,5004 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,006a card 1458,a002 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1458,5002 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:06:0: chip 1186,1300 card 1186,1300 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:07:0: chip 109e,036e card 1002,0001 rev 11 class 04,00,00 hdr 80
(II) PCI: 01:07:1: chip 109e,0878 card 1002,0001 rev 11 class 04,80,00 hdr 80
(II) PCI: 01:0c:0: chip 1283,8212 card 1283,0001 rev 10 class 01,04,00 hdr 00
(II) PCI: 01:0e:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:00:0: chip 1002,5964 card 1043,c008 rev 01 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,5d44 card 1043,c009 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x0000bfff (0x3000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd7000000 - 0xd8ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd5000000 - 0xd6ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(--) PCI: (1:7:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xd4000000/12
(--) PCI:*(2:0:0) ATI Technologies Inc unknown chipset (0x5964) rev 1, Mem @ 0xc0000000/27, 0xd6000000/16, I/O @ 0xc000/8
(--) PCI: (2:0:1) ATI Technologies Inc unknown chipset (0x5d44) rev 1, Mem @ 0xc8000000/27, 0xd6010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd8000000 - 0xd8003fff (0x4000) MX[B]
[1] -1 0 0xd8005000 - 0xd80057ff (0x800) MX[B]
[2] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
[3] -1 0 0xd8006000 - 0xd80060ff (0x100) MX[B]
[4] -1 0 0xd9000000 - 0xd9000fff (0x1000) MX[B]
[5] -1 0 0xd9004000 - 0xd90040ff (0x100) MX[B]
[6] -1 0 0xd9003000 - 0xd9003fff (0x1000) MX[B]
[7] -1 0 0xd9002000 - 0xd9002fff (0x1000) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xd6010000 - 0xd601ffff (0x10000) MX[B](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[11] -1 0 0xd6000000 - 0xd600ffff (0x10000) MX[B](B)
[12] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
[14] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[15] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[16] -1 0 0x00009c10 - 0x00009c17 (0x8) IX[B]
[17] -1 0 0x00009800 - 0x00009803 (0x4) IX[B]
[18] -1 0 0x00009410 - 0x00009417 (0x8) IX[B]
[19] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
[22] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8000000 - 0xd8003fff (0x4000) MX[B]
[1] -1 0 0xd8005000 - 0xd80057ff (0x800) MX[B]
[2] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
[3] -1 0 0xd8006000 - 0xd80060ff (0x100) MX[B]
[4] -1 0 0xd9000000 - 0xd9000fff (0x1000) MX[B]
[5] -1 0 0xd9004000 - 0xd90040ff (0x100) MX[B]
[6] -1 0 0xd9003000 - 0xd9003fff (0x1000) MX[B]
[7] -1 0 0xd9002000 - 0xd9002fff (0x1000) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xd6010000 - 0xd601ffff (0x10000) MX[B](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[11] -1 0 0xd6000000 - 0xd600ffff (0x10000) MX[B](B)
[12] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
[14] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[15] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[16] -1 0 0x00009c10 - 0x00009c17 (0x8) IX[B]
[17] -1 0 0x00009800 - 0x00009803 (0x4) IX[B]
[18] -1 0 0x00009410 - 0x00009417 (0x8) IX[B]
[19] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
[22] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd8003fff (0x4000) MX[B]
[6] -1 0 0xd8005000 - 0xd80057ff (0x800) MX[B]
[7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
[8] -1 0 0xd8006000 - 0xd80060ff (0x100) MX[B]
[9] -1 0 0xd9000000 - 0xd9000fff (0x1000) MX[B]
[10] -1 0 0xd9004000 - 0xd90040ff (0x100) MX[B]
[11] -1 0 0xd9003000 - 0xd9003fff (0x1000) MX[B]
[12] -1 0 0xd9002000 - 0xd9002fff (0x1000) MX[B]
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[14] -1 0 0xd6010000 - 0xd601ffff (0x10000) MX[B](B)
[15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0 0xd6000000 - 0xd600ffff (0x10000) MX[B](B)
[17] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[18] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[22] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[23] -1 0 0x00009c10 - 0x00009c17 (0x8) IX[B]
[24] -1 0 0x00009800 - 0x00009803 (0x4) IX[B]
[25] -1 0 0x00009410 - 0x00009417 (0x8) IX[B]
[26] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[28] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
[29] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.12.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152),
MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64),
MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 02:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset RADEON 9200 SE (RV280 5964) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd8003fff (0x4000) MX[B]
[6] -1 0 0xd8005000 - 0xd80057ff (0x800) MX[B]
[7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
[8] -1 0 0xd8006000 - 0xd80060ff (0x100) MX[B]
[9] -1 0 0xd9000000 - 0xd9000fff (0x1000) MX[B]
[10] -1 0 0xd9004000 - 0xd90040ff (0x100) MX[B]
[11] -1 0 0xd9003000 - 0xd9003fff (0x1000) MX[B]
[12] -1 0 0xd9002000 - 0xd9002fff (0x1000) MX[B]
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[14] -1 0 0xd6010000 - 0xd601ffff (0x10000) MX[B](B)
[15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0 0xd6000000 - 0xd600ffff (0x10000) MX[B](B)
[17] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[18] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[22] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[23] -1 0 0x00009c10 - 0x00009c17 (0x8) IX[B]
[24] -1 0 0x00009800 - 0x00009803 (0x4) IX[B]
[25] -1 0 0x00009410 - 0x00009417 (0x8) IX[B]
[26] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[28] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
[29] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8218bc0
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd8003fff (0x4000) MX[B]
[6] -1 0 0xd8005000 - 0xd80057ff (0x800) MX[B]
[7] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
[8] -1 0 0xd8006000 - 0xd80060ff (0x100) MX[B]
[9] -1 0 0xd9000000 - 0xd9000fff (0x1000) MX[B]
[10] -1 0 0xd9004000 - 0xd90040ff (0x100) MX[B]
[11] -1 0 0xd9003000 - 0xd9003fff (0x1000) MX[B]
[12] -1 0 0xd9002000 - 0xd9002fff (0x1000) MX[B]
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[14] -1 0 0xd6010000 - 0xd601ffff (0x10000) MX[B](B)
[15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0 0xd6000000 - 0xd600ffff (0x10000) MX[B](B)
[17] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[18] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[25] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[26] -1 0 0x00009c10 - 0x00009c17 (0x8) IX[B]
[27] -1 0 0x00009800 - 0x00009803 (0x4) IX[B]
[28] -1 0 0x00009410 - 0x00009417 (0x8) IX[B]
[29] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[31] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[34] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 SE (RV280 5964)" (Chipset = 0x5964)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0xc008)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xd6000000
(--) fglrx(0): ChipExtRevID = 0x01
(--) fglrx(0): ChipIntRevID = 0x00
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- None
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- NONE
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: OEC Model: 9908 Serial#: 1
(II) fglrx(0): Year: 2002 Week: 7
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate Composite SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 3.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.618 redY: 0.337 greenX: 0.273 greenY: 0.604
(II) fglrx(0): blueX: 0.154 blueY: 0.066 whiteX: 0.281 whiteY: 0.311
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #6: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
(II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 355 x 265 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 8
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 6
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 8 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) fglrx(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) fglrx(0): Modeline "640x350" 25.17 640 656 752 800 350 387 389 449
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (90, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.12.10
ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x00000779
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd6000000 - 0xd600ffff (0x10000) MX[B]
[1] 0 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xd8000000 - 0xd8003fff (0x4000) MX[B]
[8] -1 0 0xd8005000 - 0xd80057ff (0x800) MX[B]
[9] -1 0 0xd4001000 - 0xd4001fff (0x1000) MX[B]
[10] -1 0 0xd8006000 - 0xd80060ff (0x100) MX[B]
[11] -1 0 0xd9000000 - 0xd9000fff (0x1000) MX[B]
[12] -1 0 0xd9004000 - 0xd90040ff (0x100) MX[B]
[13] -1 0 0xd9003000 - 0xd9003fff (0x1000) MX[B]
[14] -1 0 0xd9002000 - 0xd9002fff (0x1000) MX[B]
[15] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[16] -1 0 0xd6010000 - 0xd601ffff (0x10000) MX[B](B)
[17] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[18] -1 0 0xd6000000 - 0xd600ffff (0x10000) MX[B](B)
[19] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[20] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[24] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[27] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B]
[28] -1 0 0x0000a000 - 0x0000a003 (0x4) IX[B]
[29] -1 0 0x00009c10 - 0x00009c17 (0x8) IX[B]
[30] -1 0 0x00009800 - 0x00009803 (0x4) IX[B]
[31] -1 0 0x00009410 - 0x00009417 (0x8) IX[B]
[32] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[34] -1 0 0x0000d400 - 0x0000d47f (0x80) IX[B]
[35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[36] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[37] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xc0701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x
(II) fglrx(0): detected X.org 6.8.2
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No -
Can't seem to install ati-driver opengl libs
Hi there.
I recently recovered from a mis-upgrade to Xfree86-4.4 (using a Radeon 9600, which is unsupported).
Anyways, I just realized that I can't get 3d acceleration working. I did fglrxinfo, and the system says this:
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
According to an FAQ I came across, this is supposed to be the ATI's OpenGL libs.
I have uninstalled and reinstalled Xfree86, did the same with the ATI Drivers, and recompiled the fglrx module multiple times, but it is still the same: no ATI OGL drivers installed.
Can somebody help me? Please?
/scratchkeep it together. keep it together.. :?
OK. Here are my config files:
rc.local and modprobe.conf are empty.
rc.conf (removed the comments)
KEYMAP=us
HARDWARECLOCK="localtime"
MODULES=(!usbserial !ide-scsi
fglrx
usb-ohci
snd-intel8x0
snd-pcm-oss
snd-mixer-oss
snd-seq-oss
nvnet
8211
"dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth1="dhcp"
INTERFACES=(lo eth1 eth0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
DAEMONS=(!pcmcia network crond inetd)
lsmod gives this:
fglrx 173928 0
keybdev 2244 0 (unused)
mousedev 4180 1
hid 21668 0 (unused)
input 3520 0 [keybdev mousedev hid]
8211 63208 1
soundcore 3972 6 [snd]
usb-ohci 18888 0 (unused)
vfat 10732 1 (autoclean)
fat 32568 0 (autoclean) [vfat]
and the big one: xfreeconfig-4:
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontZap"
# Option "Dont Zoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# Option "Protocol" "Xqueue"
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-71
VertRefresh 50-160
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0" # vendor=1002, device=4152
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Thanks for your help.
/scratch -
I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide. -
Error 1920-Service 'Apple Mobile Device' failed to start.
Hi,
When ever I try to install the Apple Mobile Device Support this message shows up "Error 1920-Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services". I have uninstalled itunes multiple times. I have tried only installing the Apple Moblie Devuce Support by doing the extract file from WinRaff. Nothing has worked. Could you please help me? I'm getting relly frusturated with this whole thing. All I want to do is download songs on to my i-pod.
Thank You,
Aleida H.I guess the short answer is don't try to pass MSI properties to the installer.
I don't think this is anything your fellow users can help with, but you might want to file a report at Bug Reporter.
tt2 -
I was prompted to download the "latest version of Firefox 9.0" and I did it. . . It's awful though.
The tabs are different - like an old style (perhaps from 1980) Even the color looks different - a lighter baby blue.
Ghads. . I would LOVE to go back to the previous look. . . may consider using something other than Firefox. . I really can't stand this look!Can you attach a screenshot to explain what you do not like?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
*https://support.mozilla.com/kb/common-questions-after-updating-firefox -
New contract - 'old style' 1980 fixed master socke...
Hi
LJ2/ socket!!
I couldn't believe my eyes, when I came home from work one day!
An ancient socket fixed behind a chest of drawers [when I requested to put on the wall above it]
But this guy from BT Openreach convinced my girlfriend that it's better to have it behind heavy piece of furniture...
just in case someone wants to look at it - me! [http://en.wikipedia.org/wiki/File:LJ_Front.jpg]
So if I want I-Plate I will have to pay again £120.
Thank you mister openreach!
Another reason I came here today;
Two years on the new contract and my average download speed only twice exceeded 1Mbps. [i know because I monitor the network]
The last time it was in November and I enjoyed +4Mbps for couple of days [so this is the true capacity of my line]
But since I remember my average download speed was solid 100-110KB/s and when I look at monitor graph it's a straight line, never up and down.
Does it mean that my line is capped?
I didn't complain to BT before - mainly because I have only bad experiences with their customer service and it cost me dearly when I have to call them so - I learn to live with that...
But now my girlfriend use it more and more and she needs fast internet for her study.
So here I am:
Router statistics, last night:
ADSL line status
Connection information
Line state Connected
Connection time 4 days, 8:41:39
Downstream 1,107 Kbps
Upstream 800 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.5
Latency type Interleaved
Noise margin (Down/Up) 7.6 dB / 8.3 dB
Line attenuation (Down/Up) 52.0 dB / 28.5 dB
Output power (Down/Up) 15.3 dBm / 12.1 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 0 / 120
CRC Errors (Down/Up) 3966 / N/A
HEC Errors (Down/Up) N/A / 187
Error Seconds (Local) 2967
Broadband Performance Tester:
1. Best Effort Test: -provides background information.
Download Speed
869 Kbps
0 Kbps 1000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 869 Kbps
For your connection, the acceptable range of speeds is 400-1000 Kbps.
Additional Information:
Your DSL Connection Rate :1104 Kbps(DOWN-STREAM), 800 Kbps(UP-STREAM)
IP Profile for your line is - 973 Kbps
2. Upstream Test: -provides background information.
Upload Speed
664 Kbps
0 Kbps 800 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 664 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 800 Kbps
I do hope I find someone who can help me.Thank you for your reply, imjolly.
Yes, this is the master socket and the only one I have access to.
There is another guy [we live in shared house] he has bt vision; he says he never go below 4Mbps
I would use your advice - but I'm not sure it is legal to fiddle with BT property.
Apparently bellwire is not the cause of my trouble since I know that my line can carry +4Mbps easily.
I want BT representative to answer few questions:
1. How was it possible in 2009 I have new line fitted with 1980 socket?
Who is responsible and how it will be fixed?
2. Is my line capped?
3. Is my line faulty? When can you check and repair it?
My recent statistics:
ps. I fixed formatting issue in my first message.
I was a complete mess, no wonder only one reply. -
DVCPRO 50 - looks like 1920 in seq settings, shrinks to 1280 after render
This is correct right. It's an anamorphic image and goes from 1920 width to 1280 after the timeline renders. ? Sounds easy enough, I've just never seen it happen before and the client is asking for this. It fools you, because the sequence setting says 1920x1080 at the top.
DVCPRO HD is an anamorphic format. 1280x1080 at 1080i. Your sequence settings, if they match your clip settings, should say exactly the same thing. FCP un-squeezes the anamorphic to preset it full screen. But it is still not full raster.
Do your sequence and clip settings match?
Shane -
How do you segment a long project and preserve HD 1920 x 1080 pixels at each step?
I'm shooting video with a Canon HF S10 in the maximum quality (1920 x 1080 i) mode. The resulting files in AVCHD format are coming into the computer and into Elements 7 okay. The desired Project output is BluRay. I want to maintain the full image quality (1920 x 1080) end-to-end (lesser quality is okay on the timeline if that all that is available). My current project is about 65 minutes long--future ones could be two hours or more. All the 100+ trimmed clips and transitions are on the timeline. Saving the Project file seems to work, but re-opening the Project takes a long time and doesn't always work. Rendering this long timeline ulitimately freezes/crashes. When the Project was much shorter, the save and reload cyle worked okay.
Per Steve's book a work around is to break the project into pieces around 10 minutes long, render and save them to AVI files, reload and merge the AVI files into a new "Master" Project and then render the whole thing to BluRay(?). Better yet he suggests outputing to a folder and burning the disc with other software. But Elements does not output BluRay to a folder. And when I experimented outputing with AVI segment files, quality dropped a lot suggesting that the 1920 x 1080 is not preserved in AVI format.
It appears that:
AVI files are just the DV 720 x 480 image quality of mini DV tape
Output to a folder in BluRay image format is not available
Elements 7 does not support breaking an HD 1920 x 1080 timeline into segments for long projects
Any ideas will be appreciated. Canon does supply a crude editing software package that is claimed to do simple cuts and transitions and produce a file that can be loaded back into the HF S10 memory for playback (distributing product on SD cards instead of BluRay is a novel possibility). I'd prefer to use Elements or a similar software product that takes me start to finish without losing any pixels.
Finally, I have a backlog of several long projects using HDV tape as a source. I want those to go to BluRay too, but not giving up any of the 1440 x 1080 pixels. I think the same limitations above apply to HDV.
After waiting several years to get this end-to-end capability, it is disappointing to find it still seems to be out of reach (maybe is just hidden).
Sometime soon, I hope Steve will write an edition that deals exclusively with the end-to-end HD (1920 x 1080) work flow including best scaling of still images, storage of image files and output to BluRay and creating slide shows using all the HD pixels (no SD compromises) again on BluRay. That of course means Adobe may need to add some tweaks in Elements 8.
Terry 9391
PS, my PC is using an Intel Core 2 Quad processor, Vista OS, 4 GB of memory, has access to several TB of HD, and a couple of GB of Ready Boost memory (does this really help?) and a 1920 x 1200 monitor.You could export each section as 1920x1080 MPEG2 using the Share>Personal Computer>MPEG option then selecting the MPEG2 1920x1080i export Preset.
You can also export as AVI... however this will be uncompressed AVI with a file size of over 1GB per minute... File>Export>Movie then in Settings under General>File Type select Microsoft AVI (not Microsoft DV AVI). Then in Video>Compressor select None, in Frame Size set 1920x1080 and in PixelAspect Ratio select Square Pixels. -
HT1379 Help! can´t get 2560 resolution in dell 2711 on macbook pro retina late 2013, only 1920...
can´t get 2560 resolution in dell 2711 on macbook pro retina late 2013, only 1920...i have the apple thunderbolt to dvi adapter and the dual dvi cable...
thanks for any helphttp://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.3- 15-dual-graphics-late-2013-retina-display-specs.html
says:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2*)
Details:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single 1080p display at up to 60 Hz, 3840x2160 at 30 Hz, or 4096x2160 at 24 Hz via HDMI. Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required? -
Is the LG 22EN33S-B 22-inch LED 1920 x 1080 VGA Monitor compatible with mac via a vga to thunderbolt adapter?
The 1080p and 1080i options only appear on the HDMI display settings, the display settings for the thunderbolt to vga adaptor has 1920 x 1080.
Via the HDMI output of the Mini via an HDMI cable to a HDMI input on the Samsung the display fills the screen but the text looks vile.
The options for picture adjustement on the samsung include fill screen as you suggest
Using the thunderbolt to VGA adaptor the text looks as it should, crisp and clear but the display is shitfted to the right.
The options for picture adjustment on the Samsung does not have the 'fill screen' option available when the VGA input is selected. However a new option called 'pc screen adjustment' appears and you can nudge the display over to the left a bit but not enough to cover the whole screen.
I remind you the pc worked perfectly 1920 x 1080 on the same VGA cable and input to the samsung.
Maybe you are looking for
-
How do I disconnect all my devices from apple id
Anyone have an idea how to "disconnect" my phones from apple id? Two iphones in our family end up sharing all the texts sent to either phone from another iphone.
-
Product Not Recognized................
I am trying to install the latest drivers for my SB X-FI and am getting the dreaded 'Product not Found' error - I cant believe this is still a problem with the installer............... I have 64-bit Vista and am using the ?XFXA_PCDRV_LB__04_0079.exe
-
How to play music in car from Iphone 5s
How do I play music from 5s in my car ? Do I need something to connect to the cigarette lighter as there is no USB.
-
Error in Master data load because of ###
Hello, I am getting an error in master data load. The problem is ####### symbols are encountered in few records. We have defined a formula to replace the ### with S in transfer structure. But still it does not replace the #### symbols and gives error
-
Email Subject Line - populating and customising
Hi, There was a forum topic called " Email Subject Line - populating - Business Catalyst in the last forum but I can't find it here... Did anyone find how to use tag's or customise the Email subject line for outgoing system emails? (E.g invoice, quo